Search NASA⌕ Search

SEARCH · Search NASA

Results for “STEP system engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

A Brownian dynamics study on ferrofluid colloidal dispersions using an iterative constraint method to satisfy Maxwell’s equations

Ferrofluids are often favored for their ability to be remotely positioned via external magnetic fields. The behavior of particles in ferromagnetic clusters under uniformly applied magnetic fields has been computationally simulated using the Brownian dynamics, Stokesian dynamics, and Monte Carlo methods. However, few methods have been established that effectively handle the basic principles of magnetic materials, namely, Maxwell’s equations. An iterative constraint method was developed to satisfy Maxwell’s equations when a uniform magnetic field is imposed on ferrofluids in a heterogeneous Brownian dynamics simulation that examines the impact of ferromagnetic clusters in a mesoscale particle collection. This was accomplished by allowing a particulate system in a simple shear flow to advance by a time step under a uniformly applied magnetic field, then adjusting the ferroparticles via an iterative constraint method applied over sub-volume length scales until Maxwell’s equations were satisfied. The resultant ferrofluid model with constraints demonstrates that the magnetoviscosity contribution is not as substantial when compared to homogeneous simulations that assume the material’s magnetism is a direct response to the external magnetic field. This was detected across varying intensities of particle-particle interaction, Brownian motion, and shear flow. Ferroparticle aggregation was still extensively present but less so than typically observed.

42 ENGINEERING↗

Framework Application for Core Edge Transport Simulations (FACETS) Performance Analysis (Final Report)

The goal of the FACETS project (Framework Application for Core-Edge Transport Simulations) was to provide a multiphysics, parallel framework application (FACETS) that will enable whole-device modeling for the U.S. fusion program, to provide the modeling infrastructure needed for ITER, the next step fusion confinement device. Through use of modern computational methods, including component technology and object oriented design, FACETS is able to switch from one model to another for a given aspect of the physics in a flexible manner. This enables use of simplified models for rapid turnaround or high-fidelity models that can take advantage of the largest supercomputer hardware. FACETS does so in a heterogeneous parallel context, where different parts of the application execute in parallel by utilizing task farming, domain decomposition, and/or pipelining as needed and applicable. ParaTools, Inc. was tasked with supporting the performance analysis and tuning of the FACETS components and framework in order to achieve the parallel scaling goals of the project. The TAU Performance System® was used for instrumentation, measurement, archiving, and profile / tracing analysis. ParaTools, Inc. also assisted in FACETS performance engineering efforts. Through the use of the TAU Performance System, ParaTools provided instrumentation, measurement, analysis and archival support for the FACETS project. Performance optimization of key components has yielded significant performance speedups. TAU was integrated into the FACETS build for both the full coupled application and the UEDGE component. The performance database provided archival storage of the performance regression testing data generated by the project, and helped to track improvements in the software development.

97 MATHEMATICS AND COMPUTING↗

Early Impacts of a Human-in-the-Loop Evaluation in a Space Vehicle Mock-up Facility

The development of a new space vehicle, the Orion Crew Exploration Vehicle (CEV), provides Human Factors engineers an excellent opportunity to have an impact early in the design process. This case study highlights a Human-in-the-Loop (HITL) evaluation conducted in a Space Vehicle Mock-Up Facility and will describe the human-centered approach and how the findings are impacting design and operational concepts early in space vehicle design. The focus of this HITL evaluation centered on the activities that astronaut crewmembers would be expected to perform within the functional internal volume of the Crew Module (CM) of the space vehicle. The primary objective was to determine if there are aspects of a baseline vehicle configuration that would limit or prevent the performance of dynamically volume-driving activities (e.g. six crewmembers donning their suits in an evacuation scenario). A second objective was to step through concepts of operations for known systems and evaluate them in integrated scenarios. The functional volume for crewmember activities is closely tied to every aspect of system design (e.g. avionics, safety, stowage, seats, suits, and structural support placement). As this evaluation took place before the Preliminary Design Review of the space vehicle with some designs very early in the development, it was not meant to determine definitely that the crewmembers could complete every activity, but rather to provide inputs that could improve developing designs and concepts of operations definition refinement.

