Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D INTEGRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Data Movement Dominates: Advanced Memory Technology to Address the Real Exascale Power Problem

Energy is the fundamental barrier to Exascale supercomputing and is dominated by the cost of moving data from one point to another, not computation. Similarly, performance is dominated by data movement, not computation. The solution to this problem requires three critical technologies: 3D integration, optical chip-to-chip communication, and a new communication model. The central goal of the Sandia led "Data Movement Dominates" project aimed to develop memory systems and new architectures based on these technologies that have the potential to lower the cost of local memory accesses by orders of magnitude and provide substantially more bandwidth. Only through these transformational advances can future systems reach the goals of Exascale computing with a manageable power budgets. The Sandia led team included co-PIs from Columbia University, Lawrence Berkeley Lab, and the University of Maryland. The Columbia effort of Data Movement Dominates focused on developing a physically accurate simulation environment and experimental verification for optically-connected memory (OCM) systems that can enable continued performance scaling through high-bandwidth capacity, energy-efficient bit-rate transparency, and time-of-flight latency. With OCM, memory device parallelism and total capacity can scale to match future high-performance computing requirements without sacrificing data-movement efficiency. When we consider systems with integrated photonics, links to memory can be seamlessly integrated with the interconnection network-in a sense, memory becomes a primary aspect of the interconnection network. At the core of the Columbia effort, toward expanding our understanding of OCM enabled computing we have created an integrated modeling and simulation environment that uniquely integrates the physical behavior of the optical layer. The PhoenxSim suite of design and software tools developed under this effort has enabled the co-design of and performance evaluation photonics-enabled OCM architectures on Exascale computing systems.

97 MATHEMATICS AND COMPUTING↗

Proposing an Abstracted Interface and Protocol for Computer Systems

While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices becomes increasingly blurred. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years, including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory, storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enables relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly designed to provide both the performance and flexibility to support new system integration solutions

97 MATHEMATICS AND COMPUTING↗

Proposing an Abstracted Interface and Protocol for Computer Systems

While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices become s increasingly blurred. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years , including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory, storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enables relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly designed to provide both the performance and flexibility to support new system integration solutions.

97 MATHEMATICS AND COMPUTING↗

Characterization of Pliocene and Miocene Formations in the Wilmington Graben, Offshore Los Angeles, for Large-Scale Geologic Storage of CO₂

Geomechanics Technologies has completed a detailed characterization study of the Wilmington Graben offshore Southern California area for large-scale CO₂ storage. This effort has included: an evaluation of existing wells in both State and Federal waters, field acquisition of about 175 km (109 mi) of new seismic data, new well drilling, development of integrated 3D geologic, geomechanics, and fluid flow models for the area. The geologic analysis indicates that more than 796 MMt of storage capacity is available within the Pliocene and Miocene formations in the Graben for midrange geologic estimates (P50). Geomechanical analyses indicate that injection can be conducted without significant risk for surface deformation, induced stresses or fault activation. Numerical analysis of fluid migration indicates that injection into the Pliocene Formation at depths of 1525 m (5000 ft) would lead to undesirable vertical migration of the CO₂ plume. Recent well drilling however, indicates that deeper sand is present at depths exceeding 2135 m (7000 ft), which could be viable for large volume storage. For vertical containment, injection would need to be limited to about 250,000 metric tons per year per well, would need to be placed at depths greater than 7000ft, and would need to be placed in new wells located at least 1 mile from any existing offset wells. As a practical matter, this would likely limit storage operations in the Wilmington Graben to about 1 million tons per year or less. A quantitative risk analysis for the Wilmington Graben indicate that such large scale CO₂ storage in the area would represent higher risk than other similar size projects in the US and overseas.

