Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Size-dependent structural phase transitions and their correlation with photoluminescence and optical absorption behavior of annealed Zn0.45Cd0.55S quantum dots

Highlights: • Thermal Induced Structural Phase transition in nanostructured Zn{sub 0.45}Cd{sub 0.55}S. • Low temperature structural phase transition from cubic to hexagonal structure. • Thermal annealing effect on FTIR and Raman Spectra. • Thermal annealing effect on optical absorption of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles. • Excitation-wavelength dependent photoluminescence emission spectra. - Abstract: In this paper, we investigate the effect of thermally induced structural phase transitions on the photoluminescence (PL) and optical absorption behaviour of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles (NPs). Analysis of X-ray diffraction (XRD) patterns and high-resolution electron microscope (HRTEM) images reveal that the as-synthesized sample possesses zinc-blende-type cubic structure. In addition, at annealing temperature (T{sub a}) 400 °C, the cubic structure transforms completely into the wurtzite-type hexagonal structure. Furthermore, the second phase transition of the as-synthesized sample has observed at 700 °C, where the cubic structure has transformed into mixed polycrystalline phases of hexagonal ZnO, cubic CdO, monoclinic CdSO{sub 3}, and orthorhombic ZnSO{sub 4} structures. These new phases have also confirmed from the analysis of Raman and FTIR spectra. Analysis of UV–visible optical absorption spectra demonstrates that Increasing T{sub a} results in the decrease of optical band gap due the improvement in crystallinity accompanied by the increase in the particle size. The PL emission bands at an excitation energy of 3.818 eV exhibit redshift and a decrease in the intensity with increasing T{sub a} up to 500 °C. Meanwhile, further increase in T{sub a} up to 700 °C results in the enhancement of green emission intensity. On the other hand, PL emission spectra at 3.354 eV and T{sub a} 700 °C, reveal a dramatic increase in the emission intensity nearly by one-order of magnitude with respect to its value of the as-synthesized sample. This behaviour is ascribed to the incorporation of oxygen-related defects via thermal annealing in air, which act as additive radiative centers. Also, we have interpreted the observed spectral blue shift of PL emission spectrum with increasing excitation energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Local Molecular Field Theory for Coulomb Interactions in Aqueous Solutions

Coulomb interactions play a crucial role in a wide array of processes in aqueous solutions but present conceptual and computational challenges to both theory and simulations. We review recent developments in an approach addressing these challenges–local molecular field (LMF) theory. LMF theory exploits an exact and physically suggestive separation of intermolecular Coulomb interactions into strong short-range and uniformly slowly varying long-range components. This allows us to accurately determine the averaged effects of the long-range components on the short-range structure using effective single particle fields and analytical corrections, greatly reducing the need for complex lattice summation techniques used in most standard approaches. Furthermore, the simplest use of these ideas in aqueous solutions leads to the short solvent (SS) model, where both solvent–solvent and solute–solvent Coulomb interactions have only short-range components. Here we use the SS model to give a simple description of pairing of nucleobases and biologically relevant ions in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of the Atomic Structure at the BiVO 4 /TiO 2 Interface on the Electronic Properties and Performance of BiVO 4 /TiO 2 Photoanodes

In photoelectrochemical cells, semiconductor electrodes are usually interfaced with protection layers to extend their stability. Ideally, the protection layer should not decrease photocurrent generation. Hence, the conduction band minimum (CBM) and valence band maximum (VBM) of the protection layer should appropriately align with those of the underlying semiconductor electrode to facilitate the desired interfacial charge transfer with minimal interfacial recombination. However, predicting interfacial band alignment can be challenging, as it may vary depending on the detailed interfacial atomic structure. Investigating the effect of the atomic structure at the semiconductor/protection layer junction on the band alignment is also challenging as it requires samples with varied interfaces without altering the semiconductor and protection layers. Here, we considered TiO 2 , the most widely used material as a protection layer, interfaced with a BiVO 4 photoanode, and we fabricated two n-type BiVO 4 (010)/TiO 2 photoanodes where a thin (∼4 nm) amorphous TiO 2 layer was deposited by atomic layer deposition (ALD). While the individual BiVO 4 (010) and TiO 2 layers were identical in these two samples, we modified the interfacial atomic structure at the BiVO 4 /TiO 2 junction by changing which precursor, Ti or O, was introduced first upon deposition of TiO 2 . By experimentally and computationally investigating the differences in these two samples, we show that the band alignments between BiVO 4 and TiO 2 at the interface may not be straightforwardly predicted by the CBM and VBM of bulk BiVO 4 and TiO 2 and that interfacial atomic arrangements can have a marked impact on the electronic properties and photoelectrochemical performance of the BiVO 4 (010)/TiO 2 photoanode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effective theory of superconductivity in strongly coupled amorphous materials

