Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Numerical analysis of atomic density distribution in arc driven negative ion sources

The purpose of this study is to calculate atomic (H{sup 0}) density distribution in JAEA 10 ampere negative ion source. A collisional radiative model is developed for the calculation of the H{sup 0} density distribution. The non-equilibrium feature of the electron energy distribution function (EEDF), which mainly determines the H{sup 0} production rate, is included by substituting the EEDF calculated from 3D electron transport analysis. In this paper, the H{sup 0} production rate, the ionization rate, and the density distribution in the source chamber are calculated. In the region where high energy electrons exist, the H{sup 0} production and the ionization are enhanced. The calculated H{sup 0} density distribution without the effect of the H{sup 0} transport is relatively small in the upper region. In the next step, the effect should be taken into account to obtain more realistic H{sup 0} distribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast electron spin resonance controlled manipulation of spin injection into quantum dots

In our spin-injection light-emitting diodes, electrons are spin-polarized in a semimagnetic ZnMnSe spin aligner and then injected into InGaAs quantum dots. The resulting electron spin state can be read out by measuring the circular polarization state of the emitted light. Here, we resonantly excite the Mn 3d electron spin system with microwave pulses and perform time-resolved measurements of the spin dynamics. We find that we are able to control the spin polarization of the injected electrons on a microsecond timescale. This electron spin resonance induced spin control could be one of the ingredients required to utilize the quantum dot electrons or the Mn spins as qubits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron correlation and incipient flat bands in the Kagome superconductor CsCr 3 Sb 5

Correlated kagome materials exhibit a compelling interplay between lattice geometry, electron correlation, and topology. In particular, the flat bands near the Fermi level provide a fertile playground for novel many-body states. Here we investigate the electronic structure of CsCr 3 Sb 5 using high-resolution angle-resolved photoemission spectroscopy and ab-initio calculations. Our results suggest that Cr 3d electrons are intrinsically incoherent, showing strong electron correlation amplified by Hund’s coupling. Notably, we identify incipient flat bands close to the Fermi level, which are expected to significantly influence the electronic properties of the system. Across the density-wave-like transition at 55 K, we observe a drastic enhancement of the electron scattering rate, which aligns with the semiconducting-like property at high temperatures. These findings establish CsCr 3 Sb 5 as a strongly correlated Hund’s metal with incipient flat bands near the Fermi level, which provides an electronic basis for understanding its novel properties compared to the weakly correlated AV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The interaction of reactants, intermediates and products with Cu ions in Cu-SSZ-13 NH3 SCR catalysts: An energetic and ab initio X-ray absorption modeling study

Copper-exchanged SSZ-13 (Cu-SSZ-13) provides excellent catalytic activity and hydrothermal stability in the selective catalytic reduction (SCR) of NOx by using NH3 as a reductant. In this contribution, we compare the most likely positions for Cu with a single charge compensating Al atom (ZCu), including the effect of the adsorption of reactants, intermediates and products of a NH3 SCR reaction by using first-principles calculations based on density functional theory. We find that the 6-membered ring (6MR) site is the most energetically favorable while the 8-membered ring (8MR) sites are less favorable with energy differences about 0.5 eV with respect to the 6MR site. Upon molecular adsorption, the energy differences between Cu in the 8MR and 6MR sites decreases and almost disappears, which means that the thermodynamic stability of ZCu with molecularly adsorbed species is nearly identical for Cu in different sites. Considering more complicated scenarios of NO (or CO) adsorption, we find that the co-adsorption of 2 NO (or 2 CO) molecules weakens their interaction with Cu, as well as their co-adsorption with OH and H2O. The X-ray absorption near edge structure (XANES) of Cu in Cu-SSZ-13 under different conditions was also modeled from first principles. We find that the pre-edge feature in the K-edge XANES of Cu in clean Cu-SSZ-13 with Cu in a 8MR site is induced by a 1s to 4s transition while there is no pre-edge peak when Cu is in a 6MR site. Molecular adsorption onto Cu in a 6MR or a 8MR site results in the same K-edge XANES. When NO is adsorbed onto Cu in SSZ-13, we find that the origin of the small pre-edge peak in the K-edge XANES lies in a 1s to 3d electron transition. On the other hand, when CO or N2 is adsorbed onto an isolated Cu atom in SSZ-13, a transition from the 1s state to the hybridized state of 3d and 4p results in a pre-edge peak in the K-edge of the XANES spectrum. It is also found that the edge position and intensity of the maximum peak of Cu K-edge XANES depend on the Cu locations and the adsorbed molecules. By studying the Cu K-edge XANES of ZCu with adsorption of species of different oxidizing power, we conclude that a higher oxidation state of Cu will result in a higher energy edge position in the Cu K-edge XANES. These results are expected to greatly aid our understanding of Cu-SSZ-13 SCR catalysts. This work was supported by institutional funds provided to JSM from the Voiland School of Chemical Engineering and Bioengineering. Financial support was also provided by the National Science Foundation GOALI program under contract Nos. CBET-1258717, CBET-1258715 and CBET-1258690. We thank Prof. Fabio Ribeiro, Mr. Atish Parekh, Prof. W. F. Schneider, Mr. Christopher Paolucci, Mr. Trunjoyo Anggara and Prof. Jeff Miller for stimulating discussions on the modeling of the XANES spectrum and Ms. Alyssa Hensley for her comments on the manuscript. J.Sz. acknowledges the financial support of this work by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Program. A portion of the computer time for the computational work was performed using EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at PNNL. PNNL is a multi-program national laboratory operated for the US DOE by Battelle.

