Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Constraining the Low-Temperature Oxidation Mechanism of n -Hexanol through the Detection and Identification of C 6 Elusive Intermediates

Alcohol-based fuels are currently considered to be viable energy carriers for the transportation sector. Consequently, a comprehensive mechanistic understanding of the low-temperature oxidation of alcohols is essential for application in advanced low-temperature compression engines. Here, in this work, a multidimensional approach involving experimental investigations, kinetic modeling, and theoretical calculations was used to provide new insights into the low-temperature oxidation mechanism of a C 6 alcohol, n -hexanol (CH 3 (CH 2 ) 5 OH), through the detection and identification of elusive C 6 intermediates. The oxidation of n-hexanol was investigated in a jet-stirred reactor under stoichiometric conditions (ϕ = 1.0), an initial fuel concentration of 2%, a residence time of 2 s, a temperature range between 500 and 660 K, and a pressure of 700 Torr. The reactants, intermediates, and final products were detected and identified by means of molecular-beam mass spectrometry coupled with single-photon ionization employing tunable synchrotron-generated vacuum ultraviolet radiation. Chemical kinetic simulations were performed using a previously published kinetic model (Togbé et al., Energy Fuels 2010, 11, 5859−5875) to predict the reactivity of n-hexanol and elucidate the predominant formation pathways of the observed low-temperature species. Experimental photoionization efficiency curves in conjunction with ab initio calculations, enabled the identification of important low-temperature species, such as C 6 unsaturated alcohols, C 6 olefinic hydroperoxides, C 6 cyclic ethers, C 6 diones, and C 6 ketohydroperoxides. The results of this study provide valuable insight into the mechanism of the low-temperature oxidation chemistry of n -hexanol, contributing to the development of kinetic models for the low-temperature oxidation of n-hexanol and other long-chain linear alcohols.

alcohols↗

New generation nuclear fuel structures: dense particles in selectively soluble matrix

We have developed a technology for dispersing sub-millimeter sized fuel particles within a bulk matrix that can be selectively dissolved. This may enable the generation of advanced nuclear fuels with easy separation of actinides and fission products. The large kinetic energy of the fission products results in most of them escaping from the sub-millimeter sized fuel particles and depositing in the matrix during burning of the fuel in the reactor. After the fuel is used and allowed to cool for a period of time, the matrix can be dissolved and the fission products removed for disposal while the fuel particles are collected by filtration for recycle. The success of such an approach would meet a major goal of the GNEP program to provide advanced recycle technology for nuclear energy production. The benefits of such an approach include (1) greatly reduced cost of the actinide/fission product separation process, (2) ease of recycle of the fuel particles, and (3) a radiation barrier to prevent theft or diversion of the recycled fuel particles during the time they are re-fabricated into new fuel. In this study we describe a method to make surrogate nuclear fuels of micrometer scale W (shell)/Mo (core) or HfO2 particles embedded in an MgO matrix that allows easy separation of the fission products and their embedded particles. In brief, the method consists of physically mixing W-Mo or hafnia particles with an MgO precursor. Heating the mixture, in air or argon, without agitation, to a temperature is required for complete decomposition of the precursor. The resulting material was examined using chemical analysis, scanning electron microscopy, X-ray diffraction and micro X-ray computed tomography and found to consist of evenly dispersed particles in an MgO + matrix. We believe this methodology can be extended to actinides and other matrix materials.

36 MATERIALS SCIENCE↗

Detailed biomass fast pyrolysis kinetics integrated to computational fluid dynamic (CFD) and discrete element modeling framework: Predicting product yields at the bench-scale

Fast pyrolysis is an intricate process due to the variability and anisotropy of lignocellulosic biomass and the complicated chemistry and physics during conversion in a bubbling fluidized bed reactor (BFBR). The complexity of biomass fast pyrolysis lends itself well to computational fluid dynamics (CFD) and discrete element (DEM) analysis, which promises to reduce experimental time and its associated cost. This work investigated switchgrass fast pyrolysis simulated by computational fluid dynamics coupled with a discrete element method to track individual reacting biomass particles throughout a bench-scale BFBR reactor. We accounted for the fast pyrolysis chemistry through a comprehensive reaction scheme with secondary cracking reactions. We performed a three-step reduction for secondary cracking reactions to convert the full cracking scheme into a reduced scheme easily incorporated into our model. We assessed the impact of operational conditions on the steady-state yields of liquid bio-oil, non-condensable gases (NCG), at 550 °C over a range of fluidization numbers (2 – 6 Umf), reported as a ratio to the minimum fluidization velocity (Umf). At steady-state, the volatile bio-oil yield had a range of 49.3–50.4 wt%. Levoglucosan was the primary volatile component present with 21 wt% of the bio-oil while water was the second largest with 20 wt%. The reduction of the secondary reaction schemes did not appreciably affect the overall yields of switchgrass pyrolysis compared to the full secondary scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CaBr{sub 2} hydrolysis for HBr production using a direct sparging contactor.

