Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Modification of the surface of GaAs and observation of surface enhanced Raman scattering after the diffusion of indium

The results of studies of the surface of GaAs in the presence of indium and phosphorus surfactants are reported. It is shown that, as a result of their diffusion (annealing) at a temperature of 650–670°C, clusters enriched with indium are formed in the GaAs surface region. The clusters can be seen as bright spots in an image obtained by a scanning electron microscope with the use of an in-lens detector. At the same time, studies of the morphology of this surface with an atomic-force microscope show a decrease in the root-meansquare roughness of the surface after annealing (diffusion), which is indicative of the incorporation of In atoms into the GaAs crystal lattice. The clusters are responsible for changes in the Raman spectra. Specifically, an increase in the signal intensity due to surface-enhanced Raman scattering and a shift of the vibration frequency in the surface region are observed. It is found that cluster formation is defined by the crystallographic orientation of the surface and by the technological conditions of surface preparation.

36 MATERIALS SCIENCE↗

Efficient simulation and model reformulation of two-dimensional electrochemical thermal behavior of lithium-ion batteries

Lithium-ion batteries are an important technology to facilitate efficient energy storage and enable a shift from petroleum based energy to more environmentally benign sources. Such systems can be utilized most efficiently if good understanding of performance can be achieved for a range of operating conditions. Mathematical models can be useful to predict battery behavior to allow for optimization of design and control. An analytical solution is ideally preferred to solve the equations of a mathematical model, as it eliminates the error that arises when using numerical techniques and is usually computationally cheap. An analytical solution provides insight into the behavior of the system and also explicitly shows the effects of different parameters on the behavior. However, most engineering models, including the majority of battery models, cannot be solved analytically due to non-linearities in the equations and state dependent transport and kinetic parameters. The numerical method used to solve the system of equations describing a battery operation can have a significant impact on the computational cost of the simulation. In this paper, a model reformulation of the porous electrode pseudo three dimensional (P3D) which significantly reduces the computational cost of lithium ion battery simulation, while maintaining high accuracy, is discussed. This reformulation enables the use of the P3D model into applications that would otherwise be too computationally expensive to justify its use, such as online control, optimization, and parameter estimation. Furthermore, the P3D model has proven to be robust enough to allow for the inclusion of additional physical phenomena as understanding improves. In this study, the reformulated model is used to allow for more complicated physical phenomena to be considered for study, including thermal effects.

25 ENERGY STORAGE↗

Amplified Extreme Floods and Shifting Flood Mechanisms in the Delaware River Basin in Future Climates

Abstract Historical records in the Delaware River Basin reveal complex and spatially diverse flood generating mechanisms influenced by the region's mountains‐to‐plains gradients. This study focuses on predicting future flood hazards and understanding the underlying drivers of changes across the region. Using a process‐based hydrological model, we analyzed the hydrometeorological condition of each historical and future flood event. For each event, at the subbasin scale, we identified the dominant flood generating mechanism, including snowmelt, rain‐on‐snow, short‐duration rain, and long‐duration rain. The rain‐induced floods are further categorized based on the soil's Antecedent Moisture Condition (AMC) before the event, whether dry, normal, or wet. Our historical analysis suggests that rain‐on‐snow is the primary flood mechanism of the Upper Basin. Although most frequent, the magnitude of rain‐on‐snow floods is often less severe than short rain floods. In contrast, historical floods in the Lower Basin are primarily caused by short rain under normal AMC. Given the uncertainties in climate projections, we used an ensemble of future climate scenarios for flood projections. Despite variations in regional climate projections, coherent perspectives emerge: the region will shift toward a warmer, wetter climate, with a projected intensification of extreme floods. The Upper Basin is projected to experience a marked decrease in rain‐on‐snow floods, but a substantial increase in short rain floods with wet AMC. The largest increase in flood magnitude will be driven by short rains with wet AMC in the Upper Basin and by short rains with normal AMC in the Lower Basin.

