Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations. Phase 5B: Analysis of gust alleviation methods and rotor dynamic stability

The effects of various gust alleviation methods on the random blade response in flapping were studied analytically, assuming a rigid rotor support. The analytical model assumes rigid flapping blades with elastic root restraints. Linearized equations which are approximately valid at low lift conditions were used. Because of the interblade coupling from the feedback devices, the method of multiblade generalized coordinates was most convenient and was extended to include coning, differential coning, and warping of the rotor. The numerical examples cover the dynamic stability characteristics as affected by feedback gains of three- to six-bladed rotors. The number of blades had large effects on stability limits and modal time functions at these limits. The random flapping response of the blades to atmospheric turbulence was determined at 1.6 rotor advance ratio using feedback gains below the stability limit. The most effective reduction of the flapping response per unit gain was achieved with a rotor coning angle feedback.

Hohenemser, K. H.↗

Seeing effects on occultation curves.

Evaluation of seeing effects on the light curve of a stellar occultation by the moon. Some theoretical studies of Fried (1966) and Hulett (1967) on the linear size of the downward-looking seeing disk are cited, showing that the seeing blur amounts to a few centimeters for a star in the zenith and that the linear blur must grow approximately as (sec z) to the 3/2 power. For most observations the seeing blur will not exceed 8 to 10 cm. The limitation on angular resolution imposed by this seeing effect is calculated.

Young, A. T.↗

Numerical solution of laminar jet mixing with and without free stream.

Systematic numerical solutions of two-dimensional and axisymmetrical laminar jet of an incompressible fluid with and without free stream have been obtained. For the case without free stream, the exact numerical solutions have been obtained for different initial velocity profiles and compared with experimental results and similarity solutions. For the case with free stream, the numerical solutions have been compared with the linearized analytical solutions. An approximate numerical solution for the axial velocity distribution of the three-dimensional laminar jet is proposed. The accuracy of the method has been determined from the exact solutions of the two limiting cases of three-dimensional jets, i.e., the two-dimensional and axisymmetric cases.

Pai, S. I.↗

Solution of the stochastic control problem in unbounded domains.

Bellman's dynamic programming equation for the optimal index and control law for stochastic control problems is a parabolic or elliptic partial differential equation frequently defined in an unbounded domain. Existing methods of solution require bounded domain approximations, the application of singular perturbation techniques or Monte Carlo simulation procedures. In this paper, using the fact that Poisson impulse noise tends to a Gaussian process under certain limiting conditions, a method which achieves an arbitrarily good approximate solution to the stochastic control problem is given. The method uses the two iterative techniques of successive approximation and quasi-linearization and is inherently more efficient than existing methods of solution.

Robinson, P.↗

Far field effects of weak spatially periodic inhomogeneities.

Small variations in the properties of an acoustic medium produce cumulative effects that significantly alter wave forms propagating over long distances. To investigate some aspects of these effects, without statistical models, the one-dimensional wave equation with a weak spatially periodic variation in the sound speed is treated. An approximation is developed valid for such weak inhomogeneities over large distances based upon the approximate treatment of a linear differential equation with a periodic coefficient. It is applied to the propagation of an initial step wave and identifies the dispersive nature of the medium which accounts for the cumulative effects.

Friedman, M. B.↗

New high-temperature noble-metal thermocouple pairing

A new thermocouple pairing was formed by combining thermocouple elements from two existing commercially available thermocouples to form a new combination (Ir-40 Rh/Pt-40 Rh) thermocouple. The output of this new pairing is nearly linear with temperature, and approximately equal to the output of one of the originating pairs (Ir-40 Rh/Ir), and more than double that of the other pair (Pt-40 Rh/Pt-20 Rh). This new pairing was evolved during a search for a noble-metal thermocouple combination which could operate above the temperature limit of a Pt-13 Rh/Pt thermocouple and have a higher oxidation resistance than an Ir-40 Rh/Ir thermocouple.

Glawe, G. E.↗

Static analysis of a sonar dome rubber window

The application of NASTRAN (level 16.0.1) to the static analysis of a sonar dome rubber window (SDRW) was demonstrated. The assessment of the conventional model (neglecting the enclosed fluid) for the stress analysis of the SDRW was made by comparing its results to those based on a sophisticated model (including the enclosed fluid). The fluid was modeled with isoparametric linear hexahedron elements with approximate material properties whose shear modulus was much smaller than its bulk modulus. The effect of the chosen material property for the fluid is discussed.

