Search NASA⌕ Search

SEARCH · Search NASA

Results for “Partitioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Reduced partitioning of plastic strain for strong and yet ductile precipitate-strengthened alloys

When a material that contains precipitates is deformed, the precipitates and the matrix may strain plastically by different amounts causing stresses to build up at the precipitate-matrix interfaces. If premature failure is to be avoided, it is therefore essential to reduce the difference in the plastic strain between the two phases. Here, we conduct nanoscale digital image correlation to measure a new variable that quantifies this plastic strain difference and show how its value can be used to estimate the associated interfacial stresses, which are found to be approximately three times greater in an Fe-Ni 2 AlTi steel than in the more ductile Ni-based superalloy CMSX-4 ® . It is then demonstrated that decreasing these stresses significantly improves the ability of the Fe-Ni 2 AlTi microstructure to deform under tensile loads without loss in strength.

36 MATERIALS SCIENCE↗

Astatine partitioning between nitric acid and conventional solvents: indication of covalency in ketone complexation of AtO +

Astatine-211 has been produced at Texas A&M University on the K150 cyclotron, with a yield of 890 ± 80 MBq through the 209 Bi(α,2n) 211 At reaction via an 8 h bombardment with a beam current of 4–8 μA and an α-particle beam energy of 28.8 MeV. The target was then dissolved in HNO 3 and the extraction of 211 At was investigated into a variety of organic solvents in 1–3 M HNO 3 . Extraction of 211 At with distribution ratios as high as 11.3 ± 0.6, 12.3 ± 0.8, 42.2 ± 2.2, 69 ± 4, and 95 ± 6 were observed for diisopropyl ether, 1-decanol, 1-octanol, 3-octanone, and methyl isobutyl ketone, respectively, while the distribution ratios for 207 Bi were ≤0.05 in all cases. The extraction of 211 At into both methyl isobutyl ketone and 3-octanone showed a strong, linear dependence on the HNO 3 initial aqueous concentration and better extraction than other solvents. DFT calculations show stronger binding between the carbonyl oxygen of the ketone and the At metal center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A toric varieties approach to geometrical structure of multi partite states

We investigate the geometrical structures of multipartite states based on construction of toric varieties. In particular, we describe pure quantum systems in terms of affine toric varieties and projective embedding of these varieties in complex projective spaces. We show that a quantum system can be corresponds to a toric variety of a fan which is constructed by gluing together affine toric varieties of polytopes. Moreover, we show that the projective toric varieties are the spaces of separable multipartite quantum states. The construction is a generalization of the complex multi-projective Segre variety. Our construction suggests a systematic way of looking at the structures of multipartite quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The role of electron equation of state in heating partition of protons in a collisionless plasma

One of the outstanding questions related to the solar wind is the heating of solar wind plasma. Addressing this question requires a self consistent treatment of the kinetic physics of a collisionless plasma. A hybrid code (with particle ions and fluid electrons) is one of the most convenient computational tools, which allows us to explore self consistent ion kinetics, while saving us computational time as compared to the full particle in cell codes. A common assumption used in hybrid codes is that of isothermal electrons. In this paper, we discuss the role that the equation of state for electrons could potentially play in determining the ion kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comment on “Rethinking first-principles electron transport theories with projection operators: The problems caused by partitioning the basis set” [J. Chem. Phys. 139, 114104 (2013)]

In a recent paper Reuter and Harrison [J. Chem. Phys. 139, 114104 (2013)] question the widely used mean-field electron transport theories, which employ nonorthogonal localized basis sets. They claim these can violate an “implicit decoupling assumption,” leading to wrong results for the current, different from what would be obtained by using an orthogonal basis, and dividing surfaces defined in real-space. We argue that this assumption is not required to be fulfilled to get exact results. We show how the current/transmission calculated by the standard Greens function method is independent of whether or not the chosen basis set is nonorthogonal, and that the current for a given basis set is consistent with divisions in real space. The ambiguity known from charge population analysis for nonorthogonal bases does not carry over to calculations of charge flux.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Response to “Comment on ‘Rethinking first-principles electron transport theories with projection operators: The problems caused by partitioning the basis set’” [J. Chem. Phys. 140, 177103 (2014)]