A theory of phonon-mediated superconductivity in strong-coupling amorphous materials is developed based on an effective description of structural disorder and its effect on the vibrational spectrum. The theory accounts for the diffusivelike transport of vibrational excitations due to disorder-induced scattering within the Eliashberg theory of strong-coupling superconductivity. The theory provides a good analytical description of the Eliashberg function $α^2F(ω)$ in comparison with experiments and allows one to disentangle the effects of transverse and longitudinal excitations on the Eliashberg function. In particular, it shows that the transverse excitations play a crucial role in driving an increase or excess in the Eliashberg function at low energy, which is related to the boson peak phenomenon in vibrational spectra of glasses. This low-energy excess, on the one hand, drives an enhancement of the electron-phonon coupling but at the same time reduces the characteristic energy scale $ω_{\text{log}}$ in the Allen-Dynes formula. As a consequence, the nonmonotonicity of $T_c$ as a function of alloying (disorder) in Pb-based systems can be rationalized. Further, the case of Al-based systems, where disorder increases $T_c$ from the start, is also analyzed. General material-design principles for enhancing $T_c$ in amorphous superconductors are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure effects for Casimir forces in chiral metamaterials

We examine a recent prediction for the chirality dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. Although repulsion in the metamaterial regime is rigorously impossible, it is unknown whether a reduction in the attractive force can be achieved through suitable material engineering. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized ''omega''-particle medium in the dilute approximation and identify the effects of structural inhomogeneity (i.e., proximity forces and anisotropy). We find that these microstructure effects dominate the force for separations where chirality was predicted to have a strong influence. At separations where the homogeneous approximation is valid, in even the most ideal circumstances the effects of chirality are less than 10{sup -4} of the total force, making them virtually undetectable in experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compressive Response and Energy Absorption of Additively Manufactured Elastomers with Varied Simple Cubic Architectures

Additive manufacturing, and particularly the vat photopolymerization process, enables the fabrication of complex geometries at high resolution and small length scales, making it well-suited for fabricating cellular structures (e.g., foams and lattices). Among these, elastomeric cellular structures are of growing interest due to their tunable compliance and energy dissipation. However, comprehensive data on the compressive behavior of these structures remains limited, especially for investigating the structure-property effects from changing the density and distribution of material within the cellular structure. This study explores how the mechanical response of polyurethane-based simple cubic structures changes when varying volume fraction, unit cell length, and unit cell patterning, which have not been systematically investigated previously in additively manufactured elastomers. Increasing volume fraction from 10% to 50% yielded significant changes in compressive stress–strain performance (decreasing strain at 0.5 MPa by 41.6% and increasing energy absorption density by 3962.5%). Although changing the unit cell length between 2.5 and 7 mm in ~30 mm parts did not result in statistically different stress–strain responses, modifying the configuration of struts of different thicknesses across designs with 30% volume fraction altered the stress–strain behavior (differences of 12.5% in strain at 0.5 MPa and 109.4% for energy absorption density). Power law relationships were developed to understand the interactions between volume fraction, unit cell length, and elastic modulus, and experimental data showed strong fits (R 2 > 0.91). These findings enhance the understanding of how multiple structural design aspects influence the performance of elastomeric cellular materials, providing a foundation for informing strategic design of tailorable materials for diverse mechanical applications.

