Search NASA⌕ Search

SEARCH · Search NASA

Results for “function composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

The effects of optical phonon on the binding energy of bound polaron in a wurtzite ZnO/Mg{sub x}Zn{sub 1–x}O quantum well

An improved Lee-Low-Pines intermediate coupling method is used to study the energies and binding energies of bound polarons in a wurtzite ZnO/Mg{sub x}Zn{sub 1–x}O quantum well. The contributions from different branches of long-wave optical phonons, i.e., confined optical phonons, interface optical phonons, and half-space optical phonons are considered. In addition to electron-phonon interaction, the impurity-phonon interaction, and the anisotropy of material parameters, such as phonon frequency, electron effective mass, and dielectric constant, are also included in our computation. Ground-state energies, binding energies and detailed phonon contributions from various phonons as functions of well width, impurity position and composition are presented. Our result suggests that total phonon contribution to ground state and binding energies in the studied wurtzite ZnO/Mg₀.₃Zn₀.₇O quantum wells varies between 28–23 meV and 62–45 meV, respectively, which are much larger than the corresponding values (about 3.2–1.8 meV and 1.6–0.3 meV) in GaAs/Al₀.₃Ga₀.₇As quantum wells. For a narrower quantum well, the phonon contribution mainly comes from interface and half-space phonons, for a wider quantum well, most of phonon contribution originates from confined phonons. The contribution from all the phonon modes to binding energies increases slowly either when impurity moves far away from the well center in the z direction or with the increase in magnesium composition (x). It is found that different phonons have different influences on the binding energies of bound polarons. Furthermore, the phonon contributions to binding energies as functions of well width, impurity position, and composition are very different from one another. In general, the electron-optical phonon interaction and the impurity center-optical phonon interaction play an important role in electronic states of ZnO-based quantum wells and cannot be neglected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Use of Amino‐Functionalized CNTs and CVD Grown CNTs for Better Dispersion in Al Powder in the Fabrication of Composites

We report an improved process for the better dispersion of multiwalled carbon nanotubes (MWCNTs) in Al powder used for the fabrication of Al‐matrix composites employing powder metallurgy process. For obtaining a better dispersion of MWCNTs in Al, we used two types of MWCNTs. In the first type, the MWCNTs were firstly functionalized by using ammonium bi‐carbonate and mix with Al powder using a high energy ball mill in the presence of a process control agent. In the second type we grew MWCNTs directly on Al powder using CVD. Various mechanical properties of the composites including micro hardness, compressive strength etc. were determined. It has been observed that using functionalized MWCNTs (fCNTs) and CVD grown MWCNTs, these properties were found to enhance significantly. The dispersion of functionalized CNTs was studied by SEM and the interfacial bonding between functionalized CNTs and Al matrix using high resolution transmission electron microscopy (HRTEM).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NiMo-ceria-zirconia-based anode for solid oxide fuel cells operating on gasoline surrogate

A multi-functional NiMo-ceria-zirconia composite was developed as an anode for a solid oxide fuel cell (SOFC) running on isooctane that is a commonly used model fuel for gasoline. The anode layer was fabricated on an electrolyte-supported single cell using yttria-stabilized zirconia (YSZ) as the electrolyte and La0.6Sr0.4Co0.2Fe0.8O3-d as the cathode. Our results indicated that the single NiMo-ceria-zirconia layer possessed a dual-functionality: the first function was to internally convert complex hydrocarbons into a synthesis gas and the second function was to electrochemically oxidize the synthesis gas mixture for electric power generation. The addition of Mo to the Ni-ceria-zirconia allowed direct conversion of isooctane in SOFC. It significantly suppressed carbon deposition in the anode and improved the lifetime of a single cell. Additionally, the presence of Mo in the Ni-ceria-zirconia anode appeared to facilitate a higher degree of sintering, which increased the electrical conductivity and maximum power density of the single cell. When operating on isooctane at 800 °C, single cell with the 5 wt.% Mo in the Ni-ceria-zirconia-based anode displayed a maximum power density of 212 mW cm-2 at 0.48V which was higher than that of a single cell with the Ni-YSZ-based anode without the Mo promoter (49 mW cm-2 at 0.48 V).

