Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Yielding Behavior of Bottlebrush and Linear Block Copolymers

Block copolymers can exhibit a pronounced yield stress, but the impact of molecular architecture, chemistry, and self-assembly on macroscopic rheology remains poorly understood. Here, we study the linear-viscoelastic and yield-stress fluid behavior of two architectures—bottlebrush copolymers (with statistical or blocky sequences) and linear diblocks—that self-assemble into body-centered cubic (BCC) spheres and hexagonally close-packed cylinders (HEX). The dynamic properties of these polymers were probed by oscillatory frequency and amplitude sweeps at temperatures well below the order–disorder transition (TODT) to furnish insights into the yielding transition. All BCC-forming polymers have a similar signature of yielding: smaller yield strains (γ yBCC ≈ 0.053 < γ y,HEX ≈ 0.18), sharper solid–liquid transitions, and better reversibility than HEX. Statistical bottlebrushes show the most frequency-independent structural modulus (G 0 ) and no signs of defect relaxation. A simple power-law relationship captures the dependence of the normalized structural modulus (G 0 /RT) on the inter-micelle distance (d) across different architectures and morphologies [G 0 /(RT) = 1.31 × 10 4 (nm 2.6 mol/m 3 ) d –2.6 ]. These studies establish quantitative structure–property relationships that are relevant in contemporary applications, for example, extrusion-based 3D printing.

36 MATERIALS SCIENCE↗

Base-Promoted Ammonia Borane Hydrogen-Release

The strong non-nucleophilic base bis(dimethylamino)naphthalene (Proton Sponge, PS) has been found to promote the rate and extent of H2-release from ammonia borane (AB) either in the solid state or in ionic-liquid and tetraglyme solutions. For example, AB reactions in 1-butyl-3-methylimidazolium chloride (bmimCl) containing 5.3 mol % PS released 2 equiv of H2 in 171 min at 85 °C and only 9 min at 110 °C, whereas comparable reactions without PS required 316 min at 85 °C and 20 min at 110 °C. Ionic-liquid solvents proved more favorable than tetraglyme since they reduced the formation of undesirable products such as borazine. Solid-state and solution 11B NMR studies of PS-promoted reactions in progress support a reaction pathway involving initial AB deprotonation to form the H3BNH2 - anion. This anion can then initiate AB dehydropolymerization to form branched-chain polyaminoborane polymers. Subsequent chain-branching and dehydrogenation reactions lead ultimately to a cross-linked polyborazylene-type product. AB dehydrogenation by lithium and potassium triethylborohydride was found to produce the stabilized Et3BNH2BH3 - anion, with the crystallographically determined structure of the [Et3BNH2BH3]-K+ · 18-crown-6 complex showing that, following AB nitrogen-deprotonation by the triethylborohydride, the Lewis-acidic triethylborane group coordinated at the nitrogen. Model studies of the reactions of [Et3BNH2BH3]-Li+ with AB show evidence of chain-growth, providing additional support for a PS-promoted AB anionic dehydropolymerization H2- release process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanobiocatalysis for protein digestion in proteomic analysis

The process of protein digestion is a critical step for successful protein identification in the bottom-up proteomic analysis. To substitute the present practice of in-solution protein digestion, which is long, tedious, and difficult to automate, a lot of efforts have been dedicated for the development of a rapid, recyclable and automated digestion system. Recent advances of nanobiocatalytic approaches have improved the performance of protein digestion by using various nanomaterials such as nanoporous materials, magnetic nanoparticles, and polymer nanofibers. Especially, the unprecedented success of trypsin stabilization in the form of trypsin-coated nanofibers, showing no activity decrease under repeated uses for one year and retaining good resistance to proteolysis, has demonstrated its great potential to be employed in the development of automated, high-throughput, and on-line digestion systems. This review discusses recent developments of nanobiocatalytic approaches for the improved performance of protein digestion in speed, detection sensitivity, recyclability, and trypsin stability. In addition, we also introduce the protein digestions under unconventional energy inputs for protein denaturation and the development of microfluidic enzyme reactors that can benefit from recent successes of these nanobiocatalytic approaches.

59 BASIC BIOLOGICAL SCIENCES↗

Finite element analysis of multilayer coextrusion.