36 MATERIALS SCIENCE↗

Effects of Mn substitution on the structure and properties of chalcopyrite-type CuInSe{sub 2}

Mn-doped CuInSe{sub 2} compounds (CuIn{sub 1-x}Mn{sub x}Se{sub 2}, x=0.0125-0.20 and Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2}, 2y=0.0125-0.60) were synthesized by high-temperature solid-state reactions. Single phase materials with chalcopyrite structure persist up to 0.10 and 0.20 doping for CuIn{sub 1-x}Mn{sub x}Se{sub 2} and Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2}, respectively. The chalcopyrite and sphalerite phases co-exist in the Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2} system for 2y=0.25-0.50. Attempts to introduce greater manganese content, x=0.15-0.20 for CuIn{sub 1-x}Mn{sub x}Se{sub 2} and 2y=0.60 for Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2}, result in partial phase segregation. For the single-phase samples, the lattice parameters of both systems increase linearly with manganese concentration and thus follow Vegard's law. The temperature of the chalcopyrite-sphalerite phase transition is decreased by manganese substitution for all single-phase samples. The bandgap of the materials remains around 0.9 eV. Additionally, the Mn-doped CuInSe{sub 2} compounds display paramagnetic behavior, whereas pure CuInSe{sub 2} is diamagnetic at 5-300 K. All the CuIn{sub 1-x}Mn{sub x}Se{sub 2} and Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2} compounds with chalcopyrite structure show antiferromagnetic coupling and measured effective magnetic moments up to 5.8 mu{sub B}/Mn. - Graphical abstract: The manganese solid solubility can reach up to 10% and 20% for CuIn{sub 1-x}Mn{sub x}Se{sub 2} and Cu{sub 1-y}In{sub 1-y}Mn{sub 2y}Se{sub 2}, respectively, while maintaining phase-pure, chalcopyrite-type materials. Lattice parameters increase linearly with increase manganese concentration suggesting that the manganese ions are distributed randomly on both the indium site and the copper and indium sites simultaneously.

36 MATERIALS SCIENCE↗

Effective protein-protein interaction from structure factor data of a lysozyme solution

We report the determination of an effective protein-protein central potential for a lysozyme solution, obtained from the direct inversion of the total structure factor of the system, as extracted from small angle neutron scattering. The inversion scheme rests on a hypernetted-chain relationship between the effective potential and the structural functions, and is preliminarily tested for the case of a Lennard-Jones interaction. The characteristics of our potential are discussed in comparison with current models of effective interactions in complex fluids. The phase behavior predictions are also investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Temperature Irradiation Effects in Selected Generation IV Structural Alloys

In the Generation IV Materials Program cross-cutting task, irradiation and testing were carried out to address the issue of high temperature irradiation effects with selected current and potential candidate metallic alloys. The materials tested were (1) a high-nickel iron-base alloy (Alloy 800H); (2) a nickel-base alloy (Alloy 617); (3) two advanced nano-structured ferritic alloys (designated 14YWT and 14WT); and (4) a commercial ferritic-martensitic steel (annealed 9Cr-1MoV). Small tensile specimens were irradiated in rabbit capsules in the High-Flux Isotope Reactor at temperatures from about 550 to 700 C and to irradiation doses in the range 1.2 to 1.6 dpa. The Alloy 800H and Alloy 617 exhibited significant hardening after irradiation at 580 C; some hardening occurred at 660 C as well, but the 800H showed extremely low tensile elongations when tested at 700 C. Notably, the grain boundary engineered 800H exhibited even greater hardening at 580 C and retained a high amount of ductility. Irradiation effects on the two nano-structured ferritic alloys and the annealed 9Cr-1MoV were relatively slight at this low dose.

36 MATERIALS SCIENCE↗

Effect of Silicon, Carbon, and Sulfur on Structure of Liquid Iron and Implications for Structure-Property Relations in Liquid Iron-Light Element Alloys

Planetary cores are considered to be composed of iron (Fe) and light elements. Extensive studies on structure and properties of crystalline Fe–light element alloys have been carried out to discuss composition and structure of the solid inner core. In contrast, structure and properties of liquid Fe–light element alloys, which are important to discuss nature and dynamics of the liquid outer core, remain poorly understood. Here we conducted series of liquid structure measurements to systematically understand effect of silicon (Si), carbon (C), and sulfur (S) on structure of liquid Fe. We found that incorporation of Si in liquid Fe shortens the nearest (r 1 ) and second (r 2 ) neighbor distances, while incorporation of C and small amount of S expands these distances. The different structural behavior is interpreted in view of different light–element incorporation mechanisms: substitutional incorporation of Si and interstitial incorporation of C and S. All light elements lower density of liquid Fe regardless of shortening or expansion of the r 1 and r 2 distances, while P–wave velocities of liquid Fe–light element alloys show linear increase with shortening of the r 1 and r 2 . The different light–element incorporation behavior in the structure of liquid Fe and the resultant variation in the properties of liquid Fe–light element alloys should be important in understanding behavior of liquid Fe–light element alloys in the planetary cores.

