SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The sources of radar backscattering sources in vegetation canopies and surface targets were determined. The fundamental questions were, how much of backscattering is due to direct volume backscatter by the canopy, the soil, and indirect backscatter by soil/vegetation, and what are the relative roles in terms of scattering. The results for crops, milo plant, wheat plant, soybean plant, and surface targets are reported.
This paper examines the relationship between the microwave backscattering coefficient of a vegetation canopy, sigma (can, 0) and the canopy's leaf area index (LAI). The relationship is established through the development of one model for corn and sorghum and another for wheat. Both models are extensions of the cloud model of Attema and Ulaby (1978). Analysis of experimental data measured at 8.6, 13.0, 17.0, and 35.6 GHz indicates that most of the temporal variations of sigma (can, 0) can be accounted for through variations in green LAI alone, if the latter is greater than 0.5.
Wind-tunnel tests have been made of 1/4-scale and 1/2-scale models of the Galileo Probe conical ribbon-parachute at flight conditions. For the Galileo mission, the parachute is deployed behind a blunt shape at transonic speed. The investigation was initiated to verify the solutions to the delayed main-parachute opening with squidding that was observed in the 1982 Galileo Probe system balloon drop test. In addition to varying model scale, the forebody shape, angle of attack, dynamic pressure, Mach number, and canopy trailing distance behind the forebody were varied to determine their effect on parachute performance. Both steady-state and deployment tests were conducted. Parachute drag was measured and was seen to degrade severely at canopy trailing distances of 5.5 and 7 forebody diameters. Performance was shown to be good at the trailing distances of 9 and 11 diameters. A second balloon drop test demonstrated the desired parachute performance at the system level.
Three waveguide transmission systems covering the 1-2, 3.5-6.5, and 7.5-8.5 GHZ bands were used to measure the dielectric properties of vegetation material as a function of moisture content and microwave frequency. The materials measured included, primarily, the leaves and stalks of corn and wheat. Dielectric measurements also were made of the liquid included in the vegetation material after it was extracted from the vegetation by mechanical means. The extracted liquids were found to have an equivalent NaCl salinity of about 10 per mil, which can have a significant effect on the dielectric loss at frequencies below 5 GHz. The results of attempts to model the dielectric constant of the vegetatioon-water mixture in terms of the dielectric constants and volume fractions of its constituent parts (i.e., bulk vegetation, air, bound water, and free water) are discussed. Additionally, measurements of the temporal variations in the total attenuation at 10.2 GHz are presented for a corn canopy and a soybean canopy.
The potential of short wave infrared (SWIR) measurements in vegetation discrimination is further substantiated through a discussion of field studies and an examination of the physical bases which cause SWIR measurements to vary with the vegetation type observed. The research reported herein supported the AGRISTARS program objective to incorporate TM measurements in the analysis of agricultural activity. Field measurements on corn and soybeans in Iowa were conducted, and the mean and variance of canopy reflectance were computed for each observation date. The Suits canopy reflectance model was used to evaluate possible explanations of the observed corn/soybeans reflectance patterns /39/. The SWIR measurements were shown to effectively discriminate corn and soybeans on the basis of leaf absorption properties.
Radar engineers have used several polarization combinations (HH, HV, VV, and/or VH) in the design of radar imagers and scatterometers for remote sensing research and applications. Scientists have explored their use for vegetation identification, mapping, and canopy condition assessment. In some cases, one polarization combination or another has produced good results; however, the results have not been consistent. In this paper, the use of polarized radar measurements is considered for vegetation studies on a theoretical basis to define ways of isolating parameters related to canopy structure and composition in the presence of backscattering from the underlying surface. It is found that scientists should use all three polarization combinations (VV, HH, and VH or HV) and their ratios.
Techniques for the determination of leaf area index or leaf angle distribution from remote-sensing canopy-reflectance (CR) measurements are developed on the basis of empirical models relating CR to parameters such as soil and vegetation spectral properties, solar flux, and viewing angle. A general procedure for inverting CR models is presented and applied to the models of Suits (1972), Verhoef and Bunnik (1981), and Norman (1979) in the IR range. Numerical results for a soybean canopy are compared in a table, and the error sensitivity of the inverted models is shown to be relatively high, requiring the use of ancillary data such as soil reflectance, leaf reflectance, and leaf transmittance.