NiMo-Ceria-Zirconia composite, Single layer multif↗

A soil-inspired dynamically responsive chemical system for microbial modulation

Interactions between the microbiota and their colonized environments mediate critical pathways from biogeochemical cycles to homeostasis in human health. Here, in this study, we report a soil-inspired chemical system that consists of nanostructured minerals, starch granules and liquid metals. Fabricated via a bottom-up synthesis, the soil-inspired chemical system can enable chemical redistribution and modulation of microbial communities. We characterize the composite, confirming its structural similarity to the soil, with three-dimensional X-ray fluorescence and ptychographic tomography and electron microscopy imaging. We also demonstrate that post-synthetic modifications formed by laser irradiation led to chemical heterogeneities from the atomic to the macroscopic level. The soil-inspired material possesses chemical, optical and mechanical responsiveness to yield write-erase functions in electrical performance. The composite can also enhance microbial culture/biofilm growth and biofuel production in vitro. Finally, we show that the soil-inspired system enriches gut bacteria diversity, rectifies tetracycline-induced gut microbiome dysbiosis and ameliorates dextran sulfate sodium-induced rodent colitis symptoms within in vivo rodent models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silicone-containing composition

A silicone-containing composition comprises the reaction product of a first component and an excess of an isocyanate component relative to the first component to form an isocyanated intermediary. The first component is selected from one of a polysiloxane and a silicone resin. The first component includes a carbon-bonded functional group selected from one of a hydroxyl group and an amine group. The isocyanate component is reactive with the carbon-bonded functional group of the first component. The isocyanated intermediary includes a plurality of isocyanate functional groups. The silicone-containing composition comprises the further reaction product of a second component, which is selected from the other of the polysiloxane and the silicone resin. The second component includes a plurality of carbon-bonded functional groups reactive with the isocyanate functional groups of the isocyanated intermediary for preparing the silicone-containing composition.

36 MATERIALS SCIENCE↗

A computational study of the effects of graphene additions on electrical properties of polycrystalline copper

The addition of graphene has recently shown promise as a route for the significant improvement of the bulk electrical properties of metallic materials. Here, we explore the effects these additions have on the net electrical conductivity of fabricated copper-graphene (Cu-Gr) nanocomposites as a function of grain structure and grain boundary properties. Synthetic 3D microstructures were generated to represent polycrystalline copper with different average grain diameters and twinned grain boundary fractions. Then, the Poisson equation of electrical transport was solved using a finite difference method in order to predict the net electrical conductivity of each microstructure. In this context, the potential effect of graphene on the conductivity of the composite was evaluated as a function of the number of affected grain boundaries. The results of these calculations indicate that 1.) as supported by literature, net electrical conductivity decreases with decreasing grain size, 2.) the presence of twinned grain boundaries results in smaller loss of conductivity than would otherwise be expected, and 3.) the presence of graphene on the grain boundaries can be expected to lead to improvements in net electrical conductivity. However, we also find that 4.) when the Cu grain structure becomes sufficiently refined, the addition of graphene could conceivably result in significant improvements in electrical conductivity over and above coarse-grained Cu. It is estimated from our calculations that, assuming microstructures with average grain sizes between 100 nm and 100 μm and graphene conductivity 1000 to 10,000 that of a typical Cu grain boundary, an improvement in electrical conductivity of approximately 17% over that of bulk Cu may be attainable. Therefore, by performing this study we suggest a possible route for the improvement of Cu electrical properties through the addition of graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Oxide–Metal Interactions During Hot Isostatic Pressing to Diffusion Bond Aluminum Alloy 6061 Plates

The interaction between Mg, Si, and Al 2 O 3 during hot isostatic pressing diffusion bonding of aluminum alloy 6061 (AA6061) plates was investigated through thermodynamic calculations and experimental microstructural characterization. Thermodynamic calculations as functions of temperature, pressure, and composition revealed that the interaction among Mg, Si, and Al 2 O 3 yields Mg 2 Si and either MgO + Al or MgAl 2 O 4 + Al, facilitating the reduction of Al 2 O 3 and allowing Al/Al metallic bonds to form. Total pressure variation had a negligible influence on the oxygen partial pressure, and consequently, the reaction product formation. Oxygen partial pressure variation as a function of temperature and initial amount of Al 2 O 3 determined the formation of either MgO or MgAl 2 O 4 . Experimental Hot Isostatic Pressure (HIP) bonding at 723 K and 833 K under a constant pressure of 1017 atm documented the cooling rate-dependent formation of β–Mg 2 Si precipitates. High-resolution transmission electron microscopy imaging and selected area electron diffraction patterns verified the formation of β–Mg 2 Si and MgO at the interface but did not detect MgAl 2 O 4 . In conclusion, findings from this study clarify the role of thermochemical interactions in oxide disruption and bonding mechanisms during HIP diffusion bonding of AA6061 and provide guidance for optimizing joining processes for monolithic nuclear fuel assemblies.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Molecular transformations of phenolic SOA during photochemical aging in the aqueous phase: competition among oligomerization, functionalization, and fragmentation