58 GEOSCIENCES↗

Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications

Aiming to develop alloys with better properties for orthopedic applications, the focus of the present research was to evaluate the effect of Mo at.% content on structural, mechanical, and tribological properties of hot isostatically pressed Ti-xMo (x = 4, 8, 12, 15, and 20 at.%) alloys. The structural evolution, mechanical properties, and tribological behavior of the nanostructured Ti-xMo alloys were evaluated using x-ray diffraction, scanning electron microscope, and ball-on-disk tribometer. Wear tests were conducted under different applied loads of 2, 8, and 16 N. Experimental results indicated that the structural evolution and morphological changes of the milled alloys were sensitive to their molybdenum (Mo) content. The morphological characterization showed that the crystallite size and the particle size decreased with increasing Mo content (at.%) reaching the lowest values of 27 and 26 nm in the case of Ti-15Mo and Ti-20Mo, respectively. On the other hand, the coefficient of friction and wear rates were found to be decreasing with increasing Mo content.

36 MATERIALS SCIENCE↗

New measurements of the EMC effect in light nuclei

Modifications of structure functions in nuclei (EMC effect) suggest that the nuclear quark distribution function is not just the incoherent sum of the proton and neutron distributions, and made clear the importance of nuclear effects even in high energy measurements. Jefferson Lab experiment E03-103 made precise measurements of the EMC effect in few-body and heavy nuclei with emphasis on the large x region. Data from the light nuclei suggests that the nuclear dependence of the high x quark distribution may depend on the nucleon's local environment, rather than being a purely bulk effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Initial development for the introduction of provisions for irradiation effects in Division 5 rules

Heat pipe microreactor concept involves the use of a solid core block to encapsulate the nuclear fuel and the passive extraction of heat from the core block to the heat exchanger block by advanced heat pipes. The core block is a key component of the heat pipe microreactor design. It integrates the functions of reactor vessel, core structural components and fuel cladding of traditional Gen IV advanced reactor designs into one single structure. The effects of irradiation on the structural failure modes are outside the scope of the rules of the ASME Boiler and Pressure Vessel Code, Section III, Division 5, Subsection HB, Subpart B for metallic Class A components. Methods to account for the irradiation effect were investigated in order to develop design methods that can be applied to the core block design in the heat pipe microreactor. This report presents an initial development of an approach to account for the irradiation effects in the design rules.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effects of naturally occurring charged mutations on the structure, stability, and binding of the Pin1 WW domain

Pin1 is a peptidyl-prolyl cis-trans isomerase, whose WW domain specifically recognizes the pSer/Thr-Pro motif. Pin1 is involved in multiple phosphorylation events that regulate the activities of various substrates, and Pin1 deregulation has been reported in various diseases, including cancer and Alzheimer's disease. The WW domain of Pin1 has been used as a small model protein to investigate the folding mechanisms of the β-sheet structure by studying the effect of mutations or its naturally occurring variants. However, only a few studies have investigated the structure and binding of Pin1 WW mutants. In the present work, two naturally occurring Pin1 WW variants, namely, G20D and S16R, derived from the cynomolgus monkey and African green monkey, respectively, were selected to investigate the influence of charge mutation on the structure, stability, and binding properties of the Pin1 WW domain. Analysis using a combination of nuclear magnetic resonance (NMR) and chemical shift-based calculations revealed that the G20D and S16R mutants had high structural similarity to the wild-type Pin1 WW domain. However, the presence of a charge mutation significantly decreased the stability of the Pin1 WW domain. Both the wild-type and G20D forms of the Pin1 WW domain utilized a three-site mode to bind to a phosphorylated Tau peptide, pT231, whereas the S16R mutant binds to the pT231 peptide either in a non-specific manner or through a totally different binding mechanism. Correspondingly, the wild-type and two mutant Pin1 WW domains showed different binding affinities to the Tau phosphopeptide. Considering that the WW domain participates in the catalytic activity of the Pin1 isomerase, our study represents a novel approach for studying Pin1 function through the analysis of its naturally occurring mutants. - Highlights: • G20D and S16R Pin1 WW had high structure similarity to wild-type. • Stabilities of G20D and S16R mutant Pin1 WW significantly decreased. • wild-type and G20D Pin1 WW utilized three-site mode for phosphorylated Tau binding. • wild-type and mutant Pin1 WW showed differential binding affinities to substrate.

