Search NASA⌕ Search

SEARCH · Search NASA

Results for “knowledge representation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Assessment of outdoor radiofrequency electromagnetic field exposure through hotspot localization using kriging-based sequential sampling

In this study, a novel methodology is proposed to create heat maps that accurately pinpoint the outdoor locations with elevated exposure to radiofrequency electromagnetic fields (RF-EMF) in an extensive urban region (or, hotspots), and that would allow local authorities and epidemiologists to efficiently assess the locations and spectral composition of these hotspots, while at the same time developing a global picture of the exposure in the area. Moreover, no prior knowledge about the presence of radiofrequency radiation sources (e.g., base station parameters) is required. After building a surrogate model from the available data using kriging, the proposed method makes use of an iterative sampling strategy that selects new measurement locations at spots which are deemed to contain the most valuable information—inside hotspots or in search of them—based on the prediction uncertainty of the model. The method was tested and validated in an urban subarea of Ghent, Belgium with a size of approximately 1 km{sup 2}. In total, 600 input and 50 validation measurements were performed using a broadband probe. Five hotspots were discovered and assessed, with maximum total electric-field strengths ranging from 1.3 to 3.1 V/m, satisfying the reference levels issued by the International Commission on Non-Ionizing Radiation Protection for exposure of the general public to RF-EMF. Spectrum analyzer measurements in these hotspots revealed five radiofrequency signals with a relevant contribution to the exposure. The radiofrequency radiation emitted by 900 MHz Global System for Mobile Communications (GSM) base stations was always dominant, with contributions ranging from 45% to 100%. Finally, validation of the subsequent surrogate models shows high prediction accuracy, with the final model featuring an average relative error of less than 2 dB (factor 1.26 in electric-field strength), a correlation coefficient of 0.7, and a specificity of 0.96. -- Highlights: • We present an iterative measurement and modeling method for outdoor RF-EMF exposure. • Hotspots are rapidly identified, and accurately characterized. • An accurate graphical representation, or heat map, is created, using kriging. • Random validation shows good correlation (0.7) and low relative errors (2 dB)

61 RADIATION PROTECTION AND DOSIMETRY↗

Integrated Medical Model Project - Overview and Summary of Historical Application

Introduction: The Integrated Medical Model (IMM) Project represents one aspect of NASA's Human Research Program (HRP) to quantitatively assess medical risks to astronauts for existing operational missions as well as missions associated with future exploration and commercial space flight ventures. The IMM takes a probabilistic approach to assessing the likelihood and specific outcomes of one hundred medical conditions within the envelope of accepted space flight standards of care over a selectable range of mission capabilities. A specially developed Integrated Medical Evidence Database (iMED) maintains evidence-based, organizational knowledge across a variety of data sources. Since becoming operational in 2011, version 3.0 of the IMM, the supporting iMED, and the expertise of the IMM project team have contributed to a wide range of decision and informational processes for the space medical and human research community. This presentation provides an overview of the IMM conceptual architecture and range of application through examples of actual space flight community questions posed to the IMM project. Methods: Figure 1 [see document] illustrates the IMM modeling system and scenario process. As illustrated, the IMM computational architecture is based on Probabilistic Risk Assessment techniques. Nineteen assumptions and limitations define the IMM application domain. Scenario definitions include crew medical attributes and mission specific details. The IMM forecasts probabilities of loss of crew life (LOCL), evacuation (EVAC), quality time lost during the mission, number of medical resources utilized and the number and type of medical events by combining scenario information with in-flight, analog, and terrestrial medical information stored in the iMED. In addition, the metrics provide the integrated information necessary to estimate optimized in-flight medical kit contents under constraints of mass and volume or acceptable level of mission risk. Results and Conclusions: Historically, IMM simulations support Science and Technology planning, Exploration mission planning, and ISS program operations by supplying simulation support, iMED data information, and subject matter expertise to Crew Health and Safety and the HRP. Upcoming release of IMM version 4.0 seeks to provide enhanced functionality to increase the quality of risk decisions made using the IMM through a more accurate representation of the real world system.

Myers, J.↗

3D Deep Learning Joint Inversion of Active Seismic Full Waveform and Passive Seismic Traveltime Data for Reservoir Imaging and Uncertainty Quantification