The calcium-bromine cycle being investigated is a novel continuous hybrid cycle for hydrogen production employing both heat and electricity. Calcium bromide (CaBr{sub 2}) hydrolysis generates hydrogen bromide (HBr) which is electrolyzed to produce hydrogen. The CaBr{sub 2} hydrolysis at 1050 K (777 C) is endothermic with the heat of reaction {delta}G{sub T} = 181.5 KJ/mol (43.38 kcal/mol) and the Gibbs free energy change is positive at 99.6 kJ/mol (23.81 kcal/mol). What makes this hydrolysis reaction attractive is both its rate and that well over half the thermodynamic requirements for water-splitting heat of reaction of {delta}G{sub T} = 285.8 KJ/mol (68.32 kcal/mol) are supplied at this stage using heat rather than electricity. Molten-phase calcium bromide reactors may overcome the technical barriers associated with earlier hydrolysis approaches using supported solid-phase calcium bromide studied in the Japanese UT-3 cycle. Before constructing the experiment two design concepts were evaluated using COMSOL{trademark} multi-physics models; (1) the first involved sparging steam into a calcium-bromide melt, while (2) the second considered a 'spray-dryer' contactor spraying molten calcium bromide counter-currently to upward-flowing steam. A recent paper describes this work. These studies indicated that sparging steam into a calcium-bromide melt is more feasible than spraying molten calcium bromide droplets into steam. Hence, an experimental sparging hydrolysis reactor using a mullite tube (ID 70 mm) was constructed capable of holding 0.3-0.5 kg (1.5-2.5 x 10{sup -3} kg mol) CaBr{sub 2} forming a melt with a maximum 0.08 m (8 cm) depth. Sparging steam at a steam rate of 0.02 mol/mol of CaBr{sub 2} per minute (1.2-2.3 x 10{sup -5} kg/s), into this molten bath promptly yielded HBr in a stable operation that converted up to 25% of the calcium bromide. The kinetic constant derived from the experimental data was 2.17 x 10{sup -12} kmol s{sup -1} m{sup -2} MPa{sup -1} for the hydrolysis reaction. The conversion rate is highly dependent on melt depth and the design for steam sparging. This experimental data provides a basis for designing a larger-scale sparging hydrolysis reactor for the calcium bromide thermochemical cycle where the endothermic heat of reaction can be effectively supplied by heat transfer coils embedded in the melt.

08 HYDROGEN↗

Effect of Neutron Irradiation Damage on Fission Product Transport in the SiC Layer of TRISO Fuel Particles (HTR2018)

Abstract – Metallic fission products are found to transport through the SiC layer of the tristructural isotropic (TRISO) fuel particle and various studies has been undertaken to understand the transport behavior. It has been recently discovered that the precipitation of intragranular palladium containing fission products in SiC layer of neutron-irradiated TRISO fuel particles occurs via a novel dual-step nucleation mechanism. Direct observations of Pd silicide imprinting into morphological templates of a-SiC precipitates in neutron irradiated SiC layer of TRISO fuel will be discussed with examples from selected particles from both the Advanced Gas Reactor (AGR)-1 (fabricated laboratory-scale at Oak Ridge National Laboratory) and AGR-2 (fabricated at pilot scale by an industrial vendor) experiments. As neutron irradiation damage structures are expected to accelerate the intragranular diffusion kinetics of fission products, their size, shape, density and distribution patterns across the radial thickness of the SiC layer can be directly correlated with the nature of intragranular transport pathways of fission products. In this work, the distinction of neutron irradiation damage structures as a function of fuel type, burnup level and fabrication histories of TRISO coated particles from the AGR-1 and AGR-2 experiments has been studied. The five particles investigated, three AGR-1 and two AGR-2 particles, represent irradiation histories of four fuel types with burnup levels varying from 12.55 to 17.4 % fissions per initial metal atom.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of GdCl{sub 3} on U Electrochemical Properties in LiCl-KCl-UCl{sub 3}-GdCl{sub 3} Salt

