Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Electronic Scanning Strategies in Adaptive Electrical Capacitance Volume Tomography: Tradeoffs and Prospects

Electrical Capacitance Volume Tomography (ECVT) has been applied for imaging of multiphase flows found in industrial applications. The ill-posed nature of the image reconstruction problem in ECVT and the consequent low resolution can be alleviated by employing electronic scanning enabled by electrode segmentation and reconfiguration during data acquisition. Here we study electronic scanning strategies that mimic physical rotation and shifting of the sensor along its symmetry axis. First, we study the feasibility of electronic scanning by analyzing the capacitance transducer circuit in SPICE. Then, we simulate electronic scanning using the finite element method for different electrode shapes, for which we compare the image reconstruction results and acquisition time. We find a noticeable improvement in image resolution for the scanning cases over conventional ECVT. Lastly, among the scanning cases, we emphasize a particular electrode shape that provides the best image resolution along with the minimal amount of acquisition time.

47 OTHER INSTRUMENTATION↗

Study of hypervelocity projectile impact on thick metal plates

Hypervelocity impacts generate extreme pressure and shock waves in impacted targets that undergo severe localized deformation within a few microseconds. These impact experiments pose unique challenges in terms of obtaining accurate measurements. Similarly, simulating these experiments is not straightforward. This paper proposed an approach to experimentally measure the velocity of the back surface of an A36 steel plate impacted by a projectile. All experiments used a combination of a two-stage light-gas gun and the photonic Doppler velocimetry (PDV) technique. The experimental data were used to benchmark and verify computational studies. Two different finite-element methods were used to simulate the experiments: Lagrangian-based smooth particle hydrodynamics (SPH) and Eulerian-based hydrocode. Both codes used the Johnson-Cook material model and the Mie-Grüneisen equation of state. Experiments and simulations were compared based on the physical damage area and the back surface velocity. Finally, the results of this study showed that the proposed simulation approaches could be used to reduce the need for expensive experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simple strategy for the simulation of axially symmetric large-area metasurfaces

Metalenses are composed of nanostructures for focusing light and have been widely explored in many exciting applications. However, their expanding dimensions pose simulation challenges. We propose a method to simulate metalenses in a timely manner using vectorial wave and ray tracing models. We sample the metalens’s radial phase gradient and locally approximate the phase profile by a linear phase response. Each sampling point is modeled as a binary blazed grating, employing the chosen nanostructure, to build a transfer function set. The metalens transmission or reflection is then obtained by applying the corresponding transfer function to the incoming field on the regions surrounding each sampling point. Fourier optics is used to calculate the scattered fields under arbitrary illumination for the vectorial wave method, and a Monte Carlo algorithm is used in the ray tracing formalism. We validated our method against finite-difference time domain simulations at 632 nm, and we were able to simulate metalenses larger than 3000 wavelengths in diameter on a personal computer.

Martins, Augusto (ORCID:0000000295546481)↗

Memory-Efficient Simulation of Frequency-Dependent Q

Memory-variable methods have been widely applied to approximate frequency-independent quality factor Q in numerical simulation of wave propagation. The frequency-independent model is often appropriate for frequencies up to about 1 Hz but at higher frequencies is inconsistent with some regional studies of seismic attenuation. We apply the memory-variable approach to frequency-dependent Q models that are constant below, and follow a power-law above, a chosen transition frequency. We present numerical results for the corresponding memory-variable relaxation times and weights, obtained by nonnegative least-squares fitting of the Q(f) function, for a range of exponent values; these times and weights can be scaled to an arbitrary transition frequency and a power-law prefactor, respectively. The resulting memory-variable formulation can be used with numerical wave-propagation solvers based on methods such as finite differences (FDs) or spectral elements and may be implemented in either conventional or coarse-grained form. In the coarse-grained approach, we fit effective Q for low-Q values (<200) using a nonlinear inversion technique and use an interpolation formula to find the corresponding weighting coefficients for arbitrary Q. A 3D staggered-grid FD implementation closely approximates the frequency–wavenumber solution to both a half-space and a layered model with a shallow dislocation source for Q as low as 20 over a bandwidth of two decades. We compare the effects of different power-law exponents using a finite-fault source model of the 2008 Mw 5.4 Chino Hills, California, earthquake and find that Q(f) models generally better fit the strong-motion data than the constant Q models for frequencies above 1 Hz.

