Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fixed Base”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Proxy quality control of biomass particles using thermogravimetric analysis and Gaussian process regression models

Abstract The temperature experienced by reactants during preparation in a reactor is a key component in determining the yield and homogeneity of usable chemical products such as biomass particles. Thermocouples with sensors can be used to monitor spatial temperature gradients within reactors but these sensors are often too expensive and/or invasive. The present work proposes a strategy to identify optimal machine learning models to infer the maximum effective temperature experienced by particles during oxidative biomass torrefaction using key thermochemical combustion parameters. The maximum rate of weight loss, the corresponding temperature, and fixed carbon content on a dry‐ash‐free basis are used as literature‐based predictor variables obtained from thermogravimetric analysis. The evaluation of 24 machine‐learning models using the standard tenfold cross‐validation method suggests that the exponential Gaussian process regression (GPR) model is the most effective, followed by other GPR models. These high‐performing GPR models were also utilized to predict the effective preparation temperature distribution of reactor‐produced biomass particles under eight conditions of varying residence time and air‐to‐biomass ratio. The effective preparation temperature and residence time of individual biomass particles were then encoded into the torrefaction severity factor and used to estimate the energy yield of the reactor output as a novel quality control method. © 2023 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Estimating heterotrophic respiration at large scales: challenges, approaches, and next steps

Heterotrophic respiration (HR), the aerobic and anaerobic processes mineralizing organic matter, is a key carbon flux but one impossible to measure at scales significantly larger than small experimental plots. This impedes our ability to understand carbon and nutrient cycles, benchmark models, or reliably upscale point measurements. Given that a new generation of highly mechanistic, genomic-specific global models is not imminent, we suggest that a useful step to improve this situation would be the development of "Decomposition Functional Types" (DFTs). Analogous to plant functional types (PFTs), DFTs would abstract and capture important differences in HR metabolism and flux dynamics, allowing models to efficiently group and vary these characteristics across space and time. We argue that DFTs should be initially informed by top-down expert opinion, but ultimately developed using bottom-up, data-driven analyses, and provide specific examples of potential dependent and independent variables that could be used. We present and discuss an example clustering analysis to show how model-produced annual HR can be broken into distinct groups associated with global variability in biotic and abiotic factors, and demonstrate that these groups are distinct from already-existing PFTs. A similar analysis, incorporating observational data, could form a basis for future DFTs. Finally, we suggest next steps and critical priorities: collection and synthesis of existing data; more in-depth analyses combining open data with high-performance computing; rigorous testing of analytical results; and planning by the global modeling community for decoupling decomposition from fixed site data. These are all critical steps to build a foundation for DFTs in global models, thus providing the ecological and climate change communities with robust, scalable estimates of HR at large scales.

carbon cycle↗

Comparing two correlated C indices with right‐censored survival outcome: a one‐shot nonparametric approach

The area under the receiver operating characteristic curve is often used as a summary index of the diagnostic ability in evaluating biomarkers when the clinical outcome (truth) is binary. When the clinical outcome is right‐censored survival time, the C index, motivated as an extension of area under the receiver operating characteristic curve, has been proposed by Harrell as a measure of concordance between a predictive biomarker and the right‐censored survival outcome. In this work, we investigate methods for statistical comparison of two diagnostic or predictive systems, of which they could either be two biomarkers or two fixed algorithms, in terms of their C indices. We adopt a U ‐statistics‐based C estimator that is asymptotically normal and develop a nonparametric analytical approach to estimate the variance of the C estimator and the covariance of two C estimators. A z ‐score test is then constructed to compare the two C indices. We validate our one‐shot nonparametric method via simulation studies in terms of the type I error rate and power. We also compare our one‐shot method with resampling methods including the jackknife and the bootstrap. Simulation results show that the proposed one‐shot method provides almost unbiased variance estimations and has satisfactory type I error control and power. Finally, we illustrate the use of the proposed method with an example from the Framingham Heart Study. Copyright © 2014 John Wiley & Sons, Ltd.

