Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Microwave absorbance properties of zirconium–manganese substituted cobalt nanoferrite as electromagnetic (EM) wave absorbers

Highlights: • Good candidates for EM materials with low reflectivity. • Good candidates for broad bandwidth at microwave frequency. • Microwave absorbing bandwidth was modulated simply by manipulating the Zr–Mn. • Higher the Zr–Mn content, the higher absorption rates for the electromagnetic radiation. • The predicted reflection loss shows that this can be used for thin ferrite absorber. - Abstract: Nanocrystalline Zr–Mn (x) substituted Co ferrite having chemical formula CoFe{sub 2−2x}Zr{sub x}Mn{sub x}O{sub 4} (x = 0.1–0.4) was prepared by co-precipitation technique. Combining properties such as structural, electrical, magnetic and reflection loss characteristics. Crystal structure and surface morphology of the calcined samples were characterized by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). By using two point probe homemade resistivity apparatus to find resistivity of the sample. Electromagnetic (EM) properties are measured through RF impedance/materials analyzer over 1 MHz–3 GHz. The room-temperature dielectric measurements show dispersion behavior with increasing frequency from 100 Hz to 3 MHz. Magnetic properties confirmed relatively strong dependence of saturation magnetization on Zr–Mn composition. Curie temperature is also found to decrease linearly with addition of Zr–Mn. Furthermore, comprehensive analysis of microwave reflection loss (RL) is carried out as a function of substitution, frequency, and thickness. Composition accompanying maximum microwave absorption is suggested.

36 MATERIALS SCIENCE↗

Synthesis, characterization and optical properties of hybrid PVA–ZnO nanocomposite: A composition dependent study

Graphical abstract: - Highlights: • ZnO nanoparticles were prepared by solution combustion method. • PVA–ZnO nanocomposites were synthesized by solution casting method. • Doped and undoped films were characterized using different techniques. • Red shift in optical band gap was observed in Nanocomposite films with respect to nano ZnO. • Photoluminescence intensity was found to be optimum for PVA–10 mol% ZnO nanocomposite film. - Abstract: Nanocomposites of poly vinyl alcohol (PVA) and ZnO have been synthesized using the solution casting technique for different concentrations of nano ZnO powder prepared by low temperature solution combustion method. The formation of polymer nanocomposite and changes in the structural and micro structural properties of the materials were investigated by X-ray diffraction, Energy dispersive X ray spectroscopy and optical microscopy techniques (FTIR and UV–Visible). The surface morphology of PVA–ZnO nanocomposite films were elucidated using Scanning Electron Microscopy. The optical absorption spectrum of nano ZnO shows blue shift in the optical band gap energy with respect to characteristic bulk ZnO at room temperature, whereas PVA–ZnO hybrid films show red shift with respect to nano ZnO. The photoluminescence studies show that the intensity of the blue emission (470 nm) varies with change in concentration of ZnO with an optimum intensity observed at 10 mol% of ZnO.

36 MATERIALS SCIENCE↗

Electrical properties of samarium cobaltite nanoparticles synthesized using Sol–Gel autocombustion route

Highlights: • The structural evolution and its electrical properties of samarium cobaltite nanograins are discussed. • Optimization of SmCoO{sub 3} nanograins is achieved by post sintering as-prepared gel at 800 °C. • The impedance spectra indicate the semiconducting behavior SmCoO{sub 3} nanograins. - Abstract: Nanograins of SmCoO{sub 3} are prepared by citric acid assisted Sol–Gel autocombustion route. The characterizations of crystal structure, surface morphology and electrical properties of SmCoO{sub 3} powder are done using XRD, HRSEM, FTIR and BDS. The structural evolution of SmCoO{sub 3} upon increasing the annealing temperature is followed using XRD and FTIR analyses. The powder sample contains polycrystalline grains with average size equal to 35 nm and orthorhombic perovskite structure with Pbnm space group. The vibrational bands observed in FTIR spectrum at 545 cm{sup −1} and 439 cm{sup −1} correspond to Co-O stretching modes in cobaltite system. HRSEM images of the sample show the formation of hexagonal shaped grains of samarium cobaltite. The AC electrical conductivity of 4.914 × 10{sup −5} S cm{sup −1} at 295 K is measured for SmCoO{sub 3} nanoparticles. The impedance spectra bring out the semiconducting behavior of the material.

