Search NASA⌕ Search

SEARCH · Search NASA

Results for “Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Monte Carlo analysis of the solar-wind modulation of galactic C-N-O at solar maximum

A previous (Moss and Giuli, 1971) Monte Carlo analysis of the solar-wind modulation of galactic cosmic-ray rigidity spectra is extended to include particles in the C-N-O group. A solar cavity 'radius' of 7 AU is found to be consistent with observations of the C-N-O component at solar maximum. The variation in modulation between solar maximum and solar minimum may be explained solely by variation of the solar cavity size, with no change in the scattering mean free path.

Moss, T. A.↗
NASA NTRS1975

Wideband phase modulator works directly on carrier

Multiplier-induced problems related to undesirable effects of the varactor multiplier on the modulation spectrum are eliminated in a modulator circuit which operates directly at the desired output frequency. The principles of operation of the new circuit are discussed and attention is given to requirements for high-Q components and the possibility of linear frequency deviation.

Rippy, R. R.↗
NASA NTRS1975

Modulation of low-energy cosmic rays

The relation between the diffusion coefficient of cosmic rays in the solar wind and the power spectrum of interplanetary magnetic field fluctuations, established in recent theories, is tested directly for low energy protons (below 80 MeV). In addition, an attempt is made to determine whether the particles are scattered by magnetic field discontinuities or by fluctuations between discontinuities. Predictions of a perturbation solution of the Fokker-Planck equation are compared with observations of the cosmic ray radial gradient. It is found that at energies between 40 and 80 MeV, galactic cosmic ray protons respond to changes in the predicted diffusion coefficients (i.e., the relationship under consideration holds at these low energies). The relation between changes in the proton flux and modulation parameters is best when the contribution of discontinuities is subtracted, which means that scattering is caused by fluctuations between discontinuities. There appears to be no distinct relation between changes in the modulation parameters and changes in the intensity of 20 to 40 MeV protons.

Sari, J. W.↗
NASA NTRS1975

Magnetic compatibility of solar electric propulsion module with spacecraft and science

An investigation has been conducted in order to assess the impact of magnetic fields generated by the propulsion module upon the scientific instrumentation of the spacecraft as proposed for the mission to comet Encke. It was found that dc magnetic fields could potentially be a threat to the magnetometer experiment, whereas ac fields could affect the plasma wave experiment instrumentation. Studies included a set of measurements, computer simulation, and mathematical analyses. Ways for achieving the compatibility of the propulsion module with science are studied and recommendations advanced.

Cowgill, R. M.↗
NASA NTRS1975

Analysis of synchronous digital-modulation schemes for satellite communication

The multipath communication channel for space communications is modeled as a multiplicative channel. This paper discusses the effects of multiplicative channel processes on the symbol error rate for quadrature modulation (QM) digital modulation schemes. An expression for the upper bound on the probability of error is derived and numerically evaluated. The results are compared with those obtained for additive channels.

Takhar, G. S.↗
NASA NTRS1975

Development of an advanced static feed water electrolysis module

A Static Feed Water Electrolysis Module (SFWEM) was developed to produce 0.92 kg/day (2.0 lb/day) of oxygen (O2). Specific objectives of the program's scope were to (1) eliminate the need for feed water cavity degassing, (2) eliminate the need for subsystem condenser/separators, (3) increase current density capability while decreasing electrolysis cell power (i.e., cell voltage) requirements, and (4) eliminate subsystem rotating parts and incorporate control and monitor instrumentation. A six-cell, one-man capacity module having an active area of 0.00929 sq m (0.10 sq ft) per cell was designed, fabricated, assembled, and subjected to 111 days (2664 hr) of parametric and endurance testing. The SFWEM was successfully operated over a current density range of 0 to 1076 mA/sq cm (0 to 1000 ASF), pressures of ambient to 2067 kN/sq m (300 psia), and temperatures of ambient to 366 K (200 F). During a 94-day endurance test, the SFWEM successfully demonstrated operation without the need for feed water compartment degassing.