Studies on pyro-processing technology have been stimulated in several countries including the United State, Russia, France, Japan, South Korea, and India. The main purpose of this technology is to treat the irradiated nuclear fuel, reduce volume of the nuclear waste, recycle actinides, and close the fast reactor fuel cycle. Therefore, ongoing researches and developments are expected. In pyro-processing, the most important process is an electro-refiner (ER) where uranium and minor actinides are separated on electrode surface while rare earth fission products are accumulated in LiCl- KCl eutectic salt. Due to the fact that the recovery of the U and actinide (An) materials are conducted via an electrolysis, many researchers have been investigating fundamental properties of U in LiCl- KCl system by using various electrochemical techniques. The resulting datasets are useful for effective system operation and development of safeguards in ER system. However, these values have been measured in pure UCl{sub 3} system in LiCl- KCl salt, which may not be practical to the real ER system owing to the fact that a variety of other fission products including An and lanthanide (Ln) are coexisting in the ER system. Therefore, in this work, gadolinium (Gd) was selected as a surrogate material for An or Ln materials in ER system. This is because that Gd has similar physical characteristics to Ln and An elements such as ionic size and reduction potential. By conducting electrochemical methods including cyclic voltammetry (CV), open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS), effects of Gd coexistence on the electrochemical, thermodynamic, and kinetic properties of U were observed. It is hoped that this study will help us further understanding fundamental effect of the Ln/An effect on LiCl- KCl-UCl{sub 3}, yielding closer to the practical ER unit operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multiscale study of helium diffusion in Ni-Cr alloys: Short-range trapping versus long-range channeling

Ni-Cr alloys are widely employed as structural materials in fast nuclear reactors but are vulnerable to high-temperature helium (He) embrittlement (HTHE) under fast neutron irradiation. A comprehensive understanding of He diffusion in Ni-Cr alloys, which governs the kinetics of HTHE, is therefore essential for developing resilient materials and preventing failure. In this work, we reveal the underlying mechanisms of He diffusion in pure Ni and Ni-Cr alloys by integrating density functional theory (DFT) with atomic kinetic Monte Carlo (AKMC) simulations. Our findings uncover a non-monotonic dependence of He diffusivity on Cr concentration, contradicting the monotonic trends predicted by DFT-parameterized theories. At low Cr concentrations, He diffusion is dominated by short-range trapping, characterized by multiple trapping sites and a distinct mechanism within the first nearest neighbor of Cr, differing from that in pure Ni. At high Cr concentrations, these local traps become interconnected, forming long-range fast diffusion channels that enhance He mobility. The competition between localized trapping and extended channeling results in a diffusivity that first decreases, then increases with rising Cr content. These atomic-scale insights offer critical guidance for the design of radiation-tolerant Ni-based alloys. Moreover, the combined DFT-AKMC methodology and the concept of random walker diffusion through interconnected energy basins present a broadly applicable framework for studying transport phenomena in disordered systems.

36 - MATERIALS SCIENCE↗

VUV Photoionization Cross Sections of HO 2 , H 2 O 2 , and H 2 CO

The absolute vacuum ultraviolet (VUV) photoionization spectra of the hydroperoxyl radical (HO2), hydrogen peroxide (H 2 O 2 ), and formaldehyde (H2CO) have been measured from their first ionization thresholds to 12.008 eV. HO 2 , H 2 O 2 , and H 2 CO were generated from the oxidation of methanol initiated by pulsed-laser-photolysis of Cl 2 in a low-pressure slow flow reactor. Reactants, intermediates, and products were detected by time-resolved multiplexed synchrotron photoionization mass spectrometry. Absolute concentrations were obtained from the time-dependent photoion signals by modeling the kinetics of the methanol oxidation chemistry. Photoionization cross sections were determined at several photon energies relative to the cross section of methanol, which was in turn determined relative to that of propene. These measurements were used to place relative photoionization spectra of HO 2 , H 2 O 2 , and H 2 CO on an absolute scale, resulting in absolute photoionization spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasma flow reactor for steady state monitoring of physical and chemical processes at high temperatures

Here, we present the development of a steady state plasma flow reactor to investigate gas phase physical and chemical processes that occur at high temperature (1000 < T < 5000 K) and atmospheric pressure. The reactor consists of a glass tube that is attached to an inductively coupled argon plasma generator via an adaptor (ring flow injector). We have modeled the system using computational fluid dynamics simulations that are bounded by measured temperatures. In situ line-of-sight optical emission and absorption spectroscopy have been used to determine the structures and concentrations of molecules formed during rapid cooling of reactants after they pass through the plasma. Emission spectroscopy also enables us to determine the temperatures at which these dynamic processes occur. A sample collection probe inserted from the open end of the reactor is used to collect condensed materials and analyze them ex situ using electron microscopy. The preliminary results of two separate investigations involving the condensation of metal oxides and chemical kinetics of high-temperature gas reactions are discussed.