Here, we present deep learning (DL) networks for three-dimensional (3D) joint inversion of active seismic full waveform and passive seismic traveltime data to image reservoirs and their properties and quantify imaging uncertainties. Active seismic full-waveform data can provide high-resolution monitoring images but are collected only intermittently because of their high acquisition cost. In contrast, passive seismic data can be gathered at relatively low cost between regular active surveys, although their imaging quality can be compromised by factors such as low signal-to-noise ratios and limited ray coverage of the target. Although these datasets are routinely acquired together at CO 2 storage sites, their combined inversion within a 3D DL framework has not been previously demonstrated. To our knowledge, this is the first study to address this gap, combining the strength of both data types. For efficient data storage and DL training with large 3D seismic datasets, we use a 3D data matrix in which a random number of passive seismic traveltime data are stored as parabolic envelopes using one-hot encoding and a 3D full-waveform data matrix in which multiple shot gathers are summed. Two network architectures are evaluated: a single-encoder U-Net for single-data type inversion and a dual-encoder U-Net for joint inversion of active and passive seismic data. We also evaluate the single-encoder U-Net for joint inversion by concatenating full-waveform data and traveltime data. We propose a systematic approach for selecting an optimal dropout rate that balances regularization during training and Monte Carlo dropout-based uncertainty quantification during prediction by examining the correlation coefficient between standard deviation and prediction error, along with the training misfit, across a range of dropout rates. 3D DL inversion experiments include five different network configurations, with evaluations under ideal, noisy and dropout-enabled conditions. Both model and data uncertainties are assessed, as well as their combined effects. Across all conditions, the networks consistently predict accurate CO 2 saturation models with low prediction errors, such as a structural similarity index of 0.993 and CO 2 difference of 1.1%. Uncertainty estimates show strong spatial correlation with prediction errors, confirming the effectiveness of the proposed dropout selection approach. The results demonstrate that our DL approach, utilizing compact data representations and appropriate uncertainty quantification, yields accurate subsurface images under various inversion conditions and provides valuable insights into the reliability of predictions.

Um, Evan Schankee [Lawrence Berkeley National Labo↗

Bacterial Population Genetics in a Forensic Context

This report addresses the recent Department of Homeland Security (DHS) call for a Phase I study to (1) assess gaps in the forensically relevant knowledge about the population genetics of eight bacterial agents of concern, (2) formulate a technical roadmap to address those gaps, and (3) identify new bioinformatics tools that would be necessary to analyze and interpret population genetic data in a forensic context. The eight organisms that were studied are B. anthracis, Y. pestis, F. tularensis, Brucella spp., E. coli O157/H7, Burkholderia mallei, Burkholderia pseudomallei, and C. botulinum. Our study focused on the use of bacterial population genetics by forensic investigators to test hypotheses about the possible provenance of an agent that was used in a crime or act of terrorism. Just as human population genetics underpins the calculations of match probabilities for human DNA evidence, bacterial population genetics determines the level of support that microbial DNA evidence provides for or against certain well-defined hypotheses about the origins of an infecting strain. Our key findings are: (1) Bacterial population genetics is critical for answering certain types of questions in a probabilistic manner, akin (but not identical) to 'match probabilities' in DNA forensics. (2) A basic theoretical framework for calculating likelihood ratios or posterior probabilities for forensic hypotheses based on microbial genetic comparisons has been formulated. This 'inference-on-networks' framework has deep but simple connections to the population genetics of mtDNA and Y-STRs in human DNA forensics. (3) The 'phylogeographic' approach to identifying microbial sources is not an adequate basis for understanding bacterial population genetics in a forensic context, and has limited utility, even for generating 'leads' with respect to strain origin. (4) A collection of genotyped isolates obtained opportunistically from international locations augmented by phylogenetic representations of relatedness will not and enzootic outbreaks noted through international outbreak surveillance systems, and 'representative' genetic sequences from each outbreak. (5) Interpretation of genetic comparisons between an attack strain and reference strains requires a model for the network structure of maintenance foci, enzootic outbreaks, and human outbreaks of that disease, coupled with estimates of mutational rate constants. Validation of the model requires a set of sequences from exemplary outbreaks and laboratory data on mutation rates during animal passage. The necessary number of isolates in each validation set is determined by disease transmission network theory, and is based on the 'network diameter' of the outbreak. (6) The 8 bacteria in this study can be classified into 4 categories based on the complexity of the transmission network structure of their natural maintenance foci and their outbreaks, both enzootic and zoonotic. (7) For B. anthracis, Y. pestis, E. coli O157, and Brucella melitensis, and their primary natural animal hosts, most of the fundamental parameters needed for modeling genetic change within natural host or human transmission networks have been determined or can be estimated from existing field and laboratory studies. (8) For Burkholderia mallei, plausible approaches to transmission network models exist, but much of the fundamental parameterization does not. In addition, a validated high-resolution typing system for characterizing genetic change within outbreaks or foci has not yet been demonstrated, although a candidate system exists. (9) For Francisella tularensis, the increased complexity of the transmission network and unresolved questions about maintenance and transmission suggest that it will be more complex and difficult to develop useful models based on currently available data. (10) For Burkholderia pseudomallei and Clostridium botulinum, the transmission and maintenance networks involve complex soil communities and metapopulations about which very little is known. It is not clear that these pathogens can be brought into the inference-on-networks framework without additional conceptual advances. (11) For all 8 bacteria some combination of field studies, computational modeling, and laboratory experiments are needed to provide a useful forensic capability for bacterial genetic inference.

