Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Doping induced magnetism in Co-ZnS nanoparticles

Zn{sub 1-x}Co{sub x}S nanoparticles with x=0, 0.1, 0.2, and 0.3 were synthesized by the co-precipitation method using thiophenol as capping agent. The effect of Co doping on the structural, optical and magnetic properties are investigated. The X-ray diffraction patterns show single phase with cubic structure and the images of Transmission Electron Microscopy indicate an average particle size of 39 nm. Significant blue shift in the optical absorbing band edge was observed with increasing Co doping. In the Co doped samples, room-temperature (RT) magnetic hysteresis is observed and the magnetization reduces with increasing Co content. However, these samples show paramagnetic resonance instead of ferromagnetic resonance at both 300 and 80 K, suggesting that the origin of RT magnetization in these Zn{sub 1-x}Co{sub x}S nanoparticles involves with the frustration of antiferromagnetic interactions. - Graphical abstract: Figure shows the magnetization data of Zn{sub 1-x}Co{sub x}S (0.1<=x<=0.3) nanoparticles annealed at 573 K/2 h in vacuum and measured at 300 K. This interesting feature of systematic reduction in magnetization may be due to introduction of antiferromagnetic ordering with increasing 'Co' concentration which may be due to competition between the antiferromagnetic and ferromagnetic ordering within the sample. One could also observe the exchange bias effect which is an interface interaction observed in a ferromagnetic-antiferromagnetic mixture. The exchange bias field (loop shift) towards negative field was around 63 Oe for the Zn{sub 1-x}Co{sub x}S (0.1<=x<=0.3) nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of composition modification on Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} (0.0 ≤ x ≤ 0.5) nanoparticles as electrodes for lithium batteries

Graphical abstract: - Highlights: • Cation mixing was determined in the Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} biphasic series. • Nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} delivered 138 mAh/g at C/20 in lithium cells. • Low content of Ca{sup 2+} increases cell volume favoring Li{sup +} insertion in R-3c framework. • Diminution of R{sub SEI} and R{sub CT} for Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} discharged electrodes. • Fast electrode response for x = 0.35. - Abstract: The Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} series (0.0 ≤ x ≤ 0.5) was prepared by a sol–gel method. X-ray diffraction patterns showed two rhombohedral phases which coexist for intermediate compositions. Despite of the absence of a solid solution mechanism for the whole stoichiometry range, an appreciable cation mixing was observed in both phases. {sup 31}P MAS NMR spectroscopy revealed that low magnesium contents are incorporated to the calcium compound inducing changes in the ordering of the alkaline earth cations in M{sub 1} sites. Derivative plots of the voltage–capacity curves revealed two reversible regions ascribed to the reduction of Ti{sup 4+} to Ti{sup 3+}, ascribable to the subsequent insertion of lithium ions into M{sub 1} and M{sub 2} vacant sites. Capacity values as high as 138 mAh/g after the first discharge were monitored for nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} at C/20. Cell cycling under successive kinetic rates revealed a good capacity retention for samples with x = 0.15 and 0.25. Impedance spectra were recorded in lithium cells discharged after different number of cycles at different C rates. The increase in charge transfer resistance was shown to be an important factor determining the electrode behavior on extended cycling.

36 MATERIALS SCIENCE↗

Alternative current conduction mechanisms of organic-inorganic compound [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4}

The [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} single crystal has been analyzed by X-ray powder diffraction patterns, differential scanning calorimetry (DSC), and electrical impedance spectroscopy. [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} crystallizes at room temperature in the monoclinic system with P2{sub 1}/{sub C} space group. Three phase transitions at T{sub 1} = 226 K, T{sub 2} = 264 K, and T{sub 3} = 297 K have been evidenced by DSC measurements. The electrical technique was measured in the 10{sup −1}–10{sup 7} Hz frequency range and 203–313 K temperature intervals. The frequency dependence of alternative current (AC) conductivity is interpreted in terms of Jonscher's law (developed). The AC electrical conduction in [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} compound is studied by two processes which can be attributed to a hopping transport mechanism: the correlated barrier hopping model in phases I, II, and III, the non-overlapping small polaron tunneling model in phase IV. The conduction mechanism is interpreted with the help of Elliot's theory, and the Elliot's parameters are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Al-doped ZnS shell as a surface shield for enhancing the stability of Cu:ZnInS/ZnS/ZnS:Al quantum dots and their application in light emitting diodes