Multilayer coextrusion has become a popular commercial process for producing complex polymeric products from soda bottles to reflective coatings. A numerical model of a multilayer coextrusion process is developed based on a finite element discretization and two different free-surface methods, an arbitrary-Lagrangian-Eulerian (ALE) moving mesh implementation and an Eulerian level set method, to understand the moving boundary problem associated with the polymer-polymer interface. The goal of this work is to have a numerical capability suitable for optimizing and troubleshooting the coextrusion process, circumventing flow instabilities such as ribbing and barring, and reducing variability in layer thickness. Though these instabilities can be both viscous and elastic in nature, for this work a generalized Newtonian description of the fluid is used. Models of varying degrees of complexity are investigated including stability analysis and direct three-dimensional finite element free surface approaches. The results of this work show how critical modeling can be to reduce build test cycles, improve material choices, and guide mold design.

36 MATERIALS SCIENCE↗

Polydispersity-Driven Block Copolymer Amphiphile Self-Assembly into Prolate-Spheroid Micelles

The aqueous self-assembly behavior of polydisperse poly(ethylene oxide-b-1,4-butadiene-b-ethylene oxide) (OBO) macromolecular triblock amphiphiles is examined to discern the implications of continuous polydispersity in the hydrophobic block on the resulting aqueous micellar morphologies of otherwise monodisperse polymer surfactants. The chain length polydispersity and implicit composition polydispersity of these samples furnishes a distribution of preferred interfacial curvatures, resulting in dilute aqueous block copolymer dispersions exhibiting coexisting spherical and rod-like micelles with vesicles in a single sample with a O weight fraction, w{sub O}, of 0.18. At higher w{sub O} = 0.51-0.68, the peak in the interfacial curvature distribution shifts and we observe the formation of only American football-shaped micelles. We rationalize the formation of these anisotropically shaped aggregates based on the intrinsic distribution of preferred curvatures adopted by the polydisperse copolymer amphiphiles and on the relief of core block chain stretching by chain-length-dependent intramicellar segregation.

36 MATERIALS SCIENCE↗

Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends

Abstract The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di‐ and tri‐block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small‐angle neutron and x‐ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7–9 nm) than the TBCP (0–4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers.

36 MATERIALS SCIENCE↗

Insights into the physical and chemical properties of a cement-polymer composite developed for geothermal wellbore applications

To isolate injection and production zones from overlying formations and aquifers during geothermal operations, cement is placed in the annulus between well casing and formations. Wellbore cement can fracture due to chemical and physical stress. A polymer-cement (composite) with self-healing properties, stable at high temperatures, was recently developed by our group. Here we present data on the elemental distribution, mineral composition, internal microstructure, and tensile elasticity of this composite and how it compares to cement without polymer (control cement). Entrapped air porosity was similar between control cement (0.44% by volume) and composite (0.22% by volume). Total voids increased with polymer content in the cement (10% and 25% composite), and polymer was found to fill most of these voids. Polymer appears to act as a (cement hydration) retarder increasing the amount of unhydrated silicate minerals in the matrix. Tensile elasticity was improved for composites as compared to control cement, suggesting that the composite materials perform better under mechanical stress. Density-functional calculations reproduce the drop in Young’s modulus by about 60% observed experimentally when polymer is added to the cement. In addition, calculations indicate that the bonding interactions between the cement and polymer remain stable over the range of strain studied.

Rod, Kenton A. (ORCID:0000000318189094)↗

A Silica-Aerogel-Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

High-energy all-solid-state lithium (Li) batteries have great potential as next-generation energy-storage devices. Among all choices of electrolytes, polymer-based systems have attracted widespread attention due to their low density, low cost, and excellent processability. However, they are generally mechanically too weak to effectively suppress Li dendrites and have lower ionic conductivity for reasonable kinetics at ambient temperature. Here, an ultrastrong reinforced composite polymer electrolyte (CPE) is successfully designed and fabricated by introducing a stiff mesoporous SiO 2 aerogel as the backbone for a polymer-based electrolyte. The interconnected SiO 2 aerogel not only performs as a strong backbone strengthening the whole composite, but also offers large and continuous surfaces for strong anion adsorption, which produces a highly conductive pathway across the composite. As a consequence, a high modulus of ≈0.43 GPa and high ionic conductivity of ≈0.6 mS cm -1 at 30°C are simultaneously achieved. Furthermore, LiFePO 4 –Li full cells with good cyclability and rate capability at ambient temperature are obtained. Full cells with cathode capacity up to 2.1 mAh cm -2 are also demonstrated. The aerogel-reinforced CPE represents a new design principle for solid-state electrolytes and offers opportunities for future all-solid-state Li batteries.