59 BASIC BIOLOGICAL SCIENCES↗

International Governmental Collaboration on Best Practice in Aging Infrastructure Management - 18027

Legacy nuclear sites in the US, UK and Canada are all facing a similar challenge of completing their operational and cleanup missions in parallel in a safe, efficient and cost-effective manner. Compounding the challenge is the fact that many important facilities are old with a significant level of deferred maintenance/capital needs, resulting in the need for a strategic approach to infrastructure management to ensure that maintenance and capital funding is directed at the highest priority items and that neither operations nor ongoing Decontamination and Decommissioning (D and D) activities are compromised. To help address this challenge, a Technical Information Exchange meeting was held in Ottawa, Canada in early June 2017 which brought together responsible parties from; - Government agencies including the UK Nuclear Decommissioning Authority (NDA), US Department of Energy Environmental Management (DOE EM), US National Nuclear Security Administration (NNSA), Atomic Energy of Canada Ltd (AECL) and Canadian Department of Defense - Implementers and other Government entities including Savannah River National Laboratory, Idaho National Laboratory and Canadian Nuclear Laboratories (CNL) - Associations including representation on behalf of the Institute of Asset Management and; - Contractors including Mission Support Alliance, Mott McDonald, and Longenecker and Associates The objective of this meeting was to share information about respective 'best practices' and to begin to develop common approaches to the prioritization and management of aging infrastructure investment across the organizations. The exchange focused on identifying common critical issues which were discussed through a series of presentations and small group discussions. The outcome from the meeting was an improved understanding by all participants of the latest approaches being applied to Infrastructure Asset Management and the formation of four International Working Groups which now meet on a regular (4-6 week) basis to share lessons learned and to develop international best practice in their area of interest. This paper details; - the issues and challenges that were identified during the meeting - how these were assimilated and distilled into discrete areas to enable formation of specific Working Groups - progress made by the Working Groups to date. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Argonne Reactor Code Software Verification and Validation Plan for the Versatile Test Reactor

This Argonne Reactor Code (ARC) software has taken a pivotal role in the design work of the Versatile Test Reactor. The ARC software itself consists of several independent or semiindependent pieces of software that are used in concert to carry out specific analysis and design objectives. In this report, we discuss the validation that is needed for the ARC software overall and discuss available, usable experimental data and how it relates to the VTR project. We also discuss the verification that is required for the ARC software with respect to its usage in the VTR project and give some concrete examples as to what it must accomplish. A list of goals for the verification and validation work are presented as the general procedure that will be implemented for every individual piece of software in ARC. The ARC software has been continuously developed for over 50 years and many of the features used for the VTR project have thus been rigorously tested for accuracy during that timeframe. The ARC software is presently under source code control and undergoes nightly regression testing of not only the individual pieces, but the interconnected aspects that are common to most analysis projects. Its greatest weakness, from a software verification and validation perspective, is both a lack of documentation and outdated documentation. As an example, much of the previous validation work will require contemporary effort to re-evaluate given the updated base data libraries and modifications to the software that have occurred since. This requires new documentation to be produced to support the usage of the software in the VTR project. The bulk of the ARC software is focused on steady state neutronics and TH behavior of a reactor system. In this regard, we have identified the ZPPR, FFTF, and EBR-II programs as the best candidates for sources of validation data for the VTR project. The ZPPR-15 series in the ZPPR program was chosen as it is the best representation of the VTR fuel form and reactor core layout of all of the ZPPR measurements. Additional support for it comes from the fact that most of the data has already been processed into usable ARC models for VTR validation. The FFTF and EBR-II reactors were both functional reactors that provide reactor scale measurements. FFTF is clearly a closer match to VTR and its startup measurements would be a very valuable validation basis. EBR-II has invaluable burnup related measurements that will play a key role in the ARC software validation work. Each piece of ARC software will require a report detailing the software verification. The validation work will be logically split into the results of modeling each identified experimental resource (ZPPR, EBR-II, FFTF). The intended timeline for the VTR project is to have the ARC software verified and validated by the end of fiscal year 2020. This is incumbent on sufficient funding allocated to V&V activities and no change in programmatic priorities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Collaborative Proposal: Improving understanding of the internal structure and dynamics of deep convection using ARM observations and large eddy simulations