Abstract. Organic aerosol is formed and transformed in atmospheric aqueous phases (e.g., cloud and fog droplets and deliquesced airborne particles containing small amounts of water) through a multitude of chemical reactions. Understanding these reactions is important for a predictive understanding of atmospheric aging of aerosols and their impacts on climate, air quality, and human health. In this study, we investigate the chemical evolution of aqueous secondary organic aerosol (aqSOA) formed during reactions of phenolic compounds with two oxidants – the triplet excited state of an aromatic carbonyl (3C∗) and hydroxyl radical (•OH). Changes in the molecular composition of aqSOA as a function of aging time are characterized using an offline nanospray desorption electrospray ionization mass spectrometer (nano-DESI MS) whereas the real-time evolution of SOA mass, elemental ratios, and average carbon oxidation state (OSC) are monitored using an online aerosol mass spectrometer (AMS). Our results indicate that oligomerization is an important aqueous reaction pathway for phenols, especially during the initial stage of photooxidation equivalent to ∼ 2 h irradiation under midday winter solstice sunlight in Northern California. At later reaction times functionalization (i.e., adding polar oxygenated functional groups to the molecule) and fragmentation (i.e., breaking of covalent bonds) become more important processes, forming a large variety of functionalized aromatic and open-ring products with higher OSC values. Fragmentation reactions eventually dominate the photochemical evolution of phenolic aqSOA, forming a large number of highly oxygenated ring-opening molecules with carbon numbers (nC) below 6. The average nC of phenolic aqSOA decreases while average OSC increases over the course of photochemical aging. In addition, the saturation vapor pressures (C∗) of dozens of the most abundant phenolic aqSOA molecules are estimated. A wide range of C∗ values is observed, varying from < 10−20 µg m−3 for functionalized phenolic oligomers to > 10 µg m−3 for small open-ring species. The detection of abundant extremely low-volatile organic compounds (ELVOC) indicates that aqueous reactions of phenolic compounds are likely an important source of ELVOC in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Modifying the composition of hydrogen-terminated silicon nanoparticles synthesized in a nonthermal rf plasma

Hydrogen-terminated silicon nanoparticles were synthesized over a broad range of conditions in a continuous flow, nonthermal rf plasma. The effects of three operating parameters--rf power, reactor pressure, and hydrogen flow rate--were examined in terms of their effects on particle crystallinity, size, and surface composition. Silicon-hydrogen composition was characterized in situ by Fourier transform infrared spectrometry, and particle structural morphology was examined with a transmission electron microscope. Amorphous or crystalline particles could be synthesized by appropriately adjusting the operating parameters. Over the majority of settings examined, the minimum power required to produce discrete crystalline particles was {approx}20-30 W. Depending on the parameter settings, particles also exhibited hydrogen coverage ranging from predominantly monohydride (SiH) functional groups to more complex compositions of higher hydrides. Particles with the highest proportion of surface SiH bonds were consistently synthesized in the smallest diameter (4 mm i.d.) tube reactor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconductor-to-metallic flipping in a ZnFe{sub 2}O{sub 4}–graphene based smart nano-system: Temperature/microwave magneto-dielectric spectroscopy

