Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model discrepancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Microstructure-Based Modeling of Inner Oxygen Pressure in Solid Oxide Electrolysis Cells

One major degradation mechanism during long-term operation of solid oxide electrolysis cells (SOECs) is delamination of oxygen electrodes (OEs). The driving force for the electrode delamination could be the generated high inner oxygen pressure near the electrode-electrolyte interface during operation. However, the effects of transport properties and electrode thickness on the inner oxygen partial pressure are not well understood. Here, a microstructure-based electrochemical model which includes the conduction of electrons and oxygen ions coupled with Butler-Volmer-type chemical reactions at triple-phase-boundaries (TPBs), is employed to investigate the oxygen pressure in lanthanum strontium manganate (LSM)-based SOECs. The model is applied to both two-dimensional (2D) prototype microstructures and three-dimensional (3D) realistic microstructures, and the oxygen pressure is analyzed as a function of transport properties and electrode thickness under both potentiostatic and galvanostatic operations. The simulation results suggest strategies to suppress electrode delamination. The simulation results are compared to an analytical solution, and the discrepancies are attributed to the Butler-Volmer-type kinetics included in the microstructure-based model.

Xue, Fei↗
NASA NTRS2018

Analysis of Simulated and Experimental Noise Sources of Boeing 777 Main Gear Model via CLEAN in 3D

Previously obtained experimental and simulated phased microphone array data for the NASA 26%-scale model of a six-wheel main landing gear, with and without a toboggan-shaped noise reduction fairing, were analyzed using the CLEAN technique in three dimensions. The model is a high-fidelity representation of the Boeing 777-200 aircraft main landing gear. The reprocessing of the acoustic data was undertaken to address the deficiencies encountered in the source localization (beamform) maps and the integrated farfield spectra at mid to high frequencies in our previous study, where conventional array processing techniques were applied to the same data sets. Application of the CLEAN approach resulted in higher quality beamform maps with many of the previously observed side lobes either eliminated or suppressed significantly. As a result, integration of the experimentally and computationally based maps showed substantial improvement in the quality of the high-frequency spectral content relative to the corresponding spectra generated via conventional array processing, thus extending the good agreement achieved between the measured and predicted farfield spectra from 8 kHz to 14 kHz in model-scale frequencies. In addition, an examination of the simulated surface pressure fluctuations, off-surface flow field, and three-dimensionally constructed noise sources was conducted to determine the cause of the subtle discrepancies between measured and predicted sound pressure levels that occur in the 1,800 Hz to 4,000 Hz model-scale frequency range.

Ravetta, Patricio↗
DOE OSTI2022

Correlation between the gas-phase metallicity and ionization parameter in extragalactic H II regions

The variations of the metallicity and ionization parameter in H II regions are usually thought to be the dominant factors that produce the variations we see in the observed emission line spectra. There is an increasing amount of evidence that these two quantities are physically correlated, although the exact form of this correlation is debatable in the literature. Simulated emission line spectra from photoionized clouds provide important clues about the physical conditions of H II regions and are frequently used for deriving metallicities and ionization parameters. Through a systematic investigation on the assumptions and methodology used in applying photoionization models, we find that the derived correlation has a strong dependence on the choice of model parameters. On the one hand, models that give consistent predictions over multiple emission-line ratios yield a positive correlation between the metallicity and ionization parameter for the general population of H II regions or star-forming galaxies. On the other hand, models that are inconsistent with the data locus in high-dimensional line ratio space yield discrepant correlations when different subsets of line ratios are used in the derivation. The correlation between the metallicity and ionization parameter has a secondary dependence on the surface density of the star formation rate (SFR), with the higher SFR regions showing a higher ionization parameter but weaker correlations. The existence of the positive correlation contradicts the analytical wind-driven bubble model for H II regions. We explore assumptions in both dynamical models and photoionization models, and conclude that there is a potential bias associated with the geometry. However, this is still insufficient to explain the correlation. Mechanisms that suppress the dynamical influence of stellar winds in realistic H II regions might be the key to solving this puzzle, though more sophisticated combinations of dynamical models and photoionization models to test are required.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Radiative transfer model of dust attenuation curves in clumpy, galactic environments

