Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

High quality large scale single and multilayer graphene production by chemical vapor deposition

Systems and methods for synthesizing continuous graphene sheets are provided. The systems and methods include passing a catalyst substrate through a heated chemical vapor deposition chamber and exposing the substrate to a reaction gas mixture of hydrogen and hydrocarbon at a preselected location within the chamber. The reaction gas mixture can include hydrogen having a partial pressure of between about 0 Torr and 20 Torr, hydrocarbon having a partial pressure of between about 20 mTorr and about 10 Torr, and one or more buffer gases. The buffer gases can include argon or other noble gases to maintain atmospheric pressure within the chemical deposition chamber. The resulting graphene can be made with continuous mono and multilayers (up to six layers) and have single crystalline hexagonal grains with a preselected nucleation density and domain size for a range of applications.

Vlassiouk, Ivan V.↗

Broadband light sources based on InAs/InGaAs metamorphic quantum dots

We propose a design for a semiconductor structure emitting broadband light in the infrared, based on InAs quantum dots (QDs) embedded into a metamorphic step-graded In{sub x}Ga{sub 1−x}As buffer. We developed a model to calculate the metamorphic QD energy levels based on the realistic QD parameters and on the strain-dependent material properties; we validated the results of simulations by comparison with the experimental values. On this basis, we designed a p-i-n heterostructure with a graded index profile toward the realization of an electrically pumped guided wave device. This has been done by adding layers where QDs are embedded in In{sub x}Al{sub y}Ga{sub 1−x−y}As layers, to obtain a symmetric structure from a band profile point of view. To assess the room temperature electro-luminescence emission spectrum under realistic electrical injection conditions, we performed device-level simulations based on a coupled drift-diffusion and QD rate equation model. On the basis of the device simulation results, we conclude that the present proposal is a viable option to realize broadband light-emitting devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stable Pentagonal Layered Palladium Diselenide Enables Rapid Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H 2 O 2 ) via the two-electron oxygen reduction reaction (2e – ORR) is promising for various practical applications, such as wastewater treatment. However, few electrocatalysts are active and selective for 2e – ORR yet are also resistant to catalyst leaching under realistic operating conditions. Here, a joint experimental and computational study reveals active and stable 2e – ORR catalysis in neutral media over layered PdSe 2 with a unique pentagonal puckered ring structure type. Computations predict active and selective 2e – ORR on the basal plane and edge of PdSe 2 , but with distinct kinetic behaviors. Further, electrochemical measurements of hydrothermally synthesized PdSe 2 nanoplates show a higher 2e – ORR activity than other Pd–Se compounds (Pd 4 Se and Pd 17 Se 15 ). PdSe 2 on a gas diffusion electrode can rapidly accumulate H 2 O 2 in buffered neutral solution under a high current density. The electrochemical stability of PdSe 2 is further confirmed by long device operational stability, elemental analysis of the catalyst and electrolyte, and synchrotron X-ray absorption spectroscopy. This work establishes a new efficient and stable 2e – ORR catalyst at practical current densities and opens catalyst designs utilizing the unique layered pentagonal structure motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biaxially textured cobalt-doped BaFe{sub 2}As{sub 2} films with high critical current density over 1 MA/cm{sup 2} on MgO-buffered metal-tape flexible substrates

High critical current densities (J{sub c})>1 MA/cm{sup 2} were realized in cobalt-doped BaFe{sub 2}As{sub 2} (BaFe{sub 2}As{sub 2}:Co) films on flexible metal substrates with biaxially textured MgO base-layers fabricated by an ion-beam assisted deposition technique. The BaFe{sub 2}As{sub 2}:Co films showed small in-plane crystalline misorientations ({Delta}{phi}{sub BaFe2As2:Co}) of {approx}3 deg. regardless of twice larger misorientations of the MgO base-layers ({Delta}{phi}{sub MgO}=7.3 deg.), and exhibited high self-field J{sub c} up to 3.5 MA/cm{sup 2} at 2 K. These values are comparable to that on MgO single crystals and the highest J{sub c} among iron pnictide superconducting tapes and wires ever reported. High in-field J{sub c} suggests the existence of c-axis correlated vortex pinning centers.

