Search NASA⌕ Search

SEARCH · Search NASA

Results for “bubbles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

An Assessment of the General Applicability of the Relationship Between Nucleation of CO Bubbles and Mass Transfer of Phosphorus in Liquid Iron Alloys

The current paper seeks to demonstrate the general applicability of the authors’ recently developed treatment of surface renewal during decarburization of Fe-C-S alloys and its effect on the mass transport of phosphorus in the metal phase. The proposed model employs a quantitative model of CO bubble nucleation in the metal to predict the rate of surface renewal, which can then in turn be used to predict the mass-transfer coefficient for phosphorus. A model of mixed transport control in the slag and metal phases was employed to investigate the dephosphorization kinetics between a liquid iron alloy and oxidizing slag. Based on previous studies of the mass-transfer coefficient of FeO in the slag, it was possible to separate the mass transfer coefficient of phosphorus in metal phase, k m , from the overall mass-transfer coefficient k o . Using this approach, k m was investigated under a wide range of conditions and shown to be represented reasonably by the mechanism proposed. The mass-transfer model was tested against results from the literature over a wide range of conditions. The analysis showed that the FeO content in the slag, silicon in the metal and the experimental temperature have strong impact on, k m , almost entirely because of their effect on decarburization behavior.

36 MATERIALS SCIENCE↗

Blowing polar skyrmion bubbles in oxide superlattices

Particle-like topological structures such as skyrmions and vortices have garnered ever-increasing interests due to their rich physical insights and potential broad applications in spintronics. Here, in this work, we discover the reversible switching between polar skyrmion bubbles and ordered vortex arrays in ferroelectric superlattices under an electric field, reminiscent of the Plateau-Raleigh instability in fluid mechanics. An electric field phase diagram is constructed, showing a wide stability window for the observed polar skyrmions. A “volcano”-like pontryagin density distribution is formed, indicating the formation of a smooth circular skyrmion. The topological charge Q at different applied field is calculated, verifying the field-driven topological transition between Q = 0 and Q = ±1 states. This study is a demonstration for the computational design of field-induced topological phase transitions, giving promise for the design of next-generation nanoelectronic devices.

36 MATERIALS SCIENCE↗

Effects of 3d electron configurations on helium bubble formation and void swelling in concentrated solid-solution alloys

Currently, elemental specific chemical complexity is known to play a vital role in microstructure development in single-phase concentrated solid-solution alloys (SP-CSAs), including both He bubble formation and irradiation-induced void swelling. While cavity formation and evolution under ion irradiation at elevated temperature are complex nonequilibrium processes, chemical effects are revealed at the level of electrons and atoms herein in a simplified picture, using Ni and a special set of Ni-based SP-CSAs composed of 3d transition metals as model alloys. Based on Ni and the model alloys with minimized variables (e.g., atomic mass, size, and lattice structure), we report on the effects of chemically-biased energy dissipation, defect energetics, sluggish diffusion, and atomic transport on cavity formation and evolution under both self-ion Ni irradiation and He implantation. The observed difference in microstructure evolution is attributed to the effects of d electron interactions in their integrated ability to dissipate radiation energy. The exhibited impact of alloying 3d transition metals with larger differences in the outermost electron counts suggests a simple design strategy for tuning defect properties to improve radiation tolerance in structural alloys.

36 MATERIALS SCIENCE↗

Catalytic fast pyrolysis of bamboo sawdust via a two-step bench scale bubbling fluidized bed/fixed bed reactor: Study on synergistic effect of alkali metal oxides and HZSM-5

