Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Compressional behavior and spin state of δ-(Al,Fe)OOH at high pressures

Hydrogen transport from the surface to the deep interior and distribution in the mantle are important in the evolution and dynamics of the Earth. An aluminum oxy-hydroxide, δ-AlOOH, might influence hydrogen transport in the deep mantle because of its high stability extending to lower mantle conditions. The compressional behavior and spin states of δ-(Al,Fe 3+ )OOH phases were investigated with synchrotron X-ray diffraction and Mössbauer spectroscopy under high pressure and room temperature. Pressure-volume (P-V) profiles of the δ-(Al 0.908(9) 57 Fe 0.045(1) )OOH 1.14(3) [Fe/(Al+Fe) = 0.047(10), δ-Fe5] and the δ-(Al 0.832(5) 57 Fe 0.117(1) )OOH 1.15(3) [Fe/(Al+Fe) = 0.123(2), δ-Fe12] show that these hydrous phases undergo two distinct structural transitions involving changes in hydrogen bonding environments and a high- to low-spin crossover in Fe 3+ . A change of axial compressibility accompanied by a transition from an ordered ( P 2 1 nm ) to disordered hydrogen bond ( Pnnm ) occurs near 10 GPa for both δ-Fe5 and δ-Fe12 samples. Through this transition, the crystallographic a and b axes become stiffer, whereas the c axis does not show such a change, as observed in pure δ-AlOOH. A volume collapse due to a transition from high- to low-spin states in the Fe 3+ ions is complete below 32–40 GPa in δ-Fe5 and δ-Fe12, which i ~10 GPa lower than that reported for pure ε-FeOOH. Evaluation of the Mössbauer spectra of δ-(Al 0.824(10) 57 Fe 0.126(4) )OOH 1.15(4) [Fe/(Al+Fe) = 0.133(3), δ-Fe13] also indicate a spin transition between 32–45 GPa. Phases in the δ-(Al,Fe)OOH solid solution with similar iron concentrations as those studied here could cause an anomalously high ρ/ν Φ ratio (bulk sound velocity, defined as √K/ρ at depths corresponding to the spin crossover region (~900 to ~1000 km depth), whereas outside the spin crossover region a low ρ/ν Φ anomaly would be expected. Here, these results suggest that the δ-(Al,Fe)OOH solid solution may play an important role in understanding the heterogeneous structure of the deep Earth.

58 GEOSCIENCES↗
DOE OSTI2023

Structure and Anharmonicity of α- and β -Sb 2 O 3 at Low Temperature

Antimony oxides are important materials for catalysis and flame-retardant applications. The two most common phases, α-Sb 2 O 3 (senarmontite) and β-Sb 2 O 3 (valentinite), have been studied extensively. Specific focus has been placed recently on their lattice dynamics properties and how they relate to the α-β phase transformation and their potential anharmonicity. However, there has not been any direct investigation of anharmonicity in these systems, and a surprising lack of low-temperature structural information has prevented further study. Here, we report the powder neutron diffraction data of both phases of Sb 2 O 3 , as well as structural information. α-Sb 2 O 3 behaved as expected, but β-Sb 2 O 3 revealed a small region of zero thermal expansion along the c axis. Additionally, while the β phase matched well with reported atomic displacement parameters, the α phase displayed a marked deviation. This data will enable further investigations into these systems.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructural Evolution of Al-1Fe (Weight Percent) Alloy During Accumulative Continuous Extrusion Forming