36 MATERIALS SCIENCE↗

Photocatalytic activity of titania coatings synthesised by a combined laser/sol–gel technique

Highlights: • Sol–gel method was used to prepare titania coatings. • Titania thin films were coated on substrate surface by dip coating. • Fibre laser was employed to irradiate the titania coated surfaces. • Photocatalytic efficiency of titania coatings was significantly improved after laser processing. - Abstract: Titania coatings were prepared using sol–gel method and then applied on the substrate surface by dip coating. Fibre laser (λ = 1064 nm) in continuous wave mode was used to irradiate the titania coated surfaces at different specific energies. The ATR-FTIR, XRD, SEM, EDS and contact angle measurement were employed to analyse surface morphology, phase composition and crystalline structure of laser-irradiated titania coatings, whilst the photocatalytic activity was evaluated by measuring the decomposition of methylene blue (MB) after exposure to the visible light for various illumination times. Results showed that the laser-irradiated titania coatings demonstrate significant different composition and microstructure in comparison with the as-coated from the same sol–gel titania. Photocatalytic efficiency of titania coatings was significantly improved after laser processing. The photocatalytic activity of laser-irradiated titania coatings was higher than that of the as-coated titania. The titania coating processed at laser specific energy of 6.5 J/mm{sup 2} exhibited the highest photocatalytic activity among all titania samples.

36 MATERIALS SCIENCE↗

Synthesis, microstructure, and electronic band structure properties of nanocrystalline neodymium-doped bismuth titanate ferroelectric films fabricated by the sol–gel method

Graphical abstract: X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices. - Abstract: Bi{sub 4−x}Nd{sub x}Ti{sub 3}O{sub 12} (BNT) films with different Nd contents (from 0 to 1 with 0.25 intervals) are prepared by the sol–gel process. The Nd substitution effects on the preferred orientation, surface morphology, phonon modes, emission bands, andelectronic band structures of the BNT films are investigated by microscopy, Raman scattering, photoluminescence, and spectroscopic ellipsometry (SE) at room temperature. X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices.

36 MATERIALS SCIENCE↗

Synthesis and characterization of (Bi{sub 0.5}Ba{sub 0.5}) (Fe{sub 0.5}Ti{sub 0.5}) O{sub 3} ceramic

Graphical abstract: Temperature variation of (a) dielectric constant (b) dielectric loss of the sample. - Highlights: • The high values of dielectric permittivity and low value of tangent loss. • It used for microwave applications. • The impedance and dielectric relaxation in the material is non exponential and non Debye-type. • Its ac conductivity obeys Jonscher universal power law. - Abstract: The polycrystalline sample of (Bi{sub 0.5}Ba{sub 0.5}) (Fe{sub 0.5}Ti{sub 0.5}) O{sub 3} (BF–BT) was prepared by a standard mixed oxide method. Analysis of room temperature XRD pattern and Raman/FTIR spectra of the compound does not exhibit any change in its crystal structure of BaTiO{sub 3} on addition of BiFeO{sub 3} in equal ratio. The surface morphology of the gold-plated sintered pellet sample recorded by SEM (scanning electron microscope) exhibits a uniform distribution of grains with less porosity. Detailed studies of nature and quantity of variation of dielectric constant, tangent loss, and polarization with temperature and frequency indicate the existence of ferroelectric phase transition at high-temperature. There is a low-temperature anti-ferromagnetic phase transition below 375 °C in the material. Detailed studies of electrical properties (impedance, modulus, etc.) of the material confirmed a strong correlation between micro-structure and properties.