Catalytic fast pyrolysis of bamboo sawdust was conducted by a tandem bubbling fluidized bed/fixed bed reactor. Effect of pyrolysis and catalyst temperatures on product yield was studied. In addition, synergistic effect of HZSM-5 and base catalysts (including CaO, MgO, and SrO) for the promotion of aromatic hydrocarbons was revealed. Experimental results illustrated that both pyrolytic and catalytic reactor temperatures played pivotal roles in the yield of bio-oil, and the optimal pyrolysis and catalytic reactor temperatures were 550 °C and 500 °C, respectively. Ex-situ catalytic trial decreased the yield of bio-oil compared to in-situ run, while it facilitated the formation of phenol and alkylphenols. Mixed catalytic upgrading modes exhibited more significant aromatization and deoxygenation activities than sequential ones. In particular, ex-situ run using CaO mixed with HZSM-5 increased the concentration of aromatic hydrocarbons to 31.34%, which was ~11.48% higher than that derived from CaO and HZSM-5 sequentially processed mode. The dominated products in alkylphenols were cresol isomers and ethylphenols, and compared to sequential cases, mixed catalytic upgrading trials promoted the relative selectivity of phenol. Synergistic effect of base catalysts and HZSM-5 contributed to the production of monocyclic aromatic hydrocarbons, and CaO mixed with HZSM-5 mode showed the most prominent synergistic effect for the enhanced relative selectivity to xylenes and toluene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic fast co-pyrolysis of bamboo sawdust and waste tire using a tandem reactor with cascade bubbling fluidized bed and fixed bed system

Catalytic fast co-pyrolysis (co-CFP) of bamboo sawdust and waste tire over HZSM-5 and MgO was conducted using a tandem pyrolysis and upgrading system which consists of a bubbling fluidized bed and a fixed bed reactor. HZSM-5 mixed and sequential with MgO modes were studied to explore the additive effect for the promotion of aromatic hydrocarbons. Experimental results indicated that co-CFP of bamboo sawdust with waste tire over pure HZSM-5 increased the yields of pyrolysis oil and char, while the gas yield decreased with the increasing of waste tire percentage in the feedstock blends. The product distribution of pyrolysis oil obtained from co-CFP of bamboo sawdust and waste tire over pure HZSM-5 was dominated by aromatic hydrocarbons, and the relative concentration increased from 26.71 to 71.50% as the waste tire percentage elevated from 0 to 60 wt%. Co-CFP of bamboo sawdust and waste tire using HZSM-5 mixed with MgO mode produced a higher yield of pyrolysis oil than the sequential mode when HZSM-5/MgO mass ratio was raised from 1:4 to 1:1. However, the sequential mode was proved to be more effective in the promotion of aromatic hydrocarbons than the mixed mode at a higher HZSM-5 proportion. A positive additive effect for alkylbenzenes was found when the sequential mode was used at varying HZSM-5/MgO mass ratios. Regarding the olefins, C10 olefins were main products, and limonene selectivity increased at first and then decreased with the highest selectivity of 38.87% occurring at HZSM-5/MgO of 2:3 in the mixed mode case. In conclusion, the additive effect of HZSM-5 and MgO indicated that both the mixed and sequential modes inhibited the formation of polycyclic aromatic hydrocarbons with the most significant additive effect obtained at HZSM-5/MgO mass ratio of 1:1 using the mixed mode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trapped bubbles keep pumice afloat and gas diffusion makes pumice sink

Pumice can float on water for months to years – long enough for pumice to travel across oceans and facilitate the spread of species. Long-lived pumice floatation is unexpected, however, because pumice pores are highly connected and water wets volcanic glass. As a result, observations of long floating times have not been reconciled with predictions of rapid sinking. We propose a mechanism to resolve this paradox – the trapping of gas bubbles by water within the pumice. Gas trapping refers to the isolation of gas by water within pore throats such that the gas becomes disconnected from the atmosphere and unable to escape. We use X-ray microtomography to image partially saturated pumice and demonstrate that non-condensable gas trapping occurs in both ambient temperature and hot (500 °C) pumice. Furthermore, we show that the size distribution of trapped gas clusters matches predictions of percolation theory. Finally, we propose that diffusion of trapped gas determines pumice floatation time. Experimental measurements of pumice floatation support a diffusion control on pumice buoyancy and we find that floatation time τ scales as τ∝L2Dθ2 where L is the characteristic length of pumice, D is the gas–water diffusion coefficient, and θ is pumice water saturation. A mechanistic understanding of pumice floatation is a step towards understanding how pumice is partitioned into floating and sinking components and provides an estimate for the lifetime of pumice rafts in the ocean.