Byrne, Vicky↗

A Physics-Based Work-Energy Formulation for Real-Time Trajectory Guidance of A Lunar Lander

Throughout the years, many researchers have calculated and optimized trajectory solutions for lunar landing systems by employing sophisticated mathematical methods, that include: Hamilton’s Principle of Variation, Pontryagin’s maximum principle, and well known convex-optimization techniques among others. Many of these approaches typically require expensive computational resources to achieve convergence in the solution. In an effort to reduce complexity and the computational load required to obtain real-time guidance commands, a simple physics-based work-energy approach has been formulated. This approach is based on the dissipation of the mechanical energy of the vehicle to its final desired energy state required to achieve a safe landing. The rocket engine(s) employed during landing (among other maneuvers) dissipates mechanical energy by both doing work against the velocity vector of the vehicle (thus defining the trajectory path), and by jettisoning mass. Therefore, by solving the energy dissipation problem at every step of the maneuver, a much simpler formulation that naturally and quickly attains convergence is obtained. This formulation is not limited to approach, landing, and divert maneuvers, but in principle it can be employed during de-orbiting, braking burn, ascent, as well as orbit insertion.

Guidance↗

A Physics-Based Work-Energy Formulation for Real-Time Trajectory Guidance of a Lunar Lander

Throughout the years, many researchers have calculated and optimized trajectory solutions for lunar landing systems by employing sophisticated mathematical methods, that include: Hamilton’s Principle of Variation, Pontryagin’s maximum principle, and well known convex-optimization techniques among others. Many of these approaches typically require expensive computational resources to achieve convergence in the solution. In an effort to reduce complexity and the computational load required to obtain real-time guidance commands, a simple physics-based work-energy approach has been formulated. This approach is based on the dissipation of the mechanical energy of the vehicle to its final desired energy state required to achieve a safe landing. The rocket engine(s) employed during landing (among other maneuvers) dissipates mechanical energy by both doing work against the velocity vector of the vehicle (thus defining the trajectory path), and by jettisoning mass. Therefore, by solving the energy dissipation problem at every step of the maneuver, a much simpler formulation that naturally and quickly attains convergence is obtained. This formulation is not limited to approach, landing, and divert maneuvers, but in principle it can be employed during de-orbiting, braking burn, ascent, as well as orbit insertion.

Guidance↗

Examining Food Risk in the Large using a Complex, Networked System-of-sytems Approach

The food production infrastructure is a highly complex system of systems. Characterizing the risks of intentional contamination in multi-ingredient manufactured foods is extremely challenging because the risks depend on the vulnerabilities of food processing facilities and on the intricacies of the supply-distribution networks that link them. A pure engineering approach to modeling the system is impractical because of the overall system complexity and paucity of data. A methodology is needed to assess food contamination risk 'in the large', based on current, high-level information about manufacturing facilities, corrunodities and markets, that will indicate which food categories are most at risk of intentional contamination and warrant deeper analysis. The approach begins by decomposing the system for producing a multi-ingredient food into instances of two subsystem archetypes: (1) the relevant manufacturing and processing facilities, and (2) the networked corrunodity flows that link them to each other and consumers. Ingredient manufacturing subsystems are modeled as generic systems dynamics models with distributions of key parameters that span the configurations of real facilities. Networks representing the distribution systems are synthesized from general information about food corrunodities. This is done in a series of steps. First, probability networks representing the aggregated flows of food from manufacturers to wholesalers, retailers, other manufacturers, and direct consumers are inferred from high-level approximate information. This is followed by disaggregation of the general flows into flows connecting 'large' and 'small' categories of manufacturers, wholesalers, retailers, and consumers. Optimization methods are then used to determine the most likely network flows consistent with given data. Vulnerability can be assessed for a potential contamination point using a modified CARVER + Shock model. Once the facility and corrunodity flow models are instantiated, a risk consequence analysis can be performed by injecting contaminant at chosen points in the system and propagating the event through the overarching system to arrive at morbidity and mortality figures. A generic chocolate snack cake model, consisting of fluid milk, liquid eggs, and cocoa, is described as an intended proof of concept for multi-ingredient food systems. We aim for an eventual tool that can be used directly by policy makers and planners.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Algae-based sorbents for removal of gallium from semiconductor manufacturing wastewater

