Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Energy Band Structure and Optical Response Function of Icosahedral B12As2: A Spectroscopic Ellipsometry and First-principles Calculational Study

An experimental and theoretical study on the dielectric-response function of icosahedral B{sub 12}As{sub 2} in the spectral region between 1.24 and 9.8 eV is presented. Comprehensive experimental information on the energy band structure from the analysis of features in the optical dispersion was complemented by spin-orbit first-principles calculations. The lowest indirect band gap width is 3.2 eV; the two lowest direct interband transitions are at 3.46 and 3.9 eV. High-energy critical points are assigned to specific electron transitions in the Brillouin zone and their dimensionality was determined. The static dielectric constant of B{sub 12}As{sub 2} is uniaxially anisotropic with values of 7.84 and 9.02 for polarization perpendicular and parallel to the trigonal axis. Hole and electron effective masses are derived from the band dispersions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Predicted band structures of III-V semiconductors in the wurtzite phase

While non-nitride III-V semiconductors typically have a zinc-blende structure, they may also form wurtzite crystals under pressure or when grown as nanowhiskers. This makes electronic structure calculation difficult since the band structures of wurtzite III-V semiconductors are poorly characterized. We have calculated the electronic band structure for nine III-V semiconductors in the wurtzite phase using transferable empirical pseudopotentials including spin-orbit coupling. We find that all the materials have direct gaps. Our results differ significantly from earlier ab initio calculations, and where experimental results are available (InP, InAs, and GaAs) our calculated band gaps are in good agreement. We tabulate energies, effective masses, and linear and cubic Dresselhaus zero-field spin-splitting coefficients for the zone-center states. The large zero-field spin-splitting coefficients we find may facilitate the development of spin-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and physical properties of the spinel-type phase of BeP{sub 2}N{sub 4} from all-electron density functional calculations

Using density-functional-theory-based ab initio methods, the electronic structure and physical properties of the newly synthesized nitride BeP{sub 2}N{sub 4} with a phenakite-type structure and the predicted high-pressure spinel phase of BeP{sub 2}N{sub 4} are studied in detail. It is shown that both polymorphs are wide band-gap semiconductors with relatively small electron effective masses at the conduction-band minima. The spinel-type phase is more covalently bonded due to the increased number of P-N bonds for P at the octahedral sites. Calculations of mechanical properties indicate that the spinel-type polymorph is a promising superhard material with notably large bulk, shear, and Young's moduli. Also calculated are the Be K, P K, P L{sub 3}, and N K edges of the electron energy-loss near-edge structure for both phases. They show marked differences because of the different local environments of the atoms in the two crystalline polymorphs. These differences will be very useful for the experimental identification of the products of high-pressure syntheses targeting the predicted spinel-type phase of BeP{sub 2}N{sub 4}.

36 MATERIALS SCIENCE↗

Anisotropic quasiparticle lifetimes in Fe-based superconductors

We study the dynamical quasiparticle scattering by spin and charge fluctuations in Fe-based pnictides within a five-orbital model with on-site interactions. Here, the leading contribution to the scattering rate is calculated from the second-order diagrams with the polarization operator calculated in the random-phase approximation. We find one-particle scattering rates which are highly anisotropic on each Fermi surface sheet due to the momentum dependence of the spin susceptibility and the multiorbital composition of each Fermi pocket. This fact, combined with the anisotropy of the effective mass, produces disparity between electrons and holes in conductivity, the Hall coefficient, and the Raman initial slope, in qualitative agreement with experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upper critical field of KFe2As2 under pressure: A test for the change in the superconducting gap structure

We report measurements of electrical resistivity under pressure to 5.8 GPa, magnetization to 6.7 GPa, and ac susceptibility to 7.1 GPa in KFe2As2. The previously reported change of slope in the pressure dependence of the superconducting transition temperature Tc(p) at a pressure p*~1.8 GPa is confirmed, and Tc(p) is found to be nearly constant above p* up to 7.1 GPa. The T-p phase diagram is very sensitive to the pressure conditions as a consequence of the anisotropic uniaxial pressure dependence of Tc. Across p*, a change in the behavior of the upper critical field is revealed through a scaling analysis of the slope of Hc2 with the effective mass as determined from the A coefficient of the T2 term of the temperature-dependent resistivity. We show that this scaling provides a quantitative test for the changes of the superconducting gap structure and suggests the development of a kz modulation of the superconducting gap above p* as a most likely explanation.

