Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Vacuum-ultraviolet absorption cross-sections of functionalized cyclic hydrocarbons: Five-membered rings

Cross-sections were measured at 50 °C and 800 Torr using differential absorption spectroscopy in the vacuum-ultraviolet from 5.17 – 9.92 eV for a series of five-membered cyclic hydrocarbons: cyclopentane, cyclopentene, methylcyclopentane, tetrahydrofuran, furan, 2-methyltetrahydrofuran, 2,3-dihydro-5-methylfuran, tetrahydrofuran-3-one, 2-methyl-1,3-dioxolane, cyclopentanol, 2-hydroxytetrahydrofuran, cyclopentanone, 2-cyclopenten-1-one, 3-cyclopenten-1-one, 2-methylcyclopentan-1-one, 2-methylcyclopent-2-en-1-one, 1,2-epoxycyclopentane, 2,3-epoxycyclopentanone, and 3,4-epoxycyclopentanone. The majority of the species are functionalized and are directly related to chain-reactions relevant to combustion, such as substituted cyclic ethers and cycloalkenes. Uncertainty calculations were conducted as a function of photon energy to quantify errors associated with experimental repeatability, signal-to-noise ratio, and gas-phase concentration, yielding an upper limit of 5% in spectral regions where absorption is >2%. Here, the primary objective of the present work is to provide quantitative absorption cross-sections of species commonly produced in combustion reactions. Comparing qualitative differences among the five-membered cyclic species, in order to analyze the effect of functional groups on absorption, is a secondary objective. The majority of the spectra are reported for the first time and enable quantitative isomer-resolved speciation measurements in combustion chemistry.

74 ATOMIC AND MOLECULAR PHYSICS↗

Synthesis, characterization and formation process of transition metal oxide nanotubes using carbon nanofibers as templates

Mono and binary transition metal oxide nanotubes could be synthesized by the immersion of carbon nanofiber templates into metal nitrate solutions and removal of the templates by heat treatment in air. The transition metal oxide nanotubes were composed of nano-crystallites of metal oxides. The functional groups on the carbon nanofiber templates were essential for the coating of these templates: they acted as adsorption sites for the metal nitrates, ensuring a uniform metal oxide coating. During the removal of the carbon nanofiber templates by calcination in air, the metal oxide coatings promoted the combustion reaction between the carbon nanofibers and oxygen. - Graphical abstract: Mono and binary transition metal-oxide nanotubes could be synthesized by the immersion of carbon nanofiber templates into metal nitrate solutions and removal of the templates by heat treatment in air.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Application of Brazilian kaolinite clay as adsorbent to removal of U(VI) from aqueous solution: Kinetic and thermodynamic of cation-basic interactions

The compound N{sup 1}-[3-(trimethoxysilyl)propyl]diethylenetriamine was anchored onto Amazon kaolinite surface by heterogeneous route. The modified and natural kaolinite samples were characterized by transmission electron microscopy, scanning electron microscopic, X-ray diffraction, and nuclear magnetic nuclei of {sup 29}Si and {sup 13}C. The well-defined peaks obtained in the {sup 13}C NMR spectrum in the 5.0-62.1 ppm region confirmed the attachment of organic functional groups as pendant chains bonded into the porous clay. The ability of these materials to remove U(VI) from aqueous solution was followed by a series of adsorption isotherms adjusted to a Sips equation at room temperature and pH 4.0. The kinetic parameters analyzed by the Lagergren and Elovich models gave a good fit for a pseudo-second order reaction with k{sub 2} values 16.0 and 25.1 mmol g{sup -1} min{sup -1} ranges for natural and modified kaolinite clays, respectively. The energetic effects caused by metal ion adsorption were determined through calorimetric titrations. - Graphical abstract: This investigation reports the use of original and modified kaolinites as alternative absorbents. The compound N-[3-trimethoxysilyl)propyl]diethylenetriamine was anchored onto Amazon kaolinite surface by heterogeneous route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An in situ oxidation route to fabricate graphene nanoplate-metal oxide composites

