Search NASA⌕ Search

SEARCH · Search NASA

Results for “process control and optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Microstructure evolution in the conventional single side and bobbin tool friction stir welding of thick rolled 7085-T7452 aluminum alloy

Highlights: • Comparison of microstructure evolution via EBSD of SS-FSW and BB-FSW was investigated. • Friction heat, strain rate and degree of recrystallization affected grain size. • Discontinuously dynamic recrystallization occurred in the weld nugget zone. • The degree of recrystallization was mainly controlled by the strain rate. - Abstract: The microstructure evolution during the conventional single side friction stir welding (SS-FSW) and the bobbin tool FSW (BB-FSW) of 7085-T7452 alloy thick plate was extensively studied by using the state-of-the-art materials characterization techniques. The Electron backscattering diffraction results reveal that a significant grain refinement and a larger percentage of high angle grain boundaries (HAGBs) exist in the weld nugget zone (WNZ) and the thermal-mechanical affected zone (TMAZ) compared with the base material. Meanwhile, more obviously inhomogeneous refined grains and HAGBs in WNZ along the thickness direction and a larger percentage of low angle grain boundaries (LAGBs) were observed in SS-FSW joint than that in BB-FSW joint. The change of the average grain size is the result of friction heat and strain rate of plastic deformation combined with a certain degree of recrystallization. Moreover, the recrystallization is mainly controlled by the strain rate during the FSW process. The presence of Cube and Cube ND after welding shows that the discontinuously dynamic recrystallization (DDRX) is a major factor in the final microstructural response. The research and findings help the understanding of the mechanism of microstructure homogenization and further optimizing the welding process for application.

36 MATERIALS SCIENCE↗

Process innovations to enable viable enzymatic poly(ethylene terephthalate) recycling

Enzymatic depolymerization of poly(ethylene terephthalate) (PET) has received considerable attention for closed-loop polyester recycling. However, current approaches for enzymatic PET recycling face challenges to achieve commercial viability with lower environmental impacts compared with virgin polyester manufacturing. Here, in this study, we present multiple process innovations for enzymatic PET recycling that enable economic and environmental feasibility. We show that substrate amorphization through extrusion and quenching is energy-efficient and enables near-quantitative enzymatic conversion in 50 h. Using ammonium hydroxide for pH control and thermolysis of the isolated diammonium terephthalate salt reduces the acid and base consumption by >99%, lowering annual operating expenses by 74%. Fed-batch processing increased ethylene glycol concentration, leading to a 65% reduction in energy consumption for ethylene glycol recovery. These improvements were modeled in an optimal process, with recycled PET estimated to be US$\$$1.51 kg -1 relative to US domestic virgin PET at US$\$$1.87 kg -1 and eliminating key life cycle obstacles to scale this technology.

36 MATERIALS SCIENCE↗

Two-step spin-coating of vacancy-ordered double perovskites enables growth of thin films for electronic devices

Vacancy-ordered double perovskites (VODPs), such as Cs 2 TeX 6 (X = Cl, Br, I), are lead-free alternatives to conventional metal-halide perovskites (MHPs). One limitation of VODPs is the lack of processes to form thin films relevant for physical characterization and electronic devices. A two-step spin-coating method was developed for synthesizing high-quality films of Cs 2 TeBr 6 . Independently depositing CsBr and TeBr 4 enables high precursor concentrations and control over crystallization kinetics. By optimizing the spin-coating parameters, conversion of precursors to phase pure films was observed using structural and surface characterization methods. The growth of mixed-halide systems was investigated using alternative salts including CsCl and CsI. The formation of halide alloys was found to depend on the existence of routes to byproducts. Lastly, single carrier diodes of Cs2TeBr6 were designed following valence band characterization with photoelectron spectroscopy. Temperature-dependent space-charge-limited current measurements revealed that transport occurs by hopping and the hole mobility is 3.2 × 10 −5 cm 2 V −1 s −1 near room temperature. As a result, the insights from the 2-step procedure provide a pathway towards making semiconducting devices from VODPs.