36 MATERIALS SCIENCE↗

CONSTRAINED EVOLUTION OF A RADIALLY MAGNETIZED PROTOPLANETARY DISK: IMPLICATIONS FOR PLANETARY MIGRATION

We consider the inner ∼1 AU of a protoplanetary disk (PPD) at a stage where angular momentum transport is driven by the mixing of a radial magnetic field into the disk from a T Tauri wind. Because the radial profile of the imposed magnetic field is well constrained, a constrained calculation of the disk mass flow becomes possible. The vertical disk profiles obtained in Paper I imply a stronger magnetization in the inner disk, faster accretion, and a secular depletion of the disk material. Inward transport of solids allows the disk to maintain a broad optical absorption layer even when the grain abundance becomes too small to suppress its ionization. Thus, a PPD may show a strong mid- to near-infrared spectral excess even while its mass profile departs radically from the minimum-mass solar nebula. The disk surface density is buffered at ∼30 g cm{sup −2}; below this, X-rays trigger magnetorotational turbulence at the midplane strong enough to loft millimeter- to centimeter-sized particles high in the disk, followed by catastrophic fragmentation. A sharp density gradient bounds the inner depleted disk and propagates outward to ∼1–2 AU over a few megayears. Earth-mass planets migrate through the inner disk over a similar timescale, whereas the migration of Jupiters is limited by the supply of gas. Gas-mediated migration must stall outside 0.04 AU, where silicates are sublimated and the disk shifts to a much lower column. A transition disk emerges when the dust/gas ratio in the MRI-active layer falls below X{sub d} ∼ 10{sup −6} (a{sub d}/μm), where a{sub d} is the grain size.

79 ASTRONOMY AND ASTROPHYSICS↗

Thickness and Clapeyron slope of the post-perovskite boundary

The thicknesses and Clapeyron slopes of mantle phase boundaries strongly influence the seismic detectability of the boundaries and convection in the mantle. The unusually large positive Clapeyron slope found for the boundary between perovskite (Pv) and post-perovskite (pPv) (the 'pPv boundary') would destabilize high-temperature anomalies in the lowermost mantle, in disagreement with the seismic observations. Here we report the thickness of the pPv boundary in (Mg{sub 0.91}Fe{sub 0.09}{sup 2+})SiO{sub 3} and (Mg{sub 0.9}Fe{sub 0.1}{sup 3+})(Al{sub 0.1}Si{sub 0.9})O{sub 3} as determined in a laser-heated diamond-anvil cell under in situ high-pressure (up to 145 GPa), high-temperature (up to 3,000 K) conditions. The measured Clapeyron slope is consistent with the D'' discontinuity. In both systems, however, the pPv boundary thickness increases to 400-600 {+-} 100 km, which is substantially greater than the thickness of the D'' discontinuity (<30 km). Although the Fe{sup 2+} buffering effect of ferropericlase could decrease the pPv boundary thickness, the boundary may remain thick in a pyrolitic composition because of the effects of Al and the rapid temperature increase in the D'' layer. The pPv boundary would be particularly thick in regions with an elevated Al content and/or a low Mg/Si ratio, reducing the effects of the large positive Clapeyron slope on the buoyancy of thermal anomalies and stabilizing compositional heterogeneities in the lowermost mantle. If the pPv transition is the source of the D'' discontinuity, regions with sharp discontinuities may require distinct compositions, such as a higher Mg/Si ratio or a lower Al content.