As a new microstructure refining method, accumulative continuous extrusion forming (ACEF) cannot only refine metal matrix but also refine the phases that exist in it. In order to detect the refinements of grain and second phase during the process, Al-1Fe (wt pct) alloy was processed by ACEF, and the microstructural evolution was analyzed by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Results revealed that the average grain size of Al-1Fe (wt pct) alloy decreased from 13 to 1.2 μm, and blocky Al{sub 3}Fe phase with an average length of 300 nm was granulated to Al{sub 3}Fe particle with an average diameter of 200 nm, after one pass of ACEF. Refinement of grain was attributed to continuous dynamic recrystallization (CDRX), and the granulation of Al{sub 3}Fe phase included the spheroidization resulting from deformation heat and the fragmentation caused by the coupling effects of strain and thermal effect. The spheroidization worked in almost the entire deformation process, while the fragmentation required strain accumulation. However, fragmentation contributed more than spheroidization. Al{sub 3}Fe particle stimulated the formation of substructure and retarded the migration of recrystallized grain boundary, but the effect of Al{sub 3}Fe phase on refinement of grain could only be determined by the contrastive investigation of Al-1Fe (wt pct) alloy and pure Al.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Flat Analyzer Polycapillary Spectrometer for X-ray Absorption Spectroscopy of Dilute Transition Metals at X-ray-Free Electron Lasers

X-ray absorption spectroscopy (XAS) coupled with highly intense pulses from an X-ray-free electron laser (XFEL) can be used to track ultrafast chemical dynamics. Nonetheless, measurements for dilute samples (≤1 mM) have been exceptionally challenging, as scattering background signals dominate over the sample’s X-ray fluorescence. We show that femtosecond time-resolved XAS measurements of sub-millimolar transition metal solutions are now possible at the Linac Coherent Light Source (LCLS) using a high-throughput polycapillary XAS spectrometer, designed, developed, and commissioned at LCLS and the Stanford Synchrotron Radiation Lightsource (SSRL). The instrument integrates three polycapillary optics that collect and collimate X-ray fluorescence emitted from the interaction point with a high solid angle. X-ray collimated fluorescence is then selectively diffracted by coupled graphite analyzer crystals. As a result, the contribution of scattered photons is suppressed. Experiments at the Pt L 3 -edge on 0.1 mM aqueous K 2 PtCl 6 (delivered via a 100 μm liquid jet) were successfully performed in the laser pump X-ray probe configuration at the LCLS XCS and XPP instruments. We report the transient spectra of hexachloroplatinate within the first 10 ps after a 266 nm photoexcitation. We observed a short-lived reduced intermediate (≈2 ps). The polycapillary X-ray spectrometer at LCLS now enables the efficient study of the dynamics of ultradilute transition metals in solution. This capability opens the door to investigating plasmonic systems, photocatalysts, enzymes, and other scarce and dilute samples.

LCLS↗
DOE OSTI2024

Titanium Dioxide Nanomaterial Ink Production Through Laser Ablation Synthesis in Solution for Printed Electronics Applications

Flexible and printed electronics have become increasingly popular as they make possible the production of flexible, low-cost, multifunction devices that are unachievable through traditional manufacturing methods. The printed films are significantly impacted and thus limited by the existing ink production process. Herein, an alternate technique of generating high-quality titanium dioxide (TiO 2 ) nanoparticle ink compatible with aerosol jet printing using laser ablation synthesis in solution (LASiS) is showcased. Dynamic light scattering data and transmission electron microscopy confirm the particle size distribution. UV–vis measurements are performed, and the Beer–Lambert relationship is used to determine the concentration of the generated ink. The inks generated at two different repetition rates are compared: 200 kHz and 1 MHz. X-Ray diffraction analysis of the aerosol jet printed thin film post-thermal sintering confirms the grain size and phase purity of the printed thin films. This work demonstrates the effectiveness of the LASiS technique in producing printable nanoparticle inks with little-to-no postprocessing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Medium-Range Ordering in the Ionic Glass Electrolytes LiPON and LiSiPON