Recent observational and large eddy simulation (LES) modeling studies have nearly unanimously supported the view of deep cumulus convection being composed of a series of quasi-spherical bubbles of buoyant air, known as moist thermals. Despite the prevalence of moist thermals in deep convection, a comprehensive theory for the dynamics of these structures is lacking. Most current conceptual models for cumulus convection are based on canonical scaling theories for dry thermals or plumes; however, there is considerable evidence that the behavior of moist thermals differs markedly from these theories. Furthermore, the theoretical basis for most cumulus parameterizations originates from the plume conceptual model, and therefore these parameterizations are inconsistent with the real structure of moist convection. Motivated by the aforementioned knowledge gaps, this “end-to-end” research effort use theory, observations, numerical simulations, and direct improvements to the Zhang-McFarlane (ZM) convection scheme in the global climate Community Atmosphere Model (CAM) to address the following research questions: What key environmental parameters determine whether or not shallow convection will transition into deep convection, in the context of thermal-like updrafts? What factors regulate the size of thermals within cumulus updrafts? How does vertical wind shear influence thermal behavior, and as a consequence, vertical velocity and mass flux profiles and the shallow-to-deep convective transition? What are the critical processes that determine updraft vertical velocities and their connection to the vertical mass flux profile for thermal-like updrafts? Idealized LES modeling will be used in conjunction with theoretical models for the core properties of thermal-like updrafts to better understand key processes that regulate thermal ascent rates and entrainment properties. Thermal-tracking procedures will be used to characterize the behavior of thermals within the LES, and recently developed direct measures of entrainment and detrainment will be used to quantify entrainment/detrainment rates. Building from these results, we will analyze the structure of moist thermals from hemispheric range-height indicator scans taken during the Atmospheric Radiation Measurement Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign, and from “real case” LES of CACTI events. This combined modeling and observational analysis will provide essential validation for the existing body of research on moist thermal dynamics, which is based primarily on modeling studies. With the insight gained from the aforementioned activities, we will modify the Zhang-McFarlane convection scheme to improve its representation of updraft vertical velocity and entrainment rate profiles. These process-level changes will be tested in the Community Atmosphere Model to assess the impact on global climate simulations.

54 ENVIRONMENTAL SCIENCES↗

Online Interactive Platform for COVID-19 Literature Visual Analytics: Platform Development Study

Background Papers on COVID-19 are being published at a high rate and concern many different topics. Innovative tools are needed to aid researchers to find patterns in this vast amount of literature to identify subsets of interest in an automated fashion. Objective We present a new online software resource with a friendly user interface that allows users to query and interact with visual representations of relationships between publications. Methods We publicly released an application called PLATIPUS (Publication Literature Analysis and Text Interaction Platform for User Studies) that allows researchers to interact with literature supplied by COVIDScholar via a visual analytics platform. This tool contains standard filtering capabilities based on authors, journals, high-level categories, and various research-specific details via natural language processing and dozens of customizable visualizations that dynamically update from a researcher’s query. Results PLATIPUS is available online and currently links to over 100,000 publications and is still growing. This application has the potential to transform how COVID-19 researchers use public literature to enable their research. Conclusions The PLATIPUS application provides the end user with a variety of ways to search, filter, and visualize over 100,00 COVID-19 publications.</:p>

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Conformality or confinement: (IR)relevance of topological excitations

What distinguishes two asymptotically-free non-abelian gauge theories on R{sup 4}, one of which is just below the conformal window boundary and confines, while the other is slightly above the boundary and flows to an infrared conformal field theory? In this work, we aim to answer this question for non-supersymmetric Yang-Mills theories with fermions in arbitrary chiral or vectorlike representations. We use the presence or absence of mass gap for gauge fluctuations as an identifier of the infrared behavior. With the present-day understanding of such gauge theories, the mass gap for gauge fluctuations cannot be computed on R{sup 4}. However, recent progress allows its non-perturbative computation on R{sup 3} x S{sup 1} by using either the twisted partition function or deformation theory, for a range of sizes of S{sup 1} depending on the theory. For small number of fermions, N{sub f}, we show that the mass gap increases with increasing radius, due to the non-dilution of monopoles and bions - the topological excitations relevant for confinement on R{sup 3} x S{sup 1}. For sufficiently large N{sub f}, we show that the mass gap decreases with increasing radius. In a class of theories, we claim that the decompactification limit can be taken while remaining within the region of validity of semiclassical techniques, giving the first examples of semiclassically solvable Yang-Mills theories at any size S{sup 1}. For general non-supersymmetric vectorlike or chiral theories, we conjecture that the change in the behavior of the mass gap on R{sup 3} x S{sup 1} as a function of the radius occurs near the lower boundary of the conformal window and give non-perturbative estimates of its value. For vectorlike theories, we compare our estimates of the conformal window with existing lattice results, truncations of the Schwinger-Dyson equations, NSVZ beta function-inspired estimates, and degree of freedom counting criteria. For multi-generation chiral gauge theories, to the best of our knowledge, our estimates of the conformal window are the only known ones.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantitative Representativeness and Constituency of the Long-Term Agroecosystem Research Network and Analysis of Complementarity with Existing Ecological Networks