Kuklinski, Owen [University of California, Santa B↗

A Perspective of Energy Codes and Regulations for the Buildings of the Future

Today’s building energy codes focus on prescriptive requirements for features of buildings that are directly controlled by the design and construction teams and verifiable by municipal inspectors. Although these code requirements have had a significant impact, they fail to influence a large slice of the building energy use pie – including not only miscellaneous plug loads, cooking equipment and commercial/industrial processes, but the maintenance and optimization of the code-mandated systems as well. Currently, code compliance is verified only through the end of construction, and there are no limits or consequences for the actual energy use in an occupied building. In the future, our suite of energy regulations will likely expand to include building efficiency, energy use or carbon emission budgets over their full life cycle. Intelligent building systems, extensive renewable energy, and a transition from fossil fuel to electric heating systems will likely be required to meet ultra-low-energy targets. This paper lays out the authors’ perspectives on how buildings may evolve over the course of the 21st century and the roles that codes and regulations will play in shaping those buildings of the future.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Amorphous lithium lanthanum titanate for solid-state microbatteries

Lithium lanthanum titanate (LLTO) is a promising solid state electrolyte for solid state batteries due to its demonstrated high bulk ionic conductivity. However, crystalline LLTO has a relatively low grain boundary conductivity, limiting the overall material conductivity. In this work, we investigate amorphous LLTO (a-LLTO) thin films grown by pulsed laser deposition (PLD). By controlling the background pressure and temperature we are able to optimize the ionic conductivity to 3 × 10 –4 S/cm and electronic conductivity to 5 × 10 –11 S/cm. XRD, TEM, and STEM/EELS analysis confirm that the films are amorphous and indicate that oxygen background gas is necessary during the PLD process to decrease the oxygen vacancy concentration, decreasing the electrical conductivity. Amorphous LLTO is deposited onto high voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode thin films and cycled up to 4.8 V vs. Li showing excellent capacity retention. Finally, these results demonstrate that a-LLTO has the potential to be integrated into high voltage thin film batteries.

36 MATERIALS SCIENCE↗

Rapid Laser Reactive Sintering of Garnet Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 and Li 6.1 La 3 Zr 2 Al 0.3 O 12 and Solid-State Electrolytes

All solid-state lithium-ion batteries (ASSLIBs) have gained significant interest in recent years due to their wide range of applications, including mobile devices, electric vehicles, and grid storage. Garnet-type Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolyte (SSE) continues to be a significant player in the fabrication of ASSLIBs with excellent ionic conductivity on the order of 10 -3 S•cm -1 with the integration of dopants and sintering aids to assist conductivity and structural evolution during the sintering procedure. Traditional sintering techniques, such as solid-state sintering (SSS), have been proven to yield desirable crystal structures. However, the low ionic conductivity results from inferior microstructure, and lithium loss is a significant challenge. Recently, a relatively novel sintering process called rapid laser sintering (RLS) has shown great potential for achieving fully dense solid oxide electrolytes with less lithium loss, resulting in high ionic conductivity [1] [2] [3] [4]. Here, we applied a modified RLS method using precursor powders instead of pre-synthesized LLZO powders to fabricate Al-doped LLZO (Li 6.1 La 3 Zr 2 Al 0.3 O 12 + 13 wt% Li 2 CO 3 ) and Ta-doped LLZO (Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 + 5 wt% LiOH•H 2 O) dense electrolytes. This rapid laser reactive sintering (RLRS) could potentially reduce the number of processing steps and therefore lower the manufacturing cost. We hope the rapid high-temperature sintering can densify the electrolyte and avoid the lithium loss for achieving high lithium-ion conductivity. In this work, we optimized a combination of laser parameters (speed and power), initial precursor composition, and controlled atmospheres to discover the optimal conditions for reaching the efficacious crystal structure, microstructure, and ionic conductivity.