Based on the radiative transport theory of a homogeneous canopy, a new approach for obtaining transformations of spectral data used to estimate leaf area index (LAI), is developed. The transformations which are obtained without any ground knowledge of LAI show low sensitivity to soil variability, and are linearly related to LAI with relationships which are predictable from leaf reflectance, transmittance properties, and canopy reflectance models. Evaluation of the SAIL (scattering by arbitrarily inclined leaves) model is considered. Using only nadir view data, results obtained on winter and spring wheat and corn crops are presented.
The Airborne Imaging Spectrometer (AIS) was flown over a coastal wetlands region near Lewes, Delaware, adjacent to the Delaware Bay on 16 August 1984. Using the AIS data, it was possible to discriminate between four different types of wetland vegetation canopies: (1) trees; (2) broadleaf herbaceous plants (e.g., Acnida cannabina, Hisbiscus moscheutos); (3) the low marsh grass Spartina alterniflora; and (4) the high marsh grasses Distichlis spicata and Spartina patens. The single most useful region of the spectrum was that between 1.40 and 1.90 microns, where slopes of portions of the radiance curve and ratios of radiance at particular wavelengths were significantly different for the four canopy types. The ratio between the highest digital number in the 1.40 to 1.90 microns and .84 to .94 microns regions and a similar ratio between the peaks in radiance in the 1.12 to 1.40 microns and .84 to .94 microns spectral regions were also very effective at discriminating between vegetation types. Differences in radiance values at various wavelengths between samples of the same vegetation type could potentially be used to estimate biomass.
LANDSAT Thematic Mapper (TM) and Multispectral Scanner (MSS) imagery generated simultaneously over Guinea Marsh, Virginia, are assessed in the ability to detect submerged aquatic, bottom-adhering plant canopies (SAV). An unsupervised clustering algorithm is applied to both image types and the resulting classifications compared to SAV distributions derived from color aerial photography. Class confidence and accuracy are first computed for all water areas and then only shallow areas where water depth is less than 6 feet. In both the TM and MSS imagery, masking water areas deeper than 6 ft. resulted in greater classification accuracy at confidence levels greater than 50%. Both systems perform poorly in detecting SAV with crown cover densities less than 70%. On the basis of the spectral resolution, radiometric sensitivity, and location of visible bands, TM imagery does not offer a significant advantage over MSS data for detecting SAV in Lower Chesapeake Bay. However, because the TM imagery represents a higher spatial resolution, smaller SAV canopies may be detected than is possible with MSS data.
When simulating canopies planted in varied densities, researchers were able to demonstrate that increase of dry matter production by enhancing CO2 quickly becomes independant of increase of leaf area, especially above leaf area index of 2; dry matter gain results mainly from photosynthesis stimulation per unit of surface (primary CO2 effect). When crop density is low (the plants remaining alone a longer time), the effects of increasing leaf surface (tillering, leaf elongation here, branching for other plants etc.) was noticeable and dry matter simulation factor reached 1.65. This area effect decreased when canopy was closed in, as the effect of different surfaces no longer worked. The stimulation of photosynthesis reached to the primary CO2 effect. The accumulation in dry matter which was fast during that phase made the original weight advantage more and more neglectible. Comparison with short term measurements showed that first order long term effect of CO2 in wheat is predictible with short term experiment, from the effect of CO2 on photosynthesis measured on reference sample.
Remotely sensed scenes can be modeled as collections of discrete, three-dimensional objects that cast shadows on a background. Approaching scenes from this perspective has led to two related lines of research. First is the geometric/optical modeling of a forest canopy, in which conifers are modeled as cones whose size and spacing vary according to functions established by field measurements. This canopy model is 'L-resolution' in nature - the objects are smaller than the resolution cells of the image and cannot be resolved individually. Second is scene modeling in which image variance is taken as a function of the relationship between the size, shape and spacing of objects and the resolution cell size of the digital image derived from the scene. This modeling is 'H-resolution' in nature - the objects in the scene are assumed to be larger than the resolution cells of the image, and thus can be individually distinguished. Both approaches illustrate the utility of the discrete-object scene model in extracting information from remotely sensed scenes.