Kang, Le↗

Measurement of {sup 99}Mo Yield in {sup 100}Mo(p, x) with 30 MeV Proton Irradiation of Multicomponent Submicron Particles

The radionuclide {sup 99}Mo was produced and separated in the process of irradiating powdered mixtures of molybdenum compounds and buffer particles by 30 MeV protons. The separation is based on the Szilard–Chalmers effect wherein {sup 99}Mo recoil particles are fixed in inert buffer particles. Two types of targets were investigated by using mixtures: soluble molybdenum compound–insoluble buffer and insoluble molybdenum compound–soluble buffer. {sup 99}Mo yield equal to 20% with enrichment coefficient 18.3 was obtained by using a target consisting of a mixture of submicron {sup 100}MoO{sub 3} and Al{sub 2}O{sub 3} particles; the {sup 99}Mo yield was equal to 20% and the enrichment coefficient 18.3. For a target with the composition {sup 100}MoS{sub 2} + KCl, making it possible to separate {sup 99}Mo recoil atoms directly into solution, the {sup 99}Mo yield was equal to 8.7% and the enrichment coefficient 30.7.

07 ISOTOPE AND RADIATION SOURCES↗

Error-mitigated data-driven circuit learning on noisy quantum hardware

Application-level benchmarks measure how well a quantum device performs meaningful calculations. In the case of parameterized circuit training, the computational task is the preparation of a target quantum state via optimization over a loss landscape. This is complicated by various sources of noise, fixed hardware connectivity, and generative modeling, the choice of target distribution. Gradient-based training has become a useful benchmarking task for noisy intermediate-scale quantum computers because of the additional requirement that the optimization step uses the quantum device to estimate the loss function gradient. In this work, we use gradient-based data-driven circuit learning to qualitatively evaluate the performance of several superconducting platform devices and present results that show how error mitigation can improve the training of quantum circuit Born machines with 28 tunable parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A positivity-preserving and conservative intersection-distribution-based remapping algorithm for staggered ALE hydrodynamics on arbitrary meshes

In this study, we introduce new intersection-distribution-based remapping tools for indirect staggered arbitrary Lagrangian-Eulerian (ALE) simulations of multi-material shock hydrodynamics on arbitrary meshes. In addition to conserving momentum and total energy, the three-stage remapper proposed in this work preserves non-negativity of the internal energy. At the first stage, we construct slope-limited piecewise-linear reconstructions of all conserved quantities on zones of the source mesh and perform intersection-based remap to obtain bound-preserving zonal quantities on the target mesh. At the second stage, we define bound-preserving nodal quantities of the staggered ALE discretization as convex combinations of corner quantities. The nodal internal energy is corrected in a way which keeps it non-negative, while providing exact conservation of total energy. At the final stage, we distribute the non-negative nodal internal energy to corners, zones and materials using non-negative weights. Proofs of positivity preservation are provided for each stage. This work is a natural extension of our paper [14] in which a similar intersection-distribution-based remapping procedure was employed. The original version used a nodal kinetic energy fix which did not provably ensure positivity preservation for the zonal internal energy after the final distribution stage. The new algorithm cures this potential drawback by using ‘coordinated’ limiters for piecewise-linear reconstructions, remapping the internal energy to nodes and correcting it before redistribution. The effectiveness of the new nodal fix is illustrated by numerical examples.

97 MATHEMATICS AND COMPUTING↗

A dosimetric comparison of whole-lung treatment techniques in the pediatric population

To demonstrate the dosimetric advantages and disadvantages of standard anteroposterior-posteroanterior (S-AP/PA{sub AAA}), inverse-planned AP/PA (IP-AP/PA) and volumetry-modulated arc (VMAT) radiotherapies in the treatment of children undergoing whole-lung irradiation. Each technique was evaluated by means of target coverage and normal tissue sparing, including data regarding low doses. A historical approach with and without tissue heterogeneity corrections is also demonstrated. Computed tomography (CT) scans of 10 children scanned from the neck to the reproductive organs were used. For each scan, 6 plans were created: (1) S-AP/PA{sub AAA} using the anisotropic analytical algorithm (AAA), (2) IP-AP/PA, (3) VMAT, (4) S-AP/PA{sub NONE} without heterogeneity corrections, (5) S-AP/PA{sub PB} using the Pencil-Beam algorithm and enforcing monitor units from technique 4, and (6) S-AP/PA{sub AAA[FM]} using AAA and forcing fixed monitor units. The first 3 plans compare modern methods and were evaluated based on target coverage and normal tissue sparing. Body maximum and lower body doses (50% and 30%) were also analyzed. Plans 4 to 6 provide a historic view on the progression of heterogeneity algorithms and elucidate what was actually delivered in the past. Averages of each comparison parameter were calculated for all techniques. The S-AP/PA{sub AAA} technique resulted in superior target coverage but had the highest maximum dose to every normal tissue structure. The IP-AP/PA technique provided the lowest dose to the esophagus, stomach, and lower body doses. VMAT excelled at body maximum dose and maximum doses to the heart, spine, and spleen, but resulted in the highest dose in the 30% body range. It was, however, superior to the S-AP/PA{sub AAA} approach in the 50% range. Each approach has strengths and weaknesses thus associated. Techniques may be selected on a case-by-case basis and by physician preference of target coverage vs normal tissue sparing.