58 GEOSCIENCES↗

Novel Chalcopyrites for Advanced Photoelectrochemical Water Splitting

With the support of DoE’s EERE office, our team has established a unique tool-chest of capabilities, including theoretical modeling (Lawrence Livermore National Laboratory: LLNL), state-of-the-art synthesis (Hawaii Natural Energy Institute: HNEI, Stanford, and the National Renewable Energy Laboratory: NREL) and advanced materials and interfaces characterization (University of Nevada, Las Vegas: UNLV, and Lawrence Berkeley National Laboratory: LBNL), to accelerate the development of high efficiency and durable chalcopyrite materials for advanced photoelectrochemical (PEC) water splitting. Using this synergistic approach, we have successfully created new wide bandgap chalcopyrite photocathodes generating over 10 mA/cm 2 , developed innovative strategies to protect them from corrosion, and engineered novel integration methods to circumvent thin film materials mechanical, chemical and thermal incompatibility. In Task 1 “Modeling and synthesis of chalcopyrite photocathodes”, we expanded our library of wide bandgap chalcopyrites for PEC water splitting. With support from LLNL’s “Computational Materials Diagnostics and Optimization of PEC Devices”, LBNL’s “photophysical” and NREL’s “I-III-VI Compound Semiconductors for Water-Splitting” nodes, we investigated two new chalcopyrite candidates for PEC water splitting: Cu(In,Al)Se 2 and Cu(In,B)Se 2 . We also further developed ordered vacancy compounds, such as CuGa 3 Se 5 , with unprecedented durability during PEC waters splitting in acidic solutions. In Task 2 “Interfaces engineering for enhanced efficiency and durability”, we addressed both the non-ideal band-edge positions of chalcopyrites with respect to water redox potentials, as well as their chemical instability under PEC water splitting, with a buried-junctions approach. With help from NREL’s “High-Throughput Experimental Thin Film Combinatorial Capabilities” and “Corrosion Analysis of Materials” nodes, we engineered environmentally friendly n-type buffers, including Mn x Zn 1-x O, to adjust the chalcopyrite band-edge positions and achieved photovoltages as high as 925 mV. Also, we integrated non-precious catalytic-protecting layers, such as WO 3 , to enhance the water splitting long-term stability of chalcopyrite absorbers. Finally, in Task 3 “Hybrid photoelectrode device integration”, we proposed an innovative method to bond wide bandgap photocathodes onto narrow bandgap PV drivers at room temperature using conductive polymers. Our semi-monolithic approach addressed fundamental processing incompatibility issues, as both the photocathode and the PV driver are processed separately. Proof-of-concept whole-chalcopyrite tandems were obtained by consecutive exfoliation and transfer of fully integrated 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 stacks from their Mo/SLG substrates onto a new single FTO host substrate.

08 HYDROGEN↗

Chemical Sensor Development and Antibacterial Activities Based on Polyaniline/Gemini Surfactants for Environmental Safety

The polyaniline doped novel anionic gemini surfactant (PANI/GS) was chemically synthesized by a micellar polymerization process and then characterized in details by X-ray powder diffractometry, scanning electron microscopy, and FTIR spectroscopy. The results show the presence of polyaniline in the emeraldine base was formed by doping with gemini surfactant. The thermal properties of the composites were studied by carrying out thermal gravimetric analysis. The PANI/GS were found to be soluble in common organic solvents such as chloroform as well as DMSO. The antibacterial activity of the obtained PANI/GS was also evaluated against Gram positive bacteria Bacillus subtilis, Gram negative bacteria Escherichia coli and antibiotics (Amoxicillin) using the agar plate. The antibacterial study showed that the PANI/GS was found to be most effective against both B. subtilis and E. coli respectively which was significant compared to the amoxicillin. Beside that thin-layer of PANI/GS onto glassy carbon electrode (GCE) was fabricated with conducting 5% nafion coating agents to fabricate a sensitive and selective Cd{sup 2+} ionsic sensor in short response time into the phosphate buffer phase. The fabricated cationic-sensor was exhibited higher sensitivity, large-dynamic concentration ranges, long-term stability, and improved electrochemical performances towards Cd{sup 2+} ions. The calibration plot is linear (r{sup 2}, 0.9799) over the large Cd{sup 2+} concentration ranges (10.0 nM–1.0 mM). The sensitivity and detection limit is calculated as 2.324 µA µM{sup −1}cm{sup −2} and 6.85 nM (signal-to-noise ratio, at a SNR of 3) respectively. These novel efforts are intiated a well-known method for significant cationic sensor development with directly fabricated nanocomposite onto GCE for the detection of hazardous toxins in ecological and environmental fields in huge scales. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Composition and strain in thin Si{sub 1-x}Ge{sub x} virtual substrates measured by micro-Raman spectroscopy and x-ray diffraction