25 ENERGY STORAGE↗

Photopolymerizable Sol-gel Synthesis for Faster Manufacturing of Surrogate Nuclear Debris

Simulated debris is used to train first responders for potential nuclear detonations. Sol gel chemistry has been used to produce surrogate material for these training exercises, but the current average production time is 4 hours. Optimization using UV-polymerizable sol gel precursors can potentially decrease time as well as cost of the production process. FT-IR spectroscopy was used to measure and compare gelation kinetics of the standard and photopolymerizable sol gel synthetic procedures. Addition of the UV-polymerizable precursors and controlling the aqueous phase volume resulted in a 120-fold decrease in vitrification time.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Catalytic Bio-crude Production in a Novel, Short-Contact Time Reactor

RTI has developed a catalytic fast pyrolysis (CFP) process to produce biomass-based hydrocarbon replacement fuels. From a technology perspective, this advanced biofuels process produces liquid transportation fuels that can leverage capital expenditures in the existing petroleum distribution infrastructure. From a business perspective, this technology does not face potential market limitations caused by oxygenate blend limitations for light duty vehicle applications. A promising catalyst has been developed with excellent potential for deoxygenation to produce a hydrocarbon-rich biocrude that is more suitable for upgrading with traditional hydroprocessing technology. The role of the catalyst is to control the chemistry during biomass pyrolysis to produce a biocrude in a single step that has lower oxygen content and is more thermally stable than conventional biomass fast pyrolysis oil. Catalyst properties are optimized to minimize gas and coke production and improve catalytic deoxygenation and biocrude yields. Results from this project have demonstrated that biocrudes from catalytic fast pyrolysis contain <20 wt% oxygen, with the organic fraction as low as 12% oxygen. These oxygen numbers are > 50% lower compared to traditional fast pyrolysis oils. The biocrude produced from our CFP process can be upgraded to gasoline range hydrocarbons. A very conservative approach for upgrading included a preliminary stabilization step followed by a hydroprocessing step. The oxygen content in the upgraded product was decreased by 97% (to less than 3wt %) from the oxygen content of the biocrude sample. Additionally, the acid content was reduced by 99% from the acid content of the biocrude sample. In an optimized integrated process, the CFP step and the hydroprocessing (upgrading) step need to be carefully balanced to maximize the input biomass energy that is recovered in the finished biofuels. Hydrogen utilization and carbon recovery during both catalytic biomass pyrolysis and biocrude upgrading need to be optimized to maximize energy recovery in the finished biofuel. A nominal 1 ton per day (TPD) catalytic biomass pyrolysis system was designed based on the laboratory experimental data. The system was designed to achieve the short residence times (0.5–2 sec) and high heat transfer rates required for maximum liquid biocrude yields while optimizing process integration to maintain catalyst activity by continuous regeneration. The catalytic biomass pyrolysis reactor is a continuously circulating single-loop transport reactor design that is flexible enough to allow sensitivity studies around temperature, residence time, biomass feed rate, and catalyst-to-biomass ratio (i.e., catalyst circulation rate) for process optimization. For a nominal 100 lb/hr feed rate of dry biomass, the products include ~25 lb/hr char and coke, ~20 lb/hr permanent gases, and ~55 lb/hr condensable vapors. Pyrolysis temperatures are 350–600°C, and the system is operated close to ambient pressure. Production of the catalyst developed within the project was scaled up to provide enough material (200kg) for bench-scale testing. The 1TPD bench-scale unit was fabricated, installed and commissioned with this project. Biocrude samples from wood were produced in this unit with the CFP catalyst with material balance > 90%. The intermediate biocrude yields and chemical composition compare well with previous laboratory results and a hydroprocessing strategy for upgrading the resulting biocrude was developed. The experimental results obtained within this project were used to develop a process model for a 2000 TPD commercial facility. Detailed flow sheets were developed for all major unit operations in the process and provided a basis for an economic analysis to develop capital and operating costs. Estimates of the biofuel production costs were used to develop internal rates of return for the yields and compositions measured for the current state of technology at the end of this project and for the yields anticipated for an optimized (nth plant) scenario as additional process improvements are made.

