Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

AlN thin films grown on epitaxial 3C-SiC (100) for piezoelectric resonant devices

Highly c-axis oriented heteroepitaxial aluminum nitride (AlN) films were grown on epitaxial cubic silicon carbide (3C-SiC) layers on Si (100) substrates using alternating current reactive magnetron sputtering at temperatures between approximately 300-450 deg. C. The AlN films were characterized by x-ray diffraction, scanning electron microscope, and transmission electron microscopy. A two-port surface acoustic wave device was fabricated on the AlN/3C-SiC/Si composite structure, and an expected Rayleigh mode exhibited a high acoustic velocity of 5200 m/s. The results demonstrate the potential of utilizing AlN films on epitaxial 3C-SiC layers to create piezoelectric resonant devices.

36 MATERIALS SCIENCE↗

Electrical properties and stability of p-type ZnO film enhanced by alloying with S and heavy doping of Cu

Single wurtzite p-type Zn{sub 1-y}Cu{sub y}O{sub 1-x}S{sub x} alloy films with 0.081{<=}x{<=}0.186 and 0.09{<=}y{<=}0.159 were grown on quartz reproducibly by magnetron sputtering. The alloys show very stable p-type conductivity with a hole concentration of 4.31-5.78x10{sup 19} cm{sup -3}, a resistivity of 0.29-0.34 {Omega} cm and a mobility of 0.32-0.49 cm{sup 2} V{sup -1} s{sup -1}. The p-type conductivity is attributed to substitution of Cu{sup +1} for the Zn site, and the ionization energy of the Cu{sup +1} acceptor is measured to be 53 meV, much less than that of Cu-doped ZnO reported previously. The small ionization energy is due to Cu heavy doping and increase in valence band maximum of ZnO induced by alloying with S.

36 MATERIALS SCIENCE↗

Formation of void lattice after annealing of Ge quantum dot lattice in alumina matrix

We report on the formation of a regularly ordered void lattice with a void size of about 4 nm in an alumina matrix. The voids were formed by thermal treatment of a well-ordered three-dimensional Ge quantum dot lattice formed earlier by self-assembled growth in an alumina matrix during magnetron sputtering codeposition of Ge+Al{sub 2}O{sub 3}. During the subsequent annealing the germanium atoms were lost from the film and so voids were produced. The positions of the voids are ordered in the same way as the Ge quantum dots that were present before annealing, while their sizes can be controlled by the deposition parameters.

36 MATERIALS SCIENCE↗

Plasma-enabled growth of separated, vertically aligned copper-capped carbon nanocones on silicon

The formation of vertically aligned, clearly separated, copper-capped carbon nanocones with a length of up to 500 nm and base diameter of about 150 nm via three-stage process involving magnetron sputtering, N{sub 2} plasma treatment, and CH{sub 4}+N{sub 2} plasma growth is studied. The width of gaps between the nanocones can be controlled by the gas composition. The nanocone formation mechanism is explained in terms of strong passivation of carbon in narrow gaps, where the access of plasma ions is hindered and the formation of large C{sub n}H{sub 2n+2} molecules is possible. This plasma-enabled approach can be used to fabricate nanoelectronic, nanofluidic, and optoelectronic components and devices.

36 MATERIALS SCIENCE↗

Light absorption and electrical transport in Si:O alloys for photovoltaics

Thin films (100-500 nm) of the Si:O alloy have been systematically characterized in the optical absorption and electrical transport behavior, by varying the Si content from 43 up to 100 at. %. Magnetron sputtering or plasma enhanced chemical vapor deposition have been used for the Si:O alloy deposition, followed by annealing up to 1250 deg. C. Boron implantation (30 keV, 3-30x10{sup 14} B/cm{sup 2}) on selected samples was performed to vary the electrical sheet resistance measured by the four-point collinear probe method. Transmittance and reflectance spectra have been extracted and combined to estimate the absorption spectra and the optical band gap, by means of the Tauc analysis. Raman spectroscopy was also employed to follow the amorphous-crystalline (a-c) transition of the Si domains contained in the Si:O films. The optical absorption and the electrical transport of Si:O films can be continuously and independently modulated by acting on different parameters. The light absorption increases (by one decade) with the Si content in the 43-100 at. % range, determining an optical band gap which can be continuously modulated into the 2.6-1.6 eV range, respectively. The a-c phase transition in Si:O films, causing a significant reduction in the absorption coefficient, occurs at increasing temperatures (from 600 to 1100 deg. C) as the Si content decreases. The electrical resistivity of Si:O films can be varied among five decades, being essentially dominated by the number of Si grains and by the doping. Si:O alloys with Si content in the 60-90 at. % range (named oxygen rich silicon films), are proved to join an appealing optical gap with a viable conductivity, being a good candidate for increasing the conversion efficiency of thin-film photovoltaic cell.