54 ENVIRONMENTAL SCIENCES↗

A novel femtosecond-gated, high-resolution, frequency-shifted shearing interferometry technique for probing pre-plasma expansion in ultra-intense laser experiments

Ultra-intense laser-matter interaction experiments (>10{sup 18} W/cm{sup 2}) with dense targets are highly sensitive to the effect of laser “noise” (in the form of pre-pulses) preceding the main ultra-intense pulse. These system-dependent pre-pulses in the nanosecond and/or picosecond regimes are often intense enough to modify the target significantly by ionizing and forming a plasma layer in front of the target before the arrival of the main pulse. Time resolved interferometry offers a robust way to characterize the expanding plasma during this period. We have developed a novel pump-probe interferometry system for an ultra-intense laser experiment that uses two short-pulse amplifiers synchronized by one ultra-fast seed oscillator to achieve 40-fs time resolution over hundreds of nanoseconds, using a variable delay line and other techniques. The first of these amplifiers acts as the pump and delivers maximal energy to the interaction region. The second amplifier is frequency shifted and then frequency doubled to generate the femtosecond probe pulse. After passing through the laser-target interaction region, the probe pulse is split and recombined in a laterally sheared Michelson interferometer. Importantly, the frequency shift in the probe allows strong plasma self-emission at the second harmonic of the pump to be filtered out, allowing plasma expansion near the critical surface and elsewhere to be clearly visible in the interferograms. To aid in the reconstruction of phase dependent imagery from fringe shifts, three separate 120° phase-shifted (temporally sheared) interferograms are acquired for each probe delay. Three-phase reconstructions of the electron densities are then inferred by Abel inversion. This interferometric system delivers precise measurements of pre-plasma expansion that can identify the condition of the target at the moment that the ultra-intense pulse arrives. Such measurements are indispensable for correlating laser pre-pulse measurements with instantaneous plasma profiles and for enabling realistic Particle-in-Cell simulations of the ultra-intense laser-matter interaction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Abiotic Stresses Shift Belowground Populus-Associated Bacteria Toward a Core Stress Microbiome

The identification of a common “stress microbiome” indicates tightly controlled relationships between the plant host and bacterial associates and a conserved structure in bacterial communities associated with poplar trees under different growth conditions. The ability of the microbiome to buffer the plant from extreme environmental conditions coupled with the conserved stress microbiome observed in this study suggests an opportunity for future efforts aimed at predictably modulating the microbiome to optimize plant growth.

59 BASIC BIOLOGICAL SCIENCES↗

Resilience of seed production to a severe El Niño-induced drought across functional groups and dispersal types

More frequent and severe El Niño Southern Oscillations (ENSO) are causing episodic periods of decreased rainfall. Although the effects of these ENSO-induced droughts on tree growth and mortality have been well studied, the impacts on other demographic rates such as reproduction are less well known. We use a four-year seed rain dataset encompassing the most severe ENSO-induced drought in more than 30 years to assess the resilience (i.e., resistance and recovery) of the seed composition and abundance of three forest types in a tropical dry forest. We found that forest types showed distinct differences in the timing, duration, and intensity of drought during the ENSO event, which likely mediated seed composition shifts and resilience. Drought-deciduous species were particularly sensitive to the drought with overall poor resilience of seed production, whereby seed abundance of this functional group failed to recover to predrought levels even two years after the drought. Liana and wind-dispersed species were able to maintain seed production both during and after drought, suggesting that ENSO events promote early successional species or species with a colonization strategy. Combined, these results suggest that ENSO-induced drought mediates the establishment of functional groups and dispersal types suited for early successional conditions with more open canopies and reduced competition among plants. Finally, the effects of the ENSO-induced drought on seed composition and abundance were still evident two years after the event suggesting the recovery of seed production requires multiple years that may lead to shifts in forest composition and structure in the long term, with potential consequences for higher trophic levels like frugivores.