Abstract Studies conducted at sites across ecological research networks usually strive to scale their results to larger areas, trying to reach conclusions that are valid throughout larger enclosing regions. Network representativeness and constituency can show how well conditions at sampling locations represent conditions also found elsewhere and can be used to help scale-up results over larger regions. Multivariate statistical methods have been used to design networks and select sites that optimize regional representation, thereby maximizing the value of datasets and research. However, in networks created from already established sites, an immediate challenge is to understand how well existing sites represent the range of environments in the whole area of interest. We performed an analysis to show how well sites in the USDA Long-Term Agroecosystem Research (LTAR) Network represent all agricultural working lands within the conterminous United States (CONUS). Our analysis of 18 LTAR sites, based on 15 climatic and edaphic characteristics, produced maps of representativeness and constituency. Representativeness of the LTAR sites was quantified through an exhaustive pairwise Euclidean distance calculation in multivariate space, between the locations of experiments within each LTAR site and every 1 km cell across the CONUS. Network representativeness is from the perspective of all CONUS locations, but we also considered the perspective from each LTAR site. For every LTAR site, we identified the region that is best represented by that particular site—its constituency—as the set of 1 km grid locations best represented by the environmental drivers at that particular LTAR site. Representativeness shows how well the combination of characteristics at each CONUS location was represented by the LTAR sites’ environments, while constituency shows which LTAR site was the closest match for each location. LTAR representativeness was good across most of the CONUS. Representativeness for croplands was higher than for grazinglands, probably because croplands have more specific environmental criteria. Constituencies resemble ecoregions but have their environmental conditions “centered” on those at particular existing LTAR sites. Constituency of LTAR sites can be used to prioritize the locations of experimental research at or even within particular sites, or to identify the extents that can likely be included when generalizing knowledge across larger regions of the CONUS. Sites with a large constituency have generalist environments, while those with smaller constituency areas have more specialized environmental combinations. These “specialist” sites are the best representatives for smaller, more unusual areas. The potential of sharing complementary sites from the Long-Term Ecological Research (LTER) Network and the National Ecological Observatory Network (NEON) to boost representativeness was also explored. LTAR network representativeness would benefit from borrowing several NEON sites and the Sevilleta LTER site. Later network additions must include such specialist sites that are targeted to represent unique missing environments. While this analysis exhaustively considered principal environmental characteristics related to production on working lands, we did not consider the focal agronomic systems under study, or their socio-economic context.

54 ENVIRONMENTAL SCIENCES↗

Laser-Induced Incandescence in Microgravity

Knowledge of soot concentration is important due to its presence and impact upon a wide range of combustion processes ranging from diffusion to premixed flames, laminar to turbulent processes and homogeneous to heterogeneous combustion. Measurement of soot volume fraction (f(sub v)) is essential to discerning its formation and growth. The presence of soot also affects other physical and chemical properties of combustion thereby affecting studies not directly concerned with either its formation or growth, such as radiative heat transfer, CO oxidation and fuel vaporization or pyrolysis rates. Microgravity offers unique opportunities for studying both soot growth and the effect of soot radiation upon flame structure and spread. Spatial scales and residence time scales are greatly extended in 0-g facilitating soot growth studies. With the varied geometries, short duration microgravity test times and time-varying processes there is a demand for measurement of f(sub v) with high spatial and temporal resolution. Laser-induced incandescence (LII) has advanced f(sub v) measurements in many 1-g combustion processes. To create laser-induced incandescence, a pulsed high intensity laser heats soot to incandescence temperatures. Using appropriate spectral and temporal detection conditions, the resulting incandescence can be selectively detected apart from the non-laser-heated soot and flame gases. Theoretical modelling and experiments have shown that the resulting incandescence is representative of f(sub v). Using an intensified array camera and a laser sheet for excitation, one- and two-dimensionally resolved LII images of f(sub v) have been obtained in 1-g. LII has been characterized and developed at NASA-Lewis for soot volume fraction determination in a wide range of 1-g combustion applications. Broadly grouped, the characterization work has included studies of excitation intensity, excitation wavelength and the optimum temporal and spectral detection conditions to enable an accurate representation of soot volume fraction by LII. Tests for special requirements imposed by different combustion processes have been performed in laminar and turbulent diffusion flames, rich sooting premixed flames, single droplet combustion, and other heterogeneous combustion. These studies demonstrated LII's high sensitivity, temporal and spatial capabilities and its geometric versatility. In contrast to the advantages offered to combustion studies by a microgravity environment, advanced diagnostics, specifically those requiring pulsed laser diagnostics have been limited due to the size, weight and power limitations in a low-gravity environment. Reported here are the first demonstrations of LII performed in a microgravity environment. Examples are shown for laminar and turbulent gas-jet diffusion flames in 0-g.

VanderWal, Randy L.↗

Two-stage ignition behavior and octane sensitivity of toluene reference fuels as gasoline surrogate

