Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

High-spin spectroscopy in {sup 125}Xe

Levels excited up to 39.8 MeV and 119/2 units of angular momentum have been populated in {sup 125}Xe by the {sup 82}Se({sup 48}Ca,5n){sup 125}Xe reaction. High-fold {gamma}-ray coincidence events were measured using the Gammasphere Ge detector array. Nine regular rotational bands extending from levels identified previously up to almost 60 ({h_bar}/2{pi}) have been identified, and three of these have been connected to low-lying levels having well-established spins and parities. Configurations have been assigned to six of the bands based on alignment properties, band crossings, and comparison with theoretical cranked shell model calculations (CSM). Transition quadrupole moments have been measured for these bands in the spin range 31-55 ({h_bar}/2{pi}) and were found to be in agreement with the CSM calculations. The corresponding quadrupole deformation {epsilon}{sub 2} ranges from 0.28 to 0.34 at a {gamma} deformation of 0 deg. and from 0.29 to 0.36 at a {gamma} value of 5 deg.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gamow-Teller strength distributions for {beta}{beta}-decaying nuclei within continuum quasiparticle random-phase approximation

An isospin-self-consistent pn-continuum-QRPA approach is formulated and applied to describe the Gamow-Teller strength distributions for {beta}{beta}-decaying open-shell nuclei. Calculation results obtained for the pairs of nuclei {sup 76}Ge-Se, {sup 100}Mo-Ru, {sup 116}Cd-Sn, and {sup 130}Te-Xe are compared with available experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing particle and nuclear physics models of neutrinoless double beta decay with different nuclei

Half-life estimates for neutrinoless double beta decay depend on particle physics models for lepton-flavor violation, as well as on nuclear physics models for the structure and transitions of candidate nuclei. Different models considered in the literature can be contrasted - via prospective data - with a 'standard' scenario characterized by light Majorana neutrino exchange and by the quasiparticle random phase approximation, for which the theoretical covariance matrix has been recently estimated. We show that, assuming future half-life data in four promising nuclei ({sup 76}Ge, {sup 82}Se, {sup 130}Te, and {sup 136}Xe), the standard scenario can be distinguished from a few nonstandard physics models, while being compatible with alternative state-of-the-art nuclear calculations (at 95% C.L.). Future signals in different nuclei may thus help to discriminate at least some decay mechanisms, without being spoiled by current nuclear uncertainties. Prospects for possible improvements are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simulation of multi-photon emission isotopes using time-resolved SimSET multiple photon history generator

Abstract-Multiple-photon emitters, such as In-111 or Se-75, have enormous potential in the field of nuclear medicine imaging. For example, Se-75 can be used to investigate the bile acid malabsorption and measure the bile acid pool loss. The simulation system for emission tomography (SimSET) is a well-known Monte Carlo simulation (MCS) code in nuclear medicine for its high computational efficiency. However, current SimSET cannot simulate these isotopes due to the lack of modeling of complex decay scheme and the time-dependent decay process. To extend the versatility of SimSET for simulation of those multi-photon emission isotopes, a time-resolved multiple photon history generator based on SimSET codes is developed in present study. For developing the time-resolved SimSET (trSimSET) with radionuclide decay process, the new MCS model introduce new features, including decay time information and photon time-of-flight information, into this new code. The half-life of energy states were tabulated from the Evaluated Nuclear Structure Data File (ENSDF) database. The MCS results indicate that the overall percent difference is less than 8.5% for all simulation trials as compared to GATE. To sum up, we demonstrated that time-resolved SimSET multiple photon history generator can have comparable accuracy with GATE and keeping better computational efficiency. The new MCS code is very useful to study the multi-photon imaging of novel isotopes that needs the simulation of lifetime and the time-of-fight measurements. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Study of Se and Cl segregation in poly-crystalline CdSeTe

CdTe based thin film solar cells have shown to be competitive in terms of efficiency and low cost, but the polycrystalline structure and low minority carrier lifetime constrain CdTe based devices from reaching the theoretical efficiency limit. In this work, the effect of Se and Cl segregation in polycrystalline CdSeTe photovoltaic devices was studied. We demonstrated using two-photon time-resolved photoluminescence (TRPL) that the Se alloyed CdSeTe absorber layer shows high minority carrier lifetime, and used density functional theory (DFT) calculations to explain the origin of such high lifetime.