36 MATERIALS SCIENCE↗

High growth rate hydride vapor phase epitaxy at low temperature through use of uncracked hydrides

We demonstrate hydride vapor phase epitaxy (HVPE) of GaAs with unusually high growth rates (RG) at low temperature and atmospheric pressure by employing a hydride-enhanced growth mechanism. Under traditional HVPE growth conditions that involve growth from Asx species, RG exhibits a strong temperature dependence due to slow kinetics at the surface, and growth temperatures >750 degrees C are required to obtain RG > 60 um/h. We demonstrate that when the group V element reaches the surface in a hydride, the kinetic barrier is dramatically reduced and surface kinetics no longer limit RG. In this regime, RG is dependent on mass transport of uncracked AsH3 to the surface. By controlling the AsH3 velocity and temperature profile of the reactor, which both affect the degree of AsH3 decomposition, we demonstrate tuning of RG. We achieve RG above 60 um/h at temperatures as low as 560 degrees C and up to 110 um/h at 650 degrees C. We incorporate high-RG GaAs into solar cell devices to verify that the electronic quality does not deteriorate as RG is increased. The open circuit voltage (VOC), which is a strong function of non-radiative recombination in the bulk material, exhibits negligible variance in a series of devices grown at 650 degrees C with RG = 55-110 um/h. The implications of low temperature growth for the formation of complex heterostructure devices by HVPE are discussed.

14 SOLAR ENERGY↗

Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs

Accident-tolerant fuels (ATFs) are fuels and/or cladding that, in comparison with the standard uranium dioxide Zircaloy system, can tolerate loss of active cooling in the core for a considerably longer time period while maintaining or improving the fuel performance during normal operations. It is important to note that the currently used uranium dioxide Zircaloy fuel system tolerates design basis accidents (and anticipated operational occurrences and normal operation) as prescribed by the US Nuclear Regulatory Commission. Previously, preliminary simulations of the plant response have been performed under a range of accident scenarios using various ATF cladding concepts and fully ceramic microencapsulated fuel. Design basis loss of coolant accidents (LOCAs) and station blackout (SBO) severe accidents were analyzed at Oak Ridge National Laboratory (ORNL) for boiling water reactors (BWRs). Researchers have investigated the effects of thermal conductivity on design basis accidents, investigated silicon carbide (SiC) cladding, as well as the effects of ATF concepts on the late stage accident progression. These preliminary analyses were performed to provide initial insight into the possible improvements that ATF concepts could provide and to identify issues with respect to modeling ATF concepts. More recently, preliminary analyses for a range of ATF concepts have been evaluated internationally for LOCA and severe accident scenarios for the Chinese CPR1000 and the South Korean OPR-1000 pressurized water reactors (PWRs). In addition to these scoping studies, a common methodology and set of performance metrics were developed to compare and support prioritizing ATF concepts. A proposed ATF concept is based on iron-chromium-aluminum alloys (FeCrAl). With respect to enhancing accident tolerance, FeCrAl alloys have substantially slower oxidation kinetics compared to the zirconium alloys typically employed. During a severe accident, FeCrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6, and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solar thermochemical hydrogen production with complex perovskite oxides

One promising method for solar energy storage is Solar Thermochemical Hydrogen (STCH) production. This two-step thermochemical process utilizes nonstoichiometric metal oxides to convert solar energy into hydrogen gas. The oxide first undergoes reduction via exposure to heat generated from concentrated solar power. When subsequently exposed to steam, the reduced oxide splits water molecules through its re-oxidation process, thus producing hydrogen gas. The viability of STCH depends on identifying redox-active materials that have fast redox kinetics, structural stability and low reduction temperatures. Complex perovskite oxides show promise for more efficient hydrogen production at lower reduction temperatures than current materials. In this work, a stagnation flow reactor was used to characterize the water splitting capabilities of BaCe 0.25 Mn 0.75 O 3 (BCM). In the future, the method outlined will be used to characterize structural analogues of BCM, to provide insight into the effect of material composition on water splitting behavior and ultimately guide the synthesis of more efficient STCH materials.