Current approaches to improve the efficiency of Spark-Ignition (SI) gasoline engines have been focusing on turbocharging, increasing the compression ratio, and pursuing advanced low-temperature combustion concepts. In order to maximize these strategies, it is important to optimize the knock resistance of the fuel, and therefore knowledge of the sensitivity of the ignition process under a wide range of engine operating conditions is required. Octane sensitivity (OS), which is defined as the difference between Research Octane Number (RON) and Motored Octane Number (MON), has been introduced to represent how fuel's ignition reactivity changes relative to the primary reference fuels (n-heptane/iso-octane) within RON/MON conditions. Previous works have indicated that OS is intimately related to low temperature reactivity of the fuel, which can be revealed as two-stage heat release characteristics during an ignition event. Prompted by these findings, in this paper, we investigate the relationship between two-stage ignition behavior and OS, using chemical kinetic simulations of 24 Toluene Reference Fuels (TRFs)/ethanol blends. TRFs are ternary mixtures of n-heptane/iso-octane/toluene, which is capable of capturing aromatic content and positive values of OS of real gasoline fuels. Simulation results show that fuels with weak or no two-stage ignition behavior tend to have high OS, due to their lack of Negative Temperature Coefficient (NTC) effect and high sensitivity in ignition delay time. Leveraging such observations, we develop a correlation between two-stage behavior and OS as an OS prediction method. Two metrics that represent the strength of the two-stage ignition behavior are proposed and used as OS predictors, which are Low Temperature Heat Release percentage (LTHR%) and Heat Release Rate at the end of first stage (HRR inf ) calculated from a simple kinetic simulation. Regression analysis shows a clear trend between decreases in the proposed two-stage behavior metrics and increases in the value of OS of the fuel. We also test the new metric (LTHR%) using simulation results of 0-D reactors with imposed pressure time histories obtained from engine experiments, as well as using different TRF kinetic mechanisms. Here, the results demonstrate the effectiveness of the metric as a representation of the two-stage ignition behavior in practical combustion systems, highlighting the importance of the proposed relationship, and its potential as a simple and effective OS predictor.

30 DIRECT ENERGY CONVERSION↗

Fine-scale landscape characteristics, vegetation composition, and snowmelt timing control phenological heterogeneity across low-Arctic tundra landscapes in Western Alaska

The Arctic is warming at over twice the rate of the rest of the Earth, resulting in significant changes in vegetation seasonality that regulates annual carbon, water, and energy fluxes. However, a crucial knowledge gap exists regarding the intricate interplay among climate, permafrost, and vegetation that generates high phenology variability across extensive tundra landscapes. This oversight has led to significant discrepancies in phenological patterns observed across warming experiments, long-term ecological observations, and satellite and modeling studies, undermining our ability to understand and forecast plant responses to climate change in the Arctic. To address this problem, we assessed plant phenology across three low-Arctic tundra landscapes on the Seward Peninsula, Alaska, using a combination of in-situ phenocam observations and high-resolution PlanetScope CubeSat data. We examined the patterns and drivers of phenological diversity across the landscape by (1) quantifying phenological diversity among dominant plant function types (PFTs) and (2) modeling the interrelations between plant phenology and fine-scale landscape features, such as topography, snowmelt, and vegetation. Our findings reveal that both spring and fall phenology varied significantly across Arctic PFTs, accounting for about 25%–44% and 34%–59% of the landscape-scale variation in the start of spring [SOS] and start of fall [SOF], respectively. Deciduous tall shrubs (e.g. alder and willow) had a later SOS (~7 d behind the mean of other PFTs), but completed leaf expansion (within 2 weeks) considerably faster compared to other PFTs. We modeled the landscape-scale variation in SOS and SOF using Random Forest, which showed that plant phenology can be accurately captured by a suite of variables related to vegetation composition, topographic characteristics, and snowmelt timing (variance explained: 53%–68% for SOS and 59%–82% for SOF). Notably, snowmelt timing was a crucial determinant of SOS, a factor often neglected in most spring phenology models. Our study highlights the impact of fine-scale vegetation composition, snow seasonality, and landscape features on tundra phenological heterogeneity. Improved understanding of such considerable intra-site phenological variability and associated proximate controls across extensive Arctic landscapes offers critical insights for representation of tundra phenology in process models and associated impact assessments with climate change.

54 ENVIRONMENTAL SCIENCES↗

SUPECA kinetics for scaling redox reactions in networks of mixed substrates and consumers and an example application to aerobic soil respiration

Abstract. Several land biogeochemical models used for studying carbon–climate feedbacks have begun explicitly representing microbial dynamics. However, to our knowledge, there has been no theoretical work on how to achieve a consistent scaling of the complex biogeochemical reactions from microbial individuals to populations, communities, and interactions with plants and mineral soils. We focus here on developing a mathematical formulation of the substrate–consumer relationships for consumer-mediated redox reactions of the form A + BE→ products, where products could be, e.g., microbial biomass or bioproducts. Under the quasi-steady-state approximation, these substrate–consumer relationships can be formulated as the computationally difficult full equilibrium chemistry problem or approximated analytically with the dual Monod (DM) or synthesizing unit (SU) kinetics. We find that DM kinetics is scaling inconsistently for reaction networks because (1) substrate limitations are not considered, (2) contradictory assumptions are made regarding the substrate processing rate when transitioning from single- to multi-substrate redox reactions, and (3) the product generation rate cannot be scaled from one to multiple substrates. In contrast, SU kinetics consistently scales the product generation rate from one to multiple substrates but predicts unrealistic results as consumer abundances reach large values with respect to their substrates. We attribute this deficit to SU's failure to incorporate substrate limitation in its derivation. To address these issues, we propose SUPECA (SU plus the equilibrium chemistry approximation – ECA) kinetics, which consistently imposes substrate and consumer mass balance constraints. We show that SUPECA kinetics satisfies the partition principle, i.e., scaling invariance across a network of an arbitrary number of reactions (e.g., as in Newton's law of motion and Dalton's law of partial pressures). We tested SUPECA kinetics with the equilibrium chemistry solution for some simple problems and found SUPECA outperformed SU kinetics. As an example application, we show that a steady-state SUPECA-based approach predicted an aerobic soil respiration moisture response function that agreed well with laboratory observations. We conclude that, as an extension to SU and ECA kinetics, SUPECA provides a robust mathematical representation of complex soil substrate–consumer interactions and can be applied to improve Earth system model (ESM) land models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Digital Twins for Materials