In this work, we provide an in-depth structural characterization of the amorphous ionic glasses LiPON and LiSiPON with high Li content. Based on ab initio molecular dynamics simulations, the structure of these materials is an inverted structure with either isolated polyanion tetrahedra or polyanion dimers in a Li+ matrix. Based on neutron scattering data, this type of inverted structure leads to a significant amount of medium-range ordering in the structure, as demonstrated by two sharp diffraction peaks and a periodic structural oscillation in the density function G(r). While this medium-range ordering is commonly observed in liquids and metallic glasses, it has not previously been observed in oxides. On a local scale, adding N and Si increases the number of anion bridges and polyanion dimer structures, leading to higher ionic conductivity. In the medium-range ordering, the addition of Si leads to more disorder in the polyanion substructure but a significant increase in the ordering of the O substructure. Finally, we demonstrate that this inverted structure with medium-range ordering results in a glassy material that is both mechanically stiff and ductile on the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ultrafast photonic micro-systems to manipulate hard X-rays at 300 picoseconds

Time-resolved and ultrafast hard X-ray imaging, scattering and spectroscopy are powerful tools for elucidating the temporal and spatial evolution of complexity in materials. However, their temporal resolution has been limited by the storage-ring timing patterns and X-ray pulse width at synchrotron sources. Here we demonstrate that dynamic X-ray optics based on micro-electro-mechanical-system resonators can manipulate hard X-ray pulses on time scales down to 300 ps, comparable to the X-ray pulse width from typical synchrotron sources. This is achieved by timing the resonators with the storage ring to diffract X-ray pulses through the narrow Bragg peak of the single-crystalline material. Angular velocities exceeding 10 7 degrees s -1 are reached while maintaining the maximum linear velocity well below the sonic speed and material breakdown limit. As the time scale of the devices shortens, the devices promise to spatially disperse the temporal width of X-rays, thus generating a temporal resolution below the pulse-width limit.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A new layered kagome strip structure Na 2 Co 3 (AsO 4 ) 2 (OH) 2 : static and dynamic magnetic properties

One-dimensional kagome strip chains share much of the same frustrated structural motif as two-dimensional kagome antiferromagnets, making them valuable for deepening our understanding of kagome lattice magnetism. In this paper, we report the hydrothermal synthesis and detailed structural and property characterization of Na 2 Co 3 (AsO 4 ) 2 (OH) 2 , a striped kagome system. The crystal structure was characterized using single crystal X-ray diffraction which reveals that Na 2 Co 3 (AsO 4 ) 2 (OH) 2 crystallizes in monoclinic crystal system C2/m. The structure features a one-dimensional kagome strip lattice built from Co 2+ ions and undergoes an antiferromagnetic transition at T N = 14 K. The magnetic ground state at zero field was characterized using neutron powder diffraction. Below the magnetic transition, Na 2 Co 3 (AsO 4 ) 2 (OH) 2 orders into an antiferromagnetic structure with a k-vector (0.5, 0.5, 0.5). In the proposed model, the Co1 moment is predominantly confined to the ac-plane while the Co2 moment is primarily aligned along the b-axis. Two flat bands were observed in the inelastic neutron spectra below the magnetic transition, 5 and 10 meV. Inelastic neutron spectra were modeled with a Heisenberg Hamiltonian including three nearest-neighbor exchange interactions (J 1 , J 2 , J 3 ) and strong single-ion anisotropy to stabilize the observed magnetic structure. Our study highlights the complexity of Co 2+ -based kagome strip magnetic lattice compound Na 2 Co 3 (AsO 4 ) 2 (OH) 2 which provides an excellent platform to broaden our understanding of the frustrated kagome magnetic lattice space.

Liurukara, Duminda S. [Oak Ridge National Laborato↗
DOE OSTI2026

Reaction Mechanism of Electrodeposited ε-MnO 2 : A Proton-Centered Pathway in Aqueous Zn-Ion Systems