Zhang, Renqin↗

Bulk crystal growth and electronic characterization of the 3D Dirac semimetal Na{sub 3}Bi

High quality hexagon plate-like Na{sub 3}Bi crystals with large (001) plane surfaces were grown from a molten Na flux. The freshly cleaved crystals were analyzed by low temperature scanning tunneling microscopy and angle-resolved photoemission spectroscopy, allowing for the characterization of the three-dimensional (3D) Dirac semimetal (TDS) behavior and the observation of the topological surface states. Landau levels were observed, and the energy-momentum relations exhibited a linear dispersion relationship, characteristic of the 3D TDS nature of Na{sub 3}Bi. In transport measurements on Na{sub 3}Bi crystals, the linear magnetoresistance and Shubnikov-de Haas quantum oscillations are observed for the first time.

36 MATERIALS SCIENCE↗

Three-dimensional character of the Fermi surface in ultrathin LaTiO 3 /SrTiO 3 heterostructures

LaTiO 3 films on SrTiO 3 single crystal substrates exhibit metallic behavior attributed to the LaTiO 3 film, the interface as well as part of the SrTiO 3 . In the limit of ultrathin LaTiO 3 films on SrTiO 3 , the contribution to the metallicity from strain-induced electronic structure modification of the LaTiO 3 film is minimized so that the dominant contribution to metallicity is from the interface and part of the SrTiO 3 due to charge transfer of 3d electrons from LaTiO 3 to SrTiO 3 . In such a limit, we observe quantum oscillations whose angular dependence indicates a three-dimensional Fermi surface. Finally, such angular dependence is observed in two sets of quantum oscillations—one low frequency and one high frequency—that we have attributed to an inner and outer Fermi surface associated with a Rashba-like spin split hybridized d xz+yz band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Maximum energy product at elevated temperatures for hexagonal strontium ferrite (SrFe12O19) magnet

The electronic structure of hexagonal strontium ferrite (SrFe12O19) was calculated based on the density functional theory (DFT) and generalized gradient approximation (GGA). The GGA+U method was used to improve the description of localized Fe 3d electrons. Three different effective U (U-eff) values of 3.7, 7.0, and 10.3 eV were used to calculate three sets of exchange integrals for 21 excited states. We then calculated the temperature dependence of magnetic moments m(T) for the five sublattices (2a, 2b, 12k, 4f(1), and 4f(2)) using the exchange integrals. The m(T) of the five sublattices are inter related to the nearest neighbors, where the spins are mostly anti-ferromagnetically coupled. The five sublattice m(T) were used to ()brain the saturation magnetization M-s(T) of SrFe12O19, which is in good agreement with the experimental values. The temperature dependence of maximum energy product. ((BII)(max)(T)) was calculated using the calculated M-s(T). (C) 2013 Elsevier B.V. All rights reserved.

Park, J↗

A hybrid-exchange density functional study of the bonding and electronic structure in bulk CuFeS{sub 2}

The geometric, electronic, and magnetic properties of bulk chalcopyrite CuFeS{sub 2} have been investigated using hybrid-exchange density functional theory calculations. The results are compared with available theoretical and experimental data. The theoretical description of the bonding and electronic structure in CuFeS{sub 2} is analyzed in detail and compared to those computed for chalcocite (CuS{sub 2}) and greigite (Fe{sub 3}S{sub 4}). In particular, the behavior of the 3d electrons of Fe{sup 3+} is discussed in terms of the Hubbard-Anderson model in the strongly correlated regime and found to be similarly described in both materials by an on-site Coulomb repulsion (U) of ∼8.9 eV and a transfer integral (t) of ∼0.3 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Intrinsic Electronic Structure of 3D Half-Heusler Thermoelectric Materials by Angle-Resolved Photoemission Spectroscopy