Lai, J. L.↗

Density response of the mesospheric sodium layer to gravity wave perturbations

Lidar observations of the mesospheric sodium layer often reveal wavelike features moving through the layer. It is often assumed that these features are a layer density response to gravity waves. Chiu and Ching (1978) described the approximate form of the linear response of atmospheric layers to gravity waves. In this paper, their results are used to predict the response of the sodium layer to gravity waves. These simulations are compared with experimental observations and a good correlation is found between the two. Because of the thickness of the sodium layer and the density gradients found in it, a linear model of the layer response is not always adequate to describe gravity wave-sodium layer interactions. Inclusion of nonlinearities in the layer response is briefly discussed. Experimental data is seen to contain features consistent with the predicted nonlinearities.

Shelton, J. D.↗

Radar observations of the icy Galilean satellites

It is shown that when combined with previous observations, 12.6 cm radar observations of Europa, Ganymede and Callisto made at the Arecibo Observatory in November 1977 and February 1979 firmly establish the distinguishing radar properties of the satellites: (1) high geometric albedos, (2) circular polarization ratios which anomalously exceed unity, (3) linear polarization ratios of approximately 0.5, and (4) diffuse scattering, which varies with the cosine of the angle of incidence. The weighted-mean values of these properties are tabulated, and it is found that although significant albedo and/or polarization features are common in the radar spectra, the fractional root mean square fluctuations in disk-integrated properties is only about 10%.

Ostro, S. J.↗

The Definition and Computation of a Metric on Plane Curves. The Meaning of a Face on a Geometric Model

Two topics in topology, the comparison of plane curves and faces on geometric models, are discussed. With regard to the first problem, a curve is defined to be a locus of points without any underlying parameterization. A metric on a class of plane curves is defined, a finite computation of this metric is given for the case of piecewise linear curves, and it is shown how to approximate curves that have bounded curvature by piecewise linear curves. In this way a bound on the distance between two curves can be computed. With regard to the second problem, the questions to be discussed are under what circumstances do geometrical faces make sense; how can they be explicity defined; and when are these geometrical faces homeomorphic to the realization of the abstract (topological) face.

Emery, J. D.↗

Turbulence in a convective marine atmospheric boundary layer

The structure and kinetic energy budget of turbulence in the convective marine atmospheric boundary layer as observed by aircraft during a cold air outbreak have been studied using mixed layer scaling. The results are significantly different from those of previous studies under conditions closer to free convection. The normalized turbulent kinetic energy and turbulent transport are about twice those found during the Air Mass Transformation Experiment (AMTEX). This implies that for a given surface heating the present case is dynamically more active. The difference is mainly due to the greater importance of wind shear in the present case. This case is closer to the roll vortex regime, whereas AMTEX observed mesoscale cellular convection which is closer to free convection. Shear generation is found to provide a significant energy source, in addition to buoyancy production, to maintain a larger normalized turbulent kinetic energy and to balance a larger normalized dissipation. The interaction between turbulent pressure and divergence (i.e., pressure scrambling) is also found to transfer energy from the vertical to the horizontal components, and is expected to be stronger in roll vortices than in m esoscale cells. The sensible heat flux is found to fit well with a linear vertical profile in a clear or subcloud planetary boundary layer (PBL), in good agreement with the results of Lenschow et al., (1980). The heat flux ratio between the PBL top and the surface, derived from the linear fitted curve, is approximately -0.14, in good agreement with that derived from the lidar data for the same case. Near the PBL top, the heat flux profiles are consistent with those of Deardoff (1979) and Deardorff et al. (1980).

Chou, S.-H.↗

Fuel-air mixing and combustion in a two-dimensional Wankel engine

A two-equation turbulence model, an algebraic grid generalization method, and an approximate factorization time-linearized numerical technique are used to study the effects of mixture stratification at the intake port and gaseous fuel injection on the flow field and fuel-air mixing in a two-dimensional rotary engine model. The fuel distribution in the combustion chamber is found to be a function of the air-fuel mixture fluctuations at the intake port. It is shown that the fuel is advected by the flow field induced by the rotor and is concentrated near the leading apex during the intake stroke, while during compression, the fuel concentration is highest near the trailing apex and is lowest near the rotor. It is also found that the fuel concentration near the trailing apex and rotor is small except at high injection velocities.

Shih, T. I.-P.↗

Turbulent reconnection

The reconnection rate in the presence of tearing mode turbulence is calculated. Tearing modes can produce turbulence in three-dimensional sheared magnetic fields. They produce a turbulent anomalous electron viscosity or hyperresistivity. Using quasi-linear and direct interaction approximations, the scaling of the hyperresistivity with magnetic perturbation strength and other parameters is estimated. This yields a reconnection rate, or inflow Mach number M, scaling as delta B, the ratio of rms magnetic fluctuations to mean magnetic field. This can greatly exceed the Sweet-Parker rate. The rate of heating of the current sheet is also large and can be many orders of magnitude larger than in a Sweet-Parker current sheet. Hyperresistivity produced by tearing mode turbulence may explain both fast reconnection and the heating of the solar corona.

