Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

INTERACTIONS BETWEEN CORONAL MASS EJECTIONS VIEWED IN COORDINATED IMAGING AND IN SITU OBSERVATIONS

The successive coronal mass ejections (CMEs) from 2010 July 30 to August 1 present us the first opportunity to study CME-CME interactions with unprecedented heliospheric imaging and in situ observations from multiple vantage points. We describe two cases of CME interactions: merging of two CMEs launched close in time and overtaking of a preceding CME by a shock wave. The first two CMEs on August 1 interact close to the Sun and form a merged front, which then overtakes the July 30 CME near 1 AU, as revealed by wide-angle imaging observations. Connections between imaging observations and in situ signatures at 1 AU suggest that the merged front is a shock wave, followed by two ejecta observed at Wind which seem to have already merged. In situ measurements show that the CME from July 30 is being overtaken by the shock at 1 AU and is significantly compressed, accelerated, and heated. The interaction between the preceding ejecta and shock also results in variations in the shock strength and structure on a global scale, as shown by widely separated in situ measurements from Wind and STEREO B. These results indicate important implications of CME-CME interactions for shock propagation, particle acceleration, and space weather forecasting.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimization of Optical and Electronic properties of Carbon Fullerenes: Symmetry-Reduced C60 and Dumbbell-Like Novel Structures

Using quantum chemical density functional calculations, we study two possible pathways for manipulating the optical and electronic properties of all-carbon fullerenes structures. In the first, the optical properties of C{sub 60} are shown to be enhanced via reduction of the perfectly spherical Ih symmetry structure to energetically feasible lower symmetries. A D{sub 3d} symmetry structure of C{sub 60} proved to be 39 meV lower in energy than the Ih conformation. This reduction in symmetry activates otherwise silent modes in the IR and Raman spectra, possibly achievable via solvation effects. In the second pathway, fusing a building block of an-all carbon hexagonal unit as a connector between two C{sub 60} cages is considered. Optimizations on a resulting series of dumbbell-like structures, molecular C{sub 126}, C{sub 132}, C{sub 138}, C{sub 144}, and C{sub 180}, impart distinct variation in the electronic properties of these novel structures with size. These structures are further shown to support stable anionic radical forms.

36 MATERIALS SCIENCE↗

The crystal structure of Neisseria gonorrhoeae PriB reveals mechanistic differences among bacterial DNA replication restart pathways

Reactivation of repaired DNA replication forks is essential for complete duplication of bacterial genomes. However, not all bacteria encode homologs of the well-studied Escherichia coli DNA replication restart primosome proteins, suggesting that there might be distinct mechanistic differences among DNA replication restart pathways in diverse bacteria. Since reactivation of repaired DNA replication forks requires coordinated DNA and protein binding by DNA replication restart primosome proteins, we determined the crystal structure of Neisseria gonorrhoeae PriB at 2.7 {angstrom} resolution and investigated its ability to physically interact with DNA and PriA helicase. Comparison of the crystal structures of PriB from N. gonorrhoeae and E. coli reveals a well-conserved homodimeric structure consisting of two oligosaccharide/oligonucleotide-binding (OB) folds. In spite of their overall structural similarity, there is significant species variation in the type and distribution of surface amino acid residues. This correlates with striking differences in the affinity with which each PriB homolog binds single-stranded DNA and PriA helicase. These results provide evidence that mechanisms of DNA replication restart are not identical across diverse species and that these pathways have likely become specialized to meet the needs of individual organisms.

36 MATERIALS SCIENCE↗

Theoretical study of dissociative recombination of Cl{sub 2}{sup +}

Theoretical studies of low-energy electron collisions with Cl{sub 2}{sup +} leading to direct dissociative recombination are presented. The relevant potential energy curves and autoionization widths are calculated by combining electron scattering calculations using the complex Kohn variational method with multireference configuration interaction structure calculations. The dynamics on the four lowest resonant states of all symmetries is studied by the solution of a driven Schroedinger equation. The thermal rate coefficient for dissociative recombination of Cl{sub 2}{sup +} is calculated and the influence on the thermal rate coefficient from vibrational excited target ions is investigated.