60 APPLIED LIFE SCIENCES↗

Effect of lattice strain on structural and optical properties of ZnO nanorods grown by hydrothermal method

In this work, we have synthesized ZnO nanorods over ZnO seeds/ITO/glass substrate by the facile hydrothermal method. ZnO seeds are grown at different temperatures ranging from 150°C to 550°C in steps of 100°C. We have studied the effect of strain on the structural and optical properties of ZnO nanorods. It was observed that the growth temperature of seed layer has an influence over the lattice strain present in the nanorods. The as synthesized nanorods were characterized by scanning electron microscope (SEM), x-ray diffraction (XRD) and photoluminescence (PL). SEM images confirm the formation of dense arrays of vertically aligned nanorods on seeds which are grown at 350°C. In addition to this, XRD patterns reveal that these ZnO nanorods are preferentially oriented along (002) direction. The strain analysis based on the XRD results reveals that the minimum value of strain is obtained at 350°C which is attributed to the improved crystalline quality of the interface of seed layer and nanorods leading to their c-axis alignment and enhancement of ultraviolet emission as observed in the PL spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of crystallization water on the structural and electrical properties of CuWO{sub 4} under high pressure

The effect of crystallization water on the structural and electrical properties of CuWO{sub 4} under high pressure has been investigated by in situ X-ray diffraction and alternating current impedance spectra measurements. The crystallization water was found to be a key role in modulating the structural stability of CuWO{sub 4} at high pressures. The anhydrous CuWO{sub 4} undergoes two pressure-induced structural transitions at 8.8 and 18.5 GPa, respectively, while CuWO{sub 4}·2H{sub 2}O keeps its original structure up to 40.5 GPa. Besides, the crystallization water makes the electrical transport behavior of anhydrous CuWO{sub 4} and CuWO{sub 4}·2H{sub 2}O quite different. The charge carrier transportation is always isotropic in CuWO{sub 4}·2H{sub 2}O, but anisotropic in the triclinic and the third phase of anhydrous CuWO{sub 4}. The grain resistance of CuWO{sub 4}·2H{sub 2}O is always larger than that of anhydrous CuWO{sub 4} in the entire pressure range. By analyzing the relaxation response, we found that the large number of hydrogen bonds can soften the grain characteristic frequency of CuWO{sub 4}·2H{sub 2}O over CuWO{sub 4} by one order of magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Organic Electrochemical Transistor Channel Materials: Copolymerization Versus Physical Mixing of Glycolated and Alkoxylated Polymers

Organic electrochemical transistors (OECTs) feature a polymer channel capable of conducting both ions and electronic charges. The choice of the channel material is critical for OECT performance. Many efforts have focused on improving performance via the chemical tunability of conjugated polymers – through backbone, side chain, and molar mass engineering – leading to useful design principles for accumulation-mode OECT materials. However, tuning the chemical structure of conjugated polymers often requires time-consuming optimization of the synthesis route. Meanwhile, variations in molar mass, dispersity, structural defects, and metal content present challenges when attempting to analyze the detailed effects of structural modifications, as multiple performance-determining factors are often (unintentionally) changed at the same time. Therefore, this study explores blended channel materials obtained by physically mixing glycolated and alkoxylated polymers in different ratios, and compares their OECT performance with the corresponding statistical copolymers. It is shown that mixing two well-performing materials creates blends that enable rational tuning of the transistor properties without compromising on performance. Thus, channels based on blends of alkoxylated and glycolated polymers hold promise for OECT technology with tailored response, as only two materials are needed to achieve any desired side chain ratio, simplifying the optimization of OECT characteristics.

copolymerization↗

Waveguide effect of GaAsSb quantum wells in a laser structure based on GaAs

The waveguide effect of GaAsSb quantum wells in a semiconductor-laser structure based on GaAs is studied theoretically and experimentally. It is shown that quantum wells themselves can be used as waveguide layers in the laser structure. As the excitation-power density attains a value of 2 kW/cm{sup 2} at liquid-nitrogen temperature, superluminescence at the wavelength corresponding to the optical transition in bulk GaAs (at 835 nm) is observed.

36 MATERIALS SCIENCE↗