59 BASIC BIOLOGICAL SCIENCES↗

Opportunistic Short‐Term Water Uptake Dynamics by Subalpine Trees Observed via In Situ Water Isotope Measurements

Abstract Variations in tree water sources are important to understand in semi‐arid ecosystems because climatic shifts towards lower snowpack and increased drought affect water availability in subalpine forests of the western US. Here, we use daily in situ measurements of stable isotopes ( 2 H & 18 O) in soil and tree stem water, soil matric potential and sap flow to study tree water uptake dynamics. We instrumented three soil profiles down to 90 cm, as well as three aspen and engelmann spruce trees near Gothic, Colorado, in the East River watershed. We observed the fate of natural isotopic variations in rainfall, soil, and plants from June to October 2022, and in August 2023 we conducted a 2 H labeled irrigation experiment. Our observations showed that all studied aspen trees compensated for water scarcity in the shallow soil by shifting the dominant water source at 60(±20) cm to ⅔ of uptake from 90 cm within a few days of a dry period. Both species relied on snowmelt stored in the subsoil to sustain transpiration. Intense rainfall caused the plant water uptake to shift partially to top soil layers within 2 days. Spruce transpiration was lower and relied more on snowmelt, because rainfall infiltration was low in the spruce stand due to high canopy interception. Our findings highlight the important role of snowmelt stored in the deep soil layers for subalpine forest drought response and the dominant fate of monsoonal rainfall to become transpiration rather than recharging groundwater and streams in the Upper Colorado River. Plain Language Summary There is a need to understand how trees in mountainous regions respond to dry conditions that lead to water scarcity, because climate projections suggest that such conditions will become more frequent in the future. Here we present a novel data set of measurements of daily stable isotopes of water across soil profiles and in tree stems of aspen and spruce. Our data show that when the upper soil dried out, aspen trees shifted to using water from deeper layers (beneath 60 cm) to keep transpiring. For spruce trees the uptake pattern is less clear, but both types of trees mainly used snowmelt stored in the deeper soil layers to survive the dry summer. After heavy rain, aspen and spruce trees switched to using water from the top 20 cm of soil. However, for spruce, only some rain reached the soil because the dense tree canopy intercepted it, so spruce trees stayed more dependent on snowmelt and used less water overall. This study shows how important deep snowmelt water is for helping forests survive dry periods and suggests that most summer rain is quickly used by trees rather than replenishing streams and groundwater in the headwaters of the Colorado River. Key Points Tree water resources changed within a few days from snow dominated to higher share of rainfall as soils wetted up after a dry period Compensatory plant water uptake by aspen from the deep layer (90 cm), while uptake from soil depths that became drier (60 cm) declined Strong differences between water sources and availability beneath aspen and spruce, respectively

Sprenger, Matthias↗

Broadband microwave characteristics of a novel coaxial gridded hollow cathode argon plasma

The interaction between microwave and large area plasma is crucially important for space communication. Gas pressure, input power, and plasma volume are critical to both the microwave electromagnetic wave phase shift and electron density. This paper presents a novel type of large coaxial gridded hollow cathode plasma having a 50 cm diameter and a 40 cm thickness. Microwave characteristics are studied using a microwave measurement system that includes two broadband antennae in the range from 2 GHz to 18 GHz. The phase shift under varying gas pressure and input power is shown. In addition, the electron density n{sub e}, which varies from 1.2 × 10{sup 16} m{sup −3} to 8.7 × 10{sup 16} m{sup −3} under different discharge conditions, is diagnosed by the microwave system. The measured results accord well with those acquired by Langmuir Probe measurement and show that the microwave properties in the large volume hollow cathode discharge significantly depend on the input power and gas pressure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gain-assisted control of the Goos-Haenchen shift

A gain-assisted model is considered to study the Goos-Haenchen (GH) shift behavior in the reflected and transmitted light. In this model, a probe light is incident on a cavity containing three-level dilute gaseous atomic medium. The atom-field interaction follows two-photon Raman transitions, and the dielectric susceptibility of the medium exhibits dispersion and gain properties [L. J. Wang, A. Kuzmich, and A. Dogariu, Nature (London) 406, 227 (2000)]. Under appropriate conditions, two gain peaks are observed with anomalous dispersion between the peaks, whereas normal dispersion can be observed at and around the gain maxima. The manipulation of the detuning associated with the probe light field which interacts with the intracavity medium during its propagation through the cavity can lead to a control over negative and positive GH shift in the reflected and transmitted light beam via the anomalous and normal dispersion of the medium.