09 BIOMASS FUELS↗

Invertible neural networks for real-time control of extrusion additive manufacturing

Material extrusion additive manufacturing (AM) has enabled an elegant fabrication pathway for a vast material library. Nonetheless, each material requires optimization of printing parameters generally determined through significant trial-and-error testing. To eliminate arduous, iteration-based optimization approaches, many researchers have used machine learning (ML) algorithms which provide opportunities for automated process optimization. Here, in this work, we demonstrate the use of an ML-driven approach for real-time material extrusion print-parameter optimization through in-situ monitoring of printed line geometry. To do this, we use deep invertible neural networks (INNs) which can solve both forward and inverse, or optimization, problems using a single network. By combining in-situ computer vision and deep INNs, the printing parameters can be autonomously optimized to print a target line width in 1.2 s. Furthermore, defects that occur during printing can be rapidly identified and corrected autonomously. The methods developed and presented in this work eliminate user-intensive, time-consuming, and iterative parameter discovery approaches that currently limit accelerated implementation of extrusion-based AM processes. Furthermore, the presented approach can be generalized to provide real-time monitoring and optimization pathways for increasingly complex AM environments.

36 MATERIALS SCIENCE↗

Multivariate Predictive Analytics of Wind Power Data for Robust Control of Energy Storage

Short-term forecasting is frequently identified as an important tool for the effective management of wind generation. However, forecasting errors, inherent to the point forecasts, increase requirements for energy storage and can affect optimal system operation. Probabilistic forecasts can help tackle this issue by providing a proper characterization of forecasting errors in the optimization process. This paper proposes a multivariate model of forecasting data for wind generation. Predictive uncertainty intervals of wind power can be obtained by sampling from the proposed model. The main goal is to use empirical data models without linear or Gaussian approximations of the distributional or temporal variations. The predictive modeling is utilized within a case study of an energy storage system. Finally, a modified robust convex programming is used to maintain the practical robustness and feasibility of the solution based on the sampled scenarios from the model.

17 WIND ENERGY↗

Enhancing Molecular Alignment and Charge Transport of Solution-Sheared Semiconducting Polymer Films by the Electrical-Blade Effect

Controlling polymer chain alignment through processing is a means of tuning the charge transport of solution-based conjugated polymers. In this work, a processing strategy is proposed in which an external electric field (E-field) is applied to the coating blade (E-blade) to align polymer chain during solution-shearing, a meniscus-guided coating technique. A theoretical model based on dielectrophoresis quantitatively describes and predicts the alignment process and is used to guide the selection of the optimal conditions of the applied E-field. Using these conditions, more than two-fold increase in chain alignment is observed for E-bladed thin films of a diketopyrrolopyrrole (DPP) semiconducting polymer without affecting other morphological aspects such as film thickness, film coverage or fiber-like aggregation. Organic field effect transistors based on the E-bladed DPP polymer are fabricated at ambient conditions and over areas of a few cm2. They display a 3-fold improvement in their mobilities and a strong enhancement in charge transport anisotropy compared to films prepared without E-field. These results reveal a synergistic alignment effect from both the solution-shearing process and the applied E-field, and introduce a novel and general approach to control the morphology and the electrical properties of solutioncoated conjugated polymer thin films.

42 ENGINEERING↗

A Synergistic Combination of Advanced Separation and Chemical Scale Inhibitor Technologies for Efficient Use of Imparied Water As Cooling Water in Coal-based Power Plants