74 ATOMIC AND MOLECULAR PHYSICS↗

THE REMARKABLE HIGH PRESSURE OF THE LOCAL LEO COLD CLOUD

Using the Space Telescope Imaging Spectrograph (STIS) on board the Hubble Space Telescope, we have obtained high-resolution ultraviolet spectra of the C I absorption toward two stars behind the Local Leo Cold Cloud (LLCC). At a distance ( Almost-Equal-To 20 pc) that places it well inside the Local Bubble, the LLCC is the nearest example of the coldest known (T Almost-Equal-To 20 K) diffuse interstellar clouds. The STIS measurements of the C I fine-structure excitation toward HD 85259 and HD 83023 indicate that the thermal gas pressure of the LLCC is much greater than that of the warm clouds in the Local Bubble. The mean LLCC pressure measured toward these two stars (60,000 cm{sup -3} K) implies an H I density of Almost-Equal-To 3000 cm{sup -3} and a cloud thickness of Almost-Equal-To 200 AU at the 20 K cloud temperature. Such a thin, cold, dense structure could arise at the collision interface between converging flows of warm gas. However, the measured LLCC pressure is appreciably higher than that expected in the colliding-cloud interpretation given the velocity and column density constraints on warm clouds in the HD 85259 and HD 83023 sightlines. Additional STIS measurements of the Zn II, Ni II, and Cr II column densities toward HD 85259 indicate that the LLCC has a modest 'warm cloud' dust depletion pattern consistent with its low dust-to-gas ratio determined from H I 21 cm and 100 {mu}m observations. In support of the inferred sheet-like geometry for the LLCC, a multi-epoch comparison of the Na I absorption toward a high-proper-motion background star reveals a 40% column density variation indicative of LLCC Na I structure on a scale of Almost-Equal-To 50 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

Self-Limitations of Heat Release in Coupled Core-Shell Spinel Ferrite Nanoparticles: Frequency, Time, and Temperature Dependencies

We explored a series of highly uniform magnetic nanoparticles (MNPs) with a core-shell nanoarchitecture prepared by an efficient solvothermal approach. In our study, we focused on the water dispersion of MNPs based on two different CoFe 2 O 4 core sizes and the chemical nature of the shell (MnFe 2 O 4 and spinel iron oxide). We performed an uncommon systematic investigation of the time and temperature evolution of the adiabatic heat release at different frequencies of the alternating magnetic field (AMF). Our systematic study elucidates the nontrivial variations in the heating efficiency of core-shell MNPs concerning their structural, magnetic, and morphological properties. In addition, we identified anomalies in the temperature and frequency dependencies of the specific power absorption (SPA). We conclude that after the initial heating phase, the heat release is governed by the competition of the Brown and Néel mechanism. In addition, we demonstrated that a rational parameter sufficiently mirroring the heating ability is the mean magnetic moment per MNP. Our study, thus, paves the road to fine control of the AMF-induced heating by MNPs with fine-tuned structural, chemical, and magnetic parameters. Importantly, we claim that the nontrivial variations of the SPA with the temperature must be considered, e.g., in the emerging concept of MF-assisted catalysis, where the temperature profile influences the undergoing chemical reactions.

36 MATERIALS SCIENCE↗

Characterization of MoS 2 films via simultaneous grazing incidence X-ray diffraction and grazing incidence X-ray fluorescence (GIXRD/GIXRF)