54 ENVIRONMENTAL SCIENCES↗

Fuel properties to enable lifted-flame combustion

The Fuel Properties to Enable Lifted-Flame Combustion project responded directly to solicitation DE-FOA-0000239 AOI 1A, Fuels and Lubricants for Advanced Combustion Regimes. This subtopic was intended to encompass clean and highly-efficient, liquid-fueled combustion engines to achieve extremely low engine-out nitrogen oxides (NOx) and particulate matter (PM) as a target and similar efficiency as state-of-the-art direct injection diesel engines. The intent of this project was to identify how fuel properties can be used to achieve controllable Leaner Lifted Flame Combustion (LLFC) with low NOx and PM emissions. Specifically, this project was expected to identify and test key fuel properties to enable LLFC and their compatibility with current fuel systems and to enhance combustion models to capture the effect of fuel properties on advanced combustion. Successful demonstration of LLFC may reduce the need for after treatment devices, thereby reducing costs and improving thermal efficiency. The project team consisted of key technical personnel from Ford Motor Company (FMC), the University of Wisconsin-Madison (UW), Sandia National Laboratories (SNL) and Lawrence Livermore National Laboratories (LLNL). Each partner had key roles in achieving project objectives. FMC investigated fuel properties relating to LLFC and sooting tendency. Together, FMC and UW developed and integrated 3D combustion models to capture fuel property combustion effects. FMC used these modeling results to develop a combustion system and define fuel properties to support a single-cylinder demonstration of fuel-enabled LLFC. UW investigated modeling the flame characteristics and emissions behavior of different fuels, including those with different cetane number and oxygen content. SNL led spray combustion experiments to quantify the effect of key fuel properties on combustion characteristics critical for LLFC, as well as single cylinder optical engine experiments to improve fundamental understanding of flame lift-off, generate model validation data, and demonstrate LLFC concurrent with FMC efforts. Additionally, LLNL was added to the project during the second year to develop a detailed kinetic mechanism for a key oxygenate to support CFD modeling. Successful completion of this project allowed the team to enhance fundamental understanding of LLFC, improve the state of current combustion models and increase understanding of desired fuel properties. This knowledge also improves our knowledge of how cost effective and environmentally friendly renewable fuels can assist in helping meet future emission and greenhouse gas regulations.

Kurtz, Eric↗

Development and Refinement of Bison Models for Higher Burnup Application

Electric Power Research Institute (EPRI) is an international research organization funded by organizations in the energy and government sectors. The company conducts research to tackle the energy challenges of its member organizations. In support of the U.S. nuclear industry, EPRI and Idaho National Laboratory were awarded a U.S. Department of Energy Technology Commercialization Fund to develop a loss of coolant accident (LOCA) analysis tool. This tool was developed to support burnup extension activities by supplementing the existing capabilities of operators of existing large light-water reactor plants. The tool couples INL developed codes Bison and RELAP5-3D for advanced simulation of LOCA behavior. The project consists of seven major tasks, one of which is the development and refinement of Bison models for higher burnup applications. This task is broken down into six targeted areas of development and refinement including: formation of high burnup structure, fuel fracture and pulverization, transient fission gas release, axial gas communication within a fuel rod, cladding ballooning and burst, and axial fuel relocation. This report summarizes the models for both the fuel and cladding in Bison for high burnup application, identifies the areas of development and refinement necessary to enhance the Bison capabilities to be used in the coupled simulation tool with RELAP5-3D. Integration and regression testing to demonstrate proper implementation of the new features in Bison is highlighted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In Situ Study on Cu-to-Cu Thermal Compression Bonding

Cu-to-Cu thermal compression bonding (TCB) has emerged as a promising solution for ultrafine pitch packaging in 3D integrated circuit technologies. Despite the progress made by conventional Cu-to-Cu TCB methods in achieving good mechanical strength of the Cu bonds, the bonding processes generally require high temperature and high pressure, which may degrade the performance and reliability of the device. Therefore, it is imperative to investigate the processing parameters to understand the bonding mechanism and achieve effective TCB at a low temperature and low pressure. Here, we developed an in situ TCB technique inside a scanning electron microscope. The in situ TCB method enables a real-time observation of bonding development, which provides critical insights into how the texture and microstructure of Cu bumps may influence the creep and surface diffusion during the bonding process. This work features a strategy to advance our understanding of the bonding mechanisms and provides insight into tailoring the microstructure of Cu for bonding at a low temperature and low pressure.

36 MATERIALS SCIENCE↗

The Evolution of the Tully–Fisher Relation between z ∼ 2.3 and z ∼ 0.9 with KMOS{sup 3D}

We investigate the stellar mass and baryonic mass Tully–Fisher relations (TFRs) of massive star-forming disk galaxies at redshift z∼2.3 and z∼0.9 as part of the KMOS{sup 3D} integral field spectroscopy survey. Our spatially resolved data allow reliable modeling of individual galaxies, including the effect of pressure support on the inferred gravitational potential. At fixed circular velocity, we find higher baryonic masses and similar stellar masses at z∼2.3 as compared to z∼0.9. Together with the decreasing gas-to-stellar mass ratios with decreasing redshift, this implies that the contribution of dark matter to the dynamical mass on the galaxy scale increases toward lower redshift. A comparison to local relations reveals a negative evolution of the stellar and baryonic TFR zero points from z = 0 to z∼0.9, no evolution of the stellar TFR zero point from z∼0.9 to z∼2.3, and a positive evolution of the baryonic TFR zero point from z∼0.9 to z∼2.3. We discuss a toy model of disk galaxy evolution to explain the observed nonmonotonic TFR evolution, taking into account the empirically motivated redshift dependencies of galactic gas fractions and the relative amount of baryons to dark matter on galaxy and halo scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Observational and Modeling Studies of Radiative, Chemical, and Dynamical Interactions in the Earth''s Atmosphere