36 MATERIALS SCIENCE↗

Novel nanocomposites based on polythiophene and zirconium dioxide

Highlights: • Crystallinity of polythiophene decreased with doping process. • Zirconium dioxide changed the surface morphology of PT significantly. • Doping process increased the glass transition temperature of polythiophene. • Charge transport mechanism of all samples is consistent with CBH model. - Abstract: This paper reports charge transport mechanism of polythiophene (PT) and its nanocomposites having various weight of zirconium dioxide (ZrO{sub 2}). Fourier transform infrared (FT-IR) spectral studies showed that the Zr ions mostly affected the C−S bond of the polythiophene. X-ray diffraction (XRD) patterns indicated that ZrO{sub 2} powder was a mixture of monoclinic (64.62%) and tetragonal (35.38%) phase. XRD measurements revealed that crystallinity of PT decreased with increasing doping level. Significant morphological differences were observed in scanning electron microscopy (SEM) images of PT depending on the doping process. Thermal analysis carried out by differential scanning calorimetry (DSC) indicated that the doping processes increased glass transition temperature of PT. The alternating current (ac) conductivity mechanism analysis by universal power law indicated that charge transport mechanism of both PT and PT/ZrO{sub 2} nanocomposites was consistent with correlated barrier hopping (CBH) model. The doping process and frequency affected the hopping distance between the sites.

36 MATERIALS SCIENCE↗

Synthesis, characterization, electrical and dielectric studies of AgCuI and Co-SnO{sub 2} composite solid electrolytes

Highlights: • The SCI–CDS composites were characterized by XRD, Far IR and SEM. • Conductivity reached 1.29 × 10{sup −4} S/cm at room temperature for x = 0.4 composition. • The value of dielectric constant decreases with the increase of frequency. - Abstract: The composite solid electrolytes of AgCuI (SCI) and Co-SnO{sub 2} (CDS) were prepared by direct mixing method. The phase structure, composition and surface morphology of the composites were explained by X-ray diffraction (XRD), Far infrared spectroscopy (Far IR) and Scanning electron microscopy (SEM). AC impedance spectroscopy revealed that the ionic conductivity was effectively increased with the increase of temperature. Presence of a semicircle in the impedance spectra shows the greater contribution of grain than the grain boundary. Addition of CDS particles enhanced the ionic conductivity of the composites, reached a maximum value σ = 1.29 × 10{sup −4} S cm{sup −1} at room temperature for x = 0.4 composition. The dielectric values of the composite were gradually increased upon increasing the temperature, followed by a sharp change observed at 440 K. The electrical modulus of the sample was decreased with the increase of temperature and exhibits a single relaxation.

36 MATERIALS SCIENCE↗

Electrical and structure properties for the alloy system Ce{sub x}La{sub 1−x}O{sub y} nanostructure thin films

Highlights: • Glassy Ce{sub x}La{sub 1−x}O{sub y} nanostructure films were grown on Si(1 0 0) substrate using the sol–gel method. • G{sub p} = ωϵ{sub 0}ϵ′ tan(δ) was calculated at different temperatures. • Electrical and structural the Ce{sub x}La{sub 1−x}O{sub y} samples were studied. • The conductivity-temperature study shows that the compound obeys the Arrhenius law. - Abstract: The Ce{sub x}La{sub 1−x}O{sub y} samples are synthesized, characterized and their electrical properties are reported at different molar ratios in the frequency range of 10{sup −1}–10{sup +5} Hz. Ac conductivity and permittivity data are analyzed by using conductivity formalism. The values of capacitance and tan(δ) were recorded with respect to different frequencies and temperatures. X-ray diffraction (XRD) patterns of the films show that the films posses crystalline phases. Surface morphology of the films is analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses reveal that elemental composition is in right stoichiometry. Electrical characterizations of the Ce{sub x}La{sub 1−x}O{sub y} samples were done by capacitance–voltage (C–V) and current density–voltage (J–V) measurements of MOS structures. Investigation showed high value of k = 44.80 and low leakage current (∼1 × 10{sup −5} A/cm{sup 2}) of the Ce{sub 0.4}La{sub 0.6}O{sub y} film.