74 ATOMIC AND MOLECULAR PHYSICS↗

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗

An efficient iterative algorithm for computation of scattering from dielectric objects.

We have developed an efficient iterative algorithm for electromagnetic scattering of arbitrary but relatively smooth dielectric objects. The algorithm iteratively adapts the equivalent surface currents until the electromagnetic fields inside and outside the dielectric objects match the boundary conditions. Theoretical convergence is analyzed for two examples that solve scattering of plane waves incident upon air/dielectric slabs of semi-infinite and finite thicknesses. We applied the iterative algorithm for simulation of sinusoidally-perturbed dielectric slab on one side and the method converged for such unsmooth surfaces. We next simulated the shift in radiation pattern of a 6-inch dielectric lens for different offsets of the feed antenna on the focal plane. The result is compared to that of the Geometrical Optics (GO).

36 MATERIALS SCIENCE↗

Utilization of the St. Peter Sandstone in the Illinois Basin for CO2 Sequestration

This project is part of a larger project co-funded by the United States Department of Energy (US DOE) under cooperative agreement DE-FE0002068 from 12/08/2009 through 9/31/2014. The study is to evaluate the potential of formations within the Cambro-Ordovician strata above the Mt. Simon Sandstone as potential targets for carbon dioxide (CO2) sequestration in the Illinois and Michigan Basins. This report evaluates the potential injectivity of the Ordovician St. Peter Sandstone. The evaluation of this formation was accomplished using wireline data, core data, pressure data, and seismic data acquired through funding in this project as well as existing data from two additional, separately funded projects: the US DOE funded Illinois Basin – Decatur Project (IBDP) being conducted by the Midwest Geological Sequestration Consortium (MGSC) in Macon County, Illinois, and the Illinois Industrial Carbon Capture and Sequestration (ICCS) Project funded through the American Recovery and Reinvestment Act (ARRA), which received a phase two award from DOE. This study addresses the question of whether or not the St. Peter Sandstone may serve as a suitable target for CO2 sequestration at locations within the Illinois Basin where it lies at greater depths (below the underground source of drinking water (USDW)) than at the IBDP site. The work performed included numerous improvements to the existing St. Peter reservoir model created in 2010. Model size and spatial resolution were increased resulting in a 3 fold increase in the number of model cells. Seismic data was utilized to inform spatial porosity distribution and an extensive core database was used to develop porosity-permeability relationships. The analysis involved a Base Model representative of the St. Peter at “in-situ” conditions, followed by the creation of two hypothetical models at in-situ + 1,000 feet (ft.) (300 m) and in-situ + 2,000 ft. (600 m) depths through systematic depthdependent adjustment of the Base Model parameters. Properties for the depth shifted models were based on porosity versus depth relationship extracted from the core database followed by application of the porosity-permeability relationship. Each of the three resulting models were used as input to dynamic simulations with the single well injection target of 3.2 million tons per annum (MTPA) for 30 years using an appropriate fracture gradient based bottom hole pressure limit for each injection level. Modeling results are presented in terms of well bottomhole pressure (BHP), injection rate profiles, and three-dimensional (3D) saturation and differential pressure volumes at selected simulation times. Results suggest that the target CO2 injection rate of 3.2 MTPA may be achieved in the St. Peter Sandstone at in-situ conditions and at the in-situ +1,000 ft. (300 m) depth using a single injector well. In the latter case the target injection rate is achieved after a ramp up period which is caused by multi-phase flow effects and thus subject to increased modeling uncertainty. Results confirm that the target rate may not be achieved at the in-situ +2,000 ft. (600 m) level even with multiple wells. These new modeling results for the in-situ case are more optimistic than previous modeling results. This difference is attributed to the difference in methods and data used to develop model permeability distributions. Recommendations for further work include restriction of modeling activity to the in-situ +1,000 ft. (300 m) and shallower depth interval, sensitivity and uncertainty analysis, and refinement of porosity and permeability estimates through depth and area selective querying of the available core database. It is also suggested that further modeling efforts include scope for evaluating project performance in terms of metrics directly related to the Environmental Protection Agency (EPA) Class VI permit requirements for the area of review (AoR) definition and post injection site closure monitoring.