Graphical abstract: The normalized electroluminescence spectra of Cu:ZnInS@ZnS:Al (a) and Cu:ZnInS@ZnS quantum dot based LEDs under an injection current of 10 mA for various operation times are presented. The quantum dots were mixed with same amount of silicone resin and treated at 50 °C for 30 min. - Highlights: • The self-passivated Cu:ZnInS@ZnS:Al quantum dots were synthesized successfully. • The thermal and current stability of Cu:ZnInS@ZnS:Al quantum dots were improved. • The Cu:ZnInS@ZnS:Al quantum dots had a small reduction of 20% in PL lifetime under thermal annealing from 50 °C to 250 °C. • The Cu:ZnInS@ZnS:Al quantum dot based LED had a 3% luminescence enhancement under 10 mA injection current for a long time. - Abstract: Cu:ZnInS/ZnS/ZnS:Al quantum dots (QDs) with a Cu-doped inner core and an Al-doped outer shell were synthesized in this work, exhibiting improved stability of luminescence, compared with Cu:ZnInS/ZnS/ZnS QDs. The X-ray diffraction patterns and photoluminescence spectra confirmed that the Al ions were doped into the ZnS shell. The stability of Cu:ZnInS/ZnS/ZnS:Al QDs under various thermal annealing temperatures was studied by steady-state and time resolved photoluminescence spectroscopy. The Cu:ZnInS/ZnS/ZnS:Al QDs had a relatively small reduction of 20% in photoluminescence lifetime from 167 ns under thermal annealing at 50 °C to 132.8 ns at 250 °C, compared to a 55% drop for the undoped ones, indicating less thermal effect on the photoluminescence of the QDs with an Al-doped shell. The Cu:ZnInS/ZnS/ZnS:Al QD-based light emitting diodes (LEDs) had a 3% luminescence enhancement under injection current of 10 mA for 30 h, compared to a 13% reduction for the undoped QDs, suggesting improved thermal stability of photoluminescence for the QDs with Al-doped shell. Finally, Cu:ZnInS/ZnS/ZnS:Al QD-based white LEDs with good color rendering index (>80) and correlated color temperature (<4500 K) were fabricated by combining with green emitting CuInS{sub 2}/ZnS QDs. The self-passivated QDs show promises for enhancing thermal stability of QD-based LEDs in the conserved energy lighting industry.

36 MATERIALS SCIENCE↗

High-frequency millimeter wave absorption of indium-substituted ε-Fe{sub 2}O{sub 3} spherical nanoparticles (invited)

In this work, we prepared indium-substituted ε-iron oxide (ε-In{sub x}Fe{sub 2−x}O{sub 3}) spherical nanoparticles by a combination method of reverse-micelle and sol-gel techniques. The powder X-ray diffraction pattern with Rietveld analysis shows that ε-In{sub x}Fe{sub 2−x}O{sub 3} has an orthorhombic crystal structure (space group: Pna2{sub 1}), and the In{sup 3+} ions mainly replace the Fe{sup 3+} ions at B site among the four nonequivalent Fe{sup 3+} sites (A–D sites). The magnetic measurements show that the coercive field (H{sub c}) at 300 K decreases with increasing x, i.e., H{sub c} = 21.9 kOe (x = 0), 12.2 kOe (x = 0.04), 11.6 kOe (x = 0.09), 7.8 kOe (x = 0.13), and 5.9 kOe (x = 0.18). Millimeter wave absorption was measured by terahertz time-domain spectroscopy, and the decrease of resonance frequency (f{sub r}) is observed, i.e., f{sub r} = 182 GHz (x = 0), 160 GHz (x = 0.04), 143 GHz (x = 0.09), 123 GHz (x = 0.13), and 110 GHz (x = 0.18). This decrease in the f{sub r} value is understood by the decrease of magnetic anisotropy, which is caused by the replacement of Fe{sup 3+} (S = 5/2) with nonmagnetic In{sup 3+} (S = 0) at B site contributing to the magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of structural and ferromagnetic resonance properties of spinel lithium ferrite (LiFe{sub 5}O{sub 8}) single crystals