36 MATERIALS SCIENCE↗

Structural and charge trapping properties of two bilayer (Ge+SiO{sub 2})/SiO{sub 2} films deposited on rippled substrate

We report on structural properties and charge trapping in [(Ge+SiO{sub 2})/SiO{sub 2}]x2 films deposited by magnetron sputtering on a periodically corrugated-rippled substrate and annealed in vacuum and forming gas. The rippled substrate caused a self-ordered growth of Ge quantum dots, while annealing in different environments enabled us to separate charge trapping in quantum dots from the trapping at the dot-matrix and matrix-substrate interfaces. We show that the charge trapping occurs mainly in Ge quantum dots in the films annealed in the forming gas, while Si-SiO{sub 2} interface trapping is dominant for the vacuum annealed films.

36 MATERIALS SCIENCE↗

Deuterium retention in tungsten exposed to low-energy pure and helium-seeded deuterium plasmas

Influence of helium (He) on the deuterium (D) retention in tungsten (W) under simultaneous He-D plasma exposure was investigated. Bulk polycrystalline tungsten and two W coatings on carbon substrate, namely, plasma-sprayed tungsten and combined magnetron-sputtered and ion implanted tungsten (CMSII-W) were exposed to pure and He-seeded D plasmas generated by electron-cyclotron-resonance plasma source. The D retention in each sample was subsequently analyzed by various methods such as nuclear reaction analysis for the D depth profiling up to 6 {mu}m and thermal desorption spectroscopy for the determination of total amount of D retention. It is shown that seeding of helium into D plasma with helium ion flux fraction of 10% reduces the deuterium retention for all tungsten grades but more significant reduction was observed for polycrystalline W and less significant effect was found for W coatings. From the thermal desorption spectroscopy measurements, we conclude that the presence of He modifies the density of existing traps for D but does not modify the nature of traps. Maximum effect of a reduction in the deuterium retention due to helium seeding was observed at around 500 K for bulk polycrystalline W. Mechanisms of deuterium retention and He effect in different W materials are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diamond/AlN Thin Films for Optical Applications

In this work we report on membranes made of nanocrystalline diamond (NCD) and AlN for the use in tunable micro-optics. For the growth of the AlN and NCD thin films, magnetron sputtering and chemical vapor deposition techniques have been used, respectively. A chemical-mechanical polishing process of NCD layers has been introduced, which is crucial for the growth of c-oriented, fiber textured AlN films. AlN layers deposited on as grown and polished nanocrystalline diamond along with free standing membranes have been compared by studying microstructure, surface morphology, piezoelectrical response as well as optical properties.

36 MATERIALS SCIENCE↗

Growth of ZnO:Al thin films onto different substrates

In this paper we present some results regarding undoped and doped ZnO thin films deposited on various substrates like glass, silicon and kapton by rf magnetron sputtering. The influence of the amount of aluminum as well as the usage of different substrates on the final photovoltaic properties of the thin films is studied. For this, structural-morphological and optical investigations on the thin films are conducted. It was found that three important factors must be taken into account for adjusting the final desired application intended for the deposited thin films. These factors are: deposition conditions, the nature of both the dopant material and the substrate. A comparison study between undoped and doped case is also realized. Smooth Al doped ZnO thin films with a polycrystalline structure and a lower roughness than undoped ZnO are obtained.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe{sub 62}Co{sub 19}Ga{sub 19} films deposited on Si(100) substrates