The thesis of Brandbyge's comment [J. Chem. Phys. 140, 177103 (2014)] is that our operator decoupling condition is immaterial to transport theories, and it appeals to discussions of nonorthogonal basis sets in transport calculations in its arguments. We maintain that the operator condition is to be preferred over the usual matrix conditions and subsequently detail problems in the existing approaches. From this operator perspective, we conclude that nonorthogonal projectors cannot be used and that the projectors must be selected to satisfy the operator decoupling condition. Because these conclusions pertain to operators, the choice of basis set is not germane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extending the applicability of the Tkatchenko-Scheffler dispersion correction via iterative Hirshfeld partitioning

Recently we have demonstrated that the applicability of the Tkatchenko-Scheffler (TS) method for calculating dispersion corrections to density-functional theory can be extended to ionic systems if the Hirshfeld method for estimating effective volumes and charges of atoms in molecules or solids (AIM’s) is replaced by its iterative variant [T. Bučko, S. Lebègue, J. Hafner, and J. Ángyán, J. Chem. Theory Comput. 9, 4293 (2013)]. The standard Hirshfeld method uses neutral atoms as a reference, whereas in the iterative Hirshfeld (HI) scheme the fractionally charged atomic reference states are determined self-consistently. We show that the HI method predicts more realistic AIM charges and that the TS/HI approach leads to polarizabilities and C{sub 6} dispersion coefficients in ionic or partially ionic systems which are, as expected, larger for anions than for cations (in contrast to the conventional TS method). For crystalline materials, the new algorithm predicts polarizabilities per unit cell in better agreement with the values derived from the Clausius-Mosotti equation. The applicability of the TS/HI method has been tested for a wide variety of molecular and solid-state systems. It is demonstrated that for systems dominated by covalent interactions and/or dispersion forces the TS/HI method leads to the same results as the conventional TS approach. The difference between the TS/HI and TS approaches increases with increasing ionicity. A detailed comparison is presented for isoelectronic series of octet compounds, layered crystals, complex intermetallic compounds, and hydrides, and for crystals built of molecules or containing molecular anions. It is demonstrated that only the TS/HI method leads to accurate results for systems where both electrostatic and dispersion interactions are important, as illustrated for Li-intercalated graphite and for molecular adsorption on the surfaces in ionic solids and in the cavities of zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discord as a quantum resource for bi-partite communication

Coherent interactions that generate negligible entanglement can still exhibit unique quantum behaviour. This observation has motivated a search beyond entanglement for a complete description of all quantum correlations. Quantum discord is a promising candidate. Here, we experimentally demonstrate that under certain measurement constraints, discord between bipartite systems can be consumed to encode information that can only be accessed by coherent quantum interactions. The inability to access this information by any other means allows us to use discord to directly quantify this ‘quantum advantage’.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Partitioning and structural role of Mn and Fe ions in ionic sulfophosphate glasses

Ionic sulfophosphate liquids of the type ZnO-Na{sub 2}O-Na{sub 2}SO{sub 4}-P{sub 2}O{sub 5} exhibit surprising glass forming ability, even at slow or moderate cooling rate. As a concept, they also provide high solubility of transition metal ions which could act as cross-linking sites between the sulfate and phosphate entities. It is therefore investigated how the replacement of ZnO by MnO and/or FeO affects the glass structure and the glass properties. Increasing manganese levels are found to result in a monotonic increase of the transition temperature T{sub g} and most of the mechanical properties. This trend is attributed to the change of metal-ion coordination from four-fold around Zn{sup 2+} to six-fold around Mn{sup 2+} ions. The higher coordination facilitates cross-linking of the ionic structural entities and subsequently increases T{sub g}. Raman and infrared spectroscopy show that the structure of these glasses involves only SO{sub 4}{sup 2−} and PO{sub 4}{sup 3−} monomers as well as P{sub 2}O{sub 7}{sup 4-} dimers. Replacement of ZnO by MnO is found to favour PO{sub 4}{sup 3−} over P{sub 2}O{sub 7}{sup 4-} species, a trend which is enhanced by co-doping with FeO. Both transition metal ions show, like Zn{sup 2+}, a preference to selectively coordinate to phosphate anionic species, as opposed to sodium ions which coordinate mainly to sulfate anions. EPR spectroscopy finally shows that divalent Mn{sup 2+} ions are present primarily in MnO{sub 6}-clusters, which, in the studied sulfophosphate glasses, convert upon increasing MnO content from corner-sharing to edge-sharing entities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A unified model to determine the energy partitioning between target and plasma in nanosecond laser ablation of silicon