cadmium compounds↗

Radionuclide inventory of vitrified waste after spent nuclear fuel reprocessing at La Hague

The primary aim of the present work was to determine the inventories of the radionuclides and stable elements in vitrified high-level waste produced at La Hague and delivered to Germany, which are of importance for long-term safety assessment of final repositories for radioactive wastes. For a subset of these radionuclides and stable elements, the inventories were determined - either by direct measurements or by involving established correlations - and reported by AREVA. This allowed verification of the validity of application of a model approach utilizing the data of burnup and activation calculations and auxiliary information on the reprocessing and vitrification process operated at La Hague. Having proved that such a model approach can be applied for prediction of inventories of actinides, fission and activation products in vitrified waste, the present work estimated the minimum, average and maximum inventories of the radionuclides, which are of importance for long-term safety assessment of final repositories for radioactive waste but were not reported by AREVA for delivered CSD-V canisters. The average and maximum inventories in individual CSD-V canisters predicted in the present approach were compared to the inventories predicted by Nagra for canisters with vitrified waste delivered from La Hague to Switzerland [1]. This comparison revealed a number of differences between these inventories despite the fact that the canisters delivered to Switzerland were produced in essentially the same way and from the common reprocessing waste stock as CSD-V canisters delivered to Germany. Therefore, a further work is required in order to identify the reason for the discrepancy in the present estimation versus the Nagra estimation [1]. Such a work should also address the recommendation by the international peer review of the Safety Report of the Project Opalinus Clay to obtain estimates of the inventories of long-lived mobile radionuclides (such as {sup 14}C, {sup 36}Cl, {sup 79}Se, and {sup 129}I), which contribute most to the dose estimates in the radiological safety assessments, if possible, in agreement with other countries with similar waste streams in order for a coordinated set of data to be generated [2]. Since vitrified waste from reprocessing of spent nuclear fuel at La Hague was delivered to several countries - Belgium, France, Germany, Japan, Netherlands, and Switzerland - an international effort can be recommended. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Phase identification and control of thin films deposited by co-evaporation of elemental Cu, Zn, Sn, and Se

Kesterite thin films [(i.e., Cu{sub 2}ZnSn(S,Se){sub 4} and related alloys] have been the subject of recent interest for use as an absorber layer for thin film photovoltaics due to their high absorption coefficient (>10{sup 4} cm{sup -1}), their similarity to successful chalcopyrites (like CuInxGa{sub 1-x}Se{sub 2}) in structure, and their earth-abundance. The process window for growing a single-phase kesterite film is narrow. In this work, we have documented, for our 9.15%-efficient kesterite co-evaporation process, (1) how appearance of certain undesirable phases are controlled via choice of processing conditions, (2) several techniques for identification of phases in these films with resolution adequate to discern changes that are important to device performance, and (3) reference measurements for those performing such phase identification. Data from x-ray diffraction, x-ray fluorescence, Raman scattering, scanning electron microscopy, energy dispersive spectroscopy, and current-voltage characterization are presented.

36 MATERIALS SCIENCE↗

Laser processing for thin film chalcogenide photovoltaics: a review and prospectus

We review prior and on-going works in using laser annealing (LA) techniques in the development of chalcogenide-based [CdTe and Cu(In,Ga)(S,Se) 2 ] solar cells. LA can achieve unique processing regimes as the wavelength and pulse duration can be chosen to selectively heat particular layers of a thin film solar cell or even particular regions within a single layer. Pulsed LA, in particular, can achieve non-steady-state conditions that allow for stoichiometry control by preferential evaporation, which has been utilized in CdTe solar cells to create Ohmic back contacts. Pulsed lasers have also been used with Cu(In,Ga)(S,Se) 2 ] to improve device performance by surface-defect annealing as well as bulk deep-defect annealing. Continuouswave LA shows promise for use as a replacement for furnace annealing as it almost instantaneously supplies heat to the absorbing film without wasting time or energy to bring the much thicker substrate to temperature. Optimizing and utilizing such a technology would allow production lines to increase throughput and thus manufacturing capacity. Lasers have also been used to create potentially low-cost chalcogenide thin films from precursors, which is also reviewed.