Fe{sub 81-X}Co{sub X}Ga{sub 19} films, with x = 0-23 atom % Co, were deposited on Si(100) substrates, respectively, by the dc magnetron sputtering method. Film thickness (t{sub f}) ranged from 30 to 400 nm. We have done the following experiments on those films: saturation magnetostriction ({lambda}{sub S}), high-temperature magnetic hysteresis, x-ray diffraction (XRD), atomic force microscopy, Auger-depth profile analysis, and plane-view and/or cross-section transmission electron microscopy. Our main finding is that if x increases from 0 to 19 atom % Co, {lambda}{sub S} increases from 56 to 152 ppm, and if x continues to increase from 19 to 23 atom % Co, {lambda}{sub S} decreases. These results indicate that the addition of Co in the Fe{sub 81}Ga{sub 19} alloy is advantageous in enhancing {lambda}{sub S}, if x is the correct value. From XRD, the Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) film comprises the A2 and B2 phases. The mechanism for large enhancement of {lambda}{sub S} in Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) is related to an intrinsic origin. The t{sub f} dependence of {lambda}{sub S} for the Fe{sub 62}Co{sub 19}Ga{sub 19} films is that: [1] in the range of 110 {<=} t{sub f} {<=} 400 nm, {lambda}{sub S} increases as t{sub f} decreases; [2] in the range of 30 {<=} t{sub f} {<=} 110 nm, {lambda}{sub S} decreases as t{sub f} continues to decrease. The {lambda}{sub S} behavior in the regions [1] and [2] is explained based on the modified Neel model. Other physical properties of the Fe{sub 62}Co{sub 19}Ga{sub 19} films include the following: saturation magnetization 4{pi}M{sub S} = 1.8 - 2.0 T, coercivity H{sub C} = 35 - 64 Oe, Curie temperature T{sub C} = 597 deg. C, planar (mean) grain size D{sub P} = 29.6 nm, and columnar grain size D{sub L} {approx_equal} t{sub f}.

36 MATERIALS SCIENCE↗

Strong growth orientation dependence of strain relaxation in epitaxial (Ba,Sr)TiO{sub 3} films and the resulting dielectric properties

The growth orientation dependence of strain relaxation and the dielectric properties were investigated for (001)- and (111)-epitaxial (Ba,Sr)TiO{sub 3} films. The films were deposited on SrRuO{sub 3}/SrTiO{sub 3} and SrTiO{sub 3} substrates using rf magnetron sputtering. The residual strain was found to be remarkably different between the two orientations, although these lattice mismatches are identical; the strain relaxation of the (001)-epitaxial films is significantly slower than that of the (111)-epitaxial films and is promoted only when the growth rate is very low ({<=}5 nm/h). The observed orientation dependence is discussed with the surface energy for both growth orientations, which influences the growth mode of the films. Due to the large contrast of the strain in the (001)- and (111)-epitaxial films, the paraelectric to ferroelectric phase transition temperature of the (001)-epitaxial films is much higher than that of unstrained bulks, while the (111)-epitaxial films show a phase transition temperature corresponding to that of unstrained bulks regardless of the growth rates.

36 MATERIALS SCIENCE↗

Modulation periodicity dependent structure, stress, and hardness in NbN/W{sub 2}N nanostructured multilayer films

NbN/W{sub 2}N nano-multilayer films with a modulation periodicity, {Lambda}, ranging from 5.1 to 157.4 nm have been deposited on a Si(100) substrate by reactive magnetron sputtering in Ar/N{sub 2} mixtures. The {Lambda} dependent structural and mechanical properties for the resulting NbN/W{sub 2}N multilayers have been evaluated by means of low-angle x-ray reflectivity, x-ray diffraction, high-resolution transmission electron microscope, and nanoindentation measurements. The finding is that for films with {Lambda}{<=} 10.6 nm, fcc NbN layers are coherent with cubic W{sub 2}N layers, resulting in NbN layers and W{sub 2}N layers that are in the compressive and tensile states, respectively. In contrast, as {Lambda} is larger than 10.6 nm, a phase transition from W{sub 2}N to W occurs in the W{sub 2}N layer, which is a result of the coherent interface strain relaxation. For this case, all layers are in the compressive state, and the coherent interface disappears. The intrinsic compressive stress evolution with {Lambda} can be interpreted in terms of interface stress. The formation of coherent interface at small {Lambda} ({<=}10.6 nm) is helpful for releasing point defects in layers, leading to a low compressive stress ({<=}1.1 GPa). The hardness for the obtained multilayer film increases with decreasing {Lambda}, and approaches a maximum value of 43.7 GPa when {Lambda} is 7.4 nm. The maximum strengthen at lower {Lambda} is mainly attributed to coherent interface stresses and the modulus difference between the NbN and W{sub 2}N layers. The increase in hardness with a decrease in {Lambda} is interpreted by the Lehoczky model.