The effect of B-site cation ordering on the room temperature structural and ferromagnetic resonance (FMR) properties of single crystal spinel lithium ferrite (LiFe{sub 5}O{sub 8}, LFO) have been investigated. A detailed microstructural analysis is done through X-ray diffraction, polarized Raman spectroscopy, and transmission electron microscopy (TEM) to examine the effect of post-annealing on the B-site cation ordering. The X-ray diffraction pattern of the as-grown crystal indicates a disordered state of the crystal. However, the annealed sample shows additional superlattice reflections corresponding to the ordered phase. This ordering is further confirmed by Raman spectra and TEM images, which reveal ordering of Li and Fe ions at the octahedral sites contrasting with the relatively high degree of octahedral site disorder in the as-grown crystal. To study the effect of B-site ordering on the magnetic properties and FMR linewidth, vibrating sample magnetometry and broadband FMR measurements have been performed for both the ordered and disordered phases of lithium ferrite. The value of saturation magnetization for both phases is ∼290 emu/cm{sup 3}. A single mode FMR profile is observed for both phases with little distortion. The linewidth characteristics of the ordered and disordered phases of lithium ferrite phases are compared, and it is observed that the linewidth is independent of the cation ordering. Both the phases exhibit a low linewidth (∼26 Oe at 30 GHz) and the effective damping parameter for the as-grown and annealed samples is determined to be 0.0021 ± 0.0001.

36 MATERIALS SCIENCE↗

Effect of isovalent substitution on microstructure and phase transition of LaNb{sub 1−x}M{sub x}O{sub 4} (M=Sb, V or Ta; x=0.05–0.3)

LaNb{sub 1−x}M{sub x}O{sub 4} oxides with pentavalent elements of different ionic sizes (M=Sb, Ta and V, x=0.05–0.3) were synthesized by the solid state reaction method. Special interest was devoted to the antimony substituted lanthanum niobate which is a new material in this group. Rietveld analysis of the X-ray diffraction patterns was used to determine the influence of the material composition on unit cell parameters. On the basis of dilatometric measurements phase transition temperatures and thermal expansion coefficients of the studied materials were determined. It was shown that with increasing concentration of Sb the phase transition temperature decreases. Thermal expansion coefficient of the antimony substituted samples above the transition temperature is in the range from 8.1 to 9.1×10{sup −6} 1/K, whereas below the transition temperature the TEC value is between 14 and 17.3×10{sup −6} 1/K. Influence of Ta, V and Sb substitutions on the microstructure and grain size was studied. - Graphical abstract: Substitution of niobium by other pentavalent elements in LaNbO{sub 4} leads to change in phase transition temperature. In case of Sb substituent a shift of phase transition into the lower temperature region is observed. LaNb{sub 0.7}Sb{sub 0.3}O{sub 4} substitution allows to achieve material with tetragonal crystal structure at room temperature and no phase transition up to 1000 °C. - Highlights: • Antimony doped lanthanum niobate was successfully synthesized by solid state synthesis method. • The structural properties have been investigated by XRD and SEM. • The influence of doping on phase transition temperature has been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag{sub 2}O dependent up-conversion luminescence properties in Tm{sup 3+}/Er{sup 3+}/Yb{sup 3+} co-doped oxyfluorogermanate glasses

Up-conversion (UC) luminescence properties of Ag/Tm{sup 3+}/Er{sup 3+}/Yb{sup 3+} co-doped oxyfluorogermanate glasses have been studied to assess the effective role of silver nanoparticles as a sensitizer for Tm{sup 3+} and Er{sup 3+} ions. The X-ray diffraction patterns obtained in this work do not reveal any crystalline phase in the glass. However, the absorption spectra reveal that surface plasmons resonance band of Ag undergoes a distinct split with two maxima and a very broad absorption peak with a background that extends toward the near infrared (NIR) with the increasing of Ag{sub 2}O added concentration. Transmission electron microscope images confirm that silver nanoparticles have been precipitated from matrix glasses and show their distribution, size, and shapes. In addition, changes in UC luminescence intensity of four emission bands 476, 524, 546, and 658 nm corresponding to {sup 1}G{sub 4} → {sup 3}H{sub 6} (Tm{sup 3+}), ({sup 2}H{sub 11/2}, {sup 4}S{sub 3/2}) → {sup 4}I{sub 15/2} (Er{sup 3+}), and {sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} (Er{sup 3+}) transitions, respectively, as a function of silver addition to the base composition have been measured under 980 nm excitation. It is confirmed that Ag{sub 2}O added concentration plays an important role in increasing the UC luminescence intensity; however, further increase in Ag{sub 2}O added concentration reduces the intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of ZnO nanorod–nanosheet composite via facile hydrothermal method and their photocatalytic activities under visible-light irradiation