In semiconductor industry, pulsed nanosecond lasers are widely applied for the separation of silicon wafers. Here, the high intensities employed activate a cascade of complex multi-physical and multi-phase mechanisms, which finally result in the formation of a laser induced plasma, shielding the target from the incoming laser beam. Such induced plasma plume, by preventing the laser to effectively reach the target, reduces the overall efficiency and controllability of the ablation process. Modelling can be a useful tool in the optimization of industrial laser applications, allowing a deeper understanding of the way the laser energy distributes between target and induced plasma. Nevertheless, the highly multi-physical character of laser ablation poses serious challenges on the implementation of the various mechanisms underlying the process within a common modelling framework. A novel strategy is here proposed in order to simulate in a simplified, yet physically consistent way, a typical industrial application as laser ablation of silicon wafers. Reasonable agreement with experimental findings is obtained. Three fundamental mechanisms have been identified as the main factors influencing the accuracy of the numerical predictions: the transition from evaporative to volumetric mass removal occurring at critical temperature, the collisional and radiative processes underlying the initial plasma formation stage and the increased impact of the liquid ejection mechanism when a sub-millimeter laser footprint is used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle heating and energy partition in low- β guide field reconnection with kinetic Riemann simulations

Kinetic Riemann simulations have been completed to investigate particle heating during guide field reconnection in the low-β environment of the inner heliosphere and the solar corona. The reconnection exhaust is bounded by two rotational discontinuities (RDs), and two slow shocks (SSs) form within the exhaust as in magnetohydrodynamic (MHD) models. At the RDs, ions are accelerated by the magnetic field tension to drive the reconnection outflow as well as flows in the out-of-plane direction. The out-of-plane flows stream toward the midplane and meet to drive the SSs. The SSs differ greatly from those in the MHD model. The turbulence at the shock fronts and both upstream and downstream is weak, and so the shocks are laminar and produce little dissipation. Downstream of the SSs, the counterstreaming ion beams lead to higher density, which leads to a positive potential between the SSs which acts to confine the downstream electrons to maintain charge neutrality. The potential accelerates electrons from upstream of the SSs to the downstream region and traps a small fraction but only modestly increases the downstream electron temperature above the upstream value. In the low-β limit, the released magnetic energy is split between bulk flow and ion heating with little energy going to electrons. That the model produces neither strong electron heating nor an energetic electron component implicates that other mechanisms, such as multiple x-line reconnection, are required to explain energetic electron production in large flares. The model can be tested with the expected data from the Parker Solar Probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development and evaluation of a silver mordenite composite sorbent for the partitioning of xenon from krypton in gas compositions

A new engineered form composite sorbent for the selective separation of xenon from krypton in simulant composition off-gas streams resulting from the reprocessing of used nuclear fuel has been developed and evaluated. A sodium mordenite powder was incorporated into a macroporous polymer binder, formed into spherical beads and successfully converted to a 9 wt.% silver form composite sorbent. The final engineered form sorbent retained the characteristic surface area indicative of sodium mordenite powder. The sorbent was evaluated for xenon adsorption potential with capacities measured as high as 30 millimoles of xenon per kilogram of sorbent achieved at ambient temperature and 460 millimoles of xenon per kilogram sorbent at 220 K. Xenon/krypton selectivity was calculated to be 22.4 with a 1020 µL/L xenon, 150 µL/L krypton in a balance of air feed gas at 220 K. Furthermore, adsorption/desorption thermal cycling effects were evaluated with results indicating sorbent performance was not significantly impacted while undergoing numerous adsorption/desorption thermal cycles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