Gallium is increasingly used in industry, and particularly as a component of new materials that have entered semiconductor manufacturing. The release of gallium in factory’s wastewater is potentially an environmental issue and a human health concern. Utilization of algae-based sorbents in the treatment of wastewater polluted by heavy metals has been regarded as a potentially efficient and environmentally-friendly technology. Removal of gallium from simulated wastewater using dead freshwater green algae, ( Chlorella sorokiniana ), as a sorbent was studied. Both batch and continuous flow operations were investigated. Mass balance-based process models were developed and validated for both batch and flow systems. These models were found to be valuable for both understanding the process steps as well as for analyzing the experimental data and determining the fundamental kinetics and thermodynamic parameters. Adsorption capacity was found to be 14.1 mg/g at pH of 2.3, increasing to 38.5 mg/g when the pH is raised to 2.8. The effect of pH is attributed to the surface charge interactions between biomass and gallium and indicates that gallium can be acid-washed and desorbed from the biomass. This property allows for capture followed by recovery of gallium from wastewater using algae based biosorbents.

09 BIOMASS FUELS↗

Characterization of laboratory-scale hydraulic fracturing for EGS

To investigate the impact of reservoir stimulation by hydraulic fracturing, a series of advanced lab-scale block tests were conducted with multiple measurement methods to characterize the fracture and to assess the operation and the performance of an enhanced or engineered geothermal system (EGS). The stimulation test samples were 330-mm cubic blocks of Sierra White granite with one injection well and four producers drilled into it. Acoustic emissions generated during the fracture initiation and propagation were monitored with twenty AE sensors mounted on all sides of the block to help characterize the fracture initiation and propagation process. The recorded AE signals were analyzed to obtain the event location and the failure mechanism. The localized AE events shows that due to the low viscosity of the fracturing fluid (water), the fracture propagated rapidly and took only about 1.4 s to reach near the block surface. During the fracturing phase, about 47 percent of the events were determined to be shear/mixed mode failure events, 28 percent tensile failure events, and 25 percent compressional failure events. Just after the simulation, a step-rate (constant flowrate) injection test was carried out to investigate the reservoir injectivity enhancement. During this phase additional compressional failure events were observed and the percentages of tensile failure and shear/mixed mode failure decreased. The dramatic increase of the injection rate with small increments of the injection pressure demonstrates the nonlinear response of the fracture to effective normal stress variation with much higher fracture opening increase during the low effective normal stress interval. Hydraulic fracturing tests under different stress levels show that more AE hits/events are recorded when the rock block is under higher applied stress. The reconstructed 3D fracture geometry shows good agreement with the AE monitoring results. After fracturing, a tracer test was carried out and the fracture aperture was estimated to be around 139 μm. The tracer recovery curve shows two linear portions of the tracer tail on a semi-log plot similar to that observed in some field data and predicted by numerical modeling. Laser scanning of the fracture surfaces indicates that the induced fracture has a rough surface with a joint roughness coefficient (JRC) of 12.98 and tortuosity of 1.10, both of which are slightly larger than that from the Brazilian test fracture on the same rock. The thin section and SEM observations show that the fracture follows the weak boundaries between the Quartz and Albite grains or the weak beddings in the grains.

58 GEOSCIENCES↗

Understanding and predicting soot generation in turbulent non-premixed jet flames.

This report documents the results of a project funded by DoD's Strategic Environmental Research and Development Program (SERDP) on the science behind development of predictive models for soot emission from gas turbine engines. Measurements of soot formation were performed in laminar flat premixed flames and turbulent non-premixed jet flames at 1 atm pressure and in turbulent liquid spray flames under representative conditions for takeoff in a gas turbine engine. The laminar flames and open jet flames used both ethylene and a prevaporized JP-8 surrogate fuel composed of n-dodecane and m-xylene. The pressurized turbulent jet flame measurements used the JP-8 surrogate fuel and compared its combustion and sooting characteristics to a world-average JP-8 fuel sample. The pressurized jet flame measurements demonstrated that the surrogate was representative of JP-8, with a somewhat higher tendency to soot formation. The premixed flame measurements revealed that flame temperature has a strong impact on the rate of soot nucleation and particle coagulation, but little sensitivity in the overall trends was found with different fuels. An extensive array of non-intrusive optical and laser-based measurements was performed in turbulent non-premixed jet flames established on specially designed piloted burners. Soot concentration data was collected throughout the flames, together with instantaneous images showing the relationship between soot and the OH radical and soot and PAH. A detailed chemical kinetic mechanism for ethylene combustion, including fuel-rich chemistry and benzene formation steps, was compiled, validated, and reduced. The reduced ethylene mechanism was incorporated into a high-fidelity LES code, together with a moment-based soot model and models for thermal radiation, to evaluate the ability of the chemistry and soot models to predict soot formation in the jet diffusion flame. The LES results highlight the importance of including an optically-thick radiation model to accurately predict gas temperatures and thus soot formation rates. When including such a radiation model, the LES model predicts mean soot concentrations within 30% in the ethylene jet flame.

