Search NASA⌕ Search

SEARCH · Search NASA

Results for “load changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Understanding pop-ins in spherical nanoindentation

In this study, pop-ins, or sudden displacement-bursts at constant load in a nanoindentation test, are typically attributed to the difficulty of setting up potent dislocation sources in the very small indentation zones in these experiments. Such displacement (and strain) bursts would intuitively indicate a sharp drop in stress during the pop-in event itself. However, spherical indentation stress-strain curves routinely exhibit a high and stable indentation stress value during the pop-in, and the indentation stresses decrease only after a further finite amount of additional indentation displacement has been applied. In order to understand this discrepancy, we utilize a combination of interrupted spherical indentation tests along with depth profiling of the residual indentation surfaces using in-situ atomic force microscopy (AFM) to study pop-ins. The AFM surface profile maps show that there is an asymmetric profile change over a limited region around the indentation contact area for a single pop-in; the asymmetry disappears upon further loading beyond the pop-in. A plausible sequence of physical processes (related to metal plasticity) occurring underneath the indenter during and immediately after the occurrence of the pop-in is proposed to explain these observations.

36 MATERIALS SCIENCE↗

Load Following Analysis of the Holos-Quad 10MWe Micro-Reactor with Plant Dynamics Code

This report presents the load following analysis of the “Holos-Quad” 10MWe micro-reactor design developed by HolosGen LLC. This analysis is focused on the Holos-Quad micro-reactor ability to match the changing grid demand at 10%/min rate. The control mechanisms for the plant are identified, simulated, and compared. Based on the comparison results, control strategy for load following of the Holos-Quad micro-reactor is developed. The control strategy and load following capabilities are demonstrated in a full-range down-and-up reactor power transient from 100% to 0% and back to 100% load at 10%/min rate. All calculations are carried out with Argonne’s Plant Dynamics Code.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Mechanical adaptation of brachiopod shells via hydration-induced structural changes

The function-optimized properties of biominerals arise from the hierarchical organization of primary building blocks. Alteration of properties in response to environmental stresses generally involves time-intensive processes of resorption and reprecipitation of mineral in the underlying organic scaffold. Here, we report that the load-bearing shells of the brachiopod Discinisca tenuis are an exception to this process. These shells can dynamically modulate their mechanical properties in response to a change in environment, switching from hard and stiff when dry to malleable when hydrated within minutes. Using ptychographic X-ray tomography, electron microscopy and spectroscopy, we describe their hierarchical structure and composition as a function of hydration to understand the structural motifs that generate this adaptability. Key is a complementary set of structural modifications, starting with the swelling of an organic matrix on the micron level via nanocrystal reorganization and ending in an intercalation process on the molecular level in response to hydration.

36 MATERIALS SCIENCE↗

Exceptional NH 3 Detection by Cu(cyhdc) MOF Sensor Due to H 2 O Coadsorption

Metal–organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH 3 has been particularly difficult to design due to the low electrical response of NH 3 . However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH 3 due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH 3 gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH 3 . At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH 3 for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH 3 over 20–50 °C. Here, this electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH 3 and H 2 O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH 3 and/or H 2 O adsorption. Despite extremely low NH 3 , loadings seen in TGA, XPS, and FT-IR confirm NH 3 and H 2 O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH 3 adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH 3 and H 2 O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH 3 . Together, these results demonstrate how coadsorption of specific molecules (H 2 O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.

ammonia↗

Probing the Energetics of Molecule–Material Interactions at Interfaces and in Nanopores