Physical vapor deposited (PVD) molybdenum disulfide (nominal composition MoS 2 ) is employed as a thin film solid lubricant for extreme environments where liquid lubricants are not viable. The tribological properties of MoS 2 are highly dependent on morphological attributes such as film thickness, orientation, crystallinity, film density, and stoichiometry. These structural characteristics are controlled by tuning the PVD process parameters, yet undesirable alterations in the structure often occur due to process variations between deposition runs. Nondestructive film diagnostics can enable improved yield and serve as a means of tuning a deposition process, thus enabling quality control and materials exploration. Grazing incidence X-ray diffraction (GIXRD) for MoS 2 film characterization provides valuable information about film density and grain orientation (texture). However, the determination of film stoichiometry can only be indirectly inferred via GIXRD. The combination of density and microstructure via GIXRD with chemical composition via grazing incidence X-ray fluorescence (GIXRF) enables the isolation and decoupling of film density, composition, and microstructure and their ultimate impact on film layer thickness, thereby improving coating thickness predictions via X-ray fluorescence. We have augmented an existing GIXRD instrument with an additional X-ray detector for the simultaneous measurement of energy-dispersive X-ray fluorescence spectra during the GIXRD analysis. This combined GIXRD/GIXRF analysis has proven synergetic for correlating chemical composition to the structural aspects of MoS 2 films provided by GIXRD. We present the usefulness of the combined diagnostic technique via exemplar MoS 2 film samples and provide a discussion regarding data extraction techniques of grazing angle series measurements.

MoS2↗

Contact heterogeneities in feral swine: implications for disease management and future research

Abstract Contact rates vary widely among individuals in socially structured wildlife populations. Understanding the interplay of factors responsible for this variation is essential for planning effective disease management. Feral swine ( Sus scrofa ) are a socially structured species which pose an increasing threat to livestock and human health, and little is known about contact structure. We analyzed 11 GPS data sets from across the United States to understand the interplay of ecological and demographic factors on variation in co‐location rates, a proxy for contact rates. Between‐sounder contact rates strongly depended on the distance among home ranges (less contact among sounders separated by >2 km; negligible between sounders separated by >6 km), but other factors causing high clustering between groups of sounders also seemed apparent. Our results provide spatial parameters for targeted management actions, identify data gaps that could lead to improved management and provide insight on experimental design for quantitating contact rates and structure.

60 APPLIED LIFE SCIENCES↗

Mononuclear ruthenium polypyridine complexes that catalyze water oxidation

Over the past decade, significant advances have been made in the development of molecular water oxidation catalysts (WOCs) in the context of developing a system that would accomplish artificial photosynthesis. Mononuclear ruthenium complexes with polypyridine ligands have drawn considerable attention in this regard, due to their high catalytic activity and relatively simple structure. In this perspective review, we will discuss mononuclear Ru polypyridine WOCs by organizing them into four groups according to their ligand environments. Each group will be discussed with regard to three fundamental questions: first, how does the catalyst initiate O–O bond formation? Second, which step in the catalytic cycle is rate-determining? Third, how efficient is the catalyst according to the specific descriptors such as turnover frequency? All discussion is based on the high-valent ruthenium intermediates that are proposed in the catalytic cycle according to experimental observation and theoretical simulation. Two fundamental mechanisms are set forth. An acid–base mechanism that involves the attack of a water molecule on the oxo of a high valent Ru=O species to form the O–O bond. Subsequent steps lead to dissociation of O 2 and rehydration of the metal center. A second mechanism involves the formation of a Ru–O˙ radical species, two of which then couple to form a Ru–O–O–Ru species that can release O 2 afterwards. The acid–base mechanism appears to be more common and mechanistic differences could result from variation directly related to polypyridine ligand structures. Thus, understanding how electronic, steric, and conformational properties can effect catalyst performance will lead to the rational design of more effective WOCs with not only ruthenium but also other transition metals.

14 SOLAR ENERGY↗

Specific features of the photoluminescence of HEMT nanoheterostructures containing a composite InAlAs/InGaAs/InAs/InGaAs/InAlAs quantum well

The specific features of the photoluminescence and the electrical properties of doped nanoheterostructures containing a composite InAlAs/InGaAs/InAlAs quantum well with a thin InAs insert in the middle are studied. The insert thickness is varied in the range from 1.7 to 3.0 nm. It is established that the position of the peaks in the photoluminescence spectra in the photon energy range 0.6–0.8 eV correlates with the InAs insert thickness. Simulation of the band structure shows that the experimentally observed variation in the energy of optical transitions is associated with lowering of the energy of electron and hole states in the quantum well with increasing insert thickness. In the photon energy range 1.24–1.38 eV, optical transitions in the region of the InAlAs buffer-InP substrate interface are observed. The signal photon energy and intensity depend on the features of the formation of this heterointerface and on the conditions of substrate annealing. It is conceived that this is due to the formation of a transition region between the InAlAs buffer and the substrate.