Will, Robert↗

Shifts in pore connectivity from precipitation versus groundwater rewetting increases soil carbon loss after drought

Droughts and other extreme precipitation events are predicted to increase in intensity, duration and extent, with uncertain implications for terrestrial carbon (C) sequestration. Soil wetting from above (precipitation) results in a characteristically different pattern of pore-filling than wetting from below (groundwater), with larger, well-connected pores filling before finer pore spaces, unlike groundwater rise in which capillary forces saturate the finest pores first. Here we demonstrate that pore-scale wetting patterns interact with antecedent soil moisture conditions to alter pore-, core- and field-scale C dynamics. Drought legacy and wetting direction are perhaps more important determinants of short-term C mineralization than current soil moisture content in these soils. Our results highlight that microbial access to C is not solely limited by physical protection, but also by drought or wetting-induced shifts in hydrologic connectivity. We argue that models should treat soil moisture within a three-dimensional framework emphasizing hydrologic conduits for C and resource diffusion.

Carbon↗

Effects of molecular structure on oxidation reactivity of cyclic hydrocarbons: Experimental observations and conformational analysis

This work concerns the pre-ignition reactivity of cyclic hydrocarbons and its dependence on cyclic structures. In the first part, global reactivity of five cyclic hydrocarbons, methylcyclopentane (MCP), cyclohexane (CH), methylcyclohexane (MCH), decahydronaphthalene (decalin), and 1,2,3,4-tetrahydronaphthalene (tetralin), whose detailed product analyses were recently reported [Y. Yang, A.L. Boehman, Proc. Combust. Inst. 32(1) (2009) 419-426; Y. Yang, A.L. Boehman, Combust. Flame 157(3) (2010) 495-505], were compared over a range of compression ratio and intake temperature in a motored engine. Molecular structure exerts a profound effect on low temperature oxidation reactivity. Decalin is the most reactive compound whose extent of oxidation increases monotonically with increasing temperature and pressure. MCH shows higher low temperature reactivity than CH, and both show distinct negative temperature coefficient behavior. MCP and tetralin exhibit little low temperature reaction before critical conditions are reached for autoignition. In the second part, conformational analysis is conducted to understand how molecular structures affect the low temperature oxidative reactivity, in particular the (1,5) H-shift of fuel peroxy radicals (ROO{yields}{sup (1,5)}QOOH), the key step in low temperature chain branching. In comparison with open-chain structures, cyclic structures significantly reduce the total number of hydrogens that can be abstracted in the (1,5) H-shift. This is because the (1,5) H-shift of a cyclohexylperoxy radical requires both the peroxy group and the to-be-abstracted hydrogen locate at an axial position on the cyclohexane ring. The total number of available hydrogens in decalin, MCH, CH, and tetralin is 14, 11, 6, and 4, respectively. Also important is the number of hydrogens available for the (1,5) isomerization of a given peroxy group, i.e., the degeneracy of the (1,5) H-shift. Degeneracy in (1,5) H-shift for decalin, MCH, CH, and tetralin is {proportional_to}3, 2-3, 2, and 1, respectively. These numbers are in accord with the relative reactivity observed for these compounds. The higher reactivity of MCH relative to CH also results from the equatorial preference of the methyl group which forces the peroxy group to stay at an axial position and facilitates (1,5) H-shift. The last argument is confirmed by quantum mechanical calculations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitive magnetic force detection with a carbon nanotube resonator