A 3-dimensional model was developed to support mechanistic studies. The model solves the global primitive equations in isentropic coordinates, which directly characterize diabatic processes forcing the Brewer-Dobson circulation of the middle atmosphere. It's numerical formulation is based on Hough harmonics, which partition horizontal motion into its rotational and divergent components. These computational features, along with others, enable 3D integrations to be performed practically on RISC computer architecture, on which they can be iterated to support mechanistic studies. The model conserves potential vorticity quite accurately under adiabatic conditions. Forced by observed tropospheric structure, in which integrations are anchored, the model generates a diabatic circulation that is consistent with satellite observations of tracer behavior and diabatic cooling rates. The model includes a basic but fairly complete treatment of gas-phase photochemistry that represents some 20 chemical species and 50 governing reactions with diurnally-varying shortwave absorption. The model thus provides a reliable framework to study transport and underlying diabatic processes, which can then be compared against chemical and dynamical structure observed and in GCM integrations. Integrations with the Langley GCM were performed to diagnose feedback between simulated convection and the tropical circulation. These were studied in relation to tropospheric properties controlling moisture convergence and environmental conditions supporting deep convection, for comparison against mechanistic integrations of wave CISK that successfully reproduce the Madden-Julian Oscillation (MJO) of the tropical circulation. These comparisons were aimed at identifying and ultimately improving aspects of the convective simulation, with the objective of recovering a successful simulation of the MJO in the Langley GCM, behavior that should be important to budgets of upper-tropospheric water vapor and chemical species.

Salby, Murry↗

NeMO-Net – The Neural Multi-Modal Observation & Training Network for Global Coral Reef Assessment

We present NeMO-Net, the Srst open-source deep convolutional neural network (CNN) and interactive learning and training software aimed at assessing the present and past dynamics of coral reef ecosystems through habitat mapping into 10 biological and physical classes. Shallow marine systems, particularly coral reefs, are under significant pressures due to climate change, ocean acidification, and other anthropogenic pressures, leading to rapid, often devastating changes, in these fragile and diverse ecosystems. Historically, remote sensing of shallow marine habitats has been limited to meter-scale imagery due to the optical effects of ocean wave distortion, refraction, and optical attenuation. NeMO-Net combines 3D cm-scale distortion-free imagery captured using NASA FluidCam and Fluid lensing remote sensing technology with low resolution airborne and spaceborne datasets of varying spatial resolutions, spectral spaces, calibrations, and temporal cadence in a supercomputer-based machine learning framework. NeMO-Net augments and improves the benthic habitat classification accuracy of low-resolution datasets across large geographic ad temporal scales using high-resolution training data from FluidCam.NeMO-Net uses fully convolutional networks based upon ResNet and ReSneNet to perform semantic segmentation of remote sensing imagery of shallow marine systems captured by drones, aircraft, and satellites, including WorldView and Sentinel. Deep Laplacian Pyramid Super-Resolution Networks (LapSRN) alongside Domain Adversarial Neural Networks (DANNs) are used to reconstruct high resolution information from low resolution imagery, and to recognize domain-invariant features across datasets from multiple platforms to achieve high classification accuracies, overcoming inter-sensor spatial, spectral and temporal variations.Finally, we share our online active learning and citizen science platform, which allows users to provide interactive training data for NeMO-Net in 2D and 3D, integrated within a deep learning framework. We present results from the PaciSc Islands including Fiji, Guam and Peros Banhos 1 1 2 1 3 1 where 24-class classification accuracy exceeds 91%.

Chirayath, Ved↗

Front and backside processed thin film electronic devices

This invention provides methods for fabricating thin film electronic devices with both front- and backside processing capabilities. Using these methods, high temperature processing steps may be carried out during both frontside and backside processing. The methods are well-suited for fabricating back-gate and double-gate field effect transistors, double-sided bipolar transistors and 3D integrated circuits.