33 ADVANCED PROPULSION SYSTEMS↗

Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced Data Science Model for Detecting Intelligent Malware

This study focused on developing a robust artificial intelligence (AI) model capable of detecting and characterizing advanced malware in Internet of Things (IoT) devices using network data. By analyzing network traffic with various machine learning (ML) models, our AI model can identify and characterize malicious activities to significantly improve malware detection accuracy and reliability as compared to traditional methods. The developed AI/ML model was trained using network data from IoT devices, leveraging classifiers such as Random Forest, Gradient Boosting, AdaBoost, and others to optimize detection performance. This project demonstrates a scalable framework for real-time malware detection and characterization in IoT networks, capable of identifying infected devices and facilitating the necessary steps to remove or isolate them, thereby preventing further infections. Although digital twin (DT) integration is not yet implemented in the current model, it represents a promising future enhancement. By creating a virtual replica of physical IoT devices, DT technology would allow for real-time monitoring and analysis without directly accessing operational technology, thus reducing the risk of compromising or reducing the performance of actual devices. This integration would further enhance the security of IoT ecosystems, combining AI technology to better flag and detect indications of malware-infected devices within a nuclear system environment.

42 ENGINEERING↗

Aerogel Projects Ongoing in MSFC's Engineering Directorate

When we speak of an aerogel material, we are referring more to process and structure am to a specific substance. Aerogel, considered the lightest solid material, has been made from silica for seventy years. Resorcinol-formaldehyde, organic aerogels have been developed more recently. However, aerogel can be made from almost any type of substance, even lead. Because an aerogel is mostly air (about 99 %), the solid substance used will affect the weight very little. The term "aerogel" connotes the sol-gel process used to manufacture the material. The aerogel begins as a liquid "sol," becomes a solid "alcogel," and is then dried to become an "aerogel." The final product has a unique structure, useful for exploitation. It is an "open pore" system with nano-sized particles and pores, has very high surface area, and is highly interconnected. Besides low weight, aerogels have ultimate (lowest) values in other properties: thermal conductivity, refractive index, sound speed, and dielectric constant. Aerogels were first prepared in 1931 by Steven Kistler, who used a supercritical drying step to replace the liquid in a gel with air, preserving the structure (1). Kistler's procedure involved a water-to-alcohol exchange step; in the 1970's, this step was eliminated when a French investigator introduced the use of tetramethylorthosilicate. Still, alcohol drying involved dangerously high temperatures and pressures. In the 1980's, the Microstructured Materials Group at Berkeley Laboratory found that the alcohol in the gel could be replaced with liquid carbon dioxide before supercritical drying, which greatly improved safety (2). 'Me most recent major contribution has been that of Deshpande, Smith and Brinker in New Mexico, who are working to eliminate the supercritical drying step (3). When aerogels were first being developed, they were evaporatively dried. However, the wet gel, when dried, underwent severe shrinkage and cracking; this product was termed "xerogel." When the autoclave drying step was introduced, the final product was without cracks and showed only minimal shrinkage; this product was termed "aerogel." In the 1990's, Deshpande, Smith and Brinker developed an evaporative drying procedure in which the wet gel is chemically "capped" so that the material, which undergoes shrinkage, springs back to its original size when evaporatively dried. This new type of xerogel, while uncracked and almost the same size as the wet gel, differs from the autoclave-dried product in that it is less porous (approximately 70%, as compared to 99% for aerogels).