Nalco Company is partnering with Argonne National Laboratory (ANL) in this project to jointly develop advanced scale control technologies that will provide cost-effective solutions for coal-based power plants to operate recirculating cooling water systems at high cycles using impaired waters. The overall approach is to use combinations of novel membrane separations and scale inhibitor technologies that will work synergistically, with membrane separations reducing the scaling potential of the cooling water and scale inhibitors extending the safe operating range of the cooling water system. The project started on March 31, 2006 and ended in August 30, 2010. The project was a multiyear, multi-phase project with laboratory research and development as well as a small pilot-scale field demonstration. In Phase 1 (Technical Targets and Proof of Concept), the objectives were to establish quantitative technical targets and develop calcite and silica scale inhibitor chemistries for high stress conditions. Additional Phase I work included bench-scale testing to determine the feasibility of two membrane separation technologies (electrodialysis ED and electrode-ionization EDI) for scale minimization. In Phase 2 (Technology Development and Integration), the objectives were to develop additional novel scale inhibitor chemistries, develop selected separation processes, and optimize the integration of the technology components at the laboratory scale. Phase 3 (Technology Validation) validated the integrated system's performance with a pilot-scale demonstration. During Phase 1, Initial evaluations of impaired water characteristics focused on produced waters and reclaimed municipal wastewater effluents. Literature and new data were collected and evaluated. Characteristics of produced waters vary significantly from one site to another, whereas reclaimed municipal wastewater effluents have relatively more uniform characteristics. Assessment to date confirmed that calcite and silica/silicate are two common potential cycle-limiting minerals for using impaired waters. For produced waters, barium sulfate and calcium sulfate are two additional potential cycle-limiting minerals. For reclaimed municipal wastewater effluents, calcium phosphate scaling can be an issue, especially in the co-presence of high silica. Computational assessment, using a vast amount of Nalco's field data from coal fired power plants, showed that the limited use and reuse of impaired waters is due to the formation of deposit caused by the presence of iron, high hardness, high silica and high alkalinity in the water. Appropriate and cost-effective inhibitors were identified and developed - LL99B0 for calcite and gypsum inhibition and TX-15060 for silica inhibition. Nalco's existing dispersants HSP-1 and HSP-2 has excellent efficacy for dispersing Fe and Mn. ED and EDI were bench-scale tested by the CRADA partner Argonne National Laboratory for hardness, alkalinity and silica removal from synthetic make-up water and then cycled cooling water. Both systems showed low power consumption and 98-99% salt removal, however, the EDI system required 25-30% less power for silica removal. For Phase 2, the EDI system's performance was optimized and the length of time between clean-in-place (CIP) increased by varying the wafer composition and membrane configuration. The enhanced EDI system could remove 88% of the hardness and 99% of the alkalinity with a processing flux of 19.2 gal/hr/m{sup 2} and a power consumption of 0.54 kWh/100 gal water. Bench tests to screen alternative silica/silicate scale inhibitor chemistries have begun. The silica/silicate control approaches using chemical inhibitors include inhibition of silicic acid polymerization and dispersion of silica/silicate crystals. Tests were conducted with an initial silica concentration of 290-300 mg/L as SiO{sub 2} at pH 7 and room temperature. A proprietary new chemistry was found to be promising, compared with a current commercial product commonly used for silica/silicate control. Additional pilot cooling tower testing confirmed the bench study. We also developed a molecule to inhibit calcium carbonate precipitation and calcium sulfate precipitation at high supersaturations. During Phase 3, a long-term test of the EDI system and scale inhibitors was done at Nalco's cooling tower water testing facility, producing 850 gallons of high purity water (90+% salt removal) at a rate of 220 L/day. The EDI system's performance was stable when the salt concentration in the concentrate compartment (i.e. the EDI waste stream) was controlled and a CIP was done after every 48 hours of operation time. A combination of EDI and scale inhibitors completely eliminated blowdown discharge from the Pilot cooling Tower. The only water-consumption came from evaporation, CIP and EDI concentrate. Silica Inhibitor was evaluated in the field at a western coal fired power plant.