14 SOLAR ENERGY↗

Low cost silicon solar array project: Feasibility of low-cost, high-volume production of silane and pyrolysis of silane to semiconductor-grade silicon

Silicon epitaxy analysis of silane produced in the Process Development Unit operating in a completely integrated mode consuming only hydrogen and metallurgical silicon resulted in film resistivities of up to 120 ohms cm N type. Preliminary kinetic studies of dichlorosilane disproportionation in the liquid phase have shown that 11.59% SiH4 is formed at equilibrium after 12 minutes contact time at 56 C. The fluid-bed reactor was operated continuously for 48 hours with a mixture of one percent silane in helium as the fluidizing gas. A high silane pyrolysis efficiency was obtained without the generation of excessive fines. Gas flow conditions near the base of the reactor were unfavorable for maintaining a bubbling bed with good heat transfer characteristics. Consequently, a porous agglomerate formed in the lower portion of the reactor. Dense coherent plating was obtained on the silicon seed particles which had remained fluidizied throughout the experiment.

Breneman, W. C.↗

Atomistic Studies of Cation Transport in Tetragonal ZrO2 During Zirconium Corrosion

Zirconium alloys are the major fuel cladding materials in current reactors. The water-side corrosion is one of the major degradation mechanisms of these alloys. During corrosion the transport of oxidizing species in zirconium dioxide (ZrO2) determines the corrosion kinetics. Previously it has been argued that the outward diffusion of cation ions is important for forming protective oxides. In this work, the migration of Zr defects in tetragonal ZrO2 is studied with temperature accelerated dynamics and molecular dynamics simulations. The results show that Zr interstitials have anisotropic diffusion and migrate preferentially along the [001] or c direction in tetragonal ZrO2. The compressive stresses can increase the Zr interstitial migration barrier significantly. The migration barriers of some defect clusters can be much lower than those of point defects. The migration of Zr interstitials at some special grain boundaries is much slower than in a bulk oxide. The implications of these atomistic simulation results in the Zr corrosion are discussed.

36 MATERIALS SCIENCE↗

Large-scale atomistic simulations of low-energy helium implantation into tungsten single crystals

Large-scale molecular dynamics simulations of post-implantation helium behavior in plasma-facing tungsten single crystals reveal orientation-dependent depth profiles, surface evolution patterns, and other crystallographic and diffusion-related characteristics of helium behavior in tungsten during the first microsecond. Here, the flux of implanted helium atoms studied, Γ ≈ 4 × 10 25 m -2 s -1 , is about one order of magnitude larger than that expected in ITER, the experimental fusion reactor currently being constructed in France. With simulation times on the order of 1 μs, these results serve to discover the mechanisms involved in surface evolution as well as to serve as benchmarks for coarse-grained simulations such as kinetic Monte Carlo and continuum-scale drift–reaction–diffusion cluster dynamics simulations. The findings of our large-scale simulations are significant due to diminished finite-size effects and the longer times reached (corresponding to higher fluences). Specifically, our findings are drastically different from findings published previously in the literature for (001) surfaces under a helium flux of Γ ~ 10 28 m -2 s -1 , which is typical of smaller size and shorter time atomistic simulations. In particular, this study highlights the atomic-scale materials processes relevant to helium entrapment and transport in metals, which have implications not only for nuclear fusion–relevant processes, but also helium-induced embrittlement in irradiated materials such as hospital equipment and fission reactor materials.

36 MATERIALS SCIENCE↗

Mineral solubility and free energy controls on microbial reaction kinetics: Application to contaminant transport in the subsurface

Recent developments in the theoretical treatment of geomicrobial reaction processes have resulted in the formulation of kinetic models that directly link the rates of microbial respiration and growth to the corresponding thermodynamic driving forces. The overall objective of this project was to verify and calibrate these kinetic models for the microbial reduction of uranium(VI) in geochemical conditions that mimic as much as possible field conditions. The approach combined modeling of bacterial processes using new bioenergetic rate laws, laboratory experiments to determine the bioavailability of uranium during uranium bioreduction, evaluation of microbial growth yield under energy-limited conditions using bioreactor experiments, competition experiments between metabolic processes in environmentally relevant conditions, and model applications at the field scale. The new kinetic descriptions of microbial U(VI) and Fe(III) reduction should replace those currently used in reactive transport models that couple catabolic energy generation and growth of microbial populations to the rates of biogeochemical redox processes. The above work was carried out in collaboration between the groups of Taillefert (batch reactor experiments and reaction modeling) at Georgia Tech and Van Cappellen (retentostat experiments and reactive transport modeling) at University of Waterloo (Canada).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of water addition on the combustion of iso -octane investigated in laminar flames, low-temperature reactors, and an HCCI engine