58 GEOSCIENCES↗

Transformation of char carbon during bubbling fluidized bed gasification of biomass

This study focuses on the fate of carbon in the char generated by devolatilization of biomass during fluidized bed gasification. A carbon balance model was developed to distinguish between char transformed to carbon-bearing gases and its comminution and elutriation as fine char during gasification. The model accurately predicts the transient accumulation of char carbon in the reactor. Experiments revealed steady state reactor char carbon loadings were achieved after multiple hours of gasification. The model formed the basis of an experimental methodology that assesses the transformation of char carbon based on collection of elutriated solids from the reactor and assessment of the steady state char carbon loading in the reactor. Experiments were performed to distinguish the relative contributions of chemical reaction and physical comminution toward conversion of char to gaseous and solid products. The effects of equivalence ratio, gasification temperature, superficial gas velocity, biomass particle size, and the addition of steam on the partitioning of char carbon between gaseous and solid products during gasification of ground seed corn in a bubbling fluidized bed were investigated. This study revealed that char conversion during gasification of biomass was limited by elutriation of fine char particles arising from fragmentation or attrition of primary char product. Additionally, increased chemical reaction of char to form gases was usually accompanied by increased elutriation of fine char, which suggests that chemical reaction increased the porosity of the char and its susceptibility to fragmentation and attrition. Lastly, decreasing superficial gas velocity, increasing equivalence ratio, and decreasing particle size led to increased carbon conversion, while increasing temperature and steam concentration in the reactor had negligible effect.

09 BIOMASS FUELS↗

Simulation of fluid and particles flows: Asymptotic preserving schemes for bubbling and flowing regimes

In this work, we propose asymptotic preserving numerical schemes for the bubbling and flowing regimes of particles immersed in a fluid treated by two-phase flow models. The description comprises compressible Euler equations for the dense phase (fluid) and a kinetic Fokker-Planck equation for the disperse phase (particles) coupled through friction terms. We show numerical simulations in the relevant case of gravity in the one-dimensional case demonstrating the overall behavior of the schemes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A novel elaboration for various morphologies of three-layer TiO2 nanotubes by oxygen bubble mould

Highlights: • Three-layer TiO{sub 2} nanotubes with different morphologies were fabricated. • Some cavities inside middle barrier layer were observed for the first time. • Conventional three-stage current-time curves were transformed into four-stage curves. • Growing process of the three-layer nanotubes was explored systematically. - Abstract: A special three-layer TiO{sub 2} nanotube array has been successfully fabricated. The upper and lower porous layers were formed in the same fluoride-containing electrolyte, while the middle barrier layer was formed in fluoride-free electrolyte. By changing the applied voltage of middle barrier layer, the growth process of the lower layer was explored and compared systematically. The results show that at a critical voltage of barrier layer, the lower layer could barely be seen. Below the critical voltage, complete three-layer TiO{sub 2} nanotubes were achieved, but above the critical voltage, the lower layer failed to appear. Furthermore, some cavities inside the barrier layer were obtained under higher voltage of barrier layer and the conventional three-stage current-time curves were transformed into four-stage curves. Based on the oxygen bubble mould and electronic current model, an explanation for the formation of cavities is firstly proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Uncertainty quantification for Multiphase-CFD simulations of bubbly flows: a machine learning-based Bayesian approach supported by high-resolution experiments

In this paper, we developed a machine learning-based Bayesian approach to inversely quantify and reduce the uncertainties of multiphase computational fluid dynamics (MCFD) simulations for bubbly flows. The proposed approach is supported by high-resolution two-phase flow measurements, including those by double-sensor conductivity probes, high-speed imaging, and particle image velocimetry. Local distributions of key physical quantities of interest (QoIs), including the void fraction and phasic velocities, are obtained to support the Bayesian inference. In the process, the epistemic uncertainties of the closure relations are inversely quantified while the aleatory uncertainties from stochastic fluctuations of the system are evaluated based on experimental uncertainty analysis. The combined uncertainties are then propagated through the MCFD solver to obtain uncertainties of the QoIs, based on which probability-boxes are constructed for validation. The proposed approach relies on three machine learning methods: feedforward neural networks and principal component analysis for surrogate modeling, and Gaussian processes for model form uncertainty modeling. The whole process is implemented within the framework of an open-source deep learning library PyTorch with graphics processing unit (GPU) acceleration, thus ensuring the efficiency of the computation. The results demonstrate that with the support of high-resolution data, the uncertainties of MCFD simulations can be significantly reduced. The proposed approach has the potential for other applications that involve numerical models with empirical parameters.