Accurate determination of the intrinsic electronic structure of thermoelectric materials is a prerequisite for utilizing an electronic band engineering strategy to improve their thermoelectric performance. Herein, with high-resolution angle-resolved photoemission spectroscopy (ARPES), the intrinsic electronic structure of the 3D half-Heusler thermoelectric material ZrNiSn is revealed. An unexpectedly large intrinsic bandgap is directly observed by ARPES and is further confirmed by electrical and optical measurements and firstprinciples calculations. Moreover, a large anisotropic conduction band with an anisotropic factor of 6 is identified by ARPES and attributed to be one of the most important reasons leading to the high thermoelectric performance of ZrNiSn. These successful findings rely on the grown high-quality single crystals, which have fewer Ni interstitial defects and negligible in-gap states on the electronic structure. This work demonstrates a realistic paradigm to investigate the electronic structure of 3D solid materials by using ARPES and provides new insights into the intrinsic electronic structure of the half-Heusler system benefiting further optimization of thermoelectric performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exotic Superconductivity in Correlated Electron Systems

Over the past decades, the search for high-T c superconductivity (SC) and its novel superconducting mechanisms is one of the most challenging tasks of condensed matter physicists and material scientists, wherein the most striking achievement is the discovery of high- c and unconventional superconductivity in strongly correlated 3d-electron systems, such as cuprates and iron pnictides/chalcogenides. Those exotic superconductors display the behaviors beyond the scope of the BCS theory (in the SC states) and the Landau-Fermi liquid theory (in the normal states). In general, such exotic superconductivity can be seen as correlated electron systems, where there are strong interplays among charge, spin, orbital, and lattice degrees of freedom. Thus, we focus on the exotic superconductivity in materials with correlated electrons in the present special issue.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure and Magnetic Properties of V-Monodoped and (V, Al)-Codoped 4H-SiC

Electronic structure and magnetic properties of vanadium (V)-doped 4H-SiC are researched by using the first-principle plane wave pseudopotential method based on density functional theory. Ten kinds of doping position are calculated and the most stable configuration is found. The results indicate that V-monodoped 4H-SiC favors a spin-polarized state and the magnetic moment mainly comes from the unpaired 3d electronic of V atoms. Several doping configurations studied suggest the existence of ferromagnetic coupling between V dopant. Ferromagnetic order is activated by V doping via a V{sub 0}:3d-C:2p-V{sub 7}:3d coupling chain. Hybridization occurs between p − d orbitals. The doped V atom will induce additional holes carrier into the 4H-SiC. Al itself has no contribution to the magnetic moment, whereas V- and Al-codoped 4H-SiC can induce spin polarization, which reveals that the FM stability is reduced significantly by Al codoping. The calculated electronic structure implies that the presence of Si vacancies (V{sub si}) weakens the FM state of V- and V{sub si}-codoped 4H-SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mott Electrons in an Artificial Graphenelike Crystal of Rare-Earth Nickelate S.

Deterministic control over the periodic geometrical arrangement of the constituent atoms is the backbone of the material properties, which, along with the interactions, define the electronic and magnetic ground state. Following this notion, a bilayer of a prototypical rare-earth nickelate, NdNiO3, combined with a dielectric spacer, LaAlO3, has been layered along the pseudocubic [111] direction. The resulting artificial graphenelike Mott crystal with magnetic 3d electrons has antiferromagnetic correlations. In addition, a combination of resonant X-ray linear dichroism measurements and ab initio calculations reveal the presence of an ordered orbital pattern, which is unattainable in either bulk nickelates or nickelate based heterostructures grown along the [001] direction. These findings highlight another promising venue towards designing new quantum many-body states by virtue of geometrical engineering.

Middey, Srimanta↗

Origin of the quasi-quantized Hall effect in ZrTe 5

The quantum Hall effect (QHE) is traditionally considered to be a purely two-dimensional (2D) phenomenon. Recently, however, a three-dimensional (3D) version of the QHE was reported in the Dirac semimetal ZrTe 5 . It was proposed to arise from a magnetic-field-driven Fermi surface instability, transforming the original 3D electron system into a stack of 2D sheets. Here, we report thermodynamic, spectroscopic, thermoelectric and charge transport measurements on such ZrTe 5 samples. The measured properties: magnetization, ultrasound propagation, scanning tunneling spectroscopy, and Raman spectroscopy, show no signatures of a Fermi surface instability, consistent with in-field single crystal X-ray diffraction. Instead, a direct comparison of the experimental data with linear response calculations based on an effective 3D Dirac Hamiltonian suggests that the quasi-quantization of the observed Hall response emerges from the interplay of the intrinsic properties of the ZrTe 5 electronic structure and its Dirac-type semi-metallic character.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin and orbital magnetic moments of Fe in the n-type ferromagnetic semiconductor (In,Fe)As