36 MATERIALS SCIENCE↗

Energy density matrix formalism for interacting quantum systems: a quantum Monte Carlo study

We develop an energy density matrix that parallels the one-body reduced density matrix (1RDM) for many-body quantum systems. Just as the density matrix gives access to the number density and occupation numbers, the energy density matrix yields the energy density and orbital occupation energies. The eigenvectors of the matrix provide a natural orbital partitioning of the energy density while the eigenvalues comprise a single particle energy spectrum obeying a total energy sum rule. For mean-field systems the energy density matrix recovers the exact spectrum. When correlation becomes important, the occupation energies resemble quasiparticle energies in some respects. We explore the occupation energy spectrum for the finite 3D homogeneous electron gas in the metallic regime and an isolated oxygen atom with ground state quantum Monte Carlo techniques imple- mented in the QMCPACK simulation code. The occupation energy spectrum for the homogeneous electron gas can be described by an effective mass below the Fermi level. Above the Fermi level evanescent behavior in the occupation energies is observed in similar fashion to the occupation numbers of the 1RDM. A direct comparison with total energy differences demonstrates a quantita- tive connection between the occupation energies and electron addition and removal energies for the electron gas. For the oxygen atom, the association between the ground state occupation energies and particle addition and removal energies becomes only qualitative. The energy density matrix provides a new avenue for describing energetics with quantum Monte Carlo methods which have traditionally been limited to total energies.

density matrix↗

Experimental study of the valence band of Bi 2 Se 3

The valence band of Bi 2 Se 3 is investigated with Shubnikov - de Haas measurements, galvanomagnetic and thermoelectric transport. At low hole concentration, the hole Fermi surface is closed and box-like, but at higher concentrations it develops tube-like extensions that are open. The experimentally determined density-of-states effective mass is lighter than density-functional theory calculations predict; while we cannot give a definitive explanation for this, we suspect that the theory may lack sufficient precision to compute room-temperature transport properties, such as the Seebeck coefficient, in solids in which there are Van der Waals interlayer bonds.

36 MATERIALS SCIENCE↗

Ternary chalcogenides C s 2 Z n 3 S e 4 and C s 2 Z n 3 T e 4 : Potential p -type transparent conducting materials

Here we report prediction of two new ternary chalcogenides that can potentially be used as p-type transparent conductors along with experimental synthesis and initial characterization of these previously unknown compounds, Cs 2 Zn 3 Ch 4 (Ch = Se, Te). In particular, the structures are predicted based on density functional calculations and confirmed by experiments. Phase diagrams, electronic structure, optical properties, and defect properties of Cs 2 Zn 3 Se 4 and Cs 2 Zn 3 Te 4 are calculated to assess the viability of these materials as p-type TCMs. Cs 2 Zn 3 Se 4 and Cs 2 Zn 3 Te 4 , which are stable under ambient air, display large optical band gaps (calculated to be 3.61 and 2.83 eV, respectively) and have small hole effective masses (0.5-0.77 m e ) that compare favorably with other proposed p-type TCMs. Defect calculations show that undoped Cs2Zn3Se4 and Cs2Zn3Te4 are p-type materials. However, the free hole concentration may be limited by low-energy native donor defects, e.g., Zn interstitials. Lastly, non-equilibrium growth techniques should be useful for suppressing the formation of native donor defects, thereby increasing the hole concentration.

36 MATERIALS SCIENCE↗

Temperature-driven band inversion in Pb 0.77 Sn 0.23 Se : Optical and Hall effect studies

Optical and Hall-effect measurements have been performed on single crystals of Pb₀.₇₇Sn₀.₂₃Se, a IV-VI mixed chalcogenide. The temperature dependent (10–300 K) reflectance was measured over 40–7000 cm⁻¹ (5–870 meV) with an extension to 15,500 cm⁻¹ (1.92 eV) at room temperature. The reflectance was fit to the Drude-Lorentz model using a single Drude component and several Lorentz oscillators. The optical properties at the measured temperatures were estimated via Kramers-Kronig analysis as well as by the Drude-Lorentz fit. The carriers were p-type with the carrier density determined by Hall measurements. A signature of valence intraband transition is found in the low-energy optical spectra. It is found that the valence-conduction band transition energy as well as the free carrier effective mass reach minimum values at 100 K, suggesting temperature-driven band inversion in the material. Thus, density function theory calculation for the electronic band structure also make similar predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-dependent electronic structure of an atomically heavy two-dimensional dichalcogenide

Here we report angle-resolved photoemission spectroscopic measurements of the evolution of the thickness-dependent electronic band structure of the atomically heavy two-dimensional layered dichalcogenide, tungsten diselenide ( WS e 2 ) . Our data, taken on mechanically exfoliated WS e 2 single crystals, provide direct evidence for shifting of the valence-band maximum from Γ ¯ (multilayer WS e 2 ) to K ¯ (single-layer WS e 2 ). Further, our measurements also set a lower bound on the energy of the direct band gap and provide direct measurement of the hole effective mass.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heavy surface state in a possible topological Kondo insulator: Magnetothermoelectric transport on the (011) plane of SmB 6