61 RADIATION PROTECTION AND DOSIMETRY↗

Quantum Monte Carlo Study of π-Bonded Transition Metal Organometallics: Neutral and Cationic Vanadium–Benzene and Cobalt–Benzene Half Sandwiches

We present accurate quantum Monte Carlo (QMC) calculations that enabled us to determine the structure, spin multiplicity, ionization energy, dissociation energy, and spin-dependent electronic gaps of neutral and positively charged vanadium–benzene and cobalt–benzene systems. From total/ionization energy, we deduce a sextet (quintet) state of neutral (cationic) vanadium–benzene systems and quartet (triplet) state of the neutral (cationic) cobalt–benzene systems. Vastly different energy gaps for the two spin channels are predicted for the vanadium–benzene system and broadly similar energy gaps for the cobalt–benzene system. For this purpose, we have used a multistage combination of techniques with consecutive elimination of systematic biases except for the fixed-node approximation in QMC. Our results significantly differ from the established picture based on previous less accurate calculations and point out the importance of high-level many-body methods for predictive calculations of similar transition metal-based organometallic systems.

Chemistry↗

Utilization of lignocellulosic hydrolysates for photomixotrophic chemical production in Synechococcus elongatus PCC 7942

Abstract To meet the need for environmentally friendly commodity chemicals, feedstocks for biological chemical production must be diversified. Lignocellulosic biomass are an carbon source with the potential for effective use in a large scale and cost-effective production systems. Although the use of lignocellulosic biomass lysates for heterotrophic chemical production has been advancing, there are challenges to overcome. Here we aim to investigate the obligate photoautotroph cyanobacterium Synechococcus elongatus PCC 7942 as a chassis organism for lignocellulosic chemical production. When modified to import monosaccharides, this cyanobacterium is an excellent candidate for lysates-based chemical production as it grows well at high lysate concentrations and can fix CO 2 to enhance carbon efficiency. This study is an important step forward in enabling the simultaneous use of two sugars as well as lignocellulosic lysate. Incremental genetic modifications enable catabolism of both sugars concurrently without experiencing carbon catabolite repression. Production of 2,3-butanediol is demonstrated to characterize chemical production from the sugars in lignocellulosic hydrolysates. The engineered strain achieves a titer of 13.5 g L −1 of 2,3-butanediol over 12 days under shake-flask conditions. This study can be used as a foundation for industrial scale production of commodity chemicals from a combination of sunlight, CO 2 , and lignocellulosic sugars.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrogen generation via ammonia decomposition on highly efficient and stable Ru-free catalysts: approaching complete conversion at 450 °C

We report Hydrogen (H 2 ) is a prospective zero-carbon and high-energy-density fuel alternative to fossil fuels for generating power and clean energy. Ammonia (NH 3 ) is a promising H 2 (17.7%) carrier, which can easily overcome the challenges associated with H 2 storage and transportation. Thermocatalytic ammonia decomposition reaction (ADR) is an effective way to produce clean H 2 but it relies on the use of expensive and rare ruthenium (Ru)-based catalysts at elevated temperatures (>500 °C), hence is not sustainable and economically feasible. Herein, we report a synergistic strategy to design a heterostructured Ru-free catalyst, consisting of CoNi alloy nanoparticles well-dispersed on a MgO–CeO 2 –SrO mixed oxide support with potassium promotion. The resulting K–CoNi alloy –MgO–CeO 2 –SrO catalyst presents 97.7% and 87.5% NH 3 conversion efficiency at 450 °C at gas hourly space velocities (GHSVs) of 6000- and 12 000-mL h -1 g cat -1 , respectively. At 500 °C, the H 2 production rate (57.75 mmol g cat -1 min -1 ) becomes comparable to that of most of the reported Ru-based catalysts. The catalyst stability has been successfully demonstrated in both a fixed-bed reactor under high pressure (120 h at 5.0 bar) and a membrane reactor prototype (600 h at 1.5 bar) at 500 °C. High-temperature in situ XPS analysis, temperature-programmed desorption/reduction, and density functional theory calculations have been carried out to elucidate the possible active sites and performance enhancement mechanisms. This work highlights the importance of constructing optimal interfaces between active metal nanoparticles and oxide support for boosting the NH 3 to H 2 conversion efficiency and long-term stability.