Digital twins are emerging as powerful tools for supporting innovation as well as optimizing the in-service performance of a broad range of complex physical machines, devices, and components. A digital twin is generally designed to provide accurate in-silico representation of the form (i.e., appearance) and the functional response of a specified (unique) physical twin. This paper offers a new perspective on how the emerging concept of digital twins could be applied to accelerate materials innovation efforts. Specifically, it is argued that the material itself can be considered as a highly complex multiscale physical system whose form (i.e., details of the material structure over a hierarchy of material length) and function (i.e., response to external stimuli typically characterized through suitably defined material properties) can be captured suitably in a digital twin. Accordingly, the digital twin can represent the evolution of structure, process, and performance of the material over time, with regard to both process history and in-service environment. This paper establishes the foundational concepts and frameworks needed to formulate and continuously update both the form and function of the digital twin of a selected material physical twin. The form of the proposed material digital twin can be captured effectively using the broadly applicable framework of n-point spatial correlations, while its function at the different length scales can be captured using homogenization and localization process-structure-property surrogate models calibrated to collections of available experimental and physics-based simulation data.

36 MATERIALS SCIENCE↗

NASA Earth Systems Digital Twins (ESDT)

"Similarly to artificial intelligence, which is now revolutionizing many aspects of our daily lives, Earth system digital twin technologies have the potential to revolutionize the way Earth Science research will be conducted in the future, and how results and knowledge from this research will provide information to support decision making and yield impactful societal benefits. An Earth System Digital Twin or ESDT is a dynamic and interactive information system that first provides a digital replica of the past and current states of the Earth or Earth system as accurately and timely as possible; second, allows for computing forecasts of future states under nominal assumptions and based on the current replica; and third, offers the capability to investigate many hypothetical scenarios under varying impact assumptions. In other words, an ESDT provides the integrated What-Now, What-Next, and What-If pictures of the Earth or Earth system, by continuously ingesting newly observed data and by leveraging multiple interconnected models, machine learning as well advanced computing and visualization capabilities. Digital twins have been developed in engineering since 2002, but the interest in digital twins for the Earth domain is more recent and stems from the convergence of several developments: - The huge amount of diverse data that has now been collected continuously for more than 50 years, and that is becoming more and more difficult to access, understand, and utilize. - At the same time, because of climate change and its impacts the information produced by all of this data is becoming of interest to many new non-traditional users for analyzing and predicting various phenomena. - Because of advances in computational and visualization capabilities and the parallel unprecedented development of machine learning (ML), extracting relevant information from these large amounts of data and running complex models faster has become possible. As a result, it is becoming necessary and possible to build intuitive and interactive frameworks that will enable users with various skill levels and/or organizational hierarchy levels to easily access large amounts of targeted information along with the relevant tools and models (Earth system and human activity models), to support them in analyzing and visualizing this information, to help them understand interactions among models, to visualize the potential outcomes of various impacts, and to support decision or policy making. The full power of digital twins is that, through an integrated representation and standardized tools and software technologies, the same digital replica can address the needs of multiple users at various resolutions (spatial and temporal) and for various applications (science, economic, policy, etc.) – “from farmer to scientist”. With all these interests at stake, the challenges of building optimal digital twins are many and complex. The first challenge is to determine if a Digital Twin should be global or local, and multi-domain or thematic. For example, some domains such as Climate or Weather will require a global Digital Twin or Digital Twin capabilities while science areas such as Biodiversity might be more local. We can also envision that multiple thematic ESDTs, e.g., Air Quality, Wildfires, Hydrology could be federated or provide input to other ESDTs, either on a regional level or to a more global ESDT. Overall, we can imagine a future “web” of Digital Twins co-existing in a hierarchy or in a network, and capable of being connected or federated depending on the needs. This last point brings up the very important challenge of interoperability, including standards and protocols that will need to be built into these systems from the beginning. Each individual digital twin would have full flexibility in internal construction but would need standards-based interfaces (input and output) or hooks to make it compatible with others. Another challenge when building digital twins will be to decide how to organize each digital replica. Based on the applications targeted by the DT under implementation, various amounts and types of raw data, Analysis Ready Data (ARD) and information will need to be incorporated. Depending on the required latencies and needs of the users, various solutions can be considered, including Data Cubes, Data Lakes, pointers, or computing information on demand. We envision that each ESDT will choose a solution adapted to its specific objectives. Another important challenge is the type(s) of visualization that will be used, as well as the level of interactivity and refresh rate that will be required. Again, this will depend on the objectives of the ESDT, but also on the various users’ needs. In most cases, several types of visualizations and human interfaces will need to be offered depending on the projected users of that system. In parallel to the challenges highlighted above, there are also many tools and technologies that will need to be developed or improved for all types of digital twins. Among those are improved machine learning technologies, for example providing explainability, but also ML techniques for causality and providing a better integration of physics models. Additionally, reliable uncertainty quantification methods will be needed for all ESDT components, from validating data fusion and assimilation to assessing the accuracy of ML models and weighing the values of decisions supported by those systems. This presentation introduces the ESDT concept, presents several ESDT use cases, and a proposed ESDT architecture framework, as well as various technologies being developed by the Advanced Information Systems Technology (AIST) Program."