ZnO composite films consisting of ZnO nanorods and nanosheets were prepared by low-temperature hydrothermal processing at 80 °C on seeded glass substrates. The seed layer was coated on glass substrates by sol–gel dip-coating and pre-heated at 300 °C for 10 min prior to hydrothermal growth. The size of the grain formed after pre-heat treatment was ∼40 nm. A preferred orientation seed layer at the c-axis was obtained, which promoted vertical growth of the ZnO nanorod arrays and formation of the ZnO nanosheets. X-ray diffraction patterns and high-resolution transmission electron microscope (HR-TEM) images confirmed that the ZnO nanorods and nanosheets consist of single crystalline and polycrystalline structures, respectively. Room temperature photoluminescence spectra of the ZnO nanorod–nanosheet composite films exhibited band-edge ultraviolet (UV) and visible emission (blue and green) indicating the formation of ZnO crystals with good crystallinity and are supported by Raman scattering results. The formation of one-dimensional (1D) ZnO nanorod arrays and two-dimensional (2D) ZnO nanosheet films using seeded substrates in a single low-temperature hydrothermal step would be beneficial for realization of device applications that utilize substrates with limited temperature stability. The ZnO nanorods and nanosheets composite structure demonstrated higher photocatalytic activity during degradation of aqueous methylene blue under visible-light irradiation. -- Graphical abstract: Schematic illustration of ZnO nanorod–nanosheet composite structure formation by hydrothermal at low-temperature of 80 °C against time. Highlights: • Novel simultaneous formation of ZnO nanorods and nanosheets composite structure. • Facile single hydrothermal step formation at low-temperature. • Photoluminescence showed ultraviolet and visible emission. • Feasible application on substrates with low temperature stability. • Improved photocatalytic activity under visible-light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, phase composition modification, and optical properties of Ce{sup 3+}/Tb{sup 3+} activated KGdF{sub 4} and GdF{sub 3} submicrocrystals

Ce{sup 3+}/Tb{sup 3+} co-doped series of samples have been synthesized based on a citric acid assisted hydrothermal method. By controlling the hydrothermal treating time, the samples evolve from the Ce{sup 3+}/Tb{sup 3+} co-doped cubic phase KGdF{sub 4} with spherical morphology into the Ce{sup 3+}/Tb{sup 3+} co-doped orthorhombic phase GdF{sub 3} with rhombic shape finally. The X-ray diffraction data illustrate the phase composition modification process of the samples. The field emission scanning electron microscopy and the transmission electron microscopy images suggest the transformation in the morphology of final products. The spectra of the energy-dispersive spectroscopy reveal the constituents of the samples. And the selected area electronic diffraction patterns prove the crystalline phases of the samples. Based on previous studies and the experimental data, one possible phase composition modification process has been summarized. The photoluminescence excitation and emission spectra and the luminescent dynamic decay curves demonstrate the variations in optical properties of the Ce{sup 3+}/Tb{sup 3+} co-doped final products. - Graphical abstract: Schematic illustration for the phase composition modification from the Ce{sup 3+}/Tb{sup 3+} doped KGdF{sub 4} to the Ce{sup 3+}/Tb{sup 3+}doped GdF{sub 3} with multiform morphologies and different sizes. (C presents cubic phase, H presents hexagonal phase, and O presents orthorhombic phase.) Highlights: Black-Right-Pointing-Pointer The samples were synthesized by a hydrothermal method. Black-Right-Pointing-Pointer The samples evolved from the cubic phase KGdF{sub 4} into the orthorhombic phase GdF{sub 3}. Black-Right-Pointing-Pointer The morphology evolved from the spherical shape into the rhombic shape finally. Black-Right-Pointing-Pointer A possible phase composition modification process was summarized. Black-Right-Pointing-Pointer The optical properties of final products were compared and studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alternative current conduction mechanisms of organic-inorganic compound [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4}