14 SOLAR ENERGY↗

TU-AB-201-08: Rotating Shield High Dose Rate Brachytherapy with 153Gd and 75Se Isotopes

Purpose: To introduce rotating shield brachytherapy (RSBT) for different cancer sites with {sup 153}Gd and {sup 75}Se isotopes. RSBT is a form of intensity modulated brachytherapy, using shielded rotating catheters to provide a better dose distribution in the tumour while protecting healthy tissue. Methods: BrachySource, a Geant4-based Monte Carlo dose planning system was developed for investigation of RSBT with {sup 153}Gd and {sup 75}Se for different cancer sites. Dose distributions from {sup 153}Gd, {sup 75}Se and {sup 192}Ir isotopes were calculated in a 40 cm radius water phantom by using the microSelectron-v2 source model. The source was placed inside a cylindrical platinum shield with 1.3 mm diameter. An emission window coinciding with the active core of the source was created by removing half (180°) of the wall of the shield. Relative dose rate distributions of the three isotopes were simulated. As a proof of concept, a breast cancer patient originally treated with Mammosite was re-simulated with unshielded {sup 192}Ir and shielded {sup 153}Gd. Results: The source with the lowest energy, {sup 153}Gd, decreased the dose on the shielded side by 91%, followed by {sup 75}Se and {sup 192}Ir with 36% and 16% reduction at 1 cm from the source. The breast cancer patient simulation showed the ability of shielded {sup 153}Gd to spare the chest wall by a 90% dose reduction when only one emission window angle is considered. In this case, fully covering the PTV would require more delivery angles and the chest wall dose reduction would be less, however, the simulation demonstrates the potential of shielded {sup 153}Gd to selectively isolate organs at risk. Conclusion: Introducing {sup 153}Gd and {sup 75}Se sources combined with RSBT will allow escalation of dose in the target volume while maintaining low doses in radiation sensitive healthy tissue. Tailoring treatments to each individual patient by treating all parts of the tumour without over-irradiation of normal tissues will be possible. The author acknowledges partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant number: 432290), and the Quebec Fonds de recherche Nature et Technologies.

60 APPLIED LIFE SCIENCES↗

Study of the Optical Properties of CdZnSe/ZnS-Quantum Dot–Au-Nanoparticle Complexes

The interaction of gold nanoparticles (NPs) and semiconductor alloyed CdZnSe/ZnS quantum dots (QDs) in colloidal solutions is studied. It is shown that the photoluminescence intensity of QDs in a mixture decreases compared to that in the initial QD solution, which is caused by resonance nonradiative energy transfer from QDs to Au NPs in spontaneously formed aggregates. To control the formation of pairs of interacting QDs and Au NPs, we proposed have a method for creating QD–Au NP complexes bound by special molecules—ligands. It is shown that the morphology and optical properties of the samples obtained depend on the method of their preparation, in particular, on the chemical environment of QDs. It is found that the complexes form in the case of addition of hydrophilic Au NPs to hydrophobic QDs and that this almost does not change the optical properties of the latter compared to those of quasi-isolated QDs in colloidal solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of polymer matrix on structure of Se particles formed in aqueous solutions during redox process

Transmission electron microscopy and X-ray energy dispersive microanalysis study of the structure of particles formed during the reduction of Se(IV) to Se(0) in aqueous solutions in the presence of amphiphilic polymers showed the formation of Se/polymer composite particles. The content of carbon inside the particles can be as large as 80 at %. Polymers deeply influence the structure of particles. Depending on polymers, the composite particles may be unstable with time and they spontaneously evolve from Se/polymer composite particles to crystalline particles of monoclinic Se. For the stable ones, addition of bacterial cellulose Acetobacter xylinum gel-film can induce crystallization in the particles which expel the polymeric material. The Se/polymer composite particles and Se crystalline particles exhibit different sensitivity to electron irradiation and stiffness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure of Ga{sub 0.5}In{sub 1.5}Se{sub 3} solid solution