36 MATERIALS SCIENCE↗

Surface properties and performance for VOCs combustion of LaFe{sub 1-y}Ni{sub y}O{sub 3} perovskite oxides

LaFeO{sub 3}, LaNiO{sub 3} and substituted LaFe{sub 1-y}Ni{sub y}O{sub 3} (y=0.1, 0.2 and 0.3) perovskites were synthesized by the citrate method and used in the catalytic combustion of ethanol and acetyl acetate. Chemical composition was determined by atomic absorption spectrometry (AAS) and specific areas from nitrogen adsorption isotherms. Structural details and surface properties were evaluated by temperature-programmed reduction (TPR), infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), temperature-programmed desorption of oxygen (O{sub 2}-TPD) and photoelectron spectroscopy (XPS). Characterization data revealed that total insertion of nickel in the LaFeO{sub 3} takes place for substitution y=0.1. However, NiO segregation occurs to some extent, specifically at higher substitutions (y>0.1). The catalytic performance of these perovskites was evaluated in the combustion of acetyl acetate and ethanol. Among these molecules, ethanol exhibited the lowest ignition temperature, and the catalytic activity expressed as intrinsic activity (mol m{sup -2} h{sup -1}) was found to increase substantially with the nickel substitution. These results can be explained in terms of the cooperative effect of a LaFe{sub 1-y}Ni{sub y}O{sub 3} and NiO phases, whose relative concentration determines the oxygen activation capability and hence their reactivity. - Graphical abstract: LaFeO{sub 3}, LaNiO{sub 3} and substituted LaFe{sub 1-y}Ni{sub y}O{sub 3} (y=0.1, 0.2 and 0.3) perovskite-type oxides have been investigated as catalysts in the total combustion of ethanol and acetylacetate. The characterization indicate variation in specific surface area, crystal structure, reducibility and surface composition. The catalytic activity expressed as intrinsic activity (mol m{sup -2} h{sup -1}) increases with nickel substitution. A synergy between Ni{sup 3+} and Fe{sup 3+} cations at the B position of the LaFe{sub 1-y}Ni{sub y}O{sub 3} perovskite for VOCs combustion was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Natural Allelic Variations in Highly Polyploidy Saccharum Complex

Sugarcane ( Saccharum spp.) is an important sugar and biofuel crop with high polyploid and complex genomes. The Saccharum complex, comprised of Saccharum genus and a few related genera, are important genetic resources for sugarcane breeding. A large amount of natural variation exists within the Saccharum complex. Though understanding their allelic variation has been challenging, it is critical to dissect allelic structure and to identify the alleles controlling important traits in sugarcane. To characterize natural variations in Saccharum complex, a target enrichment sequencing approach was used to assay 12 representative germplasm accessions. In total, 55,946 highly efficient probes were designed based on the sorghum genome and sugarcane unigene set targeting a total of 6 Mb of the sugarcane genome. A pipeline specifically tailored for polyploid sequence variants and genotype calling was established. BWAmem and sorghum genome approved to be an acceptable aligner and reference for sugarcane target enrichment sequence analysis, respectively. Genetic variations including 1,166,066 non-redundant SNPs, 150,421 InDels, 919 gene copy number variations, and 1,257 gene presence/absence variations were detected. SNPs from three different callers (Samtools, Freebayes, and GATK) were compared and the validation rates were nearly 90%. Based on the SNP loci of each accession and their ploidy levels, 999,258 single dosage SNPs were identified and most loci were estimated as largely homozygotes. An average of 34,397 haplotype blocks for each accession was inferred. The highest divergence time among the Saccharum spp. was estimated as 1.2 million years ago (MYA). Saccharum spp. diverged from Erianthus and Sorghum approximately 5 and 6 MYA, respectively. Furthermore, the target enrichment sequencing approach provided an effective way to discover and catalog natural allelic variation in highly polyploid or heterozygous genomes.