The potential of Thematic Mapper Simulator (TMS) data for sensing forest structure information has been explored by principal components and feature selection techniques. In a survey of forest structural properties conducted for 123 field sites of the Sequoia National Park, the canopy closure could be well estimated (r = 0.62 to 0.69) by a variety of channel bands and band ratios, without reference to the forest type. Estimation of the basal area was less successful (r = 0.51 or less) on the average, but could be improved for certain forest types when data were stratified by floristic composition. To achieve such a stratification, individual sites were ordinated by a detrended correspondence analysis based on the canopy of dominant species. The analysis of forest structure in the Sequoia data suggests that total basal area can be best predicted in stands of lower density, and in younger even-aged managed stands.
Aspects of volume scattering and emission theory are discussed, taking into account a weakly scattering medium, the Born approximation, first-order renormalization, the radiative transfer method, and the matrix-doubling method. Other topics explored are related to scatterometers and probing systems, the passive microwave sensing of the atmosphere, the passive microwave sensing of the ocean, the passive microwave sensing of land, the active microwave sensing of land, and radar remote sensing applications. Attention is given to inversion techniques, atmospheric attenuation and emission, a temperature profile retrieval from ground-based observations, mapping rainfall rates, the apparent temperature of the sea, the emission behavior of bare soil surfaces, the emission behavior of vegetation canopies, the emission behavior of snow, wind-vector radar scatterometry, radar measurements of sea ice, and the back-scattering behavior of cultural vegetation canopies.
A hierarchical procedure for developing a leaf area index (LAI) map of deciduous boreal forests is studied. The collection of spectral reflectance data from the Boundary Waters Canoe area in Minnesota using helicopter-, high-altitude aircraft-, and Landsat-mounted spectral sensors is described. The relationship between LAI and biomass and the reflectance ratio is analyzed. The sensitivity of canopy reflectance in the visible and infrared to the LAI of the canopy for various boreal forest species is evaluated. The data reveal that Landsat data are useful for producing LAI maps of deciduous forest areas and the maps provide data which clarifies the function of vegetation in the global carbon cycle models.
An alternative explanation is offered for the redshift (an abrupt change in the ratio of scattering to absorption in the radiance spectra of heading canopies of such crops as wheat and grain sorghum). The shift occurs abruptly at wavelengths near the red-infrared boundary towards the longer wavelengths. The new explanation, following that of Collins (1978) and Schutt et al. (1984), is based on one particular architectural change that occurs in any heading plant canopy. Specifically, the newly extended heads alter the interaction between light and the established foliage. The heads reduce the amount of sunlight striking the topmost leaves which are generally comparatively good specular reflectors. The heads also reduce the ability to observe the specularly reflecting leaves. The reduction in the amplitude of the radiance (due to decreased specularly reflected light) at heading appears to be a shift in the wavelength of the red edge. It is proposed that vertical (amplitude) shifts - due to changes in the amount of specularly reflected light as a function of heading - have been misinterpreted as horizontal (wavelength) shifts due in part to the characteristic shape of the radiance curve at the red edge.
A polarization photometer has been developed for rapidly determining the bidirectional, polarized, and diffuse light-scattering properties of individual leavs illuminated and measured 'in vivo' at an angle of 55 deg (approximately Brewster's angle) in six wavelength bands in the visible and near-IR wavelength regions. The optical performance and data quality of the system are evaluated to estimate the magnitude of the variation in the data attributable to the instrument system and to measurement procedures. The potential to discriminate between three species of oak is demonstrated using data acquired by the polarization photometer. The instrument is being used to increase understanding of the radiation transfer process in plant canopies and specifically to determine how agronomic information of the physical and chemical processes in leaves, plants, and plant canopies is expressed in these light-scattering properties.
Analysis of Thermal Infrared Multispectral Scanner data collected over H. J. Andrews experimental forest in western Oregon indicated that aspect and slope gradient had a greater effect on the thermal emission of younger reforested clearcuts than of older stands. Older forest stands (older than 25 years) with greater amounts of green biomass and closed canopies, had lower effective radiant temperatures than younger, less dense stands. Aspect and slope had little effect on the effective radiant temperature of these older stands. Canopy temperature recorded at approximately 1:30 pm local time July 29, 1983 were nearly equal to maximum daily air temperature recorded at eight reference stands. The investigation provided some insights into the utility of the thermal sensor for detecting surface temperature differences related to forest composition and green biomass amounts in mountain terrain.