In this work, the effect of H 2 O injection on the combustion process of iso -octane was investigated with the aim to better understand the suitability of water addition as a potential engine control parameter for homogeneous-charge compression ignition (HCCI) combustion. Several experiments were combined including premixed low-pressure flames, a jet-stirred reactor (JSR) and a plug-flow reactor (PFR), both at atmospheric pressure, and a single-cylinder research engine (SCRE) operated with either iso -octane or RON 98 gasoline. The thermal effect of H 2 O addition was determined in laminar premixed iso -octane/O 2 /Ar flames (equivalence ratio $Φ$=1.4, 40 mbar) with H 2 O mole fractions of 0 to 0.22, where water addition reduced the temperature measured by laser-induced fluorescence (LIF) by up to 110 K. Speciation data were obtained from these flames as well as in the JSR ($Φ$=0.65, 933 mbar) and PFR experiments ($Φ$=0.65, 970 mbar) with and without H 2 O addition in the low- to intermediate temperature regime from 700–1100 K. The chemical analysis in these flame and reactor experiments was performed using molecular-beam mass spectrometry (MBMS) employing either electron ionization (EI) in the PFR and premixed flame or single-photon ionization (PI) by tunable vacuum-ultraviolet radiation in the JSR. The effects on species mole fractions were small which is supported by predictions from chemical-kinetic simulations. Quantitative speciation data of the exhaust gas of the SCRE were obtained by using Fourier-transform infrared (FTIR) spectroscopy. A very similar species pool was detected in the laboratory-scale experiments and for the engine operation. It is thus assumed that these results could assist in guiding both the improvement of fundamental chemical-kinetic as well as HCCI engine control models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of hydrogen preconversion on the homogeneous ignition of fuel-lean H{sub 2}/O{sub 2}/N{sub 2}/CO{sub 2} mixtures over platinum at moderate pressures

The impact of fractional hydrogen preconversion on the subsequent homogeneous ignition characteristics of fuel-lean (equivalence ratio {phi} = 0.30) H{sub 2}/O{sub 2}/N{sub 2}/CO{sub 2} mixtures over platinum was investigated experimentally and numerically at pressures of 1, 5 and 8 bar. Experiments were performed in an optically accessible channel-flow reactor and involved Raman measurements of major species over the catalyst boundary layer and planar laser induced fluorescence (LIF) of the OH radical. Simulations were carried out with a 2-D elliptic code that included detailed hetero-/homogeneous chemistry. The predictions reproduced the LIF-measured onset of homogeneous ignition and the Raman-measured transport-limited catalytic hydrogen consumption. For 0% preconversion and wall temperatures in the range 900 K {<=} T{sub w} {<=} 1100 K, homogeneous ignition was largely suppressed for p {>=} 5 bar due to the combined effects of intrinsic gas-phase hydrogen kinetics and the competition between the catalytic and gas-phase pathways for fuel consumption. A moderate increase of preconversion to 30% restored homogeneous combustion for p {>=} 5 bar, despite the fact that the water formed due to the upstream preconversion inhibited homogeneous ignition. The catalytically-produced water inhibited gas-phase combustion, particularly at higher pressures, and this kinetic inhibition was exacerbated by the diffusional imbalance of hydrogen that led to over-stoichiometric amounts of water in the near-wall hot ignitable regions. Radical adsorption/desorption reactions hindered the onset of homogeneous ignition and this effect was more pronounced at 1 bar. On the other hand, over the post-ignition reactor length, radical adsorption/desorption reactions significantly suppressed gas-phase combustion at 5 and 8 bar while their impact at 1 bar was weaker. By increasing hydrogen preconversion, the attained superadiabatic surface temperatures could be effectively suppressed. An inverse catalytically stabilized thermal combustion (CST) concept has been proposed, with gas-phase ignition achieved in an upstream porous burner via radiative and heat conduction feedback from a follow-up catalytic reactor. This arrangement moderated the superadiabatic surface temperatures and required modest or no preheat of the incoming mixture. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