During the past decades, advances in interfacial chemistries at the molecular level are shaping our world by playing crucial roles in balancing global scale energy crisis and critical environmental concerns. However, systematic investigations into the binding energies, site distribution and their correlation with the molecular-level surface assemblages and structures at interfaces and in nanopores are rarely documented. In this review, we summarize a set of systematic calorimetric studies on surface energetics we performed during the last decade. These studies demonstrate how thermochemistry can reveal crucial energetic insights into a series of molecule – material interactions relevant to a number of applications, including carbon capture and sequestration, energy production, sustainable chemical processing, catalysis, and nanogeoscience. Calorimetric methodologies developed and applied include direct gas adsorption calorimetry, nearroom temperature solvent immersion/solution calorimetry and high temperature oxide melt solution calorimetry. Using these highly unique techniques, we reveal the thermodynamic complexity of carbon dioxide capture on metal – organic framework (MOF) sorbents with built-in and grafted nucleophilic functional groups (-OH and -NH2). These studies suggest that carbon dioxide adsorption on functionalized MOFs is a complex process involving multiple thermodynamic factors, as reflected by changes in surface phase and structure, chemical bonding and degree of disorder with varying temperature and gas loading. The fundamental insights obtained may help optimize the design, synthesis and application of MOF-based carbon dioxide sorbents for carbon capture and sequestration. In parallel, we also explore the energetics of interaction and competition between small molecules (water, carbon dioxide, methane, simple and complex organics) and inorganic materials (calcite, silica, zirconia, zeolites, mesoporous frameworks, alumina, and uranium), at interfaces and in nanopores. Combined with spectroscopic, diffraction, electron microscopic and computational techniques, the energetics of gas/liquid – solid interactions can be correlated with specific bonds, molecular configurations and nanostructures. Although the energetics evolves continuously from weak association to strong bonding to classical capping, distinct regions of rapidly changing stepwise energetics often separate the different regimes. These phenomena are closely related to the properties of inorganic material surfaces (hydrophobicity and acidity/basicity), the framework architectures, and the chemical nature of adsorbate molecules. These direct thermodynamic insights reinforce our understanding of complex small molecule – inorganic material interactions important to multiple disciplines of chemical engineering, materials science, nanogeoscience and environmental technology, including heterogeneous catalysis, molecular separation, material design and synthesis, biomineralization, contaminant and nutrient transport, carbonate formation, and water – organic competitions on material/mineral surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of index change saturation on the growth behavior of higher-order type I ultrafast induced fiber Bragg gratings

Ultrafast infrared induced fiber Bragg gratings in a hydrogen-loaded SMF-28 fiber are shown to exhibit complex and, what we believe to be, novel spectral evolutions. It is believed that the induced grating peak profile in the fiber is nonsinusoidal as a result of the nonlinear absorption required to modify the material. Rouard's method is used to show that the observed spectral evolution is a consequence of the saturation of the nonsinusoidal index change profile.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Loads Bias Genetic and Signaling Switches in Synthetic and Natural Systems

Biological protein interactions networks such as signal transduction or gene transcription networks are often treated as modular, allowing motifs to be analyzed in isolation from the rest of the network. Modularity is also a key assumption in synthetic biology, where it is similarly expected that when network motifs are combined together, they do not lose their essential characteristics. However, the interactions that a network module has with downstream elements change the dynamical equations describing the upstream module and thus may change the dynamic and static properties of the upstream circuit even without explicit feedback. In this work we analyze the behavior of a ubiquitous motif in gene transcription and signal transduction circuits: the switch. We show that adding an additional downstream component to the simple genetic toggle switch changes its dynamical properties by changing the underlying potential energy landscape, and skewing it in favor of the unloaded side, and in some situations adding loads to the genetic switch can also abrogate bistable behavior. We find that an additional positive feedback motif found in naturally occurring toggle switches could tune the potential energy landscape in a desirable manner. We also analyze autocatalytic signal transduction switches and show that a ubiquitous positive feedback switch can lose its switch-like properties when connected to a downstream load. Our analysis underscores the necessity of incorporating the effects of downstream components when understanding the physics of biochemical network motifs, and raises the question as to how these effects are managed in real biological systems. This analysis is particularly important when scaling synthetic networks to more complex organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Finite element modeling of concentrating solar collectors for evauation of gravity loads, bending, and optical characterization.