We report our studies on an improved soft chemical route to directly fabricate graphene nanoplate-metal oxide (Ag{sub 2}O, Co{sub 3}O{sub 4}, Cu{sub 2}O and ZnO) composites from the in situ oxidation of graphene nanoplates. By virtue of H{sup +} from hydrolysis of the metal nitrate aqueous solution and NO{sub 3}{sup -}, only a small amount of functional groups were introduced, acting as anchor sites and consequently forming the graphene nanoplate-metal oxide composites. The main advantages of this approach are that it does not require cumbersome oxidation of graphite in advance and no need to reduce the composites due to the lower oxidation degree. The microstructures of as-obtained metal oxides on graphene nanoplates can be dramatically controlled by changing the reaction parameters, opening up the possibility for processing the optical and electrochemical properties of the graphene-based nanocomposites. - graphical abstract: An improved soft chemical route to directly fabricate graphene nanoplate-metal oxide composites is reported from the in situ oxidation of graphene nanoplates. Highlights: > An improved soft chemical route to directly fabricate graphene nanoplate-metal oxide composites. > The microstructures can be controlled by changing the reaction parameters. > It does not require oxidation of graphite in advance and no need to reduce the composites due to the lower oxidation degree.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of ester and amide derivatives of titanium(IV) carboxymethylphosphonate

A set of layered ester and amide derivatives of titanium(IV) carboxymethylphosphonate was prepared by solvothermal treatment of amorphous titanium(IV) carboxymethylphosphonate with corresponding 1-alkanols, 1,ω-alkanediols, 1-aminoalkanes, 1,ω-diaminoalkanes and 1,ω-amino alcohols and characterized by powder X-ray diffraction, IR spectroscopy and thermogravimetric analysis. Whereas alkyl chains with one functional group form bilayers tilted to the layers, 1,ω-diaminoalkanes and most of 1,ω-alkanediols form bridges connecting the adjacent layers. In the case of amino alcohols, the alkyl chains form bilayer and either hydroxyl or amino group is used for bonding. This simple method for the synthesis of ester and amide derivatives does not require preparation of acid chloride derivative as a precursor or pre-intercalation with alkylamines and can be used also for the preparation of ester and amide derivatives of titanium carboxyethylphosphonate and zirconium carboxymethylphosphonate. - Graphical abstract: Ester and amide derivatives of layered titanium carboxymethylphosphonate were prepared by solvothermal treatment of amorphous solid with alkanol or alkylamine. - Highlights: • Ester and amide derivatives of titanium carboxymethylphosphonate. • Solvothermal treatment of amorphous solid with alkanol or alkylamine. • Ester and amide formation confirmed by IR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and controlled release properties of 2,4-dichlorophenoxy acetate–zinc layered hydroxide nanohybrid

Direct reaction of ZnO with 2,4-dichlorophenoxyacetic acid (24D) solutions of different concentrations allows obtaining new organic–inorganic nanohybrid materials formed by intercalation of 24D into interlayers of zinc layered hydroxide (ZLH). XRD patterns show a progressive evolution of the structure as 24D concentration increases. The nanohybrid obtained at higher 24D concentration (24D–ZLH(0.4)) reveals a well ordered layered structure with two different basal spacings at 25.2 Å and 24 Å. The FTIR spectrum showing the vibrations bands of the functional groups of 24D and of the ZLH confirms the intercalation. SEM images are in agreement with the structural evolution observed by XRD and reveal the ribbon morphology of the nanohybrids. The release studies of 24D showed a rapid release of 94% for the first 100 min governed by the pseudo-second order kinetic model. - Graphical abstract: The phenomenon indicates that the optical energy gap is enlarged with the increase of molar concentrations in 2,4-dichlorophenoxy acetate anion content into ZnO to create a ZLH–24D nanohybrid. - Highlights: • Nanohybrid was synthesized from 2,4-dichlorophenoxy acetate with-Zinc LHD, using wet chemistry. • Characterized using SEM, TEM, EDX, FTIR, XRD and TGA. • Ribbon-shaped 24D–Zn-layered hydroxide nanoparticles with (003) diffractions of 2.5 nm phase were synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of surface chemistry of mesoporous silica materials and solution pH on kinetics of molsidomine adsorption