The attenuation of starlight by dust in galactic environments is investigated through models of radiative transfer in a spherical, clumpy interstellar medium (ISM). We show that the attenuation curves are primarily determined by the wavelength dependence of absorption rather than by the underlying extinction (absorption+scattering) curve; the observationally derived attenuation curves cannot constrain a unique extinction curve unless the absorption or scattering efficiency is specified. Attenuation curves consistent with the “Calzetti curve” are found by assuming the silicate-carbonaceous dust model for the Milky Way (MW), but with the 2175 Å bump suppressed or absent. The discrepancy between our results and previous work that claimed the Small Magellanic Cloud dust to be the origin of the Calzetti curve is ascribed to the difference in adopted albedos; we use the theoretically calculated albedos, whereas the previous works adopted albedos derived empirically from observations of reflection nebulae. It is found that the attenuation curves calculated with the MW dust model are well represented by a modified Calzetti curve with a varying slope and UV bump strength. The strong correlation between the slope and UV bump strength, as found in star-forming galaxies at 0.5<z<2.0, is well reproduced when the abundance of the UV bump carriers is assumed to be 30%–40% of that of the MW dust; radiative transfer effects lead to shallower attenuation curves with weaker UV bumps as the ISM is more clumpy and dustier. We also argue that some local starburst galaxies have a UV bump in their attenuation curves, albeit very weak.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2019

Estimating Total Open Heliospheric Magnetic Flux

Over the solar-activity cycle, there are extended periods where significant discrepancies occur between the spacecraft-observed total (unsigned) open magnetic flux and that determined from coronal models. In this article, the total open heliospheric magnetic flux is computed using two different methods and then compared with results obtained from insitu interplanetary magnetic-field observations. The first method uses two different types of photospheric magnetic-field maps as input to the Wang–Sheeley–Arge (WSA) model: i) traditional Carrington or diachronic maps, and ii) Air Force Data Assimilative Photospheric Flux Transport model synchronic maps. The second method uses observationally derived helium and extreme-ultraviolet coronal-hole maps overlaid on the same magnetic-field maps in order to compute total open magnetic flux. The diachronic and synchronic maps are both constructed using magnetograms from the same source, namely the National Solar Observatory Kitt Peak Vacuum Telescope and Vector Spectromagnetograph. The results of this work show that the total open flux obtained from observationally derived coronal holes agrees remarkably well with that derived from WSA, especially near solar minimum. This suggests that, on average, coronal models capture well the observed large-scale coronal-hole structure over most of the solar cycle. Both methods show considerable deviations from total open flux deduced from spacecraft data, especially near solar maximum, pointing to something other than poorly determined coronal-hole area specification as the source of these discrepancies.

Wallace, S.↗
NASA NTRS1986

Derivation of photochemical information near 1 mbar from ozone and temperature data

An analysis procedure has been developed for derivation of information about the photochemical behavior of ozone near 1 mbar by explicitly accounting for the dynamical transport terms in the continuity equation for perturbations from the zonal mean. The procedure is shown to be valid using data from a numerical transport model and is then applied to LIMS ozone and temperature data, using geostrophic winds to estimate the transport terms. The data study is restricted to March at 2, 1, and 0.7 mbar. Because the temperature deviations are dynamically produced, large temperature deviations are associated with significant ozone transport terms. The anticorrelation between the deviations of ozone and temperature disappears when the transport terms are small. The derived photochemical information is compared to photochemical theory. Although there is overall agreement in the magnitude as well as the latitude, altitude, and time dependencies, discrepancies are suggested which may be related to the long-standing failure of photochemical models to calculate ozone accurately near 1 mbar. The theory suggests that the addition of Cl(x) to the stratosphere will affect the relationship of ozone and temperature at 2 and 1 mbar. Comparison of the photochemical information derived from future ozone and temperature measurements with the results of the present analysis should provide a critical test of the photochemical scheme thought to describe the behavior of odd chlorine in the stratosphere.