Schubert, F. H.↗
NASA NTRS1975

Inlet performance of the integrated Langley scramjet module

The inlet concept for the Langley Scramjet Module has been developed and proven in Langley wind tunnels over a Mach number range from 2.3 to 6.0 (flight simulation of Mach 2.6 to 7.6). This modular engine concept is designed to integrate with the airframe, which results in precompression of the engine airflow by the vehicle bow shock and additional expansion of the nozzle exhaust gas by the afterbody of the vehicle. With these integration advantages, the inlet can be designed with modest contraction ratios and fixed geometry. Also, the module nozzle exit area can be equal to the capture area, which permits the cowl to be alined with the local flow producing minimum external drag. The inlet leading edges and planar compression surfaces are swept at 48 deg, which provides spillage at low Mach numbers for starting and which reduces the pressure gradient on the top surface to permit ingestion of the vehicle forebody boundary layer into the inlet without separating. Three fuel injection struts provide for the use of a short combustor having low internal cooling requirements. Schedules for mass capture ratio, contraction ratio, and total pressure recovery are well within the acceptable range for a good scramjet propulsion device. The fixed geometry, minimum external drag design has proven to be a practical, high-performance inlet concept.

Trexler, C. A.↗
NASA NTRS1975

Instruction manual, optical effects module electronic controller and processor, model OEMCP

The OEM-1 electronic module is discussed; it is comprised of four subsystems: the signal processing and display; the stepper motor controls; the chopper controls; and the dc-dc invertor. The OEM-1 module controls the sample wheel so that the relative transmittance of the samples can be compared to the clear aperture position. The 3-1/2 digit digital voltmeter displays the clear aperture signal level as well as the ratio of the remaining sample positions relative to the clear aperture position. The sample wheel position is decoded so that the signals and ratios can be correlated to the data. The OEM is automatically reset to the I sub o on initial turn-on and can be reset to the '0' position by actuating a front panel switch. The sample wheel can be interrupted to change samples or induce a longer integration time if desired by a front panel command. Integration times from 1 - 50 seconds are provided at the front panel, and BCD data for external interfacing is provided.

Source record↗
NASA NTRS1976

NIM and CAMAC module studies

The feasibility of adapting two NIM and two CAMAC modules for space research was studied. Methods are outlined for reducing the power in each module by approximately fifty percent. Components that could not be replaced from the NASA approved component list are identified. Special problems associated with grounding, vacuum operation, temperature variations, vibration and shock are outlined. Suggested solutions for these problems are discussed.

Pierce, J. F.↗
NASA NTRS1976

Coordinated design of coding and modulation systems

Work on partial unit memory codes continued; it was shown that for a given virtual state complexity, the maximum free distance over the class of all convolutional codes is achieved within the class of unit memory codes. The effect of phase-lock loop (PLL) tracking error on coding system performance was studied by using the channel cut-off rate as the measure of quality of a modulation system. Optimum modulation signal sets for a non-white Gaussian channel considered an heuristic selection rule based on a water-filling argument. The use of error correcting codes to perform data compression by the technique of syndrome source coding was researched and a weight-and-error-locations scheme was developed that is closely related to LDSC coding.

Massey, J. L.↗
NASA NTRS1974

Shuttle user analysis (study 2.2). Volume 4: Standardized subsystem modules analysis

The capability to analyze payloads constructed of standardized modules was provided for the planning of future mission models. An inventory of standardized module designs previously obtained was used as a starting point. Some of the conclusions and recommendations are: (1) the two growth factor synthesis methods provide logical configurations for satellite type selection; (2) the recommended method is the one that determines the growth factor as a function of the baseline subsystem weight, since it provides a larger growth factor for small subsystem weights and results in a greater overkill due to standardization; (3) the method that is not recommended is the one that depends upon a subsystem similarity selection, since care must be used in the subsystem similarity selection; (4) it is recommended that the application of standardized subsystem factors be limited to satellites with baseline dry weights between about 700 and 6,500 lbs; and (5) the standardized satellite design approach applies to satellites maintainable in orbit or retrieved for ground maintenance.