01 COAL, LIGNITE, AND PEAT↗

AEOLUS: Advances in Experimental Design, Optimal Control, and Learning for Uncertain Complex Systems

Sustained advances in the mathematics of modeling and simulation have resulted in the capability today for routine simulation of a number of large scale complex DOE-relevant systems. As remarkable as this capability for solving the so-called forward problem is, it is typically only the first step-an inner loop within an outer loop that explores the simulation model's parameter space and decision space to characterize uncertainty in the model's predictions, learn unknown model parameters from data, design the most informative experiments, determine optimal control strategies, and create optimal designs. Broadly, what unifies all of these outer loop problems is that they are, in one form or another, optimization problems over parameter/control/design space that are constrained by complex uncertain models. To fully realize the power of scientific simulation as a basis for scientific discovery, technological innovation, and rational decision-making, it is imperative to move beyond simulation to tackle the outer loop of optimization for learning from data, experimental design, and control with complex uncertain models. When the models under consideration are large-scale and complex, and when the optimization variable and uncertain parameter spaces are high (or infinite) dimensional, this constitutes a grand challenge of the highest order, and is intractable with conventional methods. To overcome these challenges, the AEOLUS Center was established to develop a unified mathematical, computational, and statistical framework for (1) Learning predictive models from complex data via Bayesian inference and optimization, and (2) Optimizing experiments, processes, and designs using the resulting uncertain models. These problems are intractable with conventional methods, for several reasons: (1) The simulation problems that govern the inner loops of the optimization problems are expensive to execute (due to severe nonlinearity, heterogeneity, multiphysics/multiscale coupling); (2) The optimization variable and uncertain parameter spaces are high dimensional, often stemming from discretizations of infinite dimensional fields such as initial conditions, sources, or material properties. We argue that the key to overcoming these challenges is to develop new mathematical, computational, and statistical methods that exploit the structure of the Bayesian inference and optimization problems mediated by their underlying complex uncertain models. This structure includes the regularity, sparsity, geometry, low intrinsic dimensionality, and multifidelity nature of the maps from uncertain parameter/optimization variable spaces to the specific objectives targeted: Bayesian inference, optimal experimental design, and optimal control design. Black box methods developed as generic tools are incapable of exploiting this structure. To be successful, we must create, integrate, and cross-fertilize ideas across multiple areas of applied math--including approximation theory, Bayesian inference, data science, experimental design, information theory, machine learning, model reduction, optimal control theory, parallel algorithms, PDE-constrained optimization, randomized algorithms, stochastic optimization, and uncertainty quantification--all while exploiting the structure of the problems at hand. With this goal in mind, we have marshaled a team of leading authorities in these areas. While the methods we develop will be broadly applicable across a wide spectrum of DOE problems in which experiments inform models and the systems those models describe must be optimized under uncertainty, we have chosen a specific area, advanced manufacturing and materials, to drive our work. AMM is characterized by complex models across multiple scales, and is a rich source of challenging problems in inference, experimental design, and optimal control, requiring multifaceted and integrated advances in applied mathematics. As such, AMM serves as an excellent vehicle to motivate and demonstrate the advances in applied mathematics developed by our center.

97 MATHEMATICS AND COMPUTING↗

Accelerated development of CuSbS 2 thin film photovoltaic device prototypes

Development of alternative thin film photovoltaic technologies is an important research topic because of the potential of low-cost, high-efficiency solar cells to produce terawatt levels of clean power. However, this development of unexplored yet promising absorbers can be hindered by complications that arise during solar cell fabrication. Here, a high-throughput combinatorial method is applied to accelerate development of photovoltaic devices, in this case, using the novel CuSbS2 absorber via a newly developed three-stage self-regulated growth process to control absorber purity and orientation. Photovoltaic performance of the absorber, using the typical substrate CuInxGa1 - xSe2 (CIGS) device architecture, is explored as a function of absorber quality and thickness using a variety of back contacts. This study yields CuSbS2 device prototypes with ~1% conversion efficiency, suggesting that the optimal CuSbS2 device fabrication parameters and contact selection criteria are quite different than for CIGS, despite the similarity of these two absorbers. The CuSbS2 device efficiency is at present limited by low short-circuit current because of bulk recombination related to defects, and a small open-circuit voltage because of a theoretically predicted cliff-type conduction band offset between CuSbS2 and CdS. Overall, these results illustrate both the potential and limits of combinatorial methods to accelerate the development of thin film photovoltaic devices using novel absorbers.

