Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Laminar film condensation on the inside of slender, rotating truncated cones.

A solution for film condensation on the inside of slender rotating truncated cones is established in the region where the half cone angle phi is close to zero and where the equation of Dhir and Lienhard (1971) is no longer valid. All the familiar assumptions used in Nusselt's theory of laminar film condensation are assumed valid, including negligible sub-cooling and momentum changes in the condensate film, no interfacial shear between the condensate and the vapor, and pure conduction within the condensate film. A Runge-Kutta numerical integration method using a digital computer was used. Results for a specific geometry are given for water condensing at 212 F on a condenser wall maintained at 70 F.

Marto, P. J.↗

Energy storage and deposition in a solar flare

X-ray pictures of a solar flare taken with the S-056 X-ray telescope aboard Skylab are interpreted in terms of flare energy deposition and storage. The close similarity between calculated magnetic-field lines and the overall structure of the X-ray core is shown to suggest that the flare occurred in an entire arcade of loops. It is found that different X-ray features brightened sequentially as the flare evolved, indicating that some triggering disturbance moved from one side to the other in the flare core. A propagation velocity of 180 to 280 km/s is computed, and it is proposed that the geometry of the loop arcade strongly influenced the propagation of the triggering disturbance as well as the storage and site of the subsequent energy deposition. Some possible physical causes for the sequential X-ray brightening are examined, and a magnetosonic wave is suggested as the triggering disturbance. 'Correct' conditions for energy release are considered

Vorpahl, J. A.↗

The internal fields coupled through apertures

Magnetic fields coupled through apertures in an aircraft structure were calculated. These fields were shown to be important since some apertures are quite large and since the waveshape of interior fields is not retarded but tends to be the same for small apertures as for that of the external magnetic field. Aperture geometry and reflecting surfaces were considered for computations of field strength and direction.

Franklin A Fisher↗

Experimental and numerical results of sound scattering by a body

The interaction of aerodynamic noise with a fuselage shaped body is discussed. A numerical technique is presented which permits the computation of the scattering of an acoustic source by a body at rest for frequencies of aeroacoustic interest. A parallel experiment is described which confirms the results of the computations. A numerical study of varying the geometry of the scattering is presented. In addition, the effect of forward motion on the mean velocity and static pressure profiles in the wake of such a body with a jet exiting from it is simulated. Experimental results are presented and a similarity law is given.

Maestrello, L.↗

Generation of orthogonal boundary-fitted coordinate systems

A method is presented for computing orthogonal boundary fitted coordinate systems for geometries with coordinate distributions specified on all boundaries. The system which has found most extensive use in generating boundary fitted grids is made up of Poisson equations, of which the functions P and Q provide a means for controlling the spacing and density of grid lines in the coordinate system. While questions remain concerning the existence and uniqueness of orthogonal systems, the generating method presented adds to the available, useful techniques for constructing these systems.

Coleman, R. M.↗

Fast Generation of body conforming grids for 3-D

A fast algorithm was developed for accurately generating boundary conforming, three dimensional, consecutively refined, computational grids applicable to arbitrary axial turbomachinery geometry. The method is based on using a single analytic function to generate two dimensional grids on a number of coaxial axisymmetric surfaces positioned between the hub and the shroud. These grids are of the "O" type and are characterized by quasi-orthogonality, geometric periodicity, and an adequate resolution throughout the flowfield. Due to the built in additional nonorthogonal coordinate stretching and shearing, the grid lines leaving the trailing of the blade end at downstream infinity, thus simplifying the numerical treatment of the three dimensional trailing vortex sheet.

Dulikravich, O.↗

A study of the Mg II k line in Beta Persei

Spectral scans of the Mg II k line in Beta Per were obtained with Copernicus during two primary eclipses. A brief description of observation in a short frame mode is given. The observed data are compared with computed line profiles based on the eclipse geometry of spherical stars. It is shown that a nonuniform circumstellar envelope, or cloud, probably is present. In one scan, a red-shifted line of P Cygni-type profile appeared, indicating the occurrence of an unusual event in the close binary system.