42 ENGINEERING↗

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

Highlights: • Film waste from packaging is a common waste, a fraction of which is not recyclable. • Gasification can make use of the high energy value of the non-recyclable fraction. • This waste and two reference polymers were gasified in a bubbling bed reactor. • This experimental research proves technical feasibility of the process. • It also analyzes impact of composition and ER on the performance of the plant. - Abstract: The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m{sup 3} and cold gas efficiencies up to 60%.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

New approach to understanding NO emission during bubbling fluidized bed coal combustion: separation of NO formation and reduction processes in the bed

A new approach for separately evaluating NO formation and NO reduction during coal combustion in a fluidized bed was investigated. Sixteen different coals were burned in a laboratory-scale bubbling fluidized bed combustor with three different char loadings, which were established by changing the inlet oxygen concentrations. NO conversion ratios (X{sub NO} = the ratio of the mass of N atoms in the emitted NO to the mass of N atoms in the coal) were determined for the coals, and then 'ultimate NO conversion ratios' (X{sub NO}*) were obtained by extrapolation of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate to an O{sub 2} consumption rate of zero. The X{sub NO}* values correspond to the values that would be obtained for a single coal particle burning in the absence of char particles. Using this technique, the contribution of char particles to NO reduction was evaluated. The X{sub NO}* values depended on the N content and the O/N molar ratio of the coals. The bed temperature dependences of the sensitivity values (the slopes of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate), which include the contribution of NO reduction by char particles, differed substantially for the different coals. However, char loading had no clear effect on N{sub 2}O emission. This result suggests that the reduction by the char particles involves the competitive reaction of NO and N{sub 2}O, and the effect of the N{sub 2}O reduction by burning char particles was less than NO reduction. Our results indicate the importance of taking into account the effects of NO reduction by char particles on overall NOx emissions during fluidized bed combustion of coal. 19 refs., 14 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Bubbling Reactor Technology for Rapid Synthesis of Uniform, Small MFI-Type Zeolite Crystals

MFI-type zeolite is an important family of materials used in today’s industries as catalysts and adsorbents. Preparation of this type of zeolite material as uniform and pure crystals of sizes from tens of nanometer to hundreds of nanometer are not only desired by current catalytic and adsorption processes for enhanced reaction kinetics and/or selectivity, but also much needed by some new applications, such as CO2 capture adsorbents and composite materials. However, it has been a major challenge in the zeolite synthesis field to prepare small crystals of MFI-type zeolite over a range of Si/Al ratio with very high throughput. In this work, a gas-bubbling flow reactor is used to conduct hydrothermal growth of the zeolite crystals with controllable Si/Al ratio and crystal sizes. Distinctive, uniform ZSM-5 crystals are successfully synthesized within two hours of reaction time, exceptionally short compared to the conventional synthesis process. The crystals are small enough to form a stable milk-like suspension in water. The Si/Al ratio can be controlled by adjusting the growth solution composition and reaction conditions over a range from about 9 to infinity. Characterization by SEM/EDS, XRD, TEM, N2 adsorption/desorption, and NMR confirms ZSM-5 crystal structures and reveals presence of meso-porosity in the resulting crystals.

36 MATERIALS SCIENCE↗

A Random Walk Model for Biomass Particle Mixing in Bubbling Fluidized Beds

We propose a physically motivated random walk model to describe the spatial and temporal mixing of a single biomass particle in a bubbling fluidized bed. The model parameters are estimated from measurements of a magnetically tagged simulated biomass particle in a laboratory fluidized bed. We demonstrate that Monte Carlo simulations using the model match key statistical features of the observed behavior reasonably well. These results suggest that a model of this type can simulate the effects of biomass particle mixing in biomass conversion reactors. We suggest possible improvements to the random walk model and propose how it might be used in conjunction with computational fluid dynamics simulations.