Yuan, Hao-Chih↗

Analysis of Photonic Networks for a Chip Multiprocessor Using Scientific Applications

As multiprocessors scale to unprecedented numbers of cores in order to sustain performance growth, it is vital that these gains are not nullified by high energy consumption from inter-core communication. With recent advances in 3D Integration CMOS technology, the possibility for realizing hybrid photonic-electronic networks-on-chip warrants investigating real application traces on functionally comparable photonic and electronic network designs. We present a comparative analysis using both synthetic benchmarks as well as real applications, run through detailed cycle accurate models implemented under the OMNeT++ discrete event simulation environment. Results show that when utilizing standard process-to-processor mapping methods, this hybrid network can achieve 75X improvement in energy efficiency for synthetic benchmarks and up to 37X improvement for real scientific applications, defined as network performance per energy spent, over an electronic mesh for large messages across a variety of communication patterns.

97 MATHEMATICS AND COMPUTING↗

Single Pass Electron Cooling Simulations for MEIC

Cooling of medium energy protons is critical for the proposed Jefferson Lab Medium Energy Ion Collider (MEIC). We present simulations of electron cooling of protons up to 60 GeV. In the beam frame in which the proton and electrons are co-propagating, their motion is non-relativistic. We use a binary collision model which treats the cooling process as the sum of a large number of two-body collisions which are calculated exactly. This model can treat even very close collisions between an electron and ion with high accuracy. We also calculate dynamical friction using a delta-f PIC model. The code VSim (formerly Vorpal) is used to perform the simulations. We compare the friction rates with that obtained by a 3D integral over electron velocities which is used by BETACOOL.

43 PARTICLE ACCELERATORS↗

LUNUS, Version 0.1a

LUNUS software for generating 3D maps of diffuse scattering from macromolecular X-ray crystallography diffraction images. A set of tools needed for advanced refinement of crystal structures and crystallographic charge density models. Includes tools for processing X--ray diffraction images, charge density maps, and structure factors for analysis of diffuse X-ray scattering and charge density variations in crystallography. Specific methods include: elementary algebraic operations on images and 3D lattices; fourier transform of images and 3D lattices; image processing to measure diffuse intensity; crystallographic refinement; and 3D integration of diffuse intensity.

Wall, Michael↗

Epitaxial growth of in-plane nanowires and nanowire devices

Exemplary embodiments provide semiconductor nanowires and nanowire devices/applications and methods for their formation. In embodiments, in-plane nanowires can be epitaxially grown on a patterned substrate, which are more favorable than vertical ones for device processing and three-dimensional (3D) integrated circuits. In embodiments, the in-plane nanowire can be formed by selective epitaxy utilizing lateral overgrowth and faceting of an epilayer initially grown in a one-dimensional (1D) nanoscale opening. In embodiments, optical, electrical, and thermal connections can be established and controlled between the nanowire, the substrate, and additional electrical or optical components for better device and system performance.

Lee, Seung Chang↗

Epitaxial growth of in-plane nanowires and nanowire devices

Exemplary embodiments provide semiconductor nanowires and nanowire devices/applications and methods for their formation. In embodiments, in-plane nanowires can be epitaxially grown on a patterned substrate, which are more favorable than vertical ones for device processing and three-dimensional (3D) integrated circuits. In embodiments, the in-plane nanowire can be formed by selective epitaxy utilizing lateral overgrowth and faceting of an epilayer initially grown in a one-dimensional (1D) nanoscale opening. In embodiments, optical, electrical, and thermal connections can be established and controlled between the nanowire, the substrate, and additional electrical or optical components for better device and system performance.

Lee, Seung Chang↗

Epitaxial growth of in-plane nanowires and nanowire devices

Exemplary embodiments provide semiconductor nanowires and nanowire devices/applications and methods for their formation. In embodiments, in-plane nanowires can be epitaxially grown on a patterned substrate, which are more favorable than vertical ones for device processing and three-dimensional (3D) integrated circuits. In embodiments, the in-plane nanowire can be formed by selective epitaxy utilizing lateral overgrowth and faceting of an epilayer initially grown in a one-dimensional (1D) nanoscale opening. In embodiments, optical, electrical, and thermal connections can be established and controlled between the nanowire, the substrate, and additional electrical or optical components for better device and system performance.

Lee, Seung Chang↗

PIXEL2020: Tenth International Workshop on Semiconductor Pixel Detectors for Particles and Imaging

This workshop covers various topics related to pixel detector technology. Development and applications will be discussed for charged particle tracking in High Energy Physics, Nuclear Physics, Astrophysics, and X-ray imaging in Astronomy, Biology, Medicine and Material Science. The conference program will also include reports on front and back end electronics, radiation effects, low mass mechanics and construction techniques, and new technologies such as monolithic and 3D integrated detectors.

Sally, Seidel↗