Strauss, H. R.↗

Crossflow-vortex instability and transition on a 45 deg swept wing

A crossflow vortex experiment on a 45 deg swept wing is currently being conducted in the Arizona State University Unsteady Wind Tunnel. The experimental apparatus is designed to produce crossflow-dominated transition by simulating infinite swept wing flow using contoured end liners in a closed throat wind tunnel. Stationary fixed-wavelength crossflow vortices are observed at several chord Reynolds numbers. The vortex wavelength which is fixed for a given Reynolds number varies with Reynolds number approximately as predicted by linear stability theory, but with the predicted wavelengths about 30 percent larger than the observed wavelengths. Travelling waves are observed both in the frequency range predicted by linear stability theory and at higher frequencies. These higher frequency waves may be harmonics of the primary crossflow waves generated by a nonlinear parametric resonance phenomena.

Dagenhart, J. Ray↗

On the design of nonlinear controllers for flight control systems

A method of approximate input-output linearization by dynamic state feedback is presented, with the flight control of VTOL aircraft used as an example. It is shown that the closed loop system has a graceful degradation of performance as the moment-to-force coupling is increased. It is also demonstrated that the approach proposed here leads to an asymptotically stable closed loop system with guaranteed bounds on the tracking error caused by the nonminumum phase character of the system.

Hauser, John↗

Development of an integrated BEM approach for hot fluid structure interaction

The progress made toward the development of a boundary element formulation for the study of hot fluid-structure interaction in Earth-to-Orbit engine hot section components is reported. The convective viscous integral formulation was derived and implemented in the general purpose computer program GP-BEST. The new convective kernel functions, in turn, necessitated the development of refined integration techniques. As a result, however, since the physics of the problem is embedded in these kernels, boundary element solutions can now be obtained at very high Reynolds number. Flow around obstacles can be solved approximately with an efficient linearized boundary-only analysis or, more exactly, by including all of the nonlinearities present in the neighborhood of the obstacle. The other major accomplishment was the development of a comprehensive fluid-structure interaction capability within GP-BEST. This new facility is implemented in a completely general manner, so that quite arbitrary geometry, material properties and boundary conditions may be specified. Thus, a single analysis code (GP-BEST) can be used to run structures-only problems, fluids-only problems, or the combined fluid-structure problem. In all three cases, steady or transient conditions can be selected, with or without thermal effects. Nonlinear analyses can be solved via direct iteration or by employing a modified Newton-Raphson approach.

Dargush, G. F.↗

Accurate computation and continuation of homoclinic and heteroclinic orbits for singular perturbation problems

In earlier papers, Doedel and the authors have developed a numerical method and derived error estimates for the computation of branches of heteroclinic orbits for a system of autonomous ordinary differential equations in R(exp n). The idea of the method is to reduce a boundary value problem on the real line to a boundary value problem on a finite interval by using a local (linear or higher order) approximation of the stable and unstable manifolds. A practical limitation for the computation of homoclinic and heteroclinic orbits has been the difficulty in obtaining starting orbits. Typically these were obtained from a closed form solution or via a homotopy from a known solution. Here we consider extensions of our algorithm which allow us to obtain starting orbits on the continuation branch in a more systematic way as well as make the continuation algorithm more flexible. In applications, we use the continuation software package AUTO in combination with some initial value software. The examples considered include computation of homoclinic orbits in a singular perturbation problem and in a turbulent fluid boundary layer in the wall region problem.

Vaughan, William W.↗

Radiative equilibrium in rapidly expanding shells

The equation of radiative equilibrium for rapidly expanding spherical shells including the special relativistic terms is discussed, and a temperature-correction procedure for the solution of this equation is given. The temperature-correction scheme combines a partial linearization approach with the approximate Lambda-operator iteration method. For some test problems, the temperature structures of atmospheres in radiative equilibrium in the Lagrangian frame are calculated. The effects of the velocity field on the temperature stratification and the luminosity are also discussed. We find that the temperature structure of a moving photosphere in radiative equilibrium in the Lagrangian frame differs significantly from that of a static photosphere and that, at least, all first-order terms, in particular the advection and aberration terms, have to be included consistently both in the radiative transfer and the energy equation in studies of supernovae atmospheres and other high-speed radiating flows.

Hauschildt, P. H.↗