Chen, K.-Y.↗

Some aspects of calculating flows about three-dimensional subsonic inlets

As a consequence of the growing interest in the development of V/STOL aircraft technology, efforts are being made to create new designs for a propulsion system which can be operated over a wide range of flight speeds, incidence angles, and throttle settings. In connection with these efforts, various inlet configurations have been proposed. The high experimental costs incurred in the study of various inlet geometries, led to the employment of a computational method for the investigation of inlets. Attention is given to the computer program, paneling and surface static pressure, surface flow pattern, and the inlet flow field. The reported investigation demonstrates that useful information for initial screenings may be obtained from potential flow calculations.

Kao, H. C.↗

GRID3C: Computer program for generation of C type multilevel, three dimensional and boundary conforming periodic grids

A fast computer program, GRID3C, was developed for accurately generating periodic, boundary conforming, three dimensional, consecutively refined computational grids applicable to realistic axial turbomachinery geometries. The method is based on using two functions to generate two dimensional grids on a number of coaxial axisymmetric surfaces positioned between the centerbody and the outer radial boundary. These boundary fitted grids are of the C type and are characterized by quasi-orthogonality and geometric periodicity. The built in nonorthogonal coordinate stretchings and shearings cause the grid clustering in the regions of interest. The stretching parameters are part of the input to GRID3C. In its present version GRID3C can generate and store a maximum of four consecutively refined three dimensional grids. The output grid coordinates can be calculated either in the Cartesian or in the cylindrical coordinate system.

Dulikravich, D. S.↗

Application of improved numerical schemes

Two approaches which accelerate the solution of the steady state Navier-Stokes equations are discussed. The SIMPLER algorithm, a revised version of SIMPLE, provides a more accurate pressure field for each iteration through the momentum equations, thereby speeding convergence. PISO (Pressure Implicit Split Operator), performs a secondary correction of the velocity and pressure fields (after the typical pressure correction) which enhances convergence. Both schemes account for terms neglected in the SIMPLE approach, but do so in slightly different ways. Two dimensional driven cavity flow and flow over a step were calculated to examine the effect of geometry on the performance of these schemes. Computations were carried out on a series of progressively finer grids. The effect of relaxation number on convergence rate was analyzed, using results from SIMPLE as criteria for performance correlation. Results show: (1) the improved schemes promoted convergence by up to 60% for the driven cavity and 40% for flow over a step; (2) for the driven cavity problem, the efficiency of PISO and SIMPLER increased as the number of nodes increased; and (3) to ensure faster convergence, higher relaxation numbers must be applied.

Neely, G. H.↗

Using a commercial CAD system for simultaneous input to theoretical aerodynamic programs and wind-tunnel model construction

The Computer Aided Design (CAD) system's common geometry database was used to generate input for theoretical programs and numerically controlled (NC) tool paths for wind tunnel part fabrication. This eliminates the duplication of work in generating separate geometry databases for each type of analysis. Another advantage is that it reduces the uncertainty due to geometric differences when comparing theoretical aerodynamic data with wind tunnel data. The system was adapted to aerodynamic research by developing programs written in Design Analysis Language (DAL). These programs reduced the amount of time required to construct complex geometries and to generate input for theoretical programs. Certain shortcomings of the Design, Drafting, and Manufacturing (DDM) software limited the effectiveness of these programs and some of the Calma NC software. The complexity of aircraft configurations suggests that more types of surface and curve geometry should be added to the system. Some of these shortcomings may be eliminated as improved versions of DDM are made available.

Enomoto, F.↗

The physics of a single-event upset in integrated circuits: A review and critique of analytical models for charge collection

When an energetic particle (kinetic energy 0.5 MeV) originating from a radioactive decay or a cosmic ray transverse the active regions of semiconductor devices used in integrated circuit (IC) chips, it leaves along its track a high density electron hole plasma. The subsequent decay of this plasma by drift and diffusion leads to charge collection at the electrodes large enough in most cases to engender a false reading, hence the name single-event upset (SEU). The problem of SEU's is particularly severe within the harsh environment of Jupiter's radiation belts and constitutes therefore a matter of concern for the Galileo mission. The physics of an SEU event is analyzed in some detail. Owing to the predominance of nonlinear space charge effects and the fact that positive (holes) and negative (electrons) charges must be treated on an equal footing, analytical models for the ionized-charge collection and their corresponding currents as a function of time prove to be inadequate even in the simplest case of uniformly doped, abrupt p-n junctions in a one-dimensional geometry. The necessity for full-fledged computer simulation of the pertinent equations governing the electron-hole plasma therefore becomes imperative.