Douglass, Anne R.↗
DOE OSTI2017

Replicating the Z iron opacity experiments on the NIF

Here, X-ray opacity is a crucial factor of all radiation-hydrodynamics calculations, yet it is one of the least validated of the material properties in the simulation codes. Recent opacity experiments at the Sandia Z-machine have shown up to factors of two discrepancies between theory and experiment, casting doubt on the validity of the opacity models. Therefore, a new experimental opacity platform is being developed on the National Ignition Facility (NIF) not only to verify the Z-machine experimental results but also to extend the experiments to other temperatures and densities. The first experiments will be directed towards measuring the opacity of iron at a temperature of ~160 eV and an electron density of ~7 x 10 21 cm -3 . Preliminary experiments on NIF have demonstrated the ability to create a sufficiently bright point backlighter using an imploding plastic capsule and also a hohlraum that can heat the opacity sample to the desired conditions. The first of these iron opacity experiments is expected to be performed in 2017.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Probing strangeness canonical ensemble with K - , Φ(1020) and Ξ - production in Au+Au collisions at $\sqrt{^S{NN}}$ = 3 GeV

We report on the first multi-differential measurement of φ meson and Ξ - hyperon production as well as the φ/K - and φ/Ξ - ratio in Au+Au collisions at $\sqrt{^S{NN}}$ = 3 GeV with the STAR experiment under its fixed target configuration at RHIC. φ mesons and Ξ - hyperons are measured through their hadronic decay channels, φ → K+K - and Ξ - → Λπ - . The transverse kinetic energy spectra of K - , φ and Ξ - are presented in different centrality and rapidity intervals. The total production yields and the ratios within a 4π coverage are calculated and compared to thermal model predictions. A calculation within the grand canonical ensemble framework shows a clear discrepancy from our measurement. Our data favor the canonical ensemble approach employing local strangeness conservation with a small strangeness correlation length (r c ≤ 4.2 fm) in 0–10% central Au+Au collisions at $\sqrt{^S{NN}}$ = 3 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The Contributions of Shear and Turbulence to Cloud Overlap for Cumulus Clouds

The causes of vertical cloud overlap, the ratio between the cloud fraction by area and the cloud fraction by volume, are studied for fields of cumulus convection. Using large-eddy simulations, the structure of individual clouds within the cloud field is inspected and connected to the overall cloud cover of the entire cloud field. First, it is shown that the cloud overlap of the entire field can be well approximated by the total cloud overlap of the individual clouds. It is then shown that a simple maximum overlap assumption, which is commonly used for cloud fields with small layer depth, can only account for roughly half of the overlap inefficiency. This is due to the fact that maximum overlap only represents variations in cloud width as a function of depth but does not take other factors into account, most notably shear or turbulence. The effects of turbulence and wind shear on the overlap of individual clouds are first estimated as a function of cloud depth, which closes the discrepancy between observed cloud overlap and the maximum overlap assumption. Then, an empirical model is developed for the shear and turbulence contributions on overlap as a function of cloud depth and of synoptic conditions. Finally, it is shown that our model is capable of accurately predicting overlap for a large number of cloud fields and under a variety of meteorological conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Seasonal Variability in Local Carbon Dioxide Biomass Burning Sources Over Central and Eastern US Using Airborne In Situ Enhancement Ratios

We present observations of local enhancements in carbon dioxide (CO 2 ) from local emissions sources over three eastern US regions during four deployments of the Atmospheric Carbon Transport-America (ACT-America) campaign between summer 2016 and spring 2018. Local CO 2 emissions were characterized by carbon monoxide (CO) to CO 2 enhancement ratios (i.e., ΔCO/ΔCO 2 ) in air mass mixing observed during aircraft transects within the planetary boundary layer. By analyzing regional-scale variability of CO 2 enhancements as a function of ΔCO/ΔCO 2 enhancement ratios, observed relative contributions to CO 2 emissions were separated into fossil fuel and biomass burning (BB) regimes across regions and seasons. CO 2 emission contributions attributed to biomass burning (ΔCO/ΔCO 2 > 4%) were negligible during summer and fall in all regions but climbed to ∼9%–11% of observed combustion contributions in the South during winter and spring. Relative CO 2 fire emission trends matched observed winter and spring BB contributions, but conflictingly predicted similar levels of BB during the fall. Satellite fire data from MODIS and VIIRS suggested the use of higher spatial resolution fire data that might improve modeled BB emissions but were not able to explain the bulk of the discrepancy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Ion exchange behavior of astatine and bismuth