Adsorption kinetics of molsidomine on mesoporous silica material (UMS), the phenyl- (PhMS) and mercaptopropyl-functionalized (MMS) derivatives from solution with different pH and 298 K was studied. The adsorption kinetics was found to follow the pseudo-second-order kinetic model for all studied silica materials and pH. Effects of surface functional groups and pH on adsorption efficiency and kinetic adsorption parameters were investigated. At all studied pH, the highest molsidomine amount is adsorbed on PhMS due to π–π interactions and hydrogen bonding between surface groups of PhMS and molsidomine molecules. An increase of pH results in a decrease of the amounts of adsorbed molsidomine onto the silica materials. Furthermore, the highest adsorption rate kinetically evaluated using a pseudo-second-order model, is observed onto UMS and it strongly depends on pH. The mechanism of the adsorption process was determined from the intraparticle diffusion and Boyd kinetic film–diffusion models. The results showed that the molsidomine adsorption on the silica materials is controlled by film diffusion. Effect of pH on the diffusion parameters is discussed. - Graphical abstract: The kinetic study showed that the k{sub 2} value, the rate constant of pseudo-second order kinetic model, is the highest for molsidomine adsorption on UMS and strongly depends on pH because it is determined by availability and accessibility of the reaction sites of the adsorbents molsidomine binding. Display Omitted - Highlights: • The adsorption capacities of UMS, PhMS and MMS were dependent on the pH. • At all studied pH, the highest molsidomine amount is adsorbed on PhMS. • The highest adsorption rate, k{sub 2}, is observed onto UMS and strongly depends on pH. • Film diffusion was the likely rate-limiting step in the adsorption process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and utilization of a novel carbon nanotubes supported nanocables for the adsorption of dyes from aqueous solutions

Using multiwalled carbon nanotubes(MWCNTs) as mechanical support and glucose as carbon resource, a hydrothermal carbonization route was designed for the synthesis of MWCNTs@carbon nanocables with tunable diameter and length. MWCNTs are firstly used as templates for the formation of carbon-rich composite nanocables, and the diameter of the nanocables could be tailored through adjusting the hydrothermal time or the ratio of MWCNTs and glucose. Owing to abundant superficial oxygen-containing functional groups, porous surface and remarkable reactivity, the as-synthesized nanocables are capable of efficiently adsorbing cationic dye methylene blue (MB) and crystal violet (CV). Furthermore, the optimum adsorption conditions, kinetics, adsorption isotherms and adsorption thermodynamics of dyes were studied systematically. Additionally, the maximum adsorption capacities calculated from data analysis (298.5 mg/g for MB and 228.3 mg/g for CV) are significant higher than those of raw MWCNTs and some other adsorbents reported previously, which provides strong evidence for using MWCNTs@carbon nanocables as adsorbent to remove dyes from aqueous solutions. - Graphical abstract: MWCNTs@carbon nanocables has been successfully fabricated by a hydrothermal carbonization method. The as-synthesized novel samples were used as adsorbents and exhibited high adsorption capacity on MB and CV. - Highlights: • A simple, cost-effective and “green” method for the synthesis of the material. • The diameter and length of the material are relatively easy to control. • The surface has large oxygen-containing groups and preferable chemical reactivity. • Compared with raw MWCNTs and some other adsorbents, the adsorption capacity is much high.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel reduction synthesis of the graphene/Mn{sub 3}O{sub 4} nanocomposite for supercapacitors

Graphene/Mn{sub 3}O{sub 4} nanocomposite is successfully synthesized from graphene oxide (GO)/MnO{sub 2} precursor using dilute hydrazine hydrate assisted hydrothermal reaction (DAH method). X-ray photoelectron spectroscopy (XPS) and Raman characterizations confirm the decrease of oxygen-containing functional groups of GO. The results indicate that GO have been reduced to graphene to a large degree to increase the electronic conductive channels. The morphology and the phase transformation of MnO{sub 2} can be ascribed to the “dissolution-recrystallization” mechanism. Such nanocomposite, as electrode material for supercapacitor, exhibits a high specific capacitance of 326.9 F g{sup −1}, almost 4 times that of GO/MnO{sub 2} precursor (81.3 F g{sup −1}). The good cycle stability of 94.6% capacitance retention after 1000 cycles, can be explained by the firm interfacial cohesion between graphene and Mn{sub 3}O{sub 4} nanoparticle. This soft chemical DAH process could be readily extended to the preparation of other classes of hybrids. - Graphical abstract: The phase transition can be explained by the “dissolution-recrystallization” model. The GO/MnO{sub 2} precursor is reduced into graphene/Mn{sub 3}O{sub 4} by the DAH process, and the electrochemical property is dramatically enhanced. - Highlights: • Graphene/Mn{sub 3}O{sub 4} nanocomposite is firstly synthesized successfully from GO/MnO{sub 2} precursor. • The phase transformation from MnO{sub 2} to Mn{sub 3}O{sub 4} has occurred. • The specific capacitance of the graphene/Mn{sub 3}O{sub 4} (326.9 F/g) is 4 times that of GO/MnO{sub 2} precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium carbonate formation on mica supported extracellular polymeric substance produced by Rhodococcus opacus