25 ENERGY STORAGE↗

Defect formation by pristine indenter at the initial stage of nanoindentation

Nano-indentation is a sophisticated method to characterize mechanical properties of materials. This method samples a very small amount of material during each indentation. Therefore, this method is extremely useful to measure mechanical properties of nano-materials. The measurements using nanoindentation is very sensitive to the surface topology of the indenter and the indenting surfaces. The mechanisms involved in the entire process of nanoindentation require an atomic level understanding of the interplay between the indenter and the substrate. In this paper, we have used atomistic simulation methods with empirical potentials to investigate the effect of various types of pristine indenter on the defect nucleation and growth. Using molecular dynamics simulations, we have predicted the load-depth curve for conical, vickers, and sperical tip. The results are analyzed based on the coherency between the indenter tip and substrate surface for a fixed depth of 20 Å. The depth of defect nucleation and growth is observed to be dependent on the tip geometry. A tip with larger apex angle nucleates defects at a shallower depth. However, the type of defect generated is dependent on the crystalline orientation of the tip and substrate. For coherent systems, prismatic loops were generated, which released into the substrate along the close-packed directions with continued indentation. For incoherent systems, pyramidal shaped dislocation junctions formed in the FCC systems and disordered atomic clusters formed in the BCC systems. These defect nucleation and growth process provide the atomistic mechanisms responsible for the observed load-depth response during nanoindentation.

36 MATERIALS SCIENCE↗

Electron density dependence of impedance probe plasma potential measurements

In earlier works, we used spheres of various sizes as impedance probes in demonstrating a method of determining plasma potential, φ{sub p}, when the probe radius is much larger than the Debye length, λ{sub D}. The basis of the method in those works [Walker et al., Phys. Plasmas 13, 032108 (2006); ibid. 15, 123506 (2008); ibid. 17, 113503 (2010)] relies on applying a small amplitude signal of fixed frequency to a probe in a plasma and, through network analyzer-based measurements, determining the complex reflection coefficient, Γ, for varying probe bias, V{sub b}. The frequency range of the applied signal is restricted to avoid sheath resonant effects and ion contributions such that ω{sub pi} ≪ ω ≪ ω{sub pe}, where ω{sub pi} is the ion plasma frequency and ω{sub pe} is the electron plasma frequency. For a given frequency and applied bias, both Re(Z{sub ac}) and Im(Z{sub ac}) are available from Γ. When Re(Z{sub ac}) is plotted versus V{sub b}, a minimum predicted by theory occurs at φ{sub p} [Walker et al., Phys. Plasmas 17, 113503 (2010)]. In addition, Im(Z{sub ac}) appears at, or very near, a maximum at φ{sub p}. As n{sub e} decreases and the sheath expands, the minimum becomes harder to discern. The purpose of this work is to demonstrate that when using network analyzer-based measurements, Γ itself and Im(Z{sub ac}) and their derivatives are useful as accompanying indicators to Re(Z{sub ac}) in these difficult cases. We note the difficulties encountered by the most commonly used plasma diagnostic, the Langmuir probe. Spherical probe data is mainly used in this work, although we present limited data for a cylinder and a disk. To demonstrate the effect of lowered density as a function of probe geometry, we compare the cylinder and disk using only the indicator Re(Z{sub ac})

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The direct criterion of Newcomb for the ideal MHD stability of an axisymmetric toroidal plasma