Zn-(FeO{sub 2}){sub 2}–graphene smart nano-composites were synthesized using a novel modified solvothermal synthesis with different percentages of graphene. The structure of the nanocomposite was confirmed through X-ray diffraction, micro-Raman scattering spectroscopy, Ultraviolet–Visible spectroscopy, and Fourier transform infrared spectroscopy. The structural growth and morphological aspects were analyzed using scanning/transmission electron microscopy, revealing marvelous micro-structural features of the assembled nano-system resembling a maple leaf. To determine the composition, energy dispersive spectroscopy and X-ray photoelectron spectroscopy were used. Microwave magneto-dielectric spectroscopy revealed the improved dielectric properties of the nano-composite compared to those of the parent functional nanocrystals. Temperature gradient dielectric spectroscopy was used over the spectral range from 100 Hz to 5 MHz to reveal the phenomenological effect that the nanosystem flips from its usual semiconductor nature to a metallic nature with sensing temperature. Electrical conductivity and dielectric analysis indicated that the dielectric loss and the dielectric permittivity increased at room temperature. This extraordinary switching capability of the functionalized graphene nanosystem opens up a new dimension for engineering advanced and efficient smart composite materials. - Graphical abstract: Display Omitted - Highlights: • Zn-(FeO{sub 2}){sub 2}–graphene smart nano-composites were synthesized using a novel modified solvothermal synthesis. • The synthesized nano-system exhibits marvelous leaf like microstructure. • These nano-composites show improved magneto dielectric response. • This engineered smart nano-system shows phenomenological flipping from semiconductor like nature to metallic behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design new epoxy nanocomposite coatings based on metal vanadium oxy-phosphate M 0.5 VOPO 4 for anti-corrosion applications

Epoxy nanocomposite coatings are an essential way to protect petroleum storage tanks from corrosion. For this purpose, the new nanocomposite epoxy coatings (P-M/epoxy composites) have been successfully designed. The P-M/epoxy composites are based on the metal vanadium oxy-phosphate M 0.5 VOPO 4 (where M = Mg, Ni, and Zn). The function of P-M/epoxy composites as anti-corrosion coatings was explored using electrochemical and mechanical tests. Using electrochemical impedance spectroscopy (EIS), it has been noticed that the pore resistance and polarization resistance of the P-M/epoxy composites remain higher as compared to the neat epoxy. The P-M/epoxy composites have the greatest impact on the cathodic dis-bonded area and water absorption. Besides, P-M/epoxy composites exhibit a very high order of mechanical properties. Further, Mg 0.5 VOPO 4 has the greatest effect on the anti-corrosion properties of epoxy coating followed by Zn 0.5 VOPO 4 and Ni 0.5 VOPO 4 . All these properties lead to developing effective anti-corrosion coatings. Thus, the net result from this research work is highly promising and provides a potential for future works on the anti-corrosion coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decoupling copolymer, lipid and carbon nanotube interactions in hybrid, biomimetic vesicles

Bilayer vesicles that mimic a real biological cell can be tailored to carry out a specific function by manipulating the molecular composition of the amphiphiles. These bio-inspired and bio-mimetic structures are increasingly being employed for a number of applications from drug delivery to water purification and beyond. Complex hybrid bilayers are the key building blocks for fully synthetic vesicles that can mimic biological cell membranes, which often contain a wide variety of molecular species. While the assembly and morpholgy of pure phospholid bilayer vesicles is well understood, the functionality and structure dramaticlly changes when copolymer and/or carbon nanotube porins (CNTP) are added. The aim of this study is to understand how the collective molecular interactions within hybrid vesicles affect their nanoscale structure and properties. In situ small and wide angle X-ray scattering (SAXS/WAXS) and molecular dynamics simulations (MD) are used to investigate the morphological effect of molecular interactions between polybutadiene polyethylene oxide, lipids and carbon nanotubes (CNT) within the hybrid vesicle bilayer. Within the lipid/copolymer system, the hybrid bilayer morphology transitions from phase separated lipid and compressed copolymer at low copolymer loadings to a mixed bilayer where opposing lipids are mostly separated from the inner region. This transition begins between 60 wt% and 70 wt%, with full homogenization observed by 80 wt% copolymer. The incorporation of CNT into the hybrid vesicles increases the bilayer thickness and enhances the bilayer symmetry. Analysis of the WAXS and MD indicate that the CNT–dioleoyl interactions are much stronger than the CNT–polybutadiene.

59 BASIC BIOLOGICAL SCIENCES↗

Microwave-driven synthesis and modification of nanocarbons and hybrids in liquid and solid phases

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.