Aqueous Zn/MnO 2 batteries have garnered significant interests owing to their abundance, high theoretical specific capacity, safety, and low cost. However, large-scale application of these systems is limited by the incomplete understanding of the MnO 2 reaction chemistry. The different crystal lattice structures among MnO 2 polymorphs contribute to the variations in reported reaction mechanisms. Among them, ε-MnO 2 polymorph, the dominant phase in electrolytic manganese dioxide (EMD), is notably observed during the charge cycles of aqueous Zn/MnO 2 batteries. Here, in this work, we investigate the electrochemical behavior of an ε-MnO 2 cathode synthesized via electrodeposition from a ZnSO 4 and MnSO 4 electrolyte, onto a 3-dimensional carbon cloth substrate. Proton intercalation emerges as the dominant charge storage mechanism, critically enabling the reversibility of ε-MnO 2 during cycling, as revealed by operando synchrotron X-ray diffraction and X-ray absorption spectroscopy. Additionally, a proton-coupled dissolution/redeposition pathway operates alongside minor Zn 2+ intercalation, as quantified by Rietveld refinement. Morphological and chemical heterogeneities are studied by transmission X-ray microscopy further validates this reaction mechanism. These mechanistic insights provide the foundation for rationally designing Zn/MnO 2 batteries with optimized proton dynamics and charge transfer, advancing these systems as a viable solution for safe, cost-effective grid-scale energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Phonon-assisted formation of an itinerant electronic density wave

Abstract Electronic instabilities drive ordering transitions in condensed matter. Despite many advances in the microscopic understanding of the ordered states, a more nuanced and profound question often remains unanswered: how do the collective excitations influence the electronic order formation? Here, we experimentally show that a phonon affects the spin density wave (SDW) formation after an SDW-quench by femtosecond laser pulses. In a thin film, the temperature-dependent SDW period is quantized, allowing us to track the out-of-equilibrium formation path of the SDW precisely. By exploiting its persistent coupling to the lattice, we probe the SDW through the transient lattice distortion, measured by femtosecond X-ray diffraction. We find that within 500 femtoseconds after a complete quench, the SDW forms with the low-temperature period, directly bypassing a thermal state with the high-temperature period. We argue that a wavevector-matched phonon launched by the quench changes the formation path of the SDW through the dynamic pinning of the order parameter.

42 ENGINEERING↗
DOE OSTI2022

Hydrogen solubility in FeSi alloy phases at high pressures and temperatures

Abstract Light elements alloying with metallic Fe can change the properties and therefore play a key role in the structure and dynamics of planetary cores. Hydrogen and silicon are possible light elements in the rocky planets’ cores. However, hydrogen storage in Fe-Si alloy systems remains unclear at high pressures and high temperatures because of experimental difficulties. Taking advantage of pulsed laser heating combined with high-energy synchrotron X-ray diffraction, we studied reactions between FeSi and H in laser-heated diamond-anvil cells (LHDACs) up to 61.9 GPa and 3500 K. We found that under H-saturated conditions the amount of H alloying with FeSi (0.3 and <0.1 wt% for the B20 and B2 structures, respectively) is much smaller than that in pure Fe metal (>1.8 wt%). Our experiments also suggest that H remains in the crystal structure of FeSi alloy when recovered to 1 bar. Further density functional theory (DFT) calculations indicate that the low-H solubility likely results from the highly distorted interstitial sites in the B20 and B2 structures, which are not favorable for H incorporation. The recovery of H in the B20 FeSi crystal structure at ambient conditions could open up possibilities to understand geochemical behaviors of H during core formation in future experiments. The low-H content in FeSi alloys suggests that if a planetary core is Si-rich, Si can limit the ingassing of H into the Fe-rich core.

Geochemistry & Geophysics↗
DOE OSTI2020

Structural disorder, sublattice melting, and thermo-elastic properties of anti-perovskite Li 3 OBr under high pressure and temperature

Here, in situ synchrotron x-ray diffraction experiments were conducted in the system Li-O-Br at pressures up to 6.5 GPa and temperatures up to the melting points. The thermal equation of state determined from the P–V–T measurements indicates that crystalline anti-perovskite Li 3 OBr exhibits similar thermo-elastic properties to common salts. At temperatures that are 50–75 °C below the crystal melting, a pre-melting behavior was inferred based on weakened Bragg intensity and a substantial increase in the diffuse scattering. Concurrent with the onset of pre-melting, an anomalous increase in the lattice volume was observed and is interpreted as anion sublattice disorder. These findings support previous ab initio molecular dynamics simulations based on a simple anion interchange mechanism, indicating that structural disorder below crystal melting temperature can be a main driving force for Li-sublattice melting and superionic transition in the Li 3 OBr anti-perovskite.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Unified Beam-Dynamics and Hardware Design Framework for Hybrid Nonlinear-Kicker Injection in NSLS-II