A solid solution of the GaIn{sub 3}Se{sub 6} (2Ga{sub 0.5}In{sub 1.5}Se{sub 3}) composition with a hexagonal lattice (a = 7.051(3) Å, c = 19.148(2) Å, sp. gr. P6{sub 1}, z = 6, V = 824.4332(4) Å{sup 3}, ρ = 5.379(2) g/cm{sup 3}) has been synthesized as a result of alloying Ga, In, and Se elements with a metal ratio of 1: 3. It was established that six out of nine In atoms in the lattice are located in a trigonal bipyramid, while the other three In atoms and three Ga atoms have a tetrahedral coordination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fractal simulation of the resistivity and capacitance of arsenic selenide

The temperature dependences of the ac resistivity R and ac capacitance C of arsenic selenide were measured more than four decades ago [V. I. Kruglov and L. P. Strakhov, in Problems of Solid State Electronics, Vol. 2 (Leningrad Univ., Leningrad, 1968)]. According to these measurements, the frequency dependences are R {proportional_to} {omega}{sup -0.80{+-}0.01} and {Delta}C {proportional_to} {omega}{sup -0.120{+-}0.006} ({omega} is the circular frequency and {Delta}C is measured from the temperature-independent value C{sub 0}). According to fractal-geometry methods, R {proportional_to} {omega}{sup 1-3/h} and {Delta}C {proportional_to} {omega}{sup -2+3/h}, where h is the walk dimension of the electric current in arsenic selenide. Comparison of the experimental and theoretical results indicates that the walk dimensions calculated from the frequency dependences of resistivity and capacitance are h{sub R} = 1.67 {+-} 0.02 and h{sub C} = 1.60 {+-} 0.08, which are in agreement with each other within the measurement errors. The fractal dimension of the distribution of conducting sections is D = 1/h = 0.6. Since D < 1, the conducting sections are spatially separated and form a Cantor set.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time dependence of the Hanle effect in the emission of triplet bound excitons in gallium selenide

The dynamics of the magnetic-field-induced depolarization of the circularly polarized radiation of spin-oriented triplet bound excitons in uniaxial crystals has been studied by time-resolved spectroscopy on an example of GaSe. The depolarization of radiation (the Hanle effect) is due to the difference between the behaviors of its {sigma}{sup +} and {sigma}{sup -} components in a magnetic field. It has been found that the magnetic-field dependences of the {sigma}{sup +} and {sigma}{sup -} component intensities vary considerably within the lifetime t of the excited states. The form of the magnetic-field dependence of the degree of polarization of the exciton radiation remains generally the same for various t values. A theoretical description of these effects has been proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant photoemission and absorption spectroscopy of the Cu{sub x}TiSe{sub 2} compound

Single crystals of the Cu{sub x}TiSe{sub 2} compound with x = 0.05, 0.09, and 0.33 have been grown. Resonance photoelectron Cu 3p-3d and 2d-3d spectra of the valence bands, the spectra of the core levels, and the L absorption spectra for titanium and copper have been obtained. It is shown that the degree of oxidation of titanium atoms is +4 and the state of copper atoms is close to the state of free copper ions. It is found that the spectra of the valence bands obtained under the Cu 3p and 2p resonance conditions radically differ. For the spectra in the Cu 2p excitation regime, several bands corresponding to different decay channels of the excited state are observed. According to calculations of the density of states, the 3d states of copper are filled incompletely; the occupancy of the 3d band of copper is 9.5 electrons per atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Some Properties of Fe{sub 1 +y}Se{sub x}Te{sub 1 –x} Single Crystals in the Superconducting and Normal States

Despite a large number of publications proving that a number of different materials can be classified as topological insulators, unambiguous proofs of the existence of promising topological superconductors have not been obtained as yet. The implementation of such systems is important not only for solid state physics, but also for applications, because topological superconductors can be used in quantum computers. We have made an attempt to confirm experimentally the assumption put forth in a number of theoretical publications that FeSe{sub x}Te{sub 1 –x} with the s-wave pairing, which is the simplest iron-containing superconductors, can become, under certain conditions, a topological superconductor with the π-wave pairing, which must have a superconducting gap in the bulk and the Majorana gapless surface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