25 ENERGY STORAGE↗

Dissimilar Tendencies of Innovative Green Clay Organo-Modifier on the Final Properties of Poly(ε-caprolactone) Based Nanocomposites

Composites based on poly(ε-caprolactone) (PCL) were prepared by melt blending the polymer with natural and modified bentonite. Soy lecithin (SL), a natural and nontoxic biosurfactant, was used as modifier agent. Three organoclays with different SL contents were employed as fillers and composites containing 1 and 2 wt% of each clay, were prepared. Thermal (by thermogravimetric analysis, and differential scanning calorimetry), morphological (by X-ray diffraction (XRD) and melt rheology), mechanical (by tensile tests) and barrier properties (by means of water vapor permeability tests) of matrix and composites were studied as a function of clay type and content. Morphological analysis by XRD showed nanocomposites with intercalated-exfoliated structures while melt rheology suggests thermal degradation of PCL matrix catalyzed by SL bentonite modifier. Thermal and mechanical properties were consistent with this assumption, due to the slight increment in crystallinity percentage and detriment in the Young’s modulus of the nanocomposites in comparison with the neat matrix. On the other hand, water vapor permeability of PCL significantly decreased in composites, as is expected for polymer/clay nanocomposites, favoring its potential application as food packaging. Thus, dissimilar tendencies were found in the final properties of the nanocomposites that were attributed to the matrix molecular weight degradation catalyzed by the novel green clay organo-modifier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Solid State Phase Transformation in Continuously Heated and Cooled Ferritic Weld Metal

Arc welding processes involve cooling rates that vary over a wide range (1-100 K/s). The final microstructire is thus a product of the heating and cooling cycles experienced by the weld in addition to the weld composition. It has been shown that the first phase to form under weld cooling conditions may not be that predicted by equilibrium calculations. The partitioning of different interstitial/substitutional alloying elements at high temperatures can dramatically affect the subsequent phase transformations. In order to understand the effect of alloying on phase transformation temperatures and final microstructures time-resolved X-ray diffraction technique has been successfully used for characterization. The work by Jacot and Rappaz on pearlitic steels provided insight into austenitization of hypoeutectic steels using a finite volume model. However there is very little work done on the effect of heating and cooling rates on the phase transformation paths in bainitic/martensitic steels and weld metals. Previous work on a weld with higher aluminum content, deposited with a FCAW-S process indicated that even at aluminum levels where the primary phase to solidify from liquid should be delta ferrite, non-equilibrium austenite was observed. The presence of inhomogeneity in composition of the parent microstructure has been attributed to differences in transformation modes, temperatures and microstructures in dual-phase, TRIP steels and ferritic welds. The objectives of the work included the identification of the stability regions of different phases during heating and cooling, differences in the effect of weld heating and cooling rates on the phase transformation temperatures, and the variation in phase fractions of austenite and ferrite in the two phase regions as a function of temperature. The base composition used for the present work is a Fe-1%Al-2%Mn-1%Ni-0.04%C weld metal. A pseudo-binary phase diagram shows the expected solidification path under equilibrium conditions. However, the effect of heating and cooling rates on the phase transformation path due to non-equilibrium partitioning of alloying elements cannot be predicted by equilibrium phase diagrams. Also, it is unclear if there is retention of delta ferrite to room temperature due to compositional or thermal effects. This would dramatically affect the austenite to ferrite transformation due to carbon and nitrogen enrichment in the austenite.

36 MATERIALS SCIENCE↗

Carbon isotopic signatures of super-deep diamonds mediated by iron redox chemistry

Among redox sensitive elements, carbon is specifically important because it may have been a driver rather than a passive recorder of Earth’s redox evolution. The extent to which the isotopic composition of carbon records the redox processes that shaped the Earth is still debated. In particular, the highly reduced deep mantle may be metal-saturated, yet, it is still unclear how the presence of metallic phases influences the carbon isotopic compositions of super-deep diamonds. Here we report ab initio results for the vibrational properties of carbon in carbonates, diamond, and Fe 3 C under pressure and temperature conditions relevant to super-deep diamond formation. Previous work on this question neglected the effect of pressure on the equilibrium carbon isotopic fractionation between diamond and Fe 3 C but our calculations show that this assumption overestimates the fractionation by a factor of ~1.3. Our calculated probability density functions for the carbon isotopic compositions of super-deep diamonds derived from metallic melt can readily explain the very light carbon isotopic compositions observed in some super-deep diamonds. Our results therefore support the view that metallic phases are present during the formation of super-deep diamonds in the mantle below ~250 km.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