09 BIOMASS FUELS↗

Target preference of Type III-A CRISPR-Cas complexes at the transcription bubble

Type III-A CRISPR-Cas systems are prokaryotic RNA-guided adaptive immune systems that use a protein-RNA complex, Csm, for transcription-dependent immunity against foreign DNA. Csm can cleave RNA and single-stranded DNA (ssDNA), but whether it targets one or both nucleic acids during transcription elongation is unknown. Here, we show that binding of a Thermus thermophilus ( T. thermophilus ) Csm (TthCsm) to a nascent transcript in a transcription elongation complex (TEC) promotes tethering but not direct contact of TthCsm with RNA polymerase (RNAP). Biochemical experiments show that both TthCsm and Staphylococcus epidermidis ( S. epidermidis ) Csm (SepCsm) cleave RNA transcripts, but not ssDNA, at the transcription bubble. Taken together, these results suggest that Type III systems primarily target transcripts, instead of unwound ssDNA in TECs, for immunity against double-stranded DNA (dsDNA) phages and plasmids. This reveals similarities between Csm and eukaryotic RNA interference, which also uses RNA-guided RNA targeting to silence actively transcribed genes.

59 BASIC BIOLOGICAL SCIENCES↗

The cell cycle-regulated DNA adenine methyltransferase CcrM opens a bubble at its DNA recognition site

The Caulobacter crescentus cell cycle-regulated DNA methyltransferase (CcrM) methylates the adenine of hemimethylated GANTC after replication. Here we present the structure of CcrM in complex with double-stranded DNA containing the recognition sequence. CcrM contains an N-terminal methyltransferase domain and a C-terminal nonspecific DNA-binding domain. CcrM is a dimer, with each monomer contacting primarily one DNA strand: the methyltransferase domain of one molecule binds the target strand, recognizes the target sequence, and catalyzes methyl transfer, while the C-terminal domain of the second molecule binds the non-target strand. The DNA contacts at the 5-base pair recognition site results in dramatic DNA distortions including bending, unwinding and base flipping. The two DNA strands are pulled apart, creating a bubble comprising four recognized base pairs. The five bases of the target strand are recognized meticulously by stacking contacts, van der Waals interactions and specific Watson–Crick polar hydrogen bonds to ensure high enzymatic specificity.

59 BASIC BIOLOGICAL SCIENCES↗

Bubbles enable volumetric negative compressibility in metastable elastocapillary systems

Although coveted in applications, few materials expand when subject to compression or contract under decompression, i.e., exhibit negative compressibility. A key step to achieve such counterintuitive behaviour is the destabilisations of (meta)stable equilibria of the constituents. Here, we propose a simple strategy to obtain negative compressibility exploiting capillary forces both to precompress the elastic material and to release such precompression by a threshold phenomenon – the reversible formation of a bubble in a hydrophobic flexible cavity. We demonstrate that the solid part of such metastable elastocapillary systems displays negative compressibility across different scales: hydrophobic microporous materials, proteins, and millimetre-sized laminae. This concept is applicable to fields such as porous materials, biomolecules, sensors and may be easily extended to create unexpected material susceptibilities.

36 MATERIALS SCIENCE↗

Transverse oscillating bubble enhanced laser-driven betatron X-ray radiation generation

Abstract Ultrafast high-brightness X-ray pulses have proven invaluable for a broad range of research. Such pulses are typically generated via synchrotron emission from relativistic electron bunches using large-scale facilities. Recently, significantly more compact X-ray sources based on laser-wakefield accelerated (LWFA) electron beams have been demonstrated. In particular, laser-driven sources, where the radiation is generated by transverse oscillations of electrons within the plasma accelerator structure (so-called betatron oscillations) can generate highly-brilliant ultrashort X-ray pulses using a comparably simple setup. Here, we experimentally demonstrate a method to markedly enhance the parameters of LWFA-driven betatron X-ray emission in a proof-of-principle experiment. We show a significant increase in the number of generated photons by specifically manipulating the amplitude of the betatron oscillations by using our novel Transverse Oscillating Bubble Enhanced Betatron Radiation scheme. We realize this through an orchestrated evolution of the temporal laser pulse shape and the accelerating plasma structure. This leads to controlled off-axis injection of electrons that perform large-amplitude collective transverse betatron oscillations, resulting in increased radiation emission. Our concept holds the promise for a method to optimize the X-ray parameters for specific applications, such as time-resolved investigations with spatial and temporal atomic resolution or advanced high-resolution imaging modalities, and the generation of X-ray beams with even higher peak and average brightness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