Search NASA⌕ Search

SEARCH · Search NASA

Results for “error reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Galilean satellite mutual occultation data processing

Results of processing seven mutual occultation lightcurves are presented. The lightcurves were obtained using the 60-in. telescope (152 cm) at Mt. Wilson to observe six J1 occulting J2 events and one J3 occulting J2 event. Using a uniformly illuminated disk model, local satellite Jovicentric longitude corrections of 675 plus or minus 150 km, 275 plus or minus 240 km, and 1175 plus or minus 350 km for J1, J2, and J3, respectively, were determined. These corrections enabled the event midpoint times to be computed to within 5 sec of the observed midpoint times for all seven events. These longitude corrections have been verified by Pioneer 10 and recent (1973 and 1974) conventional Jovian eclipse observations. A relative J1:J2 out-of-plane error of less than a few hundred kilometers has been indicated; however, it appears that the relative J3:J2 out-of-plane error is larger than 600 km. Deficiencies in both the uniformly illuminated disk model and Sampson's theory of the Galilean satellite motions for the reduction of mutual event data are described.

Duxbury, T. C.↗

Astrometric observations of Saturn's satellites from McDonald Observatory, 1972

Observations of Saturn's satellites have been reduced by means of secondary reference stars obtained by reduction of Palomar Sky Survey plates. This involved the use of 29 SAO stars and plate overlap technique to determine the coordinates of 59 fainter stars in the satellite field. Fourteen plate constants were determined for each of the two PSS plates. Comparison of two plate measurement and reduction techniques on the satellite measures appears to demonstrate the existence of a serious background gradient effect and the utility of microdensitometry to eliminate this error source in positional determinations of close satellites.

Abbot, R. I.↗

DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2 lasers

Atmospheric trace constituent measurements with higher vertical resolution than attainable with passive radiometers are discussed. Infrared differential absorption lidar (DIAL), which depends on Mie scattering from aerosols, has special advantages for tropospheric and lower stratospheric applications and has great potential importance for measurements from shuttle and aircraft. Differential absorption lidar data reduction involves comparing large amplitude signals which have small differences. The accuracy of the trace constituent concentration inferred from DIAL measurements depends strongly on the errors in determining the amplitude of the signals. Thus, the commonly used SNR expression (signal divided by noise in the absence of signal) is not adequate to describe DIAL measurement accuracy and must be replaced by an expression which includes the random coherent (speckle) noise within the signal. A comprehensive DIAL computer algorithm is modified to include heterodyne detection and speckle noise. Examples for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system are given.

Brockman, P.↗

Production of global sea surface temperature fields for the Jet Propulsion Laboratory workshop comparisons

Sea surface temperature (SST) is measured from space by the advanced very high resolution radiometer (AVHRR), scanning multichannel microwave radiometer (SMMR), high resolution infrared sounder (HIRS) and VISSR atmospheric sounder (VAS). Typical accuracies have been reported from 0.5 C regionally to 2.0 C on a global basis. To evaluate the accuracy of the satellite-derived sea surface temperatures, a series of three workshops was organized to provide uniform data reduction and analysis. The analytical techniques used to intercompare satellite and in situ measurements are described in detail. Selected results showed the overall average rms errors were in the range 0.5-1.0 C.

Hilland, J. E.↗

A Full Multi-Grid Method for the Solution of the Cell Vertex Finite Volume Cauchy-Riemann Equations

The system of inhomogeneous Cauchy-Riemann equations defined on a square domain and subject to Dirichlet boundary conditions is considered. This problem is discretised by using the cell vertex finite volume method on quadrilateral meshes. The resulting algebraic problem is overdetermined and the solution is defined in a least squares sense. By this approach a consistent algebraic problem is obtained which differs from the original one by O(h(exp 2)) perturbations of the right-hand side. A suitable cell-based convergent smoothing iteration is presented which is naturally linked to the least squares formulation. Hence, a standard multi-grid algorithm is reported which combines the given smoother and cell-based transfer operators. Some remarkable reduction properties of these operators are shown. A full multi-grid method is discussed which solves the discrete problem to the level of truncation error by employing one multi-grid cycle at each current level of discretisation. Experiments and applications of the full multi-grid scheme are presented.