36 MATERIALS SCIENCE↗

Effect of nano particle sizes on the third-order optical non-linearities and nanostructure of copolymer P3HT:PCBM thin film for organic photovoltaics

Highlights: • Active layer (P3HT:PCBM) has been deposited on substrate type by spin coating at 1000 rpm. • The device was completed by evaporating a 60 nm thick, circular gold electrodes onto the P3HT:PCBM. • Nonlinear refractive indices of the three particle sizes are found to be of the order of 10{sup −7} cm{sup 2}/W - Abstract: Organic solar cells are based on (3-hexylthiophene):[6,6]-phenyl C61-butyric acid with methyl ester Bulk Heterojunction. An inverted structure has been fabricated using nano-anatase crystalline titanium dioxide, as the electron transport layer, which was prepared on either the Indium Tin Oxide coated glass (ITO—glass), or Silicon wafer, as well as on glass substrates by the sol–gel method, at different spin speed, using the spin-coating system. The effect of thickness on the surface morphology and on the optical properties of TiO{sub 2} layer, was investigated using the Atomic Force Microscopy (AFM), X-ray diffraction, and UV–visible spectrophotometer. The samples were examined to feature currents and voltages, in the darkness and light extraction efficiency of the solar cell. The highest open-circuit voltage, V{sub oc}, and power conversion efficiency were 0.66% and 0.39%, fabricated with 90 nm, respectively. The non-linear optical properties of nano-anatase TiO{sub 2} sol–gel, were investigated at different particle sizes, using the z-scan technique.

36 MATERIALS SCIENCE↗

Effect of deposition temperature on the structural and optical properties of CdSe QDs thin films deposited by CBD method

Highlights: • Synthesis of CdSe QDs with L-Cysteine capping agent for applications in nanodevices. • The films of CdSe QDs present uniform and good dispersive particles at the surface. • Effect of bath temperature on the structural and optical properties of CdSe QDs thin films. • Investigation of the optical constants and dispersion parameters of CdSe QDs thin films. - Abstract: Cadmium selenide quantum dots (CdSe QDs) thin films were deposited onto glass substrates by a chemical bath deposition (CBD) method at different temperatures from an aqueous solution containing L-Cysteine (L-Cys) as capping agent. The evolution of the surface morphology and elemental composition of the CdSe films were studied by AFM, SEM, and EDX analyses. Structural and optical properties of CdSe thin films were investigated by XRD, UV–vis and PL spectroscopy. The dispersion behavior of the refractive index is described using the single oscillator Wemple-DiDomenico (W-D) model, and the physical dispersion parameters are calculated as a function of deposition temperature. The dispersive optical parameters such as average oscillator energy (E{sub o}), dispersion energy (E{sub d}), and static refractive index (n{sub o}) were found to vary with the deposition temperature. Besides, the electrical free carrier susceptibility (χ{sub e}) and the carrier concentration of the effective mass ratio (N/m*) were evaluated according to the Spitzer-Fan model.

36 MATERIALS SCIENCE↗

Annealing induced microstructure engineering of antimony tri-selenide thin films

Highlights: • Deposition of Sb{sub 2}Se{sub 3} thin films using thermal vapour deposition. • Films are deposited on substrates with concurrent heating and without heating. • Effect of post deposition annealing on the two types of films are investigated. • Influence of temperature and processing conditions on optical band gap are probed. • This Sb{sub 2}Se{sub 3} films can find application in solar cells and optoelectronic devices. - Abstract: The presented work demonstrates the effect of annealing on the structural, surface morphology and optical properties of Antimony Triselenide (Sb{sub 2}Se{sub 3}) thin films deposited by thermal evaporation. Two sets of thin films of Sb{sub 2}Se{sub 3} were grown on soda lime glass (SLG) substrates by thermal evaporation with and without substrate heating. Both sets of films were then annealed at three distinct temperatures (100 °C, 200 °C and 300 °C) to study the effects of annealing on the microstructure. Analysis using XRD (X-Ray Diffraction) characterization revealed that the as-deposited films without substrate heating exhibit an amorphous nature, whereas the films grown with concurrent substrate heating are polycrystalline with orthorhombic structure. The films annealed at high temperature with concurrent substrate heating possess smooth and continuous grain morphologies. The effect of annealing was also found to have significant impact on the band gap and optical properties of the Sb{sub 2}Se{sub 3} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced DSSCs performance of TiO2 nanostructure by surface passivation layers