Understanding the effects of gravity and wind loads on concentrating solar power (CSP) collectors is critical for performance calculations and developing more accurate alignment procedures and techniques. This paper presents a rigorous finite-element model of a parabolic trough collector that is used to determine the impact of gravity loads on bending and displacements of the mirror facets and support structure. The geometry of the LUZ LS-2 parabolic trough collector was modeled using SolidWorks, and gravity-induced loading and displacements were simulated in SolidWorks Simulation. The model of the trough collector was evaluated in two positions: the 90{sup o} position (mirrors facing upward) and the 0{sup o} position (mirrors facing horizontally). The slope errors of the mirror facet reflective surfaces were found by evaluating simulated angular displacements of node-connected segments along the mirror surface. The ideal (undeformed) shape of the mirror was compared to the shape of the deformed mirror after gravity loading. Also, slope errors were obtained by comparing the deformed shapes between the 90{sup o} and 0{sup o} positions. The slope errors resulting from comparison between the deformed vs. undeformed shape were as high as {approx}2 mrad, depending on the location of the mirror facet on the collector. The slope errors resulting from a change in orientation of the trough from the 90{sup o} position to the 0{sup o} position with gravity loading were as high as {approx}3 mrad, depending on the location of the facet.

14 SOLAR ENERGY↗

Advancing the quantification of aerosol-cloud interactions with the CALIPSO-CloudSat-Aqua/MODIS record

Aerosol-cloud-precipitation interactions are assessed over the non-polar ocean using more than 11 years of combined Aqua-MODIS, CALIPSO-CALIOP, and CloudSat products. The analysis first shows the benefit of incorporating vertically resolved aerosol extinction coefficient (σext) in aerosol-cloud interactions (ACI) assessments, demonstrating that: σext vertically collocated with the cloud layer () correlates best with cloud droplet number concentration (Nd), column-integrated aerosol optical depth (AOD) cannot explain the Nd variability in the extratropics, and the S-shape of the AOD-Nd relationship reported in previous studies is not replicated when using instead of AOD, with a Nd- linearity more consistent with in-situ studies over the ocean. ACI metric, estimated as the log-scale regression between CALIOP and MODIS Nd reveals that the eastern Pacific is the region with the strongest ACI, followed by the Southern Ocean. The susceptibility of clouds to changes in their liquid water path (LWP) and frequency of precipitation followed a 2-step calculation by combining the Nd- regression (ACI) with the regression between these macrophysical variables and Nd. LWP susceptibility is negative (LWP decreases with aerosol loading) and statistically significant over the eastern Pacific, eastern Atlantic, and extratropics. In contrast, vast areas of the tropical and subtropical ocean feature negligible changes in LWP with aerosol. Precipitation frequency susceptibility is negative, but the values are only significant over the coastal eastern Pacific and Atlantic. The findings suggest that previous modeling assessments relying on AOD may need to be revisited by taking advantage of the synergy between passive and active sensors.

Li, Zhujun↗

Models and Simulation Environment for the Design and Optimization of Hybrid Energy Systems

The energy landscape in the U.S. is changing with proposed federal regulations limiting carbon dioxide emissions and with government credits for 'clean' energy technologies. This shift in the market conditions, especially in deregulated markets, has already resulted in the closing of coal power plants. Previously these coal plants served to balance variation in load. The resulting loss of electricity production is being made up in part with increased renewable generation. This set of governmental policy changes potentially presents expanded opportunities for both renewable energy and nuclear energy to become significant energy sources in the future. Potential synergies exist that can reduce greenhouse gas (GHG) emissions and provide affordable, sustainable energy. Combining multiple energy production, conversion, storage, and consumption facilities can leverage these potential synergies. This research focuses on integrating nuclear power plants within systems with increased renewable penetration, referred to as a nuclear renewable hybrid energy system (NRHES). Industrial-scale nuclear renewable hybrid energy systems have the potential to provide grid services such as dispatchable generation, storage, ancillary services, and power regulation. The problem of designing, analyzing, and optimizing the NHRES is being undertaken by a multi-laboratory team. The effort requires the collaboration of experts across engineering disciplines with methods and results to be shared by these experts. To facilitate collaborations a common system modeling and analysis language is adopted along with open-source libraries and interface standards that support data exchange among the models. Modelica was selected as the common language based on its prior use by team members at each of Idaho National Laboratory, Oak Ridge National Laboratory, and Argonne National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Trends and source apportionment of aerosols in Europe during 1980-2018