59 BASIC BIOLOGICAL SCIENCES↗

Combining Poisson singular integral and total variation prior models in image restoration

In this study, a novel Bayesian image restoration method based on a combination of priors is presented. It is well known that the Total Variation(TV) image prior preserves edge structures while imposing smoothness on the solutions.However,it tends to oversmooth textured areas.To alleviate this problem we propose to combine the TV and the Poisson Singular Integral(PSI)models, which,as we will show, preserves the image textures. The PSI prior depends on a parameter that controls the shape of the filter. A study on the behavior of the filter as a function of this parameter is presented. Our restoration model utilizes a bound for the TV image model based on the majorization–minimization principle,and performs maximum a posteriori Bayesian inference. In order to assess the performance of the proposed approach,in the experimental section we compare it with other restoration methods.

97 MATHEMATICS AND COMPUTING↗

FREE TRANSLATIONAL OSCILLATIONS OF ICY BODIES WITH A SUBSURFACE OCEAN USING A VARIATIONAL APPROACH

We analyze the influence of the interior structure of an icy body with an internal ocean on the relative translational motions of its solid constituents. We consider an isolated body differentiated into three homogeneous layers with spherical symmetry: an external ice-I layer, a subsurface ammonia-water ocean, and a rocky inner core. This composition represents icy bodies such as Europa, Titania, Oberon, and Triton, as well as Pluto, Eris, Sedna, and 2004 DW. We construct the equations of motion by assuming that the solid constituents are rigid and that the ocean is an ideal fluid, the internal motion being characterized by the relative translations of the solids and the induced flow in the fluid. Then we determine the dynamics of the icy body using the methods of analytical mechanics, that is, we compute the kinetic energy and the gravitational potential energy, and obtain the Lagrangian function. The resulting solution of the Lagrange equations shows that the solid layers perform translational oscillations of different amplitudes with respect to the barycenter of the body. We derive the dependence of the frequency of the free oscillations of the system on the characteristics of each layer, expressing the period of the oscillations as a function of the densities and masses of the ocean and the rocky inner core, and the mass of the icy body. We apply these results to previously developed subsurface models and obtain numerical values for the period and the ratio between the amplitudes of the translational oscillations of the solid components. The features obtained are quite different from the cases of Earth and Mercury. Our analytical formulas satisfactorily explain the source of these differences. When models of the same icy body, compatible with the existence of an internal ocean, differ in the thickness of the ice-I layer, their associated periods experience a relative variation of at least 10%. In particular, the different models for Titania and Oberon exhibit a larger variation of about 37% and 30%. This indicates an absolute difference of the order of three and two hours, respectively. This suggests that the free period of the internal oscillations might provide a new procedure to constrain the internal structure of icy bodies with a subsurface ocean.

79 ASTRONOMY AND ASTROPHYSICS↗

Reduced dimension rovibrational variational calculations of the S{sub 1} state of C{sub 2}H{sub 2}. I. Methodology and implementation

The bending and torsional degrees of freedom in S{sub 1} acetylene, C{sub 2}H{sub 2}, are subject to strong vibrational resonances and rovibrational interactions, which create complex vibrational polyad structures even at low energy. As the internal energy approaches that of the barrier to cis-trans isomerization, these energy level patterns undergo further large-scale reorganization that cannot be satisfactorily treated by traditional models tied to local minima of the potential energy surface for nuclear motion. Experimental spectra in the region near the cis-trans transition state have revealed these complicated new patterns. In order to understand near-barrier spectroscopic observations and to predict the detailed effects of cis-trans isomerization on the rovibrational energy level structure, we have performed reduced dimension rovibrational variational calculations of the S{sub 1} state. In this paper, we present the methodological details, several of which require special care. Our calculation uses a high accuracy ab initio potential surface and a fully symmetrized extended complete nuclear permutation inversion group theoretical treatment of a multivalued internal coordinate system that is appropriate for large amplitude bending and torsional motions. We also discuss the details of the rovibrational basis functions and their symmetrization, as well as the use of a constrained reduced dimension rovibrational kinetic energy operator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small Fast Spectrum Reactor Designs Suitable for Direct Nuclear Thermal Propulsion