Nonlinear kickers (NLKs) enable off-axis injection in ultralow-emittance storage rings by providing a strong kick to the injected beam while remaining nearly transparent to the stored beam. In hybrid schemes, a conventional four-kicker bump defines the injected trajectory, and the NLK reduces the first-turn action under constrained beam offset and optics conditions. Effective operation additionally requires stable and reproducible first-turn injection trajectories. We develop a compact action–angle framework that expresses NLK dynamics in terms of Courant–Snyder invariants and yields an analytical bound on achievable action reduction. This formulation provides direct design rules for NLK placement, phase advance, injected-beam offset, and kicker field profile. Within this framework, we identify the 8-wire NLK as a practical baseline and extend its design by relaxing the square-geometry constraint, enabling inward shifting of the off-axis field peak while preserving on-axis field and gradient cancellation. Application to the NSLS-II lattice shows how aperture, pulsed-power, and mechanical constraints combine to determine a coupled design solution. Multi-turn tracking confirms that candidate NLK locations maintain sufficient stay-clear (aperture-clearance) margin, while the optimized wire geometry reduces the required current and Lorentz force load. The results establish a unified approach for NLK-assisted injection design and provide a practical pathway for upgrades in diffraction-limited storage rings.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effects of Ho-ion substitution on the magnetic properties of the Ca3Co2O6 frustrated spin-chain compound

Highlights: • A great sensitivity of the Ca{sub 3}Co{sub 2}O{sub 6} magnetic behavior to the presence of magnetic foreign cation are emphasized. • As the Ho content increases the ferrimagnetic configuration becomes less stable; and the antiferromagnetic (AFM) interaction enhances gradually. • Antiferromagnetic coupling interaction between Ho{sup 3+} ions are interpreted, The complex micro-mechanism are discussed in detail. - Abstract: Ho{sup 3+}-ion doped spin-chain compounds Ca{sub 3}Co{sub 2-x}Ho{sub x}O{sub 6} (x = 0, 0.05, 0.1, 0.15) were prepared by a conventional solid-state reaction method. Rietveld refinement of the X-ray diffraction patterns at room temperature confirmed the rhombohedral structure with the R 3-bar c space group. The results reveal that the solid solubility of the Ho element in Ca{sub 3}Co{sub 2}O{sub 6} is in the range of x = 0.1–0.15. Magnetic measurement suggests that with the increased Ho content: (1) the ferromagnetic transition temperature Tc and spin freezing temperature T{sub ƒ} decrease obviously; (2) the ferrimagnetic configuration becomes less stable; (3) the dynamic characteristics become slower; and (4) the antiferromagnetic (AFM) interaction enhances gradually. Based on these phenomena, the mechanism was discussed in detail. The magnetic correlation length is broken at a low Ho{sup 3+}-ion level, and the Ho{sup 3+}-ion pair formation along the chain with a high level of doping was interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

In-Situ SEM High Strain Rate Testing of Large Diameter Micropillars Followed by TEM and EBSD Postmortem Analysis

Background Dislocation dynamic simulations are intended as a tool to understand and predict the mechanical behavior of metallic materials, but its prediction has never been directly verified by experiments due to differences in specimen strain rate and size. Objective In this work, a comprehensive experimental framework is proposed to attempt direct comparison between experiments and discrete dislocation dynamics (DDD) modelling. Methods By integrating high-throughput sample fabrication and a customized testing apparatus, the sample size and strain rate typically employed in DDD simulations are explored experimentally. Constitutive properties such as stress-strain response are measured, and microstructural information is obtained from transmission electron microscopy (TEM) imaging, electron backscatter diffraction (EBSD), and TEM-based orientation mapping. Results Magnesium and copper were selected, as case studies, to demonstrate the newly developed experimental procedure. Measured stress-strain responses for Mg are consistent with those obtained with a miniaturized Hopkison bar experiments. Furthermore, by exploiting the validated workflow, the effect of strain rate on micropillar heterogeneous deformation and associated dislocation plasticity were revealed. Conclusion The work establishes a methodology for the systematic study of not only metals but also other materials and structures at the microscale and high strain rates.