Aerosols have significantly affected health, environment, and climate in Europe. Aerosol concentrations have been declining since the 1980s in Europe,mainly owing to a reduction of local aerosol and precursor emissions.Emissions from other source regions of the world, which have been changing rapidly as well, may also perturb the historical and future trends of aerosols and change their radiative impact in Europe. This study examines trends of aerosols in Europe during 1980–2018 and quantifies contributions from 16 source regions using the Community Atmosphere Model version 5 with Explicit Aerosol Source Tagging (CAM5-EAST). The simulated near-surface total mass concentration of sulfate, black carbon, and primary organic carbon had a 62 % decrease during 1980–2018. The majority of which was contributed to reductions of local emissions in Europe, and 8 %–9 % was induced by a decrease in emissions from Russia–Belarus–Ukraine. With the decreases in the fractional contribution of local emissions, aerosols transported from other source regions are increasingly important for air quality in Europe. During 1980–2018, the decrease in sulfate loading led to a warming effect of 2.0 W m –2 in Europe, with 12 % coming from changes in non-European sources, especially from North America and Russia–Belarus–Ukraine. According to the Shared Socioeconomic Pathways (SSP) scenarios, contributions to the sulfate radiative forcing over Europe from both local European emissions and non-European emissions should decrease at a comparable rate in the next 3 decades, suggesting that future changes in non-European emissions are as important as European emissions for causing possible regional climate change associated with aerosols in Europe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of peaking factor credit in spent fuel pool criticality analysis

Higher moderator temperature (lower density) and higher fuel temperatures used in the depletion analysis of spent fuel increases the reactivity. Modern criticality analyses for spent fuel pools typically determine the highest power assembly and use the temperatures from this high power assembly. The high power assembly is determined by finding the maximum assembly averaged relative power or peaking factor. For the depletion analysis it is appropriate to use the average peaking factor over the life of the assembly. This can be determined by dividing the assembly burnup by the sum of the core cycle burnups for the cycles the assembly was in the core. A bounding assembly averaged peaking factor is typically about 1.4. Clearly this is 40% higher than the average assembly power. The reactivity limiting fuel assembly generally has low burnup and thus a low peaking factor. Rather than assume a limiting peaking factor to determine the temperatures in the depletion analysis, the depletion analysis can be performed multiple times with different temperature sets so the depleted isotopic content is a function of the peaking factor. This would allow more fuel assemblies to satisfy the loading criteria while maintaining the same criticality margin. The peaking factor credit can be about 2% in k or about 3.5 GWd/MTU change in the burnup requirements. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First divertor physics studies in Wendelstein 7-X

The Wendelstein 7-X (W7-X) optimized stellarator fusion experiment, which went into operation in 2015, has been operating since 2017 with an un-cooled modular graphite divertor. This allowed first divertor physics studies to be performed at pulse energies up to 80 MJ, as opposed to 4 MJ in the first operation phase, where five inboard limiters were installed instead of a divertor. This, and a number of other upgrades to the device capabilities, allowed extension into regimes of higher plasma density, heating power, and performance overall, e.g. setting a new stellarator world record triple product. The paper focuses on the first physics studies of how the island divertor works. The plasma heat loads arrive to a very high degree on the divertor plates, with only minor heat loads seen on other components, in particular baffle structures built in to aid neutral compression. The strike line shapes and locations change significantly from one magnetic configuration to another, in very much the same way that codes had predicted they would. Strike-line widths are as large as 10 cm, and the wetted areas also large, up to about 1.5 m 2 , which bodes well for future operation phases. Peak local heat loads onto the divertor were in general benign and project below the 10 MW m –2 limit of the future water-cooled divertor when operated with 10 MW of heating power, with the exception of low-density attached operation in the high-iota configuration. We report the most notable result was the complete (in all 10 divertor units) heat-flux detachment obtained at high-density operation in hydrogen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Poisson's Ratio of a Hyperelastic Foam Under Quasi-static and Dynamic Loading