Micro-Raman spectroscopy was employed for the determination of the germanium content, x and strain, {epsilon}, in ultrathin SiGe virtual substrates grown directly on Si by molecular beam epitaxy. The growth of highly relaxed SiGe layers was achieved by the introduction of point defects at a very low temperature during the initial stage of growth. SiGe virtual substrates with thicknesses in the range 40-200 nm with a high Ge content (up to 50%) and degree of relaxation, r, in the range 20%-100% were investigated using micro-Raman spectroscopy and x-ray diffraction (XRD) techniques. The Ge content, x, and strain, {epsilon}, were estimated from equations describing Si-Si, Si-Ge, and Ge-Ge Raman vibrational modes, modified in this study for application to thin SiGe layers. The alteration of the experimentally derived equations from previous studies was performed using independent data for x and r obtained from XRD reciprocal space maps. A number of samples consisting of a strained-silicon (s-Si) layer deposited on a SiGe virtual substrate were also analyzed. The stress value for the s-Si varied from 0.54 to 2.75 GPa, depending on the Ge-content in the virtual substrates. These results are in good agreement with theoretically predicted values.

36 MATERIALS SCIENCE↗

All-in-One Derivatized Tandem p + n-Silicon–SnO 2 /TiO 2 Water Splitting Photoelectrochemical Cell

Mesoporous metal oxide film electrodes consisting of derivatized 5.5 μm thick SnO 2 films with an outer 4.3 nm shell of TiO 2 added by atomic layer deposition (ALD) have been investigated to explore unbiased water splitting on p, n, and p + n type silicon substrates. Modified electrodes were derivatized by addition of the water oxidation catalyst, [Ru(bda)(4-O(CH 2 ) 3 PO 3 H 2 )-pyr) 2 ], 1, (pyr = pyridine; bda = 2,2'-bipyridine-6,6'-dicarboxylate), and chromophore, [Ru(4,4'-PO 3 H 2 -bpy) (bpy) 2 ] 2+ , RuP2+, (bpy = 2,2'-bipyridine), which form 2:1 RuP 2+ /1 assemblies on the surface. At pH 5.7 in 0.1 M acetate buffer, these electrodes with a fluorine-doped tin oxide (FTO) back contact under ~1 sun illumination (100 mW/cm 2 ; white light source) perform efficient water oxidation with a photocurrent of 1.5 mA/cm2 with an 88% Faradaic efficiency (FE) for O 2 production at an applied bias of 600 mV versus RHE ( ACS Energy Lett., 2016, 1, 231-236). The SnO 2 /TiO 2 –chromophore–catalyst assembly was integrated with the Si electrodes by a thin layer of titanium followed by an amorphous TiO 2 (Ti/a-TiO 2 ) coating as an interconnect. In the integrated electrode, p + n-Si–Ti/a-TiO 2 –SnO2/TiO 2 |-2RuP 2+ /1, the p+n-Si junction provided about 350 mV in added potential to the half cell. In photolysis experiments at pH 5.7 in 0.1 M acetate buffer, bias-free photocurrents approaching 100 μA/cm 2 were obtained for water splitting, 2H 2 O → 2H 2 + O 2 . The FE for water oxidation was 79% with a hydrogen efficiency of ~100% at the Pt cathode.

14 SOLAR ENERGY↗

Electrolyte-phobic Surface for the Next-Generation Nanostructured Battery Electrodes

Nanostructured electrodes are among the most important candidates rationally designed to enable high capacity battery chemistry. Nanostructures can solve issues such as the volume change and mechanical fragmentations. However, the high surface area they usually possess would decrease the Coulombic efficiencies, since the side chemical reactions scale with surface area. Moreover, electrodes comprised of nanomaterials have significant intakes of liquid electrolytes, which reduces the overall energy density and increases the cost of the battery. Here we present a new strategy of limiting effective surface area by introducing an “electrolyte-phobic surface”. In this study, a porous Si anode functions as a model material to demonstrate this concept. Silicon boasts high theoretical capacity, but experiences large volume change during its lithiation and delithiation processes. Porous Si can address this volume change problem with the buffer effect of its inner pores. However, porous silicon shows low initial Coulombic efficiencies and high irreversible lithium loss, owing to its intrinsic high surface area. In this report, a covalently linked perfluorinated surface coating layer on porous Si particles serves as an electrolyte-phobic protection layer, minimizing the accessible surface area for the electrolytes, decreasing the side reactions between the electrolyte and Si surface, and thus significantly enhancing the initial Coulombic efficiencies, up to ~88% compared to ~60% for the pristine porous silicon. Meanwhile, the electrolyte-phobic protection layer of Si particles keeps the silicon surface compatible with the conventional polyvinylidene fluoride (PVDF) binder, which helps to stabilize the Si electrode for long-term battery cycling.