42 ENGINEERING↗
DOE OSTI2025

Thermodynamic and Kinetic Mechanisms Governing the Synthesis of Nickel-Poor Cathodes

A deeper understanding of the thermodynamics and kinetics governing the lithiation and layering mechanisms of NMC cathode materials (LiNixMnyCozO 2 , where x + y + z = 1) offers valuable insights for enhancing synthesis methods and improving cathode performance. By employing atomistic and mesoscale approaches informed by in situ powder X-ray diffraction (PXRD) experiments, critical parameters for comprehending lithiation and layering processes and reaction rates were identified. The mesoscale approach captured the evolution of the phases and crystallite size observed in the in situ PXRD, revealing the differences in reaction rates with the use of different lithium salts and starting precursors. Ab initio molecular dynamics (AIMD) underscored the importance of vacancies and structural defects in promoting ion mobility and facilitating the nucleation of a layered domain. This nucleation disrupts the symmetry of disordered phases, ultimately creating a strained phase that serves as a buffer between layered and disordered regions. The lithiation and layering processes reflect a dynamic balance between the thermodynamic drive for a low-energy layered structure and the kinetic of diffusion, which is influenced by temperature and lithium vacancy concentration. Overall, reaction mechanisms are driven by the inherent defects of the intermediate phase that differ for NMC cathode materials. The lithium salts impact the rates of lithiation and layering, with a much slower process for Li 2 CO 3 .

25 ENERGY STORAGE↗
DOE OSTI2024

Defect-Limited Mobility and Defect Thermochemistry in Mixed A-Cation Tin Perovskites: (CH3NH3)1-xCsxSnBr3

Hybrid organic-inorganic semiconductors crystallizing in the perovskite structure present a significant opportunity for realizing defect-tolerant semiconductors. In this work, we examine the solid solution, (CH3NH3)1-xCsxSnBr3, and identify the thermochemistry dictating the intrinsic carrier concentrations and how local structural distortions influences this electronic behavior. This family of compounds exhibits the expected systematic trend in decreasing optical gap with the cesium to methylammonium A-site mixing ratio, x, in the visible region. However, the carrier mobility, as determined from time-resolved microwave conductivity measurements, trends opposite to that expected from first-principles calculations combined with Boltzmann scattering theory calculations of the carrier mobility. We propose that this is a result of increasing carrier scattering with x in (CH3NH3)1-xCsxSnBr3 due to a significant increase in the carrier density with x. By examining the dependence of the carrier density as a function of x, we infer the compositional-dependence of the average enthalpy and nonconfigurational entropy per defect. While diffraction reveals a cubic aristotypic perovskite structure as a function of x at room temperature, the pair distribution functions obtained from synchrotron X-ray total scattering from these materials are better described by symmetry-adapted displacement modes of the Pm3m crystal structure, which we attribute to a large degree of anharmonic dynamics of the atom positions. This analysis shows that CH3NH3+-rich compositions retain mostly linear Sn-Br-Sn bonding environments through the displacements, while Cs+-rich compositions lead to more significantly bent Sn-Br-Sn environments. We propose that these bent bonding arrangements in Cs-rich compositions yield a higher propensity for defect formation. This also provides a rationale for carrier trapping that gives rise to anomalous microwave transients. Together, these results provide insight into the structure-dynamics-properties relationships in this highly anharmonic system with high amplitude atomic motions and low defect formation energies.

defect thermochemistry↗