Advancement of U.S. scientific, security, and economic interests through a robust space exploration program requires high performance propulsion systems to support a variety of robotic and crewed missions beyond low Earth orbit. Past studies, in particular those in support of both the Strategic Defense Initiative (SDI) and Space Exploration Initiative (SEI), have shown nuclear thermal propulsion systems provide superior performance for high mass high propulsive delta-V missions. The recent NASA Design Reference Architecture (DRA) 5.0 Study re-examined mission, payload, and transportation system requirements for a human Mars landing mission in the post-2030 timeframe. Nuclear thermal propulsion was again identified as the preferred in-space transportation system. A common nuclear thermal propulsion stage with three 25,000-lbf thrust engines was used for all primary mission maneuvers. Moderately lower thrust engines may also have important roles. In particular, lower thrust engine designs demonstrating the critical technologies that are directly extensible to other thrust levels are attractive from a ground testing perspective. An extensive nuclear thermal rocket technology development effort was conducted from 1955-1973 under the Rover/NERVA Program. Both graphite and refractory metal alloy fuel types were pursued. Reactors and engines employing graphite based fuels were designed, built and ground tested. A number of fast spectrum reactor and engine designs employing refractory metal alloy fuel types were proposed and designed, but none were built. The Small Nuclear Rocket Engine (SNRE) was the last engine design studied by the Los Alamos National Laboratory during the program. At the time, this engine was a state-of-the-art graphite based fuel design incorporating lessons learned from the very successful technology development program. The SNRE was a nominal 16,000-lbf thrust engine originally intended for unmanned applications with relatively short engine operations and the engine and stage design were constrained to fit within the payload volume of the then planned space shuttle. The SNRE core design utilized hexagonal fuel elements and hexagonal structural support elements. The total number of elements can be varied to achieve engine designs of higher or lower thrust levels. Some variation in the ratio of fuel elements to structural elements is also possible. Options for SNRE-based engine designs in the 25,000-lbf thrust range were described in a recent (2010) Joint Propulsion Conference paper. The reported designs met or exceeded the performance characteristics baselined in the DRA 5.0 Study. Lower thrust SNRE-based designs were also described in a recent (2011) Joint Propulsion Conference paper. Recent activities have included parallel evaluation and design efforts on fast spectrum engines employing refractory metal alloy fuels. These efforts include evaluation of both heritage designs from the Argonne National Laboratory (ANL) and General Electric Company GE-710 Programs as well as more recent designs. Results are presented for a number of not-yet optimized fast spectrum engine options.

33 ADVANCED PROPULSION SYSTEMS↗

Transmission electron microscopy specimen preparation perpendicular to the long axis of high aspect ratio features

A new variation of transmission electron microscopy (TEM) specimen preparation is introduced. By thinning a tall high aspect ratio structure perpendicular to the long dimension (i.e., from the side) rather than from perpendicular to the short dimension (either the top or the bottom), it is possible to obtain a more uniformly thin TEM specimen over the entire long dimension of the structure. This article will describe the rational for this variation in specimen preparation. The necessary modifications of four different specimen preparation methods (in situ lift-out, traditional H-bar, ex situ lift-out, and tripod polishing) will be discussed and images of specimens obtained by both of these first two methods will be shown. Additional potential advantages and other applications of this specimen preparation method will be covered.

36 MATERIALS SCIENCE↗

Contrast variation in spin-echo small angle neutron scattering

The principle of using contrast variation spin-echo small angle neutron scattering (SESANS) technique for colloidal structural investigation is discussed. Based on the calculations of several model systems, we find that the contrast variation SESANS technique is not sensitive in detecting the structural characteristics of colloidal suspensions consisting of particles with uniform scattering length density profiles. However, its capability of resolving the structural heterogeneity, at both intra- and inter-colloidal length scales, is clearly demonstrated. The prospect of using this new technique to investigate the structural information that is difficult to be probed by other ways is also explored.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