The electronic and magnetic properties of Fe atoms in the ferromagnetic semiconductor (In,Fe)As codoped with Be have been studied by x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) at the Fe L{sub 2,3} edge. The XAS and XMCD spectra showed simple spectral line shapes similar to Fe metal, but the ratio of the orbital and spin magnetic moments (M{sub orb}/M{sub spin}) estimated using the XMCD sum rules was significantly larger than that of Fe metal, indicating a significant orbital moment of Fe 3d electrons in (In,Fe)As:Be. The positive value of M{sub orb}/M{sub spin} implies that the Fe 3d shell is more than half-filled, which arises from the hybridization of the Fe{sup 3+} (d{sup 5}) state with the charge-transfer d{sup 6}L{sub ¯} states, where L{sub ¯} is a ligand hole in the host valence band. The XMCD intensity as a function of magnetic field indicated hysteretic behavior of the superparamagnetic-like component due to discrete ferromagnetic domains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Processing Satellite Data for Slant Total Electron Content Measurements

A method, system, and apparatus provide the ability to estimate ionospheric observables using space-borne observations. Space-borne global positioning system (GPS) data of ionospheric delay are obtained from a satellite. The space-borne GPS data are combined with ground-based GPS observations. The combination is utilized in a model to estimate a global three-dimensional (3D) electron density field.

Stephens, Philip John↗

Angle-resolved photoemission observation of Mn-pnictide hybridization and negligible band structure renormalization in BaMn 2 As 2 and BaMn 2 Sb 2

We performed an angle-resolved photoemission spectroscopy study of BaMn 2 As 2 and BaMn 2 Sb 2 , which are isostructural to the parent compound BaFe 2 As 2 of the 122 family of ferropnictide superconductors. We show the existence of a strongly k z -dependent band gap with a minimum at the Brillouin zone center, in agreement with their semiconducting properties. Despite the half filling of the electronic 3d shell, we show that the band structure in these materials is almost not renormalized from the Kohn-Sham bands of density functional theory. Finally, our photon-energy-dependent study provides evidence for Mn-pnictide hybridization, which may play a role in tuning the electronic correlations in these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rational Design of a Dual-Function Hybrid Cathode Substrate for Lithium-Sulfur Batteries

Here, a unique 3D hybrid sponge with chemically coupled nickel disulfide–reduced graphene oxide (NiS 2 –RGO) framework is rationally developed as an effective polysulfide reservoir through a biomolecule–assisted self–assembly synthesis. An optimized amount of NiS 2 (≈18 wt%) with porous nanoflower–like morphology is uniformly in situ grown on the RGO substrate, providing abundant active sites to adsorb and localize polysulfides. The improved polysulfide adsorptivity from sulfiphilic NiS 2 is confirmed by experimental data and first–principle calculations. Moreover, due to the chemical coupling between NiS 2 and RGO formed during the in situ synthesis, the conductive RGO substrate offers a 3D electron pathway to facilitate charge transfer toward the NiS 2 –polysulfide adsorption interface, triggering a fast redox kinetics of polysulfide conversion and excellent rate performance (C/20–4C). Therefore, the self–assembled hybrid structure simultaneously promotes static polysulfide–trapping capability and dynamic polysulfide–conversion reversibility. As a result, the 3D porous sponge enables a high sulfur content (75 wt%) and a remarkably high sulfur loading (up to 21 mg cm –2 ) and areal capacity (up to 16 mAh cm –2 ), exceeding most of the reported values in the literature involving either RGO or metal sulfides/other metal compounds (sulfur content of <60 wt% and sulfur loading of <3 mg cm –2 ).

25 ENERGY STORAGE↗

An intriguing intermediate state as a bridge between antiferroelectric and ferroelectric perovskites

The configuration of electric or magnetic dipoles embedded into a crystal lattice gives rise to the defining physical properties of a functional material. The prevailing antiferroelectric materials have so far been allusively assumed to be in a strict antiparallel electric polarization configuration, although they have shown huge potential applications for use in electronic devices. Herein, we have revealed for the first time the complex crystal structure of an intermediate state between the two conventional antiferroelectric (AFE) and ferroelectric (FE) states in PbZrO 3 -based perovskites by employing a combination of advanced synchrotron X-ray, neutron and three-dimensional (3D) electron diffraction techniques. We found that the intermediate state displays an intriguing flexible configuration of a sinusoidal wave functional with imbalanced polarization, different to the commonly believed antiparallel and balanced polarization. Such an intermediate state was concluded to act as a bridge between the conventional AFE and FE states. Our observations offer new insight into the AFE state and its transformation into the FE state. Such an intermediate state with a unique polarization configuration is believed to be a common feature that occurs in high-performance AFE perovskite materials.

36 MATERIALS SCIENCE↗