Geochemistry & Geophysics↗

Design of a Nanophotonic Hybrid Coupler

This project aims to design and simulate a nanophotonic hybrid coupler for detecting vacuum ultraviolet (VUV) light with higher efficiency. VUV light is of significant interest because of its applications ranging from high energy physics to space science and electronic industry. However, current VUV photodetectors have very low efficiencies because most materials absorb in the VUV region (100-200 nm). To address this challenge, I have designed a plasmonic-dielectric coupler with wavelength shifting properties, enabling high Purcell enhancement and far-field confinement. The coupler consists of a cylindrical cSi resonator on top of a thin ZnO layer, and Ag and SiO2 are used as substrates. Simulations are done using the finite-difference time domain method to solve Maxwell’s equations, and specifically with Meep and Lumerical. The effectiveness of the coupler is characterized by the Purcell factor and far-field radiation. The Purcell factor reaches a maximum near 390 nm and is in the o rder of 10^4. Furthermore, the coupler also allows partial control of the directionality of the far-field radiation. With the presence of the resonator, the radiation is directed towards the coupled metalens. Overall, our design combines the advantages of plasmonic and dielectric couplers, along with the intrinsic wavelength shifting properties of materials to enhance VUV detection significantly, and such a device can be used in, for example, the DUNE project.

Zhou, Jiayang↗

Implementation of Perturbation Theory and Sensitivity Capabilities in Griffin

Griffin is a Multiphysics Object-Oriented Simulation Environment (MOOSE) based reactor Multiphysics analysis application, jointly developed by Argonne and Idaho National Laboratories under the DOE-NE NEAMS program. This fiscal year, capabilities for reactivity and sensitivity evaluation using perturbation methods were implemented and verified. The First Order Perturbation Method (FOPT) was employed to compute reactivity worth resulting from small perturbations in input parameters, while the Generalized Perturbation Theory (GPT) was used to evaluate sensitivities of a range of response types, including reaction rate ratio, k-eigenvalue, neutron generation time, and effective delayed neutron fraction. These perturbation methods enable users to quantify how response quantities change due to a perturbation in a input parameter without explicitly performing an additional transport simulation for each perturbed state. In particular, the GPT formulation accounts for indirect effects arising from flux changes by solving generalized inhomogeneous equations, for which a Neumann series-based iterative solution method was developed and implemented in Griffin. The implemented reactivity and sensitivity evaluation capabilities were verified using two test problems: an infinite homogeneous system and a two-dimensional hexagonal core. The results showed excellent agreement with reference solutions obtained by a direct method based on finite difference approximation as well as GPT-based results from the PERSENT code, confirming the accuracy of both reactivity and sensitivity evaluations. Additionally, preliminary uncertainty quantification (UQ) results were obtained by combining the sensitivity values computed using GPT and external covariance data, demonstrating that the implemented sensitivity results can be reliably used for uncertainty calculations. To further demonstrate the generality and practical strength of the implementation, the sensitivity evaluation capability was successfully applied to the Empire microreactor with a geometrically complex design that poses significant modeling challenges. The results confirm that Griffin enables sensitivity evaluations even for irregular and highly heterogeneous reactor configurations, thereby establishing a foundation for UQ applications in advanced reactor designs and analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Jet-shock interactions.

Finite difference scheme from method of characteristics to investigate flow field and intersecting exhaust plumes from nozzles

Mourer, J.↗

Flow field analysis of aircraft configurations using a numerical solution to the three-dimensional unified supersonic/hypersonic small disturbance equations, part 1

The unified small disturbance equations are numerically solved using the well-known Lax-Wendroff finite difference technique. The method allows complete determination of the inviscid flow field and surface properties as long as the flow remains supersonic. Shock waves and other discontinuities are accounted for implicity in the numerical method. This technique was programed for general application to the three-dimensional case. The validity of the method is demonstrated by calculations on cones, axisymmetric bodies, lifting bodies, delta wings, and a conical wing/body combination. Part 1 contains the discussion of problem development and results of the study. Part 2 contains flow charts, subroutine descriptions, and a listing of the computer program.

Gunness, R. C., Jr.↗

View factor computer program (program view) user's manual

The purpose of program VIEW is to compute view factors between specified surfaces and to be compatible with level 15.5 of the NASTRAN structural analysis program. Program VIEW is a modification of a (finite element) view factor computation program called RAVFAC. VIEW is designed to run on an IBM System/360 operating under OS (operating system), with a minimum region size of 110 K bytes. The actual computation of view factors is still performed exactly as it was in the original version of RAVFAC. In developing VIEW, RAVFAC was modified to satisfy the following compatibility requirements: (1) accept finite element input which can also be used as input to NASTRAN, (2) produce output (view factors) in a format which can be used as input to NASTRAN, and (3) follow NASTRAN program design so that in the future VIEW can be incorporated into NASTRAN as a subroutine. The VIEW program permits computation of the view factors between surfaces, taking into account the presence of any intermediate surfaces. VIEW also computes these view factors either by contour integration or by finite difference (double summation) methods.

Puccinelli, E. F.↗

A Computer Program for Calculating Three-Dimensional Compressible Laminar and Turbulent Boundary Layers on Arbitrary Wings

A computer program for calculating three dimensional compressible laminar and turbulent boundary layers on arbitrary wings is described and presented. The computer program consists of three separate programs, namely, a geometry program to represent the wing analytically, a velocity program to compute the external velocity components from a given experimental pressure distribution and a finite difference boundary layer method to solve the governing equations for compressible flows. To illustrate the usage of the computer program, three different test cases are presented and the preparation of the input data as well as the computed output data is discussed in some detail.