[N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} has been studied by X-ray powder diffraction patterns, differential scanning calorimetry (DSC), and impedance spectroscopy. The [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} hybrid compound is crystallized at room temperature (T ≈ 300 K) in the orthorhombic system with Pnma space group. Five phase transitions (T{sub 1} = 255 K, T{sub 2} = 282 K, T{sub 3} = 302 K, T{sub 4} = 320 K, and T{sub 5} = 346 K) have been proved by DSC measurements. The electrical technique was measured in the 10{sup −1}-10{sup 7} Hz frequency range and 233–363 K temperature interval. The frequency dependence of alternative current (AC) conductivity is interpreted in terms of Jonscher's law. The AC electrical conduction in [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} is analyzed by different processes, which can be attributed to several models: the correlated barrier hopping model in phase I, the overlapping large polaron tunneling model in phase II, the quantum mechanical tunneling model in phase IV, and the non-overlapping small polaron tunneling model in phases III, V, and VI. The conduction mechanism is studied with the help of Elliot's theory, and the Elliot's parameters are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain mediated coupling in magnetron sputtered multiferroic PZT/Ni-Mn-In/Si thin film heterostructure

The strain mediated electrical and magnetic properties were investigated in PZT/Ni-Mn-In heterostructure deposited on Si (100) by dc/rf magnetron sputtering. X-ray diffraction pattern revealed that (220) orientation of Ni-Mn-In facilitate the (110) oriented tertragonal phase growth of PZT layer in PZT/Ni-Mn-In heterostructure. A distinctive peak in dielectric constant versus temperature plots around martensitic phase transformation temperature of Ni-Mn-In showed a strain mediated coupling between Ni-Mn-In and PZT layers. The ferroelectric measurement taken at different temperatures exhibits a well saturated and temperature dependent P-E loops with a highest value of P{sub sat}~55 μC/cm² obtained during martensite-austenite transition temperature region of Ni-Mn-In. The stress induced by Ni-Mn-In layer on upper PZT film due to structural transformation from martensite to austenite resulted in temperature modulated Tunability of PZT/Ni-Mn-In heterostructure. A tunability of 42% was achieved at 290 K (structural transition region of Ni-Mn-In) in these heterostructures. I-V measurements taken at different temperatures indicated that ohmic conduction was the main conduction mechanism over a large electric field range in these heterostructures. Magnetic measurement revealed that heterostructure was ferromagnetic at room temperature with a saturation magnetization of ~123 emu/cm³. Such multiferroic heterostructures exhibits promising applications in various microelectromechanical systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and physical properties of Re substituted B-site ordered and disordered SrCo{sub 1-x}Re{sub x}O{sub 3-{delta}} (x=0.1, 0.25, 0.5)

Synthesis conditions, structural, magnetic and transport properties have been studied for SrCo{sub 1-x}Re{sub x}O{sub 3-{delta}} samples with x=0.1, 0.25, 0.5. SrCo{sub 0.9}Re{sub 0.1}O{sub 3-{delta}} forms in air and remains stable on cooling indicating that small amounts of Re{sup 7+} stabilize a B-site disordered Pm-3m phase inhibiting formation of a hexagonal phase observed for SrCoO{sub 3-{delta}}. After oxygenation SrCo{sub 0.9}Re{sub 0.1}O{sub 2.94} becomes ferromagnetic below 125 K and shows metallic-like conductivity with moderate magnetoresistance at low temperatures. Fully oxygenated double perovskite Sr{sub 2}CoReO{sub 6} (x=0.5) forms under reducing conditions and is tetragonal at room temperature. A hysteretic transition to the antiferromagnetic state at low temperatures ({approx}50-60 K) is coupled with a drastic change of electronic and thermal properties. Contrary to previous reports [A. Nag et al., Chem. Mater. 20(13) (2008) 4420-4424] SrCo{sub 0.75}Re{sub 0.25}O{sub 3} is not a partially cation ordered Sr{sub 4}Co{sub 3}ReO{sub 12} phase, but a mixture of two structural and magnetic phases with disordered SrCo{sub 1-xd}Re{sub xd}O{sub 3} and ordered SrCo{sub 1-xo}Re{sub xo}O{sub 3} compositions where xd>0.1 and xo<0.5. - Graphical abstract: Neutron diffraction pattern for SrCo{sub 0.75}Re{sub 0.25}O{sub 3}. SrCo{sub 0.75}Re{sub 0.25}O{sub 3} is not a partially cation ordered Sr{sub 4}Co{sub 3}ReO{sub 12} phase, but a mixture of two structural and magnetic phases with disordered SrCo{sub 1-xd}Re{sub xd}O{sub 3} and ordered SrCo{sub 1-xo}Re{sub xo}O{sub 3} compositions where xd>0.1 and xo<0.5. Highlights: Black-Right-Pointing-Pointer SrCo{sub 0.9}Re{sub 0.1}O{sub 2.94} is a B-site disordered cubic Pm-3m phase. Black-Right-Pointing-Pointer SrCo{sub 0.9}Re{sub 0.1}O{sub 2.94} is ferromagnetic below 125 K with metallic-like conductivity. Black-Right-Pointing-Pointer Sr{sub 2}CoReO{sub 6} is tetragonal at room temperature and antiferromagnetic below {approx}50-60 K. Black-Right-Pointing-Pointer SrCo{sub 0.75}Re{sub 0.25}O{sub 3} is not a partially cation ordered Sr{sub 4}Co{sub 3}ReO{sub 12} phase. Black-Right-Pointing-Pointer SrCo{sub 0.75}Re{sub 0.25}O{sub 3} is a mixture of disordered and ordered perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bi{sub 1−x}Nb{sub x}O{sub 1.5+x} (x=0.0625, 0.12) fast ion conductors: Structures, stability and oxide ion migration pathways