Shular, David A.↗

Engineering Second Sphere Interactions in a Host–Guest Multicomponent Catalyst System for the Hydrogenation of Carbon Dioxide to Methanol

Many enzymes utilize interactions extending beyond the primary coordination sphere to enhance catalyst activity and/or selectivity. Such interactions could improve the efficacy of synthetic catalyst systems, but the supramolecular assemblies employed by biology to incorporate second sphere interactions are challenging to replicate in synthetic catalysts. Herein, a strategy is reported for efficiently manipulating outer sphere influence on catalyst reactivity by modulating host–guest interactions between a noncovalently encapsulated transitionmetal-based catalyst guest and a metal–organic framework (MOF) host. This composite consists of a ruthenium PNP pincer complex encapsulated in the MOF UiO-66 that is used in tandem with the zirconium oxide nodes of UiO-66 and a ruthenium PNN pincer complex to hydrogenate carbon dioxide to methanol. Due to the method used to incorporate the complexes in UiO-66, structure–activity relationships could be efficiently determined using a variety of functionalized UiO-66-X hosts. These investigations uncovered the beneficial effects of the ammonium functional group (i.e., UiO-66-NH 3 + ). Mechanistic experiments revealed that the ammonium functionality improved efficiency in the hydrogenation of carbon dioxide to formic acid, the first step in the cascade. Isotope effects and structure–activity relationships suggested that the primary role of the ammonium functionality is to serve as a general Brønsted acid. Importantly, the cooperative influence from the host was effective only with the functional group in close proximity to the encapsulated catalyst. Here, reactions carried out in the presence of molecular sieves to remove water highlighted the beneficial effects of the ammonium functional group in UiO-66-NH 3 + and resulted in a 4-fold increase in activity. As a result of the modular nature of the catalyst system, the highest reported turnover number (TON) (19 000) and turnover frequency (TOF) (9100 h –1 ) for the hydrogenation of carbon dioxide to methanol are obtained. Moreover, the reaction was readily recyclable, leading to a cumulative TON of 100 000 after 10 reaction cycles.

08 HYDROGEN↗

How ExMC Communicates a System Model to Non-Modelers

NASA’s Human Research Program (HRP) Exploration Medical Capability (ExMC) Element adopted Systems Engineering (SE) principles and Model Based Systems Engineering (MBSE) tools to capture the system functions, system architecture, requirements, interfaces, and clinical capabilities for a future exploration medical system. There are many different stakeholders who may use the information in the model: systems engineers, clinicians (physicians, nurses, and pharmacists), scientists, and mission planners. Many of these stakeholders have neither access to MBSE modeling tools nor experience with SE modeling techniques. The challenge faced by ExMC SE team was how to present the content in the model to non-modelers in a way they would understand the content with limited training in MBSE and without using the modeling tool. ExMC SE team created a Hypertext Markup Language (HTML) report that shows key model content and is accessible to anyone with a browser. When creating the HTML report, the ExMC SE received stakeholder feedback on what content they wanted and how to display this content. Incorporating this feedback, the report arranges the content in a way that directs readers through the SE process taken to derive the requirements and helps them to understand the fundamental steps in an SE approach. The report includes links to source information (e.g., NASA documentation that describes levels of care) and other SE products (e.g., Concept of Operations). These links were provided to aid in the understanding of how the team created this content through a methodical SE approach. This presentation outlines the process used to develop the model, the data chosen to share with stakeholders, many of the model elements used in the report, the review process stakeholders followed, the comments received from the stakeholders, and the lessons ExMC learned through producing this HTML report.

J. Cohen↗

Single-Step Shear-Based Deformation Processing of Electrical Conductor Wires

Commercial electrical conductor wires are currently produced from aluminum alloys by multi-step deformation processing involving rolling and drawing. These processes typically require 10 to 20 steps of deformation, since the plastic strain or reduction that can be imposed in a single step is limited by material workability and process mechanics. Here, we demonstrate a fundamentally different, single-step approach to produce flat wire aluminum products using machining-based deformation that also ensures adequate material workability in the formed product. Two process routes are proposed: (1) chip formation by free-machining (FM), with a post-machining, light drawing reduction (<20%) to achieve desired finish and (2) constrained chip formation by large strain extrusion machining (LSEM). Using commercially pure aluminum conductor alloys (Al 1100 and EC1350) as representative material systems, we demonstrate key features of the machining-based processing, including (a) single-step processing to achieve flat wire geometries, (b) surface finish (Ra = 0.2 to 1.0 μm) comparable to that of commercial wire products made by drawing/rolling, (c) deformation control independent of wire size, and (d) hardness increases of 50–150% over that of annealed wires, while retaining high electrical conductivity (>56% IACS). Here, the wire microstructure, which can also be varied via the large-strain deformation parameters, is correlated with mechanical and electrical properties. Implications for commercial manufacture of flat wire products are discussed.