Source record↗
NASA NTRS1975

FEP-TEFLON encapsulated solar cell modules Further progress

A progress report, starting with November 1973, is given in the design, development, and performance of lightweight flexible FET (Fluorinated Ethylene Propylene) encapsulated solar cell modules intended to form standardized building blocks for large roll-up or fold-up solar cell blankets with performances on the order of 100 W/sq m and 80 W/kg in near space. It is shown that interconnected FEP encapsulated modules of advanced design can withstand all typical ground handling, assembly, storage, and launch conditions, and are well suited for high-power space applications.

Rauschenbach, H. S.↗
NASA NTRS1976

Power spectra of sinusoidal amplitude-modulated binary signals

Power spectra for binary phase-shift keyed (PSK) and frequency-shift keyed (FSK) signals with combined sinusoidal amplitude modulation by the bit rate clock are presented. Such signal formats have application in 'burst' communication systems wherein reliable bit synchronization is provided with relative receiver simplicity. Effects of the clock amplitude modulation index and phase are considered, and corresponding power spectra are illustrated. Further, effects of the clock parameters on the rate of spectral rolloff are given and compared with those of conventional PSK and FSK spectra.

Gee, T. H.↗
NASA NTRS1975

Solar effects associated with the cosmic ray modulation spectrum

Various indicators of solar activity are examined with reference to the changes observed in the rigidity dependence of cosmic ray modulation between 1969 and 1972. The heliolatitude dependence and the N-S asymmetry of solar activity, as deduced from the distribution of sunspots and sunspot groups, appeared to be related to cosmic ray variations during earlier epochs. The failure of such a relationship to continue during the recovery of cosmic ray intensity is discussed. The heliolatitude dependence of the solar wind velocity, as deduced from IPS observations is also discussed in terms of cosmic ray events and of the long term modulation of cosmic ray intensity.

Mendell, R. B.↗
NASA NTRS1975

The solar cycle variation in the solar wind and the modulation of cosmic rays

Evidence for a solar cycle variation in the interplanetary plasma is presented based on direct observations of the solar wind by the Pioneer and Vela spacecraft. These data indicate that between 1965 and 1971 there were more days associated with high speed streams during solar maximum than during solar minimum. These observations provide the first observational explanation for the solar modulation of cosmic rays. At solar maximum the probability is highest that cosmic rays entering the solar system will encounter high speed streams. As a result, there is more modulation of cosmic rays at solar maximum than at other times.

Intriligator, D. S.↗
NASA NTRS1975

Modulation and diffusion theory of cosmic rays

Papers given on the modulation of galactic cosmic rays by the solar wind at the 14th International Cosmic Ray Conference are reviewed. Some of the topics treated in this review are Pioneer and Helios radial gradient measurement, heliolatitude effects in modulation models, diffusion (scattering) theory - including pitch angle diffusion diagrams - solar flare particle transport theory and cosmic ray fluctuations at neutron monitor energies.

Forman, M. A.↗
NASA NTRS1976

A return to the pre-1971 intensity level and a 5.6-d modulation for Cyg X-1

A 5-day modulation in the 'high-state' X-ray intensity data obtained by the Ariel V all-sky monitor for November 1975-January 1976 is reported. The light curve decrement (the fraction of the total source emission over one 5-day cycle which is deficient at superior conjunction) is 0.019 plus or minus 0.003, compared with 0.029 plus or minus 0.004 for a similar 5.6-day modulation observed before the April 1975 flare. The results are most easily explained by scattering from ionized material between the two stellar components which extends outside the orbital plane.

Holt, S. S.↗