25 ENERGY STORAGE↗

Asymmetric Miktoarm Star Polymers as Polyester Thermoplastic Elastomers

A library of polyester-based A(BA') n asymmetric miktoarm star polymers was synthesized with A, A' = poly(l-lactide) (PLLA) as the semicrystalline hard blocks and B = poly(4-methylcaprolactone) (PMCL) as the soft segment using a grafting-through platform known as μSTAR. The synthetic versatility of μSTAR enabled a systematic investigation of architectural design parameters, in particular the number of BA' arms (n), while holding the A, A', and B block lengths constant. The value of n has a pronounced impact on the mechanical properties of these high-molecular-weight miktoarm materials. Tensile toughness increases with n, an effect likely related to bridging, as the modulus drops because the hard-block volume fraction decreases. Furthermore, these insights expand our understanding of architecture effects in sustainable thermoplastic elastomers.

36 MATERIALS SCIENCE↗

Multiscale simulation of polymer nanocomposites

Existing methods for a multiscale simulation of polymer nanocomposites, which are presently thought to be among the most promising materials for applications in various realms of science and technologies, are considered. Factors that affect the structure and properties of polymer nanocomposites are analyzed. These factors include the properties of nanoobjects used as fillers, special features of the interaction between a nanofiller and a host material, and the uniformity of the nanofiller distribution over the polymer volume. It is shown that specific simulation methods are required for properly taking into account each such factor, and an optimum scheme is chosen for a multiscale simulation of polymer nanocomposites. Some results of the calculations performed on the basis of the approach described in this article are presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-cost and durable catalyst support for fuel cells: graphite submicronparticles

Low-cost graphite submicronparticles (GSP) are employed as a possible catalyst support for polymer electrolyte membrane (PEM) fuel cells. Platinum nanoparticles are deposited on Vulcan XC-72 carbon black (XC-72), carbon nanotubes (CNT), and GSP via ethylene glycol (EG) reduction method. The morphologies and the crystallinity of Pt/XC-72, Pt/CNT, and Pt/GSP are characterized with X-ray diffraction and transmission electron microscope, which shows that Pt nanoparticles (~ 3.5 nm) are uniformly dispersed on GSP support. Pt/GSP exhibits the highest activity towards oxygen reduction reactions. The durability study indicates that Pt/GSP is 2 ~ 3 times durable than Pt/CNT and Pt/XC-72. The enhanced durability of Pt/GSP catalyst is attributed to the higher corrosion resistance of graphite submicronparticles, which results from higher graphitization degree of GSP support. Considering its low production cost, graphite submicronparticles are promising electrocatalyst support for fuel cells.

carbon nanotubes↗

Poly(cyclosilane) Postpolymerization Hydrosilylation

Postpolymerization functionalization is a key strategy in the diversification of polymeric materials for the conferral of tailored properties. Poly(cyclosilane)s are structurally complex polymers with an all-silicon backbone, featuring a periodic array of hydrido (Si–H) side chains that are potentially suitable for postpolymerization functionalization via hydrosilylation. At the same time, classical methods for hydrosilylation employing Pt- or Pd-based catalysts can result in Si–Si bond scission. In this work, we demonstrate borane-catalyzed hydrosilylation reactions between α-olefins and small molecules or three distinct poly(cyclosilane) architectures. We investigate chemoselectivity for end group versus internal Si–H groups and find that 29 Si cross-polarization magic angle spinning can provide insight on site-selectivity in the functionalization of a complex poly(cyclosilane). Furthermore, we show that postpolymerization hydrosilylation, converting oxidatively sensitive Si–H groups to Si–alkyl chains, modulates solubility and physical characteristics, optical properties, pyrolytic reactivity, and air sensitivity.

36 MATERIALS SCIENCE↗

Spontaneous wrinkling in azlactone-based functional polymer thin films in 2D and 3D geometries for guided nanopatterning

We report a simple, one step process for developing wrinkling patterns in azlactone-based polymer thin films and brushes in 2D and 3D surfaces. The polymer used in this work wrinkles spontaneously upon deposition and solidification on a substrate without applying any external strain to the substrate, with the mode of deposition defining the direction of the wrinkles. Wrinkle formation is shown to occur on a variety of substrates over large areas. We also find that a very thin brush-like layer of an azlactone-containing block copolymer also exhibits wrinkled topology. Given the spontaneity and versatility of wrinkle formation, we further demonstrate two proofs-of-concept, i) that these periodic wrinkled structures are not limited to planar surfaces, but are also developed in complex geometries including tubes, cones and other 3D structures; and ii) that this one-step wrinkling process can be used to guide the deposition of metal nanoparticles and quantum dots, creating a periodic, nanopatterned film.