36 MATERIALS SCIENCE↗

Fuel Stratification Effects on Gasoline Compression Ignition with a Regular-Grade Gasoline on a Single-Cylinder Medium-Duty Diesel Engine at Low Load

Prior research studies have investigated a wide variety of gasoline compression ignition (GCI) injection strategies and the resulting fuel stratification levels to maintain control over the combustion phasing, duration, and heat release rate. Previous GCI research at the US Department of Energy’s Oak Ridge National Laboratory has shown that for a combustion mode with a low degree of fuel stratification, called “partial fuel stratification” (PFS), gasoline range fuels with anti-knock index values in the range of regular-grade gasoline (~87 anti-knock index or higher) provides very little controllability over the timing of combustion without significant boost pressures. On the contrary, heavy fuel stratification (HFS) provides control over combustion phasing but has challenges achieving low temperature combustion operation, which has the benefits of low NOX and soot emissions, because of the air handling burdens associated with the required high exhaust gas recirculation rates. Furthermore, this work investigates HFS and PFS combustion, efficiency, and emissions performance on a single-cylinder, medium-duty engine with a regular-grade gasoline (91 research octane number) at 1,200 rpm, 4.3 bar, and 3.0 nominal gross indicated mean effective pressure operating points with boost levels similar to those in a medium-duty diesel application. Authority of combustion phasing with main injection timing sweeps for HFS and second injection timing sweeps and fuel split sweeps for PFS are shown. In addition, this work is discussed in the context of previous findings with a light-duty diesel platform, and next steps and future direction for this work are presented.

33 ADVANCED PROPULSION SYSTEMS↗

Compact liquid nitrogen pump

The invention provides a cryogenic liquid pump system, having a first end with at least an insulating lid and motor; a second end, wherein the second end is a pump, said pump comprising an impeller; and a gas release plate upstream of the impeller; and a shaft disposed between the first end and the second end, wherein the motor imparts mechanical energy to the pump through the shaft. Also provided is a method for preventing cavitation of a cryogenic liquid in a cryogenic pump, the method having the steps of constantly maintaining pressure on the liquid in the pump and evacuating gas bubbles that form within the pump.

42 ENGINEERING↗

Understanding the stability of a plastic‐degrading Rieske iron oxidoreductase system

Abstract Rieske oxygenases (ROs) are a diverse metalloenzyme class with growing potential in bioconversion and synthetic applications. We postulated that ROs are nonetheless underutilized because they are unstable. Terephthalate dioxygenase (TPA DO PDB ID 7Q05 ) is a structurally characterized heterohexameric α 3 β 3 RO that, with its cognate reductase (TPA RED ), catalyzes the first intracellular step of bacterial polyethylene terephthalate plastic bioconversion. Here, we showed that the heterologously expressed TPA DO /TPA RED system exhibits only ~300 total turnovers at its optimal pH and temperature. We investigated the thermal stability of the system and the unfolding pathway of TPA DO through a combination of biochemical and biophysical approaches. The system's activity is thermally limited by a melting temperature ( T m ) of 39.9°C for the monomeric TPA RED , while the independent T m of TPA DO is 50.8°C. Differential scanning calorimetry revealed a two‐step thermal decomposition pathway for TPA DO with T m values of 47.6 and 58.0°C (Δ H = 210 and 509 kcal mol −1 , respectively) for each step. Temperature‐dependent small‐angle x‐ray scattering and dynamic light scattering both detected heat‐induced dissociation of TPA DO subunits at 53.8°C, followed by higher‐temperature loss of tertiary structure that coincided with protein aggregation. The computed enthalpies of dissociation for the monomer interfaces were most congruent with a decomposition pathway initiated by β‐β interface dissociation, a pattern predicted to be widespread in ROs. As a strategy for enhancing TPA DO stability, we propose prioritizing the re‐engineering of the β subunit interfaces, with subsequent targeted improvements of the subunits.

59 BASIC BIOLOGICAL SCIENCES↗