Astatine and bismuth sorption on several ion exchange resins from nitric acid media has been studied. This work covers commercially available resins Dowex 50 × 4, MP thiol, Dowex 1 × 8, and TEVA. One of the main advantages of using ion exchangers for astatine separation and purification is the absence of any organic media in the effluent in comparison with extraction chromatography resins. The behavior of the above-mentioned metals was investigated in up to 4 M HNO 3 solutions. The determined distribution coefficients are greater than 1 for all the resins studied, reaching 10 4 for MP thiol and TEVA resins. The interaction of nitric acid with an anion exchanger in Cl-form results in an exchange reaction, where AtO + chloro complexes can form. To understand the astatine behavior under these conditions, stability constants of AtOCl and AtOCl 2 – complexes have been reevaluated and discrepancy in the literature values has been eliminated. For each resin a thermodynamic model has been developed to suggest a possible mechanism of astatine sorption. Literature and new experimental data on bismuth sorption by studying resins in nitric acid media have been reviewed and a mathematical model to describe its behavior has been suggested. Furthermore, a ratio of corresponding fit functions of At and Bi assigned to the same resin and acidity has been used to estimate the separation factors of these elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pulsed photoemission induced plasma breakdown

Abstract This article characterises the effects of cathode photoemission leading to electrical discharges in an argon gas. We perform breakdown experiments under pulsed laser illumination of a flat cathode and observe Townsend to glow discharge transitions. The breakdown process is recorded by high-speed imaging, and time-dependent voltage and current across the electrode gap are measured for different reduced electric fields and laser intensities. We employ a 0D transient discharge model to interpret the experimental measurements. The fitted values of transferred photoelectron charge are compared with calculations from a quantum model of photoemission. The breakdown voltage is found to be lower with photoemission than without. When the applied voltage is insufficient for ion-induced secondary electron emission to sustain the plasma, laser driven photoemission can still create a breakdown where a sheath (i.e. a region near the electrode surfaces consisting of positive ions and neutrals) is formed. This photoemission induced plasma persists and decays on a much longer time scale ( ∼ 10 s μ s) than the laser pulse length ( 30 ps). The effects of different applied voltages and laser energies on the breakdown voltage and current waveforms are investigated. The discharge model can accurately predict the measured breakdown voltage curves, despite the existence of discrepancy in quantitatively describing the transient discharge current and voltage waveforms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Structural, electronic, vibrational, and elastic properties of graphene/ MoS 2 bilayer heterostructures

Graphene/MoS 2 van der Waals (vdW) heterostructures have promising technological applications due to their unique properties and functionalities. Many experimental and theoretical research groups across the globe have made outstanding contributions to benchmark the properties of graphene/MoS 2 heterostructures. Even though some research groups have modeled the graphene/MoS 2 heterostructures using first-principles calculations, there exist several discrepancies in the results from different theoretical research groups and the experimental findings. In the present work, we revisit this problem by means of first-principles calculations and address the existing discrepancies about the interlayer spacing between graphene and MoS 2 monolayers in graphene/MoS 2 heterostructures and about the location of Dirac points near the Fermi level. We further investigate the electronic, mechanical, and vibrational properties of the optimized graphene/MoS 2 heterostructures created using 5 x 5/4 x 4 and 4 x 4/3 x 3 supercell geometries having different magnitudes of lattice mismatch. The effect of the varying interlayer spacing on the electronic properties of heterostructures is discussed. Our phonon calculations reveal that the interlayer shear and breathing phonon modes, which are very sensitive to the weak vdW interactions, play a vital role in describing the thermal properties of the studied systems. The thermodynamic and elastic properties of heterostructures are further discussed. A systematic comparison between our results and the results reported from other research groups is presented.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Source apportionment of circum-Arctic atmospheric black carbon from isotopes and modeling