Extracellular polymeric substance (EPS) extracted from Rhodococcus opacus bacterial strain was used as a matrix for calcium carbonate precipitation using the vapour diffusion method. The total exopolymer and water-soluble exopolymer fraction of different concentrations were spread on the mica surface by the spin-coating method. The obtained layers were characterized using the atomic force microscopy measurement and XPS analysis. The effects of polymer concentration, initial pH of calcium chloride solution and precipitation time on the obtained crystals properties were investigated. Raman spectroscopy and scanning electron microscopy were used to characterize the precipitated minerals. It was found that the type of precipitated CaCO{sub 3} polymorph and the crystal size depend on the kind of EPS fraction. The obtained results indicates that the water soluble fraction favours vaterite dissolution and calcite growth, whereas the total EPS stabilizes vaterite and this effect is stronger at basic pH. It seems to be due to different contents of the functional group of EPS fractions. - Highlights: • CaCO{sub 3} crystal size and polymorph can be controlled by EPS substance obtained from R. opacus. • The water soluble fraction favours vaterite dissolution and calcite growth. • The total EPS stabilizes vaterite. • This effect is stronger at basic pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electroless nickel – phosphorus coating on crab shell particles and its characterization

Being hydrophilic material, crab shell particles have only a limited number of applications. It is, therefore, necessary to modify the surface of the crab shell particles. To make them useful ever for the applications, the main theme we proposed in this article is to utilize crab shell particles (CSP) with the core coated with nickel phosphorus (NiP) as a shell using the electroless coating process. For dealing with serious environmental problems, utilization of waste bio-shells is always an important factor to be considered. Chelating ability of crab shell particles eliminates the surface activation in this work proceeding to the coating process. The functional group, phase structure, microstructure, chemical composition and thermal analysis of CSP and NiP/CSP were characterized using Fourier transform infra-red spectroscopy (FTIR), x-ray diffraction analyzer (XRD), scanning electron microscope (SEM), energy-dispersive x-ray spectroscopy (EDS), and thermogravimetric analysis (TGA). The combination of an amorphous and crystalline structure was exhibited by CSP and NiP/CSP. NiP/CSP has shown a better thermal stability when compared to uncoated CSP. Stability test, adsorption test, and conductivity test were conducted for the study of adsorption behavior and conductivity of the particles. CSP presented a hydrophilic property in contrast to hydrophobic NiP/CSP. NiP/CSP presented a conductivity of about 44% greater compared to the CSP without any fluctuations. - Highlights: • Utilization of crab shell waste is focused on. • NiP coating on crab shell particle is fabricated using electroless process. • Thermal analysis, stability test, adsorption test and conductivity test were done. • Organic matrix of crab shell particle favors the coating process. • Results demonstrate the characterization of CSP core – NiP shell structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Immobilizing of ZIF-8 derived ZnO with controllable morphologies on zeolite A for efficient photocatalysis