Highlights: • Passivation layers of MgO, CaCO{sub 3}, ZrO{sub 2} and SnO{sub 2} on TiO{sub 2} electrode deposited in copper container by spin coating method. • XRD and EDX analysis give detail information about surface passivation layers deposition on TiO{sub 2} electrode. • Achieved highest efficiency for electrode with MgO passivation layer it is about 6.05%. • Highest electron lifetime of 0.65 ms. - Abstract: Rutile titanium oxide (TiO{sub 2}) synthesized in copper containers, was spin-coated with different surface passivation layers such as magnesium oxide (MgO), calcium carbonate (CaCO{sub 3}), zirconium oxide (ZrO{sub 2}), and tin oxide (SnO{sub 2}). The deposition of these passivation layers on TiO{sub 2} confirmed with the help of XRD and EDX analysis, leads to changes in surface morphology induced by the passivation layers demonstrated by FE-SEM imaging. The highest photoconversion efficiency obtained for TiO{sub 2} electrode with MgO passivation layer (6.05%), respective incident photon conversion efficiency was 52%. After introduction of passivation layers on the TiO{sub 2} nanostructure, electron lifetime increased from 0.48 ms to 0.65 ms and charge transfer resistance decreased from 36.9 Ω cm (pristine TiO{sub 2} electrode) to 20.16 Ω cm (MgO passivation layer).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reinforcing blade-cast photocatalytic-titania thin film by titanate nanotubes

Highlights: • Suspension-based photocatalysts are inferior to thin-films due to separation issues. • Hydrothermal TiO{sub 2} nanotubes and sol-gel Ti(n-OBu){sub 4} blends were tape casted on glass. • Optimum blend composition yields mechanical stability due to the tubes reinforcing effect. • At optimum gel content the nanotube bundles are smoothed without stabilizers added. • Surface accessibility and mass transfer dominate the photocatalytic dye degradation. - Abstract: Titanate nanotubes/titania gel blends were prepared as composite sol-gel material, deposited on a glass substrate using a doctor blade and calcined in order to create thin films. In order to get an insight in titania nanotubes’ ability to reinforce thin films, drying control chemical agents were not used. The effects of titanate nanotubes to titanium n-butoxide ratio on surface morphology, phase composition, mechanical stability and photocatalytic activity were studied. Characterization of the thin films was carried out by means of optical and scanning electron microscopy, powder X-ray diffraction, synchrotron radiation grazing incidence X-ray diffraction and mechanical stability testing. Photocatalytic properties of the obtained thin films were evaluated on the basis of methylene blue degradation. Moderate blends exhibit favourable microstructural features while the dye degradation rate was greater for films with a greater amount of titanate nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Control synthesis of bismuth sulphide films and their application for laser detectors

Highlights: • Bi{sub 2}S{sub 3} films have been synthesized via a facile hydrothermal process. • We fabricated Bi{sub 2}S{sub 3} films-based laser detectors successfully. • The photoelectric properties were studied upon 450 nm, 650 nm and 850 nm laser beam. • The laser detectors exhibit excellent photoconductive performance. • We found Prolonging the reaction time was beneficial for the photoelectric performance. - Abstract: Herein, we utilize a facile hydrothermal process for the synthesis of Bi{sub 2}S{sub 3} films on the SnO{sub 2}: F films (FTO) substrate. The structure, surface morphology and thickness of the samples were characterized by variously analysis method. The Bi{sub 2}S{sub 3} films-based laser detectors exhibit excellent linear photocurrent characteristics, good sensitivity to 450 nm, 650 nm and 850 nm laser beam. Prolonging the reaction time was beneficial for the photoelectric performance of the Bi{sub 2}S{sub 3} films-based laser detectors. The photoelectric conversion properties can be improved by optimizing the thickness of the films. The experimental results of this work can provide an additional opportunity for fabricating excellent photoconductive performance laser detectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid scalable plasma processing of thin-film Li–La–Zr–O solid-state electrolytes