A combined experimental and computational study of Bi{sub 1−x}Nb{sub x}O{sub 1.5+x} (x=0.0625 and 0.12) has been carried out using laboratory X-ray, neutron and electron diffraction, impedance measurements and ab-initio molecular dynamics. We demonstrate that Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625}, previously reported to adopt a cubic fluorite-type superstructure, can form two different polymorphs depending on the synthetic method: a metastable cubic phase is produced by quenching; while slower cooling yields a stable material with a tetragonal √2×√2×1 superstructure, which undergoes a reversible phase transition into the cubic form at ~680 °C on subsequent reheating. Neutron diffraction reveals that the tetragonal superstructure arises mainly from ordering in the oxygen sublattice, with Bi and Nb remaining disordered, although structured diffuse scattering observed in the electron diffraction patterns suggests a degree of short-range ordering. Both materials are oxide ion conductors. On thermal cycling, Bi{sub 0.88}Nb{sub 0.12}O{sub 1.62} exhibits a decrease in conductivity of approximately an order of magnitude due to partial transformation into the tetragonal phase, but still exhibits conductivity comparable to yttria-stabilised zirconia (YSZ). Ab-initio molecular dynamics simulations performed on Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} show that oxide ion diffusion occurs by O{sup 2−} jumps between edge- and corner-sharing OM{sub 4} groups (M=Bi, Nb) via tetrahedral □M{sub 4} and octahedral □M{sub 6} vacancies. - Graphical abstract: Oxide ion migration in tetragonal Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} occurs by O{sup 2−} jumps between edge- and corner-sharing OM{sub 4} groups (M=Bi, Nb) via tetrahedral M{sub 4} and octahedral M{sub 6} vacancies. - Highlights: • Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} adopts a tetragonal √2×√2×1 fluorite superstructure. • Superstructure is due to ordering in the O-sublattice, with Bi/Nb disordered. • Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} is a good oxide ion conductor. • O{sup 2−} jump between OM{sub 4} groups (M=Bi, Nb) via tetrahedral and octahedral vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoelectric properties of the Heusler-type Fe{sub 2}VTa{sub x}Al{sub 1−x} alloys

This study focuses on the thermoelectric properties of the Heusler-type Fe{sub 2}VTa{sub x}Al{sub 1−x} alloys (0≤x≤0.12). By means of Rietveld analyses on synchrotron X-ray diffraction patterns, it is shown that the Ta atoms enter sites occupied by V atoms in the stoichiometric Fe{sub 2}VAl alloy, while the ejected V atoms are transferred to the vacant Al sites. This Ta substitution leads to an improvement of the n-type thermoelectric properties owing to two mechanisms. On the one hand, the atoms position in the structure leads to an off-stoichiometric effect such as already observed in V-rich Fe{sub 2}V{sub 1+y}Al{sub 1−y} compounds: the Seebeck coefficient is increased towards negative absolute values and the electrical resistivity is decreased, with a large shift of their peak temperature towards higher temperature. The maximum power factor is 6.5 × 10{sup −3} W/mK{sup 2} for x = 0.05 at 340 K. On the other hand, the heavy element Ta substitution combined with this off-stoichiometric effect leads to a large decrease of the thermal conductivity, owing to an increase of the scattering events. Consequently, the dimensionless figure of merit is seen to reach higher values than for the Fe{sub 2}V{sub 1+y}Al{sub 1−y} alloys, i.e., 0.21–0.22 around 400–500 K for x = 0.05 and 500 K for x = 0.08.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Attractive Improvement in Structural, Magnetic, Optical, and Antimicrobial Activity of Silver Delafossite by Fe/Cr Doping