14 SOLAR ENERGY↗

Flash graphene from rubber waste

Most conventional production processes for graphene are time-consuming, solvent-intensive, and energetically demanding. To circumvent these limitations for mass production, flash Joule heating (FJH) has been shown to be an effective method to synthesize graphene. Here, methods for optimizing production of graphene from rubber waste feedstocks are shown. Through careful control of system parameters, such as pulse voltage and pulse time, turbostratic flash graphene (tFG) can be produced from rubber waste. It is characterized by Raman spectroscopy, X-ray diffraction and thermogravimetric analysis. Here, the resulting tFG can be easily exfoliated and dispersed into various solvents because of its turbostratic arrangement. Addition of tFG into Portland cement results in a significant increase in the compressive strength of the composite. From a materials perspective, FJH offers a facile and inexpensive method for producing high quality tFG from rubber waste materials, which would otherwise be disposed of in landfills or burned for fuel. FJH allows for upcycling of low-value rubber waste into high-value carbon nanomaterials for use as reinforcing additives.

54 ENVIRONMENTAL SCIENCES↗

Regulating cellular trace metal economy in algae

As indispensable protein cofactors, Fe, Mn, Cu and Zn are at the center of multifaceted acclimation mechanisms that have evolved to ensure extracellular supply meets intracellular demand. In starting with selective transport at the plasma membrane and ending in protein metalation, metal homeostasis in algae involves regulated trafficking of metal ions across membranes, intracellular compartmentalization by proteins and organelles, and metal-sparing/recycling mechanisms to optimize metal-use efficiency. Overlaid on these processes are additional circuits that respond to the metabolic state as well as to the prior metal status of the cell. Here, we focus on recent progress made toward understanding the pathways by which the single-celled, green alga Chlamydomonas reinhardtii controls its cellular trace metal economy. We also compare these mechanisms to characterized and putative processes in other algal lineages. Photosynthetic microbes continue to provide insight into cellular regulation and handling of Cu, Fe, Zn and Mn as a function of the nutritional supply and cellular demand for metal cofactors. We found that new experimental tools such as RNA-Seq and subcellular metal imaging are bringing us closer to a molecular understanding of acclimation to supply dynamics in algae and beyond.

59 BASIC BIOLOGICAL SCIENCES↗

MSC – DFEM Model for the Sintering of Ceramic Nuclear Fuels

Ceramic nuclear fuel pellets represent the fuel of choice for most of the civilian nuclear reactors worldwide. Therefore, it is reasonable to expect the use of ceramic uranium-oxide pellets will continue for many years to come, because an extensive infrastructure is in place to support this strategic component of the energy industry, the technology is well-established and profitable, and the manufacturing process is flexible with the potential to support fuel reprocessing within the existing infrastructure. A better understanding of the properties of the starting materials, improving the control of the processes that are used to fabricate fuel pellets and understanding how the properties of these pellets change in service, represent important aspects that are being studied via experiments, models and simulations. A close integration of these approaches is essential if we are to find new ways to optimize both the fuel composition and structure for the purpose of improving performance and reducing costs.

Material Science↗

Biopolymer Concrete

Cement production for concrete has been responsible for ~7–8% of global greenhouse gas (GHG) emissions, and nearly equally contribution for steel production processes (EPA, 2020). In order to achieve carbon neutrality by 2050, a novel solution has to be investigated. This project aims to develop fundamental mechanistic understanding and experimental characterization to create a 3D printable biopolymer concrete using plant-based polyurethane as an innovative and sustainable alternative for Portland cement concrete, with significantly low carbon footprint. Future construction will utilize the advances in digital additive manufacturing (3D printing) to produce optimal geometries with a minimum waste of materials. Understanding the polymerization process, factors impacting the composite rheology, and the structural behavior of this biopolymer concrete will enable us to engineer the next generation of concrete structures with low carbon footprint. This project aims to improve the nation’s ability to control Greenhouse Gas emission neutrality for the set goal of 2050 via introducing a structurally viable bio-based polymer concrete.

42 ENGINEERING↗