A method is presented for determining the ideal magnetohydrodynamic stability of an axisymmetric toroidal plasma, based on a toroidal generalization of the method developed by Newcomb for fixed-boundary modes in a cylindrical plasma. For toroidal mode number n≠0, the stability problem is reduced to the numerical integration of a high-order complex system of ordinary differential equations, the Euler-Lagrange equation for extremizing the potential energy, for the coupled amplitudes of poloidal harmonics m as a function of the radial coordinate ψ in a straight-fieldline flux coordinate system. Unlike the cylindrical case, different poloidal harmonics couple to each other, which introduces coupling between adjacent singular intervals. A boundary condition is used at each singular surface, where m = nq and q(ψ) is the safety factor, to cross the singular surface and continue the solutions beyond it. Fixed-boundary instability is indicated by the vanishing of a real determinant of a Hermitian complex matrix constructed from the fundamental matrix of solutions, the generalization of Newcomb's crossing criterion. In the absence of fixed-boundary instabilities, an M × M plasma response matrix W P with M the number of poloidal harmonics used, is constructed from the Euler-Lagrange solutions at the plasma-vacuum boundary. This is added to a vacuum response matrix W V to form a total response matrix W T . Finally, the existence of negative eigenvalues of W T indicates the presence of free-boundary instabilities. The method is implemented in the fast and accurate DCON code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The radio continuum-star formation rate relation in WSRT sings galaxies

We present a study of the spatially resolved radio continuum-star formation rate (RC-SFR) relation using state-of-the-art star formation tracers in a sample of 17 THINGS galaxies. We use SFR surface density (Σ{sub SFR}) maps created by a linear combination of GALEX far-UV (FUV) and Spitzer 24 μm maps. We use RC maps at λλ22 and 18 cm from the WSRT SINGS survey and Hα emission maps to correct for thermal RC emission. We compare azimuthally averaged radial profiles of the RC and FUV/mid-IR (MIR) based Σ{sub SFR} maps and study pixel-by-pixel correlations at fixed linear scales of 1.2 and 0.7 kpc. The ratio of the integrated SFRs from the RC emission to that of the FUV/MIR-based SF tracers is R{sub int}=0.78±0.38, consistent with the relation by Condon. We find a tight correlation between the radial profiles of the radio and FUV/MIR-based Σ{sub SFR} for the entire extent of the disk. The ratio R of the azimuthally averaged radio to FUV/MIR-based Σ{sub SFR} agrees with the integrated ratio and has only quasi-random fluctuations with galactocentric radius that are relatively small (25%). Pixel-by-pixel plots show a tight correlation in log-log diagrams of radio to FUV/MIR-based Σ{sub SFR}, with a typical standard deviation of a factor of two. Averaged over our sample we find (Σ{sub SFR}){sub RC}∝(Σ{sub SFR}){sub hyb}{sup 0.63±0.25}, implying that data points with high Σ{sub SFR} are relatively radio dim, whereas the reverse is true for low Σ{sub SFR}. We interpret this as a result of spectral aging of cosmic-ray electrons (CREs), which are diffusing away from the star formation sites where they are injected into the interstellar medium. This is supported by our finding that the radio spectral index is a second parameter in pixel-by-pixel plots: those data points dominated by young CREs are relatively radio dim, while those dominated by old CREs are slightly more RC bright than what would be expected from a linear extrapolation. We studied the ratio R of radio to FUV/MIR-based integrated SFR as a function of global galaxy parameters and found no clear correlation. This suggests that we can use RC emission as a universal star formation tracer for galaxies with a similar degree of accuracy as other tracers, if we restrict ourselves to global or azimuthally averaged measurements. We can reconcile our finding of an almost linear RC-SFR relation and sub-linear resolved (on 1 kpc scale) RC-Σ{sub SFR} relation by proposing a non-linear magnetic field-SFR relation, B∝SFR{sub hyb}{sup 0.30±0.02}, which holds both globally and locally.

79 ASTRONOMY AND ASTROPHYSICS↗

Vector meson dominance and the {pi}{sup 0} transition form factor

It is shown that the {pi}{sup 0} transition form factor F(Q{sub 1}{sup 2},Q{sub 2}{sup 2}) differs substantially from its one-real-photon limit F(Q{sub 1}{sup 2},0) even for rather small values of Q{sub 2}{sup 2} ({approx_equal}0.1 GeV{sup 2}), which cannot be excluded in experiments with one ''untagged'' electron. It indicates that the comparison of data with theoretical calculations, which usually assume Q{sub 2}{sup 2}=0, may be untrustworthy. Our phenomenological model of the {pi}{sup 0} transition form factor is based on the vector-meson-dominance hypothesis and all its parameters are fixed by using the experimental data on the decays of vector mesons. The model soundness is checked in the two-real-photon limit, where it provides a good parameter-free description of the {pi}{sup 0}{yields}2{gamma} decay rate, and in the {pi}{sup 0} Dalitz decay. The dependence of F(Q{sub 1}{sup 2},Q{sub 2}{sup 2}) on Q{sub 1}{sup 2} at several fixed values of Q{sub 2}{sup 2} is presented and the comparison with existing data performed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crossing Symmetric Dispersion Relations for Mellin Amplitudes