Qian, Chenxi↗

Magnetic nanotubes

A magnetic nanotube includes bacterial magnetic nanocrystals contacted onto a nanotube which absorbs the nanocrystals. The nanocrystals are contacted on at least one surface of the nanotube. A method of fabricating a magnetic nanotube includes synthesizing the bacterial magnetic nanocrystals, which have an outer layer of proteins. A nanotube provided is capable of absorbing the nanocrystals and contacting the nanotube with the nanocrystals. The nanotube is preferably a peptide bolaamphiphile. A nanotube solution and a nanocrystal solution including a buffer and a concentration of nanocrystals are mixed. The concentration of nanocrystals is optimized, resulting in a nanocrystal to nanotube ratio for which bacterial magnetic nanocrystals are immobilized on at least one surface of the nanotubes. The ratio controls whether the nanocrystals bind only to the interior or to the exterior surfaces of the nanotubes. Uses include cell manipulation and separation, biological assay, enzyme recovery, and biosensors.

Matsui, Hiroshi↗

Non-destructive assessment of the polarity of GaN nanowire ensembles using low-energy electron diffraction and x-ray photoelectron diffraction

We investigate GaN nanowire ensembles spontaneously formed in plasma-assisted molecular beam epitaxy by non-destructive low-energy electron diffraction (LEED) and x-ray photoelectron diffraction (XPD). We show that GaN nanowire ensembles prepared on AlN-buffered 6H-SiC(0001{sup ¯}) substrates with well-defined N polarity exhibit similar LEED intensity-voltage curves and angular distribution of photo-emitted electrons as N-polar free-standing GaN layers. Therefore, as in the case of GaN layers, LEED and XPD are found to be suitable techniques to assess the polarity of GaN nanowire ensembles on a macroscopic scale. The analysis of GaN nanowire ensembles prepared on bare Si(111) allows us to conclude that, on this non-polar substrate, the majority of nanowires is also N-polar.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of surface preparation on low temperature HfO{sub 2} ALD on InGaAs (001) and (110) surfaces

Current logic devices rely on 3D architectures, such as the tri-gate field effect transistor (finFET), which utilize the (001) and (110) crystal faces simultaneously thus requiring passivation methods for the (110) face in order to ensure a pristine 3D surface prior to further processing. Scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), and correlated electrical measurement on MOSCAPs were utilized to compare the effects of a previously developed in situ pre-atomic layer deposition (ALD) surface clean on the InGaAs (001) and (110) surfaces. Ex situ wet cleans are very effective on the (001) surface but not the (110) surface. Capacitance voltage indicated the (001) surface with no buffered oxide etch had a higher C{sub max} hypothesized to be a result of poor nucleation of HfO{sub 2} on the native oxide. An in situ pre-ALD surface clean employing both atomic H and trimethylaluminum (TMA) pre-pulsing, developed by Chobpattana et al. and Carter et al. for the (001) surface, was demonstrated to be effective on the (110) surface for producing low D{sub it} high C{sub ox} MOSCAPs. Including TMA in the pre-ALD surface clean resulted in reduction of the magnitude of the interface state capacitance. The XPS studies show the role of atomic H pre-pulsing is to remove both carbon and oxygen while STM shows the role of TMA pre-pulsing is to eliminate H induced etching. Devices fabricated at 120 °C and 300 °C were compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enzyme-based CO2 capture for advanced life support