Poisson's ratio is a material constant representing compressibility of material volume. However, when soft, hyperelastic materials such as silicone foam are subjected to large deformation into densification, the Poisson's ratio may rather significantly change, which warrants careful consideration in modeling and simulation of impact/shock mitigation scenarios where foams are used as isolators. The evolution of Poisson's ratio of silicone foam materials has not yet been characterized, particularly under dynamic loading. In this study, radial and axial measurements of specimen strain are conducted simultaneously during quasi-static and dynamic compression tests to determine the Poisson's ratio of silicone foam. The Poisson's ratio of silicone foam exhibited a transition from compressible to nearly incompressible at a threshold strain that coincided with the onset of densification in the material. Poisson's ratio as a function of engineering strain was different at quasi-static and dynamic rates. Here, the Poisson's ratio behavior is presented and can be used to improve constitutive modeling of silicone foams subjected to a broad range of mechanical loading.

36 MATERIALS SCIENCE↗

Modification of HBA/D230 Polymer for Stone Protection

By using poly(propylene glycol)bis(2-aminopropyl ether) (D230) as curing agent, we have prepared color-stable hydrogenated Bisphenol A (HBA) epoxy polymers, containing TiO{sub 2} nanoparticles. The loading and size of TiO{sub 2} nanoparticles (5 ~ 10, 21, 200 ~ 400 nm) are changed in order to investigate their photocatalytic effect on removing pollutants deposited on the surface of stone. HBA/D230 polymers containing different amounts of TiO{sub 2} nanomaterials were applied to methyl orange (MeO) on the limestone with exposure to the dry and wet environment, respectively. The results showed that the modification of HBA by addition of titanium dioxide particles substantially not only enhanced its protective efficiency but also rendered the treated stone surface self-cleaning ability. The photocatalytic degradation effect of MeO at the concentration of 0.001 M was the best when the size of TiO{sub 2} nanoparticles was between 200 ~ 400 nm. Compared to those in dry environment, the decrease of the content of MeO in samples exposed to wet environment was due to humidity on the surface of limestone.

36 MATERIALS SCIENCE↗

Dynamic Tensile Characterization of Thin-Sheet Brittle Metallic Materials

Refractory metals are favorable materials in applications where high strength and ductility are needed at elevated temperatures. In some cases, operating temperatures may be near the melting point of the material. However, as temperature drops, refractory metals typically undergo a significant mechanical response change - ductile-to-brittle transition. These materials may be subjected to high strain rate loading at an ambient temperature state, such as an impact or crash. Knowledge of the high rate material properties are essential for design as well as simulation of impact events. The high rate stress-strain behavior of brittle metallic materials at ambient temperature is rarely studied because of experimental challenges, particularly when failure is involved. Failure typically occurs within the non-gage section of the material, which invalidates any collected stress-strain information. Here, a method to determine a specimen geometry which will produce failures in the gage section is presented. Pure tungsten in thin-sheet form was used as a trial material to select a specimen geometry for high rate Kolsky tension bar experiments. A finite element simulation was conducted to derive a strain correction for more accurate results. The room temperature stress-strain behavior of pure tungsten at a strain rate of 24 s –1 is presented. The outcome of this experimental technique can be applied to other brittle materials for dynamic tensile characterization.