Borzi, A.↗

Byte-precision level of detail processing for variable precision analytics

I/O bottlenecks in HPC applications are becoming a more pressing problem as compute capabilities continue to outpace I/O capabilities. While double-precision simulation data often must be stored losslessly, the loss of some of the fractional component may introduce acceptably small errors to many types of scientific analyses. Given this observation, we develop a precision level of detail (APLOD) library, which partitions double-precision datasets along user-defined byte boundaries. APLOD parameterizes the analysis accuracy-I/O performance tradeoff, bounds maximum relative error, maintains I/O access patterns compared to full precision, and operates with low overhead. Using ADIOS as an I/O use-case, we show proportional reduction in disk access time to the degree of precision. Finally, we show the effects of partial precision analysis on accuracy for operations such as k-means and Fourier analysis, finding a strong applicability for the use of varying degrees of precision to reduce the cost of analyzing extreme-scale data.

Jenkins, John↗

ANC of Radiated Sound from a Small UAS Rotor using Virtual Error Sensors

Small unmanned aerial systems (UAS) are becoming increasingly common for private, military, and commercial use, increasing community noise exposure. Reducing the noise produced by UAS could help improve community acceptance. Active noise control (ANC) might be used to attenuate noise produced by UAS, however, traditional ANC systems require a physical sensor in the far-field, which is not feasible. This paper assesses a virtual error sensing (VES) method that eliminates the need for a far-field sensor. This paper describes the proposed VES strategy, and presents numerical simulations and experimental results that highlight the benefits and limitations of the approach. Results for the VES system alone and with an ANC approach are presented and discussed. Experimental testing focused on attenuating the tonal noise produced by one 2-bladed rotor with a tip radius of 11.9 cm. Pressure variations caused by blade rotation were measured in the near and far-field using electret microphones and externally polarized condenser microphones, respectively. The filtered-x least mean squares algorithm was used in conjunction with the VES system to attenuate the far-field response. Experimental results show reductions between 6-13 dB at varying far-field locations and rotation rates.

virtual error sensor↗

Reduction of numerical diffusion in three-dimensional vortical flows using a coupled Eulerian/Lagrangian solution procedure

A new approach based on the coupling of an Eulerian and a Lagrangian solver, aimed at reducing the numerical diffusion errors of standard Eulerian time-marching finite-volume solvers, is presented. The approach is applied to the computation of the secondary flow in two bent pipes and the flow around a 3D wing. Using convective point markers the Lagrangian approach provides a correction of the basic Eulerian solution. The Eulerian flow in turn integrates in time the Lagrangian state-vector. A comparison of coarse and fine grid Eulerian solutions makes it possible to identify numerical diffusion. It is shown that the Eulerian/Lagrangian approach is an effective method for reducing numerical diffusion errors.

Felici, Helene M.↗

Reduced order models for Lagrangian hydrodynamics

It is reported, as a mathematical model of high-speed flow and shock wave propagation in a complex multimaterial setting, Lagrangian hydrodynamics is characterized by moving meshes, advection-dominated solutions, and moving shock fronts with sharp gradients. These challenges hinder the existing projection-based model reduction schemes from being practical. We develop several variations of projection-based reduced order model techniques for Lagrangian hydrodynamics by introducing three different reduced bases for position, velocity, and energy fields. A time-windowing approach is also developed to address the challenge imposed by the advection-dominated solutions. Lagrangian hydrodynamics is formulated as a nonlinear problem, which requires a proper hyper-reduction technique. Therefore, we apply the over-sampling DEIM and SNS approaches to reduce the complexity due to the nonlinear terms. Finally, we also present both a posteriori and a priori error bounds associated with our reduced order model. We compare the performance of the spatial and time-windowing reduced order modeling approaches in terms of accuracy and speed-up with respect to the corresponding full order model for several numerical examples, namely Sedov blast, Gresho vortices, Taylor-Green vortices, and triple-point problems.

97 MATHEMATICS AND COMPUTING↗

Control oriented model order reduction for the hydraulic system of an autonomous wheel loader

Control design for an autonomous wheel loader requires a high-fidelity and low-order dynamics model. The objective of order reduction is to decrease the number of states in the model while maintaining performance comparable to the original model. Of all the power components in a wheel loader, the model order reduction for steering and working hydraulic systems is most demanding due to its nonlinear and stiff dynamical nature. This paper describes a physics-inspired model order reduction method that can reduce the model order by close to thirty percent. It is achieved by discarding orders with fast dynamics and consolidating multiple states into less new states. Furthermore, this method can also be extended to other types of off-road vehicles such as excavators, bulldozers, etc. Simulation results demonstrate that the reduced-order model exhibits very similar performance to the full-order model under typical operating conditions of wheel loaders, with an output error of less than six percent.