This paper presented a novel method of AgX O{sub 2} (X = Fe or Cr) delafossite using flash auto-combustion technique. X-ray diffraction pattern (XRD) clarified single-phase structure. The morphology was analyzed by high-resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). The composition of the samples was determined using energy dispersive X-ray (EDX) analysis. The particle size estimated from HRTEM, FESEM, and XRD analyses revealed that the samples were in the nanoscale range. The magnetic hysteresis loop of the samples was measured at room temperature (300 K) and at low temperatures (200 and 100 K). Rare behavior by shifting the hysteresis loop horizontally was observed for AgCrO{sub 2} delafossite at low temperatures (200 and 100 K). The optical properties were measured for the investigated samples. The antimicrobial study promoted that AgFeO{sub 2} delafossite had a strong antibacterial activity against Gram-positive and Gram-negative bacteria than that of AgCrO{sub 2} delafossite. However, no activity appeared for both samples against fungus micro-organisms. As a result, AgFeO{sub 2} delafossite could be applied in cancer diagnoses, biomedical applications, and energy storage in solar cell. Moreover, AgCrO{sub 2} delafossite could be applied as a photocathode in a dye-sensitized solar cell and biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimentally driven atomistic model of 1,2 polybutadiene

We present an efficient method of combining wide angle neutron scattering data with detailed atomistic models, allowing us to perform a quantitative and qualitative mapping of the organisation of the chain conformation in both glass and liquid phases. The structural refinement method presented in this work is based on the exploitation of the intrachain features of the diffraction pattern and its intimate linkage with atomistic models by the use of internal coordinates for bond lengths, valence angles, and torsion rotations. Atomic connectivity is defined through these coordinates that are in turn assigned by pre-defined probability distributions, thus allowing for the models in question to be built stochastically. Incremental variation of these coordinates allows for the construction of models that minimise the differences between the observed and calculated structure factors. We present a series of neutron scattering data of 1,2 polybutadiene at the region 120–400 K. Analysis of the experimental data yields bond lengths for Cî—¸C and C î—» C of 1.54 Å and 1.35 Å, respectively. Valence angles of the backbone were found to be at 112° and the torsion distributions are characterised by five rotational states, a three-fold trans-skew± for the backbone and gauche± for the vinyl group. Rotational states of the vinyl group were found to be equally populated, indicating a largely atactic chan. The two backbone torsion angles exhibit different behaviour with respect to temperature of their trans population, with one of them adopting an almost all trans sequence. Consequently, the resulting configuration leads to a rather persistent chain, something indicated by the value of the characteristic ratio extrapolated from the model. We compare our results with theoretical predictions, computer simulations, RIS models and previously reported experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

[N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4}: Ferroelectric properties and characterization of phase transitions by Raman spectroscopy

The X-ray powder diffraction pattern shows that at room temperature, [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} is crystallized in the orthorhombic system with Pnma space group. The phase transitions at T{sub 1} = 255 K, T{sub 2} = 282 K, T{sub 3} = 302 K, T{sub 4} = 320 K, and T{sub 5} = 346 K have been confirmed by the differential scanning calorimetry. The electrical technique was measured in the 10{sup −1}–10{sup 7 }Hz frequency range and 233–363 K temperature intervals. The temperature dependence of the dielectric constant at different temperatures proved that this compound is ferroelectric below 282 K. Besides, [N(CH{sub 3}){sub 3 }H]{sub 2}ZnCl{sub 4} shows classical ferroelectric behaviour near curie temperature. In order to characterize the phase transitions, Raman spectra have been recorded in the temperature range of 233–383 K and the frequency range related to the internal and external vibrations of the cations and anions (90–4000 cm{sup −1}). The temperature dependence of the Raman line shifts ν and the half-width Δν detects all phase transitions and confirms their nature, especially at 282 K that corresponds to the ferroelectric-paraelectric phase transition.

36 MATERIALS SCIENCE↗