Black carbon (BC) contributes to Arctic climate warming, yet source attributions are inaccurate due to lacking observational constraints and uncertainties in emission inventories. Year-round, isotope-constrained observations reveal strong seasonal variations in BC sources with a consistent and synchronous pattern at all Arctic sites. These sources were dominated by emissions from fossil fuel combustion in the winter and by biomass burning in the summer. The annual mean source of BC to the circum-Arctic was 39 ± 10% from biomass burning. Comparison of transport-model predictions with the observations showed good agreement for BC concentrations, with larger discrepancies for (fossil/biomass burning) sources. The accuracy of simulated BC concentration, but not of origin, points to misallocations of emissions in the emission inventories. The consistency in seasonal source contributions of BC throughout the Arctic provides strong justification for targeted emission reductions to limit the impact of BC on climate warming in the Arctic and beyond.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Methodology for Measuring Blade Clearance on an Operating Utility-Scale Wind Turbine

This report describes the deployment of eleven laser sensors to measure the clearance between blades and tower in a 1.5-MW wind turbine whose rotor was mounted first in upwind and then in downwind configurations. The experimental recordings are compared to the numerical predictions generated by an aeroservoelastic model of the turbine. Good agreement is found between the two datasets, although discrepancies up to 30~cm are observed. The sources of this error are discussed. This methodology is found to be a valuable resource for the validation of the numerical predictions of the flapwise deflections of wind turbine blades. The accurate prediction of these deflections is increasingly important as wind turbines grow in size and become increasingly flexible.

17 WIND ENERGY↗
NASA NTRS1966

The neutron flux in space following a polar cap neutron event on November 15, 1960

A neutron detector flown on an Atlas pod during the 15 November 1960 solar event measured a larger neutron flux than another detector flown on a similar vehicle during a quiet solar period. The excess neutron flux at low latitudes obtained by comparing these two measurements is about an order of magnitude higher than expected from the neutron production in the atmosphere by solar protons as deduced from Lingenfelter's calculations and Webber's model for the 15 November event. It is suggested that most of the discrepancy can be accounted for by considering neutron production by energetic solar alpha particles and lowered geomagnetic cutoffs.

NEUTRON FLUX↗
NASA NTRS1972

Nonelastic interactions of nucleons and pi mesons with complex nuclei at energies below 3 GeV.

Calculation of nonelastic interactions corresponding to continuum-state transitions using the intranuclear-cascade evaporation approach. Spallation yields, energy- and angle-dependent spectra, particle multiplicities, and nonelastic cross sections are calculated for incident nucleons and pi mesons with energies below 3 GeV on complex nuclei. Comparisons with experimental data are made, and, in general, the agreement is good. Discrepancies in these comparisons are discussed with respect to the deficiencies in the model.

Bertini, H. W.↗
NASA NTRS1979

Vacuum ultraviolet spectrophotometry and effective temperatures of hot stars

Absolutely calibrated ultraviolet stellar spectra from 3100 A to the hydrogen absorption edge at 912 A were obtained on 1977 February 17 by rocket observations above Woomera, Australia. Spectra taken at 15 A resolution have been compared with the observed fluxes from OAO 2 and with recent model-atmosphere fluxes of Kurucz for five hot stars: Gamma (2) Vel, Zeta Pup, Alpha Eri, Beta Cen, and Alpha Vir. The present data give fluxes which are generally lower than those obtained from OAO 2, with the largest deviations of about 20% between 1400 and 1700 A. Agreement with the models is good, although the model fluxes are substantially larger than the observed values below 1200 A. This discrepancy is greater for the higher-temperature stars. Effective temperatures are also determined and are in good agreement with previous results.

Brune, W. H.↗