42 ENGINEERING↗

Robust error calibration for serial crystallography

Serial crystallography is an important technique with unique abilities to resolve enzymatic transition states, minimize radiation damage to sensitive metalloenzymes and perform de novo structure determination from micrometre-sized crystals. This technique requires the merging of data from thousands of crystals, making manual identification of errant crystals unfeasible. cctbx.xfel.merge uses filtering to remove problematic data. However, this process is imperfect, and data reduction must be robust to outliers. We add robustness to cctbx.xfel.merge at the step of uncertainty determination for reflection intensities. This step is a critical point for robustness because it is the first step where the data sets are considered as a whole, as opposed to individual lattices. Robustness is conferred by reformulating the error-calibration procedure to have fewer and less stringent statistical assumptions and incorporating the ability to down-weight low-quality lattices. We then apply this method to five macromolecular XFEL data sets and observe the improvements to each. The appropriateness of the intensity uncertainties is demonstrated through internal consistency. This is performed through theoretical CC 1/2 and I /σ relationships and by weighted second moments, which use Wilson's prior to connect intensity uncertainties with their expected distribution. This work presents new mathematical tools to analyze intensity statistics and demonstrates their effectiveness through the often underappreciated process of uncertainty analysis.

Mittan-Moreau, David W.↗

Comparison of Spectral Radiance Calibration Techniques Used for Backscatter Ultraviolet Satellite Instruments

Methods for determining the absolute radiometric calibration sensitivities of backscatter ultraviolet (BUV) satellite instruments are compared as part of an effort to minimize pre-launch calibration errors. An internally illuminated integrating sphere source has been used for the Shuttle Solar BUV (SSBUV), Total Ozone Mapping Spectrometer (TOMS), Ozone Mapping Instrument (OMI), and Global Ozone Monitoring Experiment 2 (GOME-2) using standardized procedures traceable to national standards. These sphere-based sensitivities agree to within three percent [k equals 2] relative to calibrations performed using an external diffuser illuminated by standard irradiance sources, the customary radiance calibration method for BUV instruments. The uncertainty for these calibration techniques as implemented at the NASA Goddard Space Flight Centers Radiometric Calibration and Development Laboratory is shown to be 4 percent at 250nm [k equals 2] when using a single traceable calibration standard. Significant reduction in the uncertainty of nearly 1 percent is demonstrated when multiple calibration standards are used.

residual errors↗

Tuning Bifunctional Oxygen Electrocatalysts by Changing the A-Site Rare-Earth Element in Perovskite Nickelates

Perovskite-structured (ABO 3 ) transition metal oxides are promising bifunctional electrocatalysts for efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). In this paper, we investigate a set of epitaxial rare earth nickelates (RNiO 3 ) thin films with controlled A-site isovalent substitution to correlate their structure and physical properties with ORR/OER activities. The ORR activity is shown to decrease monotonically with decreasing the A-site element ionic radius which lowers the conductivity of the RNiO 3 (R = La, La 0.5 Nd 0.5 , La 0.2 Nd 0.8 , Nd, Nd 0.5 Sm 0.5 , Sm, Gd) films, with LaNiO 3 being the most conductive and active. On the other hand, the OER activity initially increases upon substituting La with Nd and is maximal at La 0.2 Nd 0.8 NiO 3 , in which oxygen vacancies (VOs) start to form. Moreover, the OER activity remains comparable within error through Sm-doped NdNiO 3 . Beyond that, we cannot reliably measure activity due to the potential voltage drop across the film. The improved OER activity is ascribed to the partial reduction of Ni 3+ to Ni 2+ as a result of VOs, which increases the average occupancy of the e g antibonding orbital to more than one. Our work highlights the importance of tuning A-site elements as an effective strategy for balancing the ORR and OER activities of bifunctional electrocatalysts.

36 MATERIALS SCIENCE↗

SAR Speckle Noise Reduction Using Wiener Filter

Synthetic aperture radar (SAR) images are degraded by speckle. A multiplicative speckle noise model for SAR images is presented. Using this model, a Wiener filter is derived by minimizing the mean-squared error using the known speckle statistics. Implementation of the Wiener filter is discussed and experimental results are presented. Finally, possible improvements to this method are explored.