ZIF-8@Zeolite A (ZIF-8@Z) catalysts were successfully prepared by sonochemical synthesizing method using metal organic frameworks as precursors and zeolite A as support. Then, ZIF-8@Z catalysts were transformed into ZnO@Zeolite A (ZnO@Z) photocatalysts by calcining at different temperatures to remove the organic functional groups of ZIF-8. All samples were characterized by XRD, SEM, BET and UV–vis diffuse reflectance spectra respectively. SEM images show that ZIF-8 nanoparticles were tightly loaded on the surface of zeolite A. The XRD patterns exhibit that ZIF-8 was transformed into ZnO. The photocatalysis of ZnO@Z was investigated by degradation of rhodamine B (RhB) aqueous solution under UV light and ZnO@Z exhibited rapider photodegradation of RhB than porous ZnO derived from ZIF-8. The degradation of RhB reveals that ZnO@Z, calcined at 550 °C for 5 h, (ZnO@Z550) shows the highest photocatalytic efficiency (99.4%). - Graphical abstract: Schematic Illustration of the Preparation of the ZnO@Z via Sonochemical Synthesis. Display Omitted - Highlights: • Hybrid structure of ZIF-8 derived ZnO loaded on Zeolite A is first obtained. • ZnO@Z hybrid show higher photocatalytic activity on RhB than ZnO. • The preparation is facile, cheap and easily to scale-up.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boron doped diamond synthesized from detonation nanodiamond in a C-O-H fluid at high pressure and high temperature

Boron doped diamond (BDD) was synthesized under high pressure and high temperature (HPHT) of 7 GPa, 1230 °C in a short time of 10 s from a powder mixtures of detonation nanodiamond (DND), pentaerythritol C{sub 5}H{sub 8}(OH){sub 4} and amorphous boron. SEM, TEM, XRD, XPS, FTIR and Raman spectroscopy indicated that BDD nano- and micro-crystals have formed by consolidation of DND particles (4 nm in size). XRD showed the enlargement of crystallites size to 6–80 nm and the increase in diamond lattice parameter by 0.02–0.07% without appearance of any microstrains. Raman spectroscopy was used to estimate the content of boron atoms embedded in the diamond lattice. It was found that the Raman diamond peak shifts significantly from 1332 cm{sup −1} to 1290 cm{sup −1} without appearance of any non-diamond carbon. The correlation between Raman peak position, its width, and boron content in diamond is proposed. Hydrogenated diamond carbon in significant amount was detected by IR spectroscopy and XPS. Due to the doping with boron content of about 0.1 at%, the electrical conductivity of the diamond achieved approximately 0.2 Ω{sup −1} cm{sup −1}. Reaction mechanism of diamond growth (models of recrystallization and oriented attachment) is discussed, including the initial stages of pentaerythritol pyrolysis and thermal desorption of functional groups from the surface of DND particles with the generation of supercritical fluid of low-molecular substances (H{sub 2}O, CH{sub 4}, CO, CO{sub 2}, etc.), as well as byproducts formation (B{sub 2}O{sub 3}, B{sub 4}C). - Highlights: • Boron doped diamond BDD synthesized from detonation nanodiamond, C{sub 5}H{sub 8}(OH){sub 4} and boron. • BDD nano/microcrystals are studied by XRD, SEM, TEM, XPS, FTIR, Raman spectroscopy. • Diamond growth and transition to electro-conductive state (0.2 Ω{sup −1} cm{sup −1}) is observed. • Correlations of Raman bands position and width versus boron content are considered. • High-pressure/temperature reaction mechanism (stages, routes, products) is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organosilane-assisted selective etching strategy for fabrication of hollow/rattle-type mesoporous organosilica nanospheres

Highlights: • Effective fabrication of organic hollow/rattle-type mesoporous organosilica. • The addition of CTES could increase the porosity of the materials. • Pore-making agent (CTES) could be removed by alkali treatment without additional step. - Abstract: A facile strategy to fabricate hollow or rattle-type mesoporous silica nanospheres (HMSNs or RMSNs) with organic functional groups and porous shell was developed. Herein, thiol-HMSNs were obtained via treating vinyl-SiO{sub 1.5} @cyano&thiol-SiO{sub 1.5} prepared by using 3-mercaptopropyltrimethoxysilane (MPTMS) as organosilane precursor, vinyltriethoxysilane (VTES) as sacrificial template precursor and cyanoethyltriethoxysilane (CTES) as pore-making agent. In this method, CTES was co-condensed with MPTMS to form hybrid shell and played an important role in the formation of pore structures. When the volume ratio of MPTMS to CTES was 1:1, well-defined thiol-HMSNs with a specific surface area of 295.6 m{sup 2} g{sup −1} and pore volume of 0.51 cm{sup 3} g{sup −1} could be obtained. Moreover, [email protected] could also be synthesized through this method from three-layered structures (thiocyanato-SiO{sub 1.5} @vinyl-SiO{sub 1.5} @cyano&thiol-SiO{sub 1.5}). The as-prepared RMSNs presented good performance for the adsorption of 2, 4-dichloropheno in water. And this selective etching strategy was versatile and might be extended to fabricate more valuable organic hollow/rattle-type composites for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of structures and surface states of the nanodiamond synthesized by detonation