Cebeci, T.↗

A split-recoupled-semidirect computational technique applied to transonic flow over lifting airfoils

A new version of the semidirect iterative method eliminates significant restrictions of previous versions of the method. A semidirect method solves finite-difference equations by a rapid globally implicit iterative process driven by a fast direct elliptic solver. The new approach can treat complex systems of equations in an efficient 'correction form', and allows the use of general, nonorthogonal, boundary-fitted coordinate transformations. These features are expected to lead to significant practical applications with conservation-equation systems in either two or three dimensions. The present application to the full potential equations for steady transonic flow over an airfoil at angle of attack illustrates the utility of the technique.

Martin, E. D.↗

Recent sidewall boundary-layer investigations with suction in the Langley 0.3-m Transonic Cryogenic Tunnel

An experimental and theoretical study of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT) sidewall boundary-layer with and without suction, has been made. Without suction, the boundary-layer displacement thickness at a station ahead of the model varied from about 1.6 mm to 1.3 mm over a Reynolds number range of 20 million to 200 million per m at Mach numbers from 0.30 to 0.76. Measured velocity profiles were correlated using the defect law of Hama. The boundary-layer displacement thickness decreased when suction was applied; however, after suction of about 2 percent of test section mass flow, the change in the thickness was small. A comparison of the measured suction effectiveness with finite difference and integral methods of boundary-layer calculation showed that both methods predicted the right trend over the range of suction velocities (up to a suction to free-stream velocity ratio of -0.02).

Murthy, A. V.↗

Studies of sidewall boundary layer in the Langley 0.3 meter transonic cryogenic tunnel with and without suction

Boundary layer measurements on the sidewalls of the Langley 0.3 Meter Transonic Cryogenic Tunnel were made to determine the effectiveness of the passive boundary layer bleed system over a Reynolds number range from 20 to 200 x 10 to the sixth power per meter at Mach numbers from 0.30 to 0.76. The tunnel sidewall boundary layer displacement thickness was about 2 percent of the width of the test section without the boundary layer bleed. Measured velocity profiles correlated well with the defect law of Hama. With the boundary layer bleed equivalent to about 2 percent of the test section mass flow, the boundary layer displacement thickness reduced to about 1 percent of the test section width, which is generally considered acceptable for testing airfoils. It was also noticed that effectiveness of the bleed was nearly independent of the Mach number and Reynolds number over the range of conditions tested. A comparison of the measured suction effectiveness of the bleed with the finite difference and integral methods of boundary layer calculation showed good agreement.

Murthy, A. V.↗

Surface deformation and geoid anomalies over single and double-layered convective systems

Using a primitive variable formulation of the finite-element method, the differences in the surface observables, such as topography and geoid, produced by single- and double-layered thermal convection, were compared. Both constant and depth-dependent viscosities have been considered. For the same Rayleigh number, larger surface perturbations are produced by single-cell convection. For the same Nusselt number, the magnitudes of the surface observables are greater for double-layered convection. For the same surface heat-flux, surface topographies have similar magnitudes, but the relative amplitudes of geoid anomalies depend greatly on the style of viscosity stratification. This difference in the geoid between the two systems increases with greater surface heat-flow, regardless of viscosity structure.

Koch, M.↗

Numerical simulation of excited jet mixing layers

A numerical simulation of unsteady flow in jet mixing layers, both with and without external excitation, has been performed by solving the time-dependent compressible Navier-Stokes equations. Computations were performed on a CRAY X-MP computer using MacCormick's explicit finite difference algorithm. Different excitation methods were investigated and were shown to be very effective in controlling the well organized periodic production, shedding and pairing of large scale vortex structures. It is found that pressure excitation was generally more effective than temperature excitation, and that grid refinement results in substantial improvement in the resolution of unsteady features. The location and orientation, in addition to the frequency, of the excitation source are shown to have a significant influence on the production and interaction of large scale vortex structures in the jet mixing layer.

Scott, J. N.↗

Numerical simulation of the vortical flow over a round-edged double-delta wing

Simulations of three-dimensional vortical flows over a thin double-delta wing with an aspect ratio of 2.05 have been performed. Steady-state solutions to the unsteady incompressible Navier-Stokes equations are obtained using a new implicit upwind-relaxation finite-difference scheme. The method is second-order accurate spatially and naturally dissipative. Numerical results indicate that key features of both vortical interaction and vortex breakdown are successfully simulated. The computed lift coefficients and lateral trajectories of the vortical cores are in good agreement with the experimental data.

Hsu, C.-H.↗

Electromagnetic scattering analysis on a hypercube parallel architecture

The applicability of a parallel architecture to the solution of large electromagnetic scattering problems is demonstrated. Two techniques, finite difference and the method of moments, are used to provide insight into the comparative speedups which can be attained for several algorithms. The flexibility of the hypercube architecture for different analysis algorithms is illustrated.

Patterson, Jean E.↗