36 MATERIALS SCIENCE↗

Considerations for Contractile Electroactive Materials and Actuators

Ras Labs produces contractile electroactive polymer (EAP) based materials and actuators that bend, swell, ripple, and contract (new development) with low electric input. In addition, Ras Labs produces EAP materials that quickly contract and expand, repeatedly, by reversing the polarity of the electric input, which can be cycled. This phenomenon was explored using molecular modeling, followed by experimentation. Applied voltage step functions were also investigated. High voltage steps followed by low voltage steps produced a larger contraction followed by a smaller contraction. Actuator control by simply adjusting the electric input is extremely useful for biomimetic applications. Muscles are able to partially contract. If muscles could only completely contract, nobody could hold an egg, for example, without breaking it. A combination of high and low voltage step functions could produce gross motor function and fine manipulation within the same actuator unit. Plasma treated electrodes with various geometries were investigated as a means of providing for more durable actuation.

60 APPLIED LIFE SCIENCES↗

Effect of PBX prill size on the compressive properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size affects the compressive mechanical properties.

36 MATERIALS SCIENCE↗

Variable-Temperature Scattering and Spectroscopy Characterizations for Temperature-Dependent Solution Assembly of PffBT4T-Based Conjugated Polymers

The solution structure of conjugated polymers (CPs) from which the films are cast is critical for tailoring the thin-film morphology thus device performance. Here, we used multimodal variable-temperature scattering and spectroscopy tools to fully quantify the solution assembly of poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3'''-dialkyl-2,2';5',2'';5'',2'''-quaterthiophen-5,5'''-diyl)] (PffBT4T) polymers with varying side-chain lengths at different assembly temperatures. The conformational and aggregation behaviors for PffBT4T-based CPs were found to be very sensitive to both temperature and side chain length using ultraviolet–visible (UV–vis) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). We found that with slightly increasing side chain length from 2-octyldodecyl (C8C12) to 2-nonyltridecyl (C9C13), PffBT4T-based CPs show a significant decrease in aggregation-to-dissolved chain transition temperature (10 °C), degree of aggregation, enthalpy change of aggregation, and size of the aggregates in solution. At room temperature, PffBT4T polymer strongly aggregated to form fabric structure with the film thickness of a few nanometers in thickness and hundreds of nanometers in length, as probed by atomic force microscopy (AFM), transmission electronic microscopy (TEM), and dynamic light scattering (DLS). At the elevated temperature above the aggregation-to-dissolved chain transition temperature, PffBT4T is fully dissolved and adopts a semiflexible coil conformation with the persistence length of 3.1 nm for PffBT4T-C8C12 and a slightly increased persistence length of 3.4 nm for PffBT4T-C9C13, according to temperature-dependent SANS measurements. Longer side chains of PffBT4T-C9C13 also lead to less aggregation enthalpy gain compared with PffBT4T-C8C12. This work provides a solution structure manipulating strategy of CPs and thus will inspire the molecular design and processing protocols of CPs toward higher performance electronic devices.

36 MATERIALS SCIENCE↗

Characterization of the degradation of gamma-irradiated elastomers using Raman spectroscopy

This report presents key findings from Raman spectroscopic analysis of gamma-irradiated rubber samples extracted from a laminated lead-damped rubber (LDR) seismic isolation device. The samples were exposed to gamma radiation from a 60Co source in a Foss Therapy Services gamma irradiator, reaching absorbed doses up to 1600 kGy. A distinct threshold near 400 kGy was identified, beyond which significant spectral changes were observed. Two Raman peaks - at approximately 425 cm-1 and 2440 cm-1 - were tracked as a function of dose using Gaussian fitting. The 425 cm-1 peak, attributed to sulfur–sulfur (S–S) bond stretching (resulting from vulcanization of the rubber), exhibited a dose-dependent upshift, indicating radiation-induced crosslinking within the sulfur-based polymer network. Conversely, the 2440 cm-1 peak, likely associated with vibrational modes of additives or impurities, showed a downward shift with increasing dose, suggesting chain scission and degradation of non-rubber constituents. These results provide first-of-a-kind insights into the microstructural evolution of elastomers under high-dose gamma irradiation and establish a preliminary dose threshold for significant degradation. Future work will incorporate multi-modal characterization—including Fourier Transform Infrared (FTIR) spectroscopy, scanning electrom microscopy (SEM) of the rubber surface morphology, thermogravimetric analysis (TGA) to determine changes in thermal stability, and mechanical testing—to correlate molecular-level changes with macroscopic performance of these elastomers as damping media in seismic isolation devices. These findings are expected to provide regulatory guidance and design criteria for qualifying low-damping rubber seismic isolators in advanced nuclear reactor applications.

36 - MATERIALS SCIENCE↗