Nanodiamond is a relatively new nanomaterial with broad prospects for application. In this paper, a variety of methods were used to analyze comprehensively the structures and the surface states of the nanodiamond synthesized by detonation, for example, X-ray diffraction (XRD) spectroscopy, energy diffraction spectroscopy (EDS), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy (Raman) and differential scanning calorimeter (DSC). The results show that, the nanodiamond particles are spherical or elliptical in shape. The average grain size is approximately 5 nm. The surfaces of the nanodiamond contain hydroxy, carbonyl, carboxyl, ether-based resin, and other functional groups. The initial oxidation temperature of the nanodiamond in the air is about 550 deg. C, which is lower than that of the bulk diamond.

36 MATERIALS SCIENCE↗

Vinyl monomers-induced synthesis of polyvinyl alcohol-stabilized selenium nanoparticles

A simple wet chemical method has been developed to synthesize selenium nanoparticles (size 100-200 nm), by reaction of sodium selenosulphate precursor with different vinyl monomers, such as acrylamide, N,N'-dimethylene bis acrylamide, methyl methacrylate, sodium acrylate, etc., in aqueous medium, under ambient conditions. Polyvinyl alcohol has been used to stabilize the selenium nanoparticles. Average size of the synthesized selenium nanoparticles can be controlled by adjusting concentration of both the precursors and the stabilizer. Rate of the reaction as well as size of the resultant selenium nanoparticles have been correlated with the functional groups of the different monomers. UV-vis optical absorption spectroscopy, X-ray diffraction, energy dispersive X-rays, differential scanning calorimetry, atomic force microscopy, scanning electron microscopy and transmission electron microscopy techniques have been employed to characterize the synthesized selenium nanoparticles. Gas chromatographic analysis of the reaction mixture established the non-catalytic role of the vinyl monomers, which were found to be consumed during the course of the reaction.

36 MATERIALS SCIENCE↗

Crystal growth, structure and characterizations of a new semiorganic nonlinear optical material-{beta}-Alanine zinc chloride

The title compound, {beta}-alanine zinc chloride-a new semiorganic nonlinear optical crystal was grown by slow evaporation technique. Single crystals of {beta}-alanine zinc chloride have been subjected to X-ray diffraction analysis to determine the crystal structure. The powder X-ray diffractogram of the crystal has also been recorded. The amount of carbon, nitrogen and hydrogen in the crystals was also estimated. Fourier Transform Infrared and Raman spectral measurements have been carried out on the grown crystals in order to identify the functional groups. The presence of hydrogen and carbon in the {beta}-alanine zinc chloride was confirmed by using proton and carbon nuclear magnetic resonance spectral analyses. The percentage of zinc in the crystal was determined by atomic absorption spectroscopy. Optical behavior such as ultraviolet-vis-near infrared transmittance spectrum and second harmonic generation has been investigated. The mechanical strength and thermal behavior of the grown crystal have been analyzed.

36 MATERIALS SCIENCE↗

Effects of porous carbon additives and induced fluorine on low dielectric constant polyimide synthesized with an e-beam

We report the synthesis of a polyimide matrix with a low dielectric constant for application as an intercalation material between metal interconnections in electronic devices. Porous activated carbon was embedded in the polyimide to reduce the dielectric constant, and a thin film of the complex was obtained using the spin-coating and e-beam irradiation methods. The surface of the thin film was modified with fluorine functional groups to impart water resistance and reduce the dielectric constant further. The water resistance was significantly improved by the modification with hydrophobic fluorine groups. The dielectric constant was effectively decreased by porous activated carbon. The fluorine modification also resulted in a low dielectric constant on the polyimide surface by reducing the polar surface free energy. The dielectric constant of polyimide film decreased from 2.98 to 1.9 by effects of porous activated carbon additive and fluorine surface modification.

36 MATERIALS SCIENCE↗