We consider manifestly crossing symmetric dispersion relations for Mellin amplitudes of scalar four point correlators in conformal field theories. This allows us to set up the nonperturbative Polyakov bootstrap for the conformal field theories in Mellin space on a firm foundation, thereby fixing the contact term ambiguities in the crossing symmetric blocks. Our new approach employs certain “locality” constraints replacing the requirement of crossing symmetry in the usual fixed-t dispersion relation. Using these constraints, we show that the sum rules based on the two channel dispersion relations and the present dispersion relations are identical. Our framework allows us to connect with the conceptually rich picture of the Polyakov blocks being identified with Witten diagrams in anti-de Sitter space. We also give two sided bounds for Wilson coefficients for effective field theories in anti-de Sitter space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-G-TeP1-09: Modality-Specific Dose Gradient Modeling for Prostate IMRT Using Spherical Distance Maps of PTV and Isodose Contours

Purpose: Overlapping volume histogram (OVH) and distance-to-target histogram (DTH) calculations rely on the assumption that dose gradients are symmetric with respect to primary target volume (PTV) expansion and minimum distance to PTV surface, respectively. It is desirable to lift this assumption and instead account for achievable modality-specific dose gradients (MSDG) for a given PTV shape. Methods: From a library of 96 prostate 7-beam IMRT plans, we computed spherical distance maps (SDMs) for PTVs and 3 iso-dose contours. Each SDM contains the minimum distances between plan isocenter and the object’s surface for a fixed set of azimuthal and polar angles. We performed principal component analysis (PCA)-based missing data recovery with PTV SDM as input and a single iso-dose contour SDM as output. Repeating this process for the set of iso-dose contours sparsely reconstructed the MSDG for a given PTV. DVH points were computed from the MSDG for bladder and rectum (OARs) as a natural way of casting patient-specific geometric information into modality-specific dose space (vs. OVH and DTH where data is purely geometric). For comparison, we implemented a cumulative (c)DTH-based prediction algorithm, and produced DVH for both OARs separately. We then computed linear regressions between each method and the DVH of the original patient plan for three different OAR DVH points. Results: R-squared for MSD-Gcomputed DVH vs. original plan DVH at V90%, V80% and V60% of max dose were 0.86, 0.83, and 0.78, for bladder and 0.36, 0.52, and 0.55 for rectum, respectively; R-squared for cDTH-based predicted DVH vs. original plan DVH were 0.67, 0.81, and 0.83, for bladder and 0.44, 0.50, and 0.51, for rectum, respectively. Conclusion: By simply modeling the MSDG about a given PTV, we are able to reproduce DVHs consistent with a validated cDTH-based DVH prediction. Regression analysis suggests MSDG could further improve predictions.

60 APPLIED LIFE SCIENCES↗

Elliptic Preconditioner for Accelerating the Self-Consistent Field Iteration in Kohn--Sham Density Functional Theory

We discuss techniques for accelerating the self consistent field (SCF) iteration for solving the Kohn-Sham equations. These techniques are all based on constructing approximations to the inverse of the Jacobian associated with a fixed point map satisfied by the total potential. They can be viewed as preconditioners for a fixed point iteration. We point out different requirements for constructing preconditioners for insulating and metallic systems respectively, and discuss how to construct preconditioners to keep the convergence rate of the fixed point iteration independent of the size of the atomistic system. We propose a new preconditioner that can treat insulating and metallic system in a unified way. The new preconditioner, which we call an elliptic preconditioner, is constructed by solving an elliptic partial differential equation. The elliptic preconditioner is shown to be more effective in accelerating the convergence of a fixed point iteration than the existing approaches for large inhomogeneous systems at low temperature.

97 MATHEMATICS AND COMPUTING↗