Solid-state electrolytes, such as lithium lanthanum zirconium oxide (LLZO), show promise as technologies for next-generation high-energy-density batteries, but commercial development has been hindered by a lack of scalable processing methods. Current fabrication methods are costly or require long annealing steps to create dense films. We report an atmospheric pressure blown-arc nitrogen plasma jet process to rapidly form sub-micrometer-thick, dense amorphous LLZO (a-LLZO) films from sol-gel precursors. Films are processed in less than 2 min, an order of magnitude faster than what has previously been reported. We demonstrate 500-nm-thick a-LLZO films processed at 350°C with an ionic conductivity of 2 × 10 −6 S/cm at 30°C and 2 × 10 −3 S/cm at 100°C and a conductance of 19 S at 100°C, the highest conductance of any LLZO phase to date. Here, the films exhibit outstanding smooth surface morphology with low defectivity, advancing atmospheric plasma processing as a scalable processing method for solid-state electrolytes.

25 ENERGY STORAGE↗

Unveiling the structural transformations in glassy solid electrolyte adapted to high-stress cycles

Brittleness of glass–ceramic and ceramic ion conductors is considered as a main roadblock for their implementation as electrolytes in solid-state batteries where the fractures often occur due to the pressure exerted by metallic lithium. In this regard, nano- and micro-scale ductility of the solid electrolyte allows reducing such pressure without formation of cracks. Among different types of solid state ion conductors, phosphate invert glasses seem to be promising in achieving such ductility. We report the mechanical behavior of lithium phosphorous oxynitride (LiPON) invert glass probed by static and cyclic nanoindentation. Repeated application of high intensity stress results in densification and shear deformation of material allowing LiPON to accommodate the ~ 22% nominal strain imposed by the nanoindenter without cracking. Ability to do this under repeated loading indicates robustness of LiPON when used in lithium metal batteries under cyclic charge and discharge. Using Raman spectroscopy with unsupervised K-means clustering we reveal pressure-induced formation of P 2 O 7 units which migrate to the periphery of the residual hardness impressions with cycling resulting in surface morphology of LiPON superficially similar to that of deformed bulk metallic glass.

36 MATERIALS SCIENCE↗

Thermo-mechanical deterioration and molecular degradation of 3D-printed methacrylate-based polymer in various chemical environments

The advancement of additive manufacturing (AM) has accelerated the development of stereolithographic (SLA) photo-curable resins, particularly methacrylate-based polymers, due to the ability to their high-resolution, robust mechanical properties, and suitability. However, their long-term performance in chemical environments remains poorly understood. This study investigates the extent and mechanisms of degradation on an SLA-printed methacrylate-based polymer subjected to various chemicals, including polar and non-polar solvents, as well as strongly acidic aqueous solutions over a 12-week accelerated aging period. A comprehensive analytical approach incorporating swelling kinetics, surface morphology, tensile and dynamic mechanical analysis (DMA), Fourier-transform infrared (FTIR) spectroscopy, and mass spectrometry (MS) was employed to characterize chemical absorption, structural integrity, and leached products. Results reveal that degradation severity is governed by both the polarity and reactivity of the chemical environment. Notably, exposure to 6 mol L -1 HNO₃ induced the most severe deterioration, with over threefold higher swelling compared to other media, and significant reductions in tensile strength, tensile modulus, and glass transition temperature (T g ). In contrast, specimens aged in non-polar solvents (xylene and dodecane) exhibited negligible chemical interaction and retained mechanical performance. FTIR and MS analyses identified acid-catalyzed hydrolysis of ester groups as prominent degradation pathways in acidic media, while diffusion-controlled plasticization prevailed in polar solvents. Furthermore, this study provides valuable insights into the chemical stability of SLA-printed polymers and develops predictive degradation profiles that are crucial for designing durable polymer systems for advanced industrial use.

36 MATERIALS SCIENCE↗