36 MATERIALS SCIENCE↗

The Radiation Oncology Job Market: The Economics and Policy of Workforce Regulation

Examinations of the US radiation oncology workforce offer inconsistent conclusions, but recent data raise significant concerns about an oversupply of physicians. Despite these concerns, residency slots continue to expand at an unprecedented pace. Employed radiation oncologists and professional corporations with weak contracts or loose ties to hospital administrators would be expected to suffer the greatest harm from an oversupply. The reduced cost of labor, however, would be expected to increase profitability for equipment owners, technology vendors, and entrenched professional groups. Policymakers must recognize that the number of practicing radiation oncologists is a poor surrogate for clinical capacity. There is likely to be significant opportunity to augment capacity without increasing the number of radiation oncologists by improving clinic efficiency and offering targeted incentives for geographic redistribution. Payment policy changes significantly threaten radiation oncologists' income, which may encourage physicians to care for greater patient loads, thereby obviating more personnel. Furthermore, the implementation of alternative payment models such as Medicare's Oncology Care Model threatens to decrease both the utilization and price of radiation therapy by turning referring providers into cost-conscious consumers. Medicare funds the vast majority of graduate medical education, but the extent to which the expansion in radiation oncology residency slots has been externally funded is unclear. Excess physician capacity carries a significant risk of harm to society by suboptimally allocating intellectual resources and creating comparative shortages in other, more needed disciplines. There are practical concerns associated with a market-based solution in which medical students self-regulate according to job availability, but antitrust law would likely forbid collaborative self-regulation that purports to restrict supply. Because Congress is unlikely to create one central body to govern residency controls for all specialties, we recommend better reporting of program-specific employment metrics and careful, intellectually honest re-evaluation of existing Accreditation Council for Graduate Medical Education accreditation standards.

61 RADIATION PROTECTION AND DOSIMETRY↗

Volatility Basis Set Distributions and Viscosity of Organic Aerosol Mixtures: Insights from Chemical Characterization Using Temperature-Programmed Desorption–Direct Analysis in Real-Time High-Resolution Mass Spectrometry

Quantitative assessment of gas-particle partitioning of individual components within complex atmospheric organic aerosols (OA) mixtures is critical for predicting and comprehending the formation and evolution of OA particles in the atmosphere. This investigation leverages previously documented data obtained through a temperature programmed desorption - direct analysis in real time – high resolution mass spectrometry (TPD-DART-HRMS) platform. This methodology facilitates the bottom-up construction of volatility basis set (VBS) distributions for constituents found in three biogenic secondary organic aerosol (SOA) mixtures produced through the ozonolysis of a-pinene, limonene, and ocimene. The apparent enthalpies (ΔH*, kJ mol -1 ) and saturated vapor mass concentrations (C T *, µg∙m -3 ) of individual SOA components, determined as a function of temperature (T, K), facilitated an assessment of changes in VBS distributions and gas-particle partitioning with respect to T and atmospheric total organic mass loadings (tOM, µg∙m -3 ). Further, the VBS distributions reveal distinct differences in volatilities among monomers, dimers, and trimers, enabling their categorization into separate volatility bins. At the ambient temperature of T = 298 K, only monomers efficiently partition between gas and particle phases across a broad range of atmospherically relevant total organic mass loadings (tOM) values of 1–100 µg∙m -3 . Partitioning of dimers and trimers becomes notable only at T > 360 K and T > 420 K, respectively. The viscosity of SOA mixtures is assessed using a bottom-up calculation approach, incorporating the input of elemental formulas, ΔH*, C T *, and particle-phase mass fractions of the SOA components. Through this approach, we are able to accurately estimate the variations in SOA viscosity that result from the evaporation of its components. These variations are, in turn, influenced by atmospherically relevant changes in tOM and T. Comparison of the calculated SOA viscosity and diffusivity values with literature reported experimental results shows close agreement, thereby validating the employed calculation approach. These findings underscore the significant potential for TPD-DART-HRMS measurements in enabling the untargeted analysis of organic molecules within OA mixtures. This approach facilitates quantitative assessment of their gas-particle partitioning and allows for the estimation of their viscosity and condensed-phase diffusion, thereby contributing valuable insights to atmospheric models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