Motivated by the high sensitivity to Fermi surface topology and scattering mechanisms in magnetothermoelectric transport, we have measured the thermopower and Nernst effect on the (011) plane of the proposed topological Kondo insulator SmB 6 . These experiments, together with electrical resistivity and Hall effect measurements, suggest that the (011) plane also harbors a metallic surface with an effective mass on the order of 10–10 2 m 0 . The surface and bulk conductances are well distinguished in these measurements and are categorized into metallic and nondegenerate semiconducting regimes, respectively. As a result, electronic correlations play an important role in enhancing scattering and also contribute to the heavy surface state.

36 MATERIALS SCIENCE↗

Frenkel-like Wannier-Mott excitons in few-layer Pb I 2

Optical measurements and first-principles calculations of the band structure and exciton states in direct-gap bulk and few-layer PbI 2 indicate that the n = 1 exciton is Frenkel-like in nature in that its energy exhibits a weak dependence on thickness down to atomic-length scales. Results reveal large increases in the gap and exciton binding energy with a decreasing number of layers and a transition of the fundamental gap, which becomes indirect for one and two monolayers. Calculated values are in reasonable agreement with a particle-in-a-box model relying on the Wannier-Mott theory of exciton formation. In conclusion, general arguments and existing data suggest that the Frenkel-like character of the lowest exciton is a universal feature of wide-gap layered semiconductors whose effective masses and dielectric constants give bulk Bohr radii that are on the order of the layer spacing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Systematic approach for simultaneously correcting the band-gap and p - d separation errors of common cation III-V or II-VI binaries in density functional theory calculations within a local density approximation

We propose a systematic approach that can empirically correct three major errors typically found in a density functional theory (DFT) calculation within the local density approximation (LDA) simultaneously for a set of common cation binary semiconductors, such as III-V compounds, (Ga or In)X with X = N,P,As,Sb, and II-VI compounds, (Zn or Cd)X, with X = O,S,Se,Te. By correcting (1) the binary band gaps at high-symmetry points , L, X, (2) the separation of p-and d-orbital-derived valence bands, and (3) conduction band effective masses to experimental values and doing so simultaneously for common cation binaries, the resulting DFT-LDA-based quasi-first-principles method can be used to predict the electronic structure of complex materials involving multiple binaries with comparable accuracy but much less computational cost than a GW level theory. This approach provides an efficient way to evaluate the electronic structures and other material properties of complex systems, much needed for material discovery and design.

Wang, Jianwei↗

Experimental observation of incoherent-coherent crossover and orbital-dependent band renormalization in iron chalcogenide superconductors

The level of electronic correlation has been one of the key questions in understanding the nature of superconductivity. Among the iron-based superconductors, the iron chalcogenide family exhibits the strongest electron correlations. To gauge the correlation strength, we performed a systematic angle-resolved photoemission spectroscopy study on the iron chalcogenide series Fe 1+y Se x Te 1-x (0 < x < 0.59), a model system with the simplest structure. Our measurement reveals an incoherent-to-coherent crossover in the electronic structure as the selenium ratio increases and the system evolves from a weakly localized to a more itinerant state. Furthermore, we found that the effective mass of bands dominated by the d xy orbital character significantly decreases with increasing selenium ratio, as compared to the d xz /d yz orbital-dominated bands. The orbital-dependent change in the correlation level agrees with theoretical calculations on the band structure renormalization, and may help to understand the onset of superconductivity in Fe 1+y Se x Te 1-x .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic parameters from high-resolution specific heat measurements on superoptimally substituted BaFe 2 ( As 1 - x P x ) 2 single crystals

We investigate the electronic specific heat of superoptimally substituted BaFe 2 (As 1-x P x ) 2 single crystals in the superconducting state using high-resolution nanocalorimetry. From the measurements, we extract the substitution dependence of the condensation energy, superconducting gap Δ, and related microscopic parameters. We find that the anomalous scaling of the specific heat jump ΔC ∝ to T$3\atop{c}$ , found in many iron-based superconductors, in this system originates from a T c -dependent ratio Delta/k B T c in combination with a substitution-dependent density of states N(epsilon(F)). A clear enhancement is seen in the effective mass m* as the composition approaches the value that has been associated with a quantum critical point at optimum substitution. However, a simultaneous increase in the superconducting carrier concentration n s yields a penetration depth lambda that decreases with increasing T c without sharp divergence at the quantum critical point. Uemura scaling indicates that T c is governed by the Fermi temperature T F for this multiband system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