We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can translate to detectable frequency shifts, on the order of a few kHz. The dependences of the resonator response to device parameters such as length, tension, CNT diameter, and gate voltage are explored and optimal operating conditions are identified. A signal-to-noise analysis shows that, in principle, magnetic switching at the level of a single Bohr magneton can be read out in a single shot on timescales as short as 10 μs. This force sensor should enable new studies of spin dynamics in isolated single molecule magnets, free from the crystalline or ensemble settings typically studied.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Inter-cage dynamics in structure I, II, and H fluoromethane hydrates as studied by NMR and molecular dynamics simulations

Prospective industrial applications of clathrate hydrates as materials for gas separation require further knowledge of cavity distortion, cavity selectivity, and defects induction by guest-host interactions. The results presented in this contribution show that under certain temperature conditions the guest combination of CH{sub 3}F and a large polar molecule induces defects on the clathrate hydrate framework that allow intercage guest dynamics. {sup 13}C NMR chemical shifts of a CH{sub 3}F/CH{sub 4}/TBME sH hydrate and a temperature analysis of the {sup 2}H NMR powder lineshapes of a CD{sub 3}F/THF sII and CD{sub 3}F/TBME sH hydrate, displayed evidence that the populations of CH{sub 4} and CH{sub 3}F in the D and D{sup ′} cages were in a state of rapid exchange. A hydrogen bonding analysis using molecular dynamics simulations on the TBME/CH{sub 3}F and TBME/CH{sub 4} sH hydrates showed that the presence of CH{sub 3}F enhances the hydrogen bonding probability of the TBME molecule with the water molecules of the cavity. Similar results were obtained for THF/CH{sub 3}F and THF/CH{sub 4} sII hydrates. The enhanced hydrogen bond formation leads to the formation of defects in the water hydrogen bonding lattice and this can enhance the migration of CH{sub 3}F molecules between adjacent small cages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocluster ionization energies and work function of aluminum, and their temperature dependence

Ionization threshold energies of Al{sub n} (n = 32-95) nanoclusters are determined by laser ionization of free neutral metal clusters thermalized to several temperatures in the range from 65 K to 230 K. The photoion yield curves of cold clusters follow a quadratic energy dependence above threshold, in agreement with the Fowler law of surface photoemission. Accurate data collection and analysis procedures make it possible to resolve very small (few parts in a thousand) temperature-induced shifts in the ionization energies. Extrapolation of the data to the bulk limit enables a determination of the thermal shift of the polycrystalline metal work function, found to be in excellent agreement with theoretical prediction based on the influence of thermal expansion. Small clusters display somewhat larger thermal shifts, reflecting their greater susceptibility to thermal expansion. Ionization studies of free size-resolved nanoclusters facilitate understanding of the interplay of surface, electronic, and lattice properties under contamination-free conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond laser pulse filamentation under anomalous dispersion in fused silica. Part 2. Experiment and physical interpretation

We have studied experimentally and analytically the formation of the supercontinuum (SC) spectrum during femtosecond laser pulse filamentation in fused silica under conditions of zero and anomalous group velocity dispersions. It is found that with increasing centre wavelength from 1300 to 2300 nm, the SC spectrum of the anti-Stokes wing narrows, shifting to the blue. It is shown that the anti-Stokes (blue) shift of the SC spectrum increases with the multiphoton order of the medium ionisation by the light field in the filament. It is found that a broad minimum in the SC spectrum, separating the anti-Stokes wing from the centre wavelength, is a result of the interference of radiation from a moving broadband source, stemming from self-phase modulation of the high-intensity light field. The interference factors of the SC spectra obtained for this source, which moves along the emitting region of the filament in a dispersive medium, are in agreement with experimental and numerical results. (nonlinear optical phenomena)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