Earth Science Remote Sensing; Information Systems↗

Signatures of Mollicutes-related endobacteria in publicly available Mucoromycota genomes

ABSTRACT Mucoromycota fungi and their Mollicutes-related endobacteria (MRE) are an ideal system for studying bacterial–fungal interactions and evolution due to the long-term and intimate nature of their interactions. However, methods for detecting MRE face specific challenges due to the poor representation of MRE in sequencing databases coupled with the high sequence divergence of their genomes, making traditional similarity searches unreliable. This has precluded estimations on the diversity of MRE associated with Mucoromycota. To determine the prevalence of previously undetected MRE in fungal genome sequences, we scanned 389 Mucoromycota genome assemblies available from the National Center for Biotechnology Information for the presence of MRE sequences using publicly available tools to map contigs from fungal assemblies to publicly available MRE genomes. We demonstrate a higher diversity of MRE genomes than previously described in Mucoromycota and a lack of cophylogeny between MRE and the majority of their fungal hosts. This supports the late invasion hypothesis regarding MRE acquisition across most of the examined fungal families. In contrast with other Mucoromycota lineages, MRE from the Gigasporaceae displayed some degree of cophylogeny with their hosts, which may indicate that horizontal transmission is restricted between members of this family or that transmission is strictly vertical. These results underscore the need for a refined process to capture sequencing data from potential fungal endosymbionts to discern their evolution and transmission. Screens of fungal genomes for MRE can help improve the quality of fungal genome assemblies while identifying new MRE lineages to further test hypotheses on their origin and evolution. IMPORTANCE Mollicutes-related endobacteria (MRE) are obligate intracellular bacteria found within Mucoromycota fungi. Despite their frequent detection, MRE roles in host functioning are still unknown. Comparative genomic investigations can improve our understanding of the impact of MRE on their fungal hosts by identifying similarities and differences in MRE genome evolution. However, MRE genomes have only been assembled from a small fraction of Mucoromycota hosts. Here, we demonstrate that MRE can be present yet undetected in publicly available Mucoromycota genome assemblies. We use these newfound sequences to assess the broader diversity of MRE and their phylogenetic relationships with respect to their hosts. We demonstrate that publicly available tools can be used to extract novel MRE sequences from assembled fungal genomes leading to insights on MRE evolution. This work contributes to a greater understanding of the fungal microbiome, which is crucial to improving knowledge on the dynamics and impacts of fungi in microbial ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Assimilation of Multiscale Data into Multifidelity Biogeochemical Models (Final Report)

Quantitative predictions of subsurface processes rely on computational models that capture, with different degrees of fidelity, complex interactions between hydrologic and biogeochemical processes. Molecular- and pore-scale models provide a high-fidelity representation of these processes but are impractical at the field scale. Reduced complexity (e.g., field-scale or data-driven) models sacrifice some degree of fidelity in favor of computational efficiency. Uncertainty and assimilation of data into model predictions, pose a question of model selection: Given a significant difference in computational cost, can a lower-fidelity model be preferable to its higher-fidelity counterpart? Since a predictive model must be computable in reasonable time it has to operate at the field scale, with molecular- and pore-scale data (obtained either from simulations or measurements) determining both the model's structure and parameters. Availability of such multi-resolution data raises a question hitherto undressed in hydrogeology: Can a coarse model dynamically ``learn'' its own structure (e.g., adjust the reaction pathways in its transport module) as more fine-scale data become available during simulations? Our results in multifidelity simulations, data assimilation, and machine learning led us to hypothesize that the answer to these questions is ``yes''. The overarching goal of this project was to confirm this hypothesis by developing scalable, computationally efficient tools for assimilation of data into multiscale models, in which fine-scale data and simulations dynamically inform and autonomously modify coarse-scale models. Our research led to nine manuscripts, three of which have been published and the other six are currently under review.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