Joo, T. H.↗

Robust system size reduction of discrete fracture networks: a multi-fidelity method that preserves transport characteristics

In this paper, we propose a multi-fidelity system reduction technique that uses weighted graphs paired with three-dimensional discrete fracture network (DFN) modelling for efficient simulation of subsurface flow and transport in fractured media. DFN models are used to simulate flow and transport in subsurface fractured rock with low-permeability. One method to alleviate the heavy computational overhead associated with these simulations is to reduce the size of the DFN using a graph representation of it to identify the primary flow sub-network and only simulate flow and transport thereon. The first of these methods used unweighted graphs constructed solely on DFN topology and could be used for accurate predictions of first-passage times. However, these techniques perform poorly when predicting later stages of the mass breakthrough. We utilize a weighted-graph representation of the DFN where edge weights are based on hydrological parameters in the DFN that allows us to exploit the kinematic quantities derivable a posteriori from the flow solution obtained on the graph representation of the DFN to perform system reduction and predict the later stages of the breakthrough curve with high fidelity. We also propose and demonstrate the use of an adaptive pruning algorithm with error control that produces a pruned DFN sub-network whose predicted mass breakthrough agrees with the original DFN within a user-specified tolerance. Lastly, the method allows for the level of accuracy to be a user-controlled parameter.

58 GEOSCIENCES↗

C3MechLite: An integrated component library of compact kinetic mechanisms for low-carbon, carbon neutral and zero-carbon fuels

Based on our latest detailed chemical reaction mechanism, C3MechV4.0, we have developed two reduced reaction mechanisms—C3MechLite and C3MechCore—targeting C 0 –C 3 chemical species including NH 3 . C3MechLite (61 species), contains a number of species comparable to GRI-Mech (53 species), that can accurately predict the combustion characteristics of hydrogen, carbon monoxide, ammonia, methane, natural gas, nitrogen oxides, and their mixtures for a wide range of conditions. C3MechCore (118 species) targets a more comprehensive range of C 0 –C 3 fuels, including ammonia, methanol, ethanol, and dimethyl ether. Both mechanisms demonstrate predictive accuracy comparable to C3MechV4.0 for the combustion characteristics of the target fuels. C3MechLite is designed with a component library structure, enabling further reduction in mechanism size depending on the fuel(s) of interest for 2D/3D numerical simulations. Various combinations of component libraries were validated, and the average prediction error remains within 1 % compared to C3MechLite. Furthermore, the mechanism was applied to 3D LES simulations of H 2 lifted flames and was confirmed to reproduce flame characteristics with high accuracy. C3MechLite and its component library structure enable high-fidelity and computationally efficient chemical kinetic mechanisms, paving the way for application in more complex combustion simulations.

Ammonia↗

Quantifying Progress Across Different CMIP Phases With the ESMValTool

Abstract More than 40 model groups worldwide are participating in the Coupled Model Intercomparison Project Phase 6 (CMIP6), providing a new and rich source of information to better understand past, present, and future climate change. Here, we use the Earth System Model Evaluation Tool (ESMValTool) to assess the performance of the CMIP6 ensemble compared to the previous generations CMIP3 and CMIP5. While CMIP5 models did not capture the observed pause in the increase in global mean surface temperature between 1998 and 2013, the historical CMIP6 simulations agree well with the observed recent temperature increase, but some models have difficulties in reproducing the observed global mean surface temperature record of the second half of the twentieth century. While systematic biases in annual mean surface temperature and precipitation remain in the CMIP6 multimodel mean, individual models and high‐resolution versions of the models show significant reductions in many long‐standing biases. Some improvements are also found in the vertical temperature, water vapor, and zonal wind speed distributions, and root‐mean‐square errors for selected fields are generally smaller with reduced intermodel spread and higher average skill in the correlation patterns relative to observations. An emerging property of the CMIP6 ensemble is a higher effective climate sensitivity with an increased range between 2.3 and 5.6 K. A possible reason for this increase in some models is improvements in cloud representation resulting in stronger shortwave cloud feedbacks than in their predecessor versions.

Bock, L.↗

Trajectory-Estimation Error Analysis

Orbital and Geodetic Parameter Estimation Error Analysis Program (ORAN) is Bayesian least-squares simulation program for orbital trajectories. ORAN does not process data; rather, computes accuracy of results of data reduction if measurements are processed by minimum-variance data-reduction program. Actual data used to provide time when given measurement was available and estimated noise on that measurement.

Putney, B.↗