Vonroos, O.↗

Results of an interlaboratory fatigue test program conducted on alloy 800H at room and elevated temperatures

The experimental approach adopted for low cycle fatigue tests of alloy 800H involved the use of electrohydraulic test systems, hour glass geometry specimens, diametral extensometers, and axial strain computers. Attempts to identify possible problem areas were complicated by the lack of reliable data for the heat of Alloy 800H under investigation. The method adopted was to generate definitive test data in an Interlaboratory Fatigue Test Program. The laboratories participating in the program were Argonne National Laboratory, Battelle Columbus, Mar-Test, and NASA Lewis. Fatigue tests were conducted on both solid and turbular specimens at temperatures of 20, 593, and 760 C and strain ranges of 2.0, 1.0, and 0.5 percent. The subject test method can, under certain circumstances, produce fatigue data which are serious in error. This approach subsequently was abandoned at General Atomic Company in favor of parallel gage length specimens and axial extensiometers.

Ellis, J. R.↗

Two Programs for Supersonic Wing Design and Analysis

COREL and W12SC3 useful in aerodynamic design and analysis of wings for supersonic speeds. COREL (Conical Relaxation) program solves nonlinear full potential equation for spanwise section of wing in crossflow plane, and option exists to correct result for nonconical geometry. W12SC3 applies lineartheory panel methods to compute solutions for wing/body configuration. Programs restricted to supersonic flows and useful for many design, analysis, and optimization applications. COREL and W12SC3 written in FORTRAN IV for batch execution.

Mason, W. H.↗

Kinematics of foldable discrete space cranes

Exact kinematic description of a NASA proposed prototype foldable-deployable discrete space crane are presented. A computer program is developed which maps the geometry of the crane once controlling parameters are specified. The program uses a building block type approach in which it calculates the local coordinates of each repeating cell and then combines them with respect to a global coordinates system.

Nayfeh, A. H.↗

Supersonic flow computations using a rectangular-coordinate finite-volume method

A numerical procedure has been developed for the computation of supersonic flows over complex conical geometries. The full potential equation is solved using a finite-volume method with a non-body-fitted rectangular grid. The only mapping done is the transformation of the spherical cross-flow plane to a flat surface using a stereographic projection. A new procedure for very thin fins is described which does not require the resolution of the fin thickness. Applications for simple cones, conical wing-bodies, wave riders and finned geometries compare favorably with existing solutions with body-fitted grids and available experimental data.

Grossman, B.↗

Results of an interlaboratory fatigue test program conducted on alloy 800H at room and elevated temperatures

The experimental approach adopted for low cycle fatigue tests of alloy 800H involved the use of electrohydraulic test systems, hour glass geometry specimens, diametral extensometers, and axial strain computers. Attempts to identify possible problem areas were complicated by the lack of reliable data for the heat of Alloy 800H under investigation. The method adopted was to generate definitive test data in an Interlaboratory Fatigue Test Program. The laboratories participating in the program were Argonne National Laboratory, Battelle Columbus, Mar-Test, and NASA Lewis. Fatigue tests were conducted on both solid and turbular specimens at temperatures of 20, 593, and 760 C and strain ranges of 2.0, 1.0, and 0.5 percent. The subject test method can, under certain circumstances, produce fatigue data which are serious in error. This approach subsequently was abandoned at General Atomic Company in favor of parallel gage length specimens and axial extensometers.

Ellis, J. R.↗

Investigation of the influence of wind shear on the aerodynamic characteristics of aircraft using a vortex-lattice method

The objective was to investigate and characterize the aerodynamic effect of shear flow through a series of sensitivity studies of the wind velocity gradients and wing planform geometry parameters. The wind shear effect was computed using a modified vortex-lattice computer program and characterized through the formulation of wind shear aerodynamic coefficients. The magnitude of the aerodynamic effect was demonstrated by computing the resultant change in the aerodynamics of a conventional wing and tail combination on a fixed flight path through a simulated microburst. The results of the study indicate that a significant amount of the control authority of an airplane may be required to counteract the wind shear induced forces and moments in the microburst environment.

Vicroy, Dan D.↗