Elevated CO2 levels in air can lead to impaired functioning and even death to humans. Control of CO2 is critical in confined spaces that have little physical or biological buffering capacity (e.g., spacecraft, submarines, or aircraft). A novel enzyme-based contained liquid membrane bioreactor was designed for CO2 capture and certain application cases are reported in this article. The results show that the liquid layer accounts for the major transport resistance. With addition of carbonic anhydrase, the transport resistance decreased by 71%. Volatile organic compounds of the type and concentration expected to be present in either the crew cabin or a plant growth chamber did not influence carbonic anhydrase activity or reactor operation during 1-day operation. Alternative sweep method studies, examined as a means of eliminating consumables, showed that the feed gas could be used successfully in a bypass mode when combined with medium vacuum pressure (-85 kPa) to achieve CO2 separation comparable to that with an inert sweep gas. The reactor exhibited a selectivity for CO2 versus N2 of 1400:1 and CO2 versus O2 is 866:1. The CO2 permeance was 1.44 x 10(-7) mol m-2 Pa-1 s-1 (4.3 x 10(-4) cm3 cm-2 s-1 cmHg-1) at a feed concentration of 0.1% CO2. These data show that the enzyme-based contained liquid membrane is a promising candidate technology that may be suitable for NASA applications to control CO2 in the crew or plant chambers.

NASA Discipline Life Support Systems↗

Synthesis and structural characterization of Al{sub 4}Si{sub 2}C{sub 5}-homeotypic aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6)

We have prepared a new layered oxycarbide, [Al{sub 5.25(5)}Si{sub 0.75(5)}][O{sub 1.60(7)}C{sub 3.40(7)}], by isothermal heating of (Al{sub 4.4}Si{sub 0.6})(O{sub 1.0}C{sub 3.0}) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm{sup 3}. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R{sub wp}=4.45% (S=1.30), R{sub p}=3.48%, R{sub B}=2.27% and R{sub F}=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3-bar m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m. - Graphical Abstract: A new aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6). The crystal is composed of three types of domains (I, II and III), and hence the structure is represented by a split-atom model. Individual crystal structures can be regarded as layered structures, which consist of A-type [(Al,Si){sub 4}(O,C){sub 4}] unit layers and B-type [(Al,Si)(O,C){sub 2}] single layers.

36 MATERIALS SCIENCE↗

Toward lower-diameter large-scale HPC and data center networks with co-packaged optics

We investigate the advantages of using co-packaged optics for building low-diameter, large-scale high-performance computing (HPC) and data center networks. The increased escape bandwidth offered by co-packaged optics can enable high-radix switch implementations of more than 150 switch ports, which can be combined with data rates of up to 400 Gb/s per port. From the network architecture perspective, the key benefits of using co-packaged optics in future fat-tree networks include (a) the ability to implement large-scale topologies of > <#comment/> 11 , 000 end points by eliminating the need for a third switching layer and (b) the ability to provide up to 4 × <#comment/> higher bisection bandwidth compared to existing solutions, reducing at the same time the number of required switch application-specific integrated circuits by > <#comment/> 80 % <#comment/> . From the network operation perspective, both reduced energy consumption and lower packet delays can be achieved since fewer hops are required; i.e., packets need to traverse fewer serializer/deserializer lanes and fewer switch buffers, which reduces the probability of contending with other packets and improves the tolerance of network congestion. The performance of the proposed architecture is evaluated via discrete-event simulations for a wide range of representative HPC synthetic-traffic cases that include both hotspot and non-hotspot scenarios. The simulation results suggest that co-packaged optics form a promising solution to keep up with bandwidth scaling in future networks, while the reduced number of switching layers can lead to significant mean packet delay improvements that start from 30% and reach up to 74% for high-load conditions.

Maniotis, Pavlos (ORCID:0000000244905253)↗

Machine learning enabled acoustic detection of sub-nanomolar concentration of trypsin and plasmin in solution

Here, we demonstrate a machine learning enabled low-cost acoustic detection of protease which may find application in assuring quality and safety of dairy products, drug screening, molecular profiling, and disease diagnostics. A hydrophilic SiO 2 -coated quartz crystal microbalance (QCM) acts as a substrate to assemble α-, β-, and κ-casein layers (protease reporters) and as a transducer for measuring changes in frequency as casein is removed by protease. We demonstrate that α-, β-, and κ-caseins can form stable assembly on SiO 2 from phosphate-buffered solution (PBS) solution. Exposure to protease results in cleaving of casein which changes the frequency of the 1st–11th odd harmonics of QCM. Monitoring β-casein cleavage allows ~0.2 nM detection of trypsin and ~0.5 nM detection of plasmin and enables differentiation between trypsin and plasmin after <2 min of protease exposure. The casein-coated QCM allows sub-nanomolar detection and classification of protease.

47 OTHER INSTRUMENTATION↗