36 MATERIALS SCIENCE↗

Electronic Structure Studies of 200 MeV Ag{sup +15} Swift Heavy Ion Irradiated SnO{sub 2} Thin Films Using X-Ray Absorption Spectroscopy

Tin dioxide (SnO{sub 2}) thin films were deposited on a well cleaned sapphire single crystal substrate by rf magnetron sputtering technique. After deposition, films were irradiated by swift heavy ion (SHI) irradiation at various ion fluences. We present the X-ray absorption spectra (XAS) at the oxygen K- and Sn M{sub 5,4,} edge. The XAS pattern reveals the broadening of O K- and Sn M{sub 5,4,} edge features with increasing ion fluence. The fraction of under-coordinated surface atoms in the SnO{sub 2} thin films increases, which is attributed to the structural distortions induced by SHI irradiations.

36 MATERIALS SCIENCE↗

Huge Anisotropic Magnetoresistance In Epitaxial Sm{sub 0.53}Sr{sub 0.47}MnO{sub 3} Thin Films

In the present work we have studied the variation of LFMR as a function of the angle ({theta}) between the applied magnetic field and the plane of the film. DC magnetron sputtering was used for film preparation on LSAT single crystal substrates from Sm{sub 0.55}Sr{sub 0.45}MnO{sub 3} targets synthesized by the solid state reaction route. X-ray diffraction confirmed the epitaxial nature of these films. These films have simultaneous ferromagnetic and metal insulator transition at {approx}91 K. These films exhibit enhanced low field colossal magnetoresistance {approx}99% at 3.6 kOe at 80 K. Huge anisotropy is observed in the MR, which decreases from {approx}80% to 6% as {theta} increases from 0 to 90 deg. The evolution of the resistance as a function of time and the magnetic field at a constant temperature (T{approx_equal}77 K) has also been studied.

36 MATERIALS SCIENCE↗

Room Temperature Ferromagnetism in Cu Doped ZnO Thin Films

We report on the growth of Cu doped ZnO thin films for different Cu concentration from 0.1%, to10% by RF magnetron sputtering. The X-ray diffraction study has shown single phase wurtzite type ZnO thin films with no evidence of copper/copper oxide or any other secondary phases. Room temperature ferromagnetism was observed in RF sputtered Cu doped ZnO films with magnetic moment per Cu atom first increasing and then decreasing with an increasing Cu content. Decrease of band gap with Cu doping, indicating strong p-d mixing of O and Cu is clear by the absorption spectroscopy study. The surface morphology by AFM of pure and Cu doped ZnO thin films show average grain size of 110nm and RMS surface roughness of 2.15 nm.

36 MATERIALS SCIENCE↗

Surface acoustic wave velocity of gold films deposited on silicon substrates at different temperatures

Au thin films have been deposited by DC magnetron sputtering on Si (001) substrates at different substrate temperatures, ranging from 200 K to 450 K. With increasing temperature, the expected crystallinity and morphology of the Au thin film are clearly improved, as shown by x ray diffraction, atomic force microscopy and scanning electron microscopy experiments. Parallel to this, the surface acoustic wave propagation velocity shows a clear enhancement toward the ideal values obtained from numerical simulations of a Au thin film on Si (001) substrate. Moreover, a very thin and slightly rough interlayer between the Si (001) substrate and the Au thin film is developed for temperatures above 350 K. The composition and nature of this interlayer is not known. This interlayer may be responsible for the steep change in the structural and elastic properties of the Au thin films at the higher temperatures and possibly also for an improvement of the adhesion properties of the Au on the Si (001) substrate.

36 MATERIALS SCIENCE↗

Texture and microstructure evolution in single-phase Ti{sub x}Ta{sub 1-x}N alloys of rocksalt structure

The mechanisms controlling the structural and morphological features (texture and microstructure) of ternary transition metal nitride thin films of the Ti{sub x}Ta{sub 1-x}N system, grown by various physical vapor deposition techniques, are reported. Films deposited by pulsed laser deposition, dual cathode magnetron sputtering, and dual ion beam sputtering have been investigated by means of x-ray diffraction in various geometries and scanning electron microscopy. We studied the effects of composition, energetic, and kinetics in the evolution of the microstructure and texture of the films. We obtain films with single and mixed texture as well as films with columnar ''zone-T'' and globular type morphology. The results have shown that the texture evolution of ternary transition metal nitrides as well as the microstructural features of such films can be well understood in the framework of the kinetic mechanisms proposed for their binary counterparts, thus giving these mechanisms a global application.

36 MATERIALS SCIENCE↗