Search NASA⌕ Search

SEARCH · Search NASA

Results for “3d”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

3D scanning and 3D printing AlSi10Mg single crystal mounts for neutron scattering

Here, we present methods to quantify sample shapes and generate sample mounts as motivated by the needs of neutron scattering experiments. The 3D sample scanning was performed using photogrammetry and laser scanning, and a comparison is made between the two techniques. The aluminum alloy AlSi10Mg is shown to have favorable properties for many types of mounts used in neutron scattering. Parts were first prototyped with 3D plastic printers, and then, 3D AlSi10Mg prints were made. The final additively manufactured part holds the sample with more points of contact than is possible with traditional manufacturing. The goodness of fit between the mount and sample was measured by x-ray tomography.

47 OTHER INSTRUMENTATION↗

Modification of divertor heat and particle flux profiles with applied 3D fields in NSTX H-mode plasmas

We report externally imposed non-axisymmetric magnetic perturbations are observed to alter divertor heat and particle flux profiles in the National Spherical Torus Experiment (NSTX). The divertor profiles are found to have a modest level of multiple local peaks, characteristic of strike point splitting or the 'magnetic lobe' structure, even before the application of the 3D fields in some (but not all) NSTX discharges. This is thought to be due to the intrinsic error fields. The applied 3D fields augmented the intrinsic strike point splitting, making the amplitude of local peaks and valleys larger in the divertor profile and striations at the divertor surface brighter. The measured heat flux profile shows that the radial location and spacing of the striations are qualitatively consistent with a vacuum field tracing calculation. 3D field application did not change the peak divertor heat and particle fluxes at the toroidal location of measurement. Spatial characteristics of the observed patterns are also reported in the paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron-impact excitation of the (3d{sup 10}4s){sup 2}S{sub 1/2}{yields}(3d{sup 9}4s{sup 2}){sup 2}D{sub 5/2,3/2} transitions in copper atoms

Results from a joint experimental and theoretical investigation of electron impact excitation of the (3d{sup 10}4s){sup 2}S{sub 1/2}{yields}(3d{sup 9}4s{sup 2}){sup 2}D{sub 5/2,3/2} transitions in copper atoms are presented. The experimental results were obtained with the laser-induced fluorescence technique, while the numerical calculations were performed in a variety of nonrelativistic, semirelativistic, and fully relativistic R-matrix (close-coupling) calculations. Whereas there is qualitative agreement between the measured and predicted energy dependence of the angle-integrated cross section, significant uncertainties remain regarding the position and the height of the near-threshold maximum of the excitation function for the (3d{sup 9}4s{sup 2}){sup 2}D{sub 3/2} state. These uncertainties translate into difficulties regarding the absolute normalization of the relative experimental data to the theoretical predictions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron collisions with copper atoms: Elastic scattering and electron-impact excitation of the (3d{sup 10}4s){sup 2}S{yields}(3d{sup 10}4p){sup 2}P resonance transition

We report on a theoretical investigation of elastic electron scattering from the (3d{sup 10}4s){sup 2}S ground state and electron-impact excitation of the (3d{sup 10}4s){sup 2}S{yields}(3d{sup 10}4p){sup 2}P resonance transition in copper atoms. The calculations were performed using a semirelativistic and a fully relativistic B-spline R-matrix (close-coupling) approach. The results for the angle-integrated and angle-differential cross sections are generally in good agreement with those obtained in previous calculations and with numerous experimental data. Where discrepancies with experiment in the differential cross sections remain, the present work generally supports the previous calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evolution of texture and internal stresses within polycrystalline rock salt using in situ 3D synchrotron computed tomography and 3D X-ray diffraction

Over time rock salt caverns have been extensively used as reliable repositories for hazardous waste such as nuclear waste, oil or compressed gases. Undisturbed rock salt deposits in nature are usually impermeable and have very low porosity. However, rock salt formations under excavation stresses can develop crack networks, which increase their porosities; and in the case of a connected crack network within the media, rock salt may become permeable. Although the relationship between the permeability of rock salt and the applied stresses has been reported in the literature, a microscopic study that investigates the properties influencing this relationship, such as the evolution of texture and internal stresses, has yet to be conducted. This study employs in situ 3D synchrotron micro-computed tomography and 3D X-ray diffraction (3DXRD) on two small-scale polycrystalline rock salt specimens to investigate the evolution of the texture and internal stresses within the specimens. The 3DXRD technique measures the 3D crystal structure and lattice strains within rock salt grains. The specimens were prepared under 1D compression conditions and have shown an initial {111} preferred texture, a dominant {110}$\langle1\bar{1}0\rangle$ slip system and no fully connected crack network. The {111} preferred texture under the unconfined compression experiment became stronger, while the {111}$\langle1\bar{1}0\rangle$ slip system became more prominent. The specimens did not have a fully connected crack network until applied axial stresses reached about 30 MPa, at a point where the impermeability of the material becomes compromised due to the development of multiple major cracks.

36 MATERIALS SCIENCE↗

Limited-view 3D Imaging Technology or “LV 3D Imaging” Technology Assessment

Limited View 3D or “LV 3D” imaging is important because it addresses a technology gap that has life, time, radiation dose and monetary-saving impacts. It provides something that currently does not exist and its potential products open a variety of technology domains in which SRNL could become competitive in. It can become a low cost, safer and alternative approach to conducting what is commonly referred to as computer tomographic imaging. This project develops a bucket list of technologies that will be needed to develop a portable system for conducting LV 3D imaging.

47 OTHER INSTRUMENTATION↗

Limited-view 3D Imaging Technology or “LV 3D Imaging” Technology Assessment

Limited View 3D or “LV 3D” imaging is important because it addresses a tech nology gap that has life, time, radiation dose and monetary-saving impacts. It provides something that currently does not exist and its potential products open a variety of technology domains in which SRNL could become competitive in. It can become a low cost, safer and alternative approach to conducting what is commonly referred to as computer tomographic imaging. This project develops a bucket list of technologies that will be needed to develop a portable system for conducting LV 3D imaging.

47 OTHER INSTRUMENTATION↗

3D Cloud Aerosol Precipitation Experiment at kennaook Cape Grim (3D-CAPE-k) Field Campaign Report

The objective of this campaign was to complement the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Cloud And Precipitation Experiment at kennaook (CAPE-k) in northwest Tasmania by deploying scanning, fixed pointing angle, and in situ aerosol, cloud, and precipitation remote-sensing instruments during the last six months of the experiment. These instruments provided a three-dimensional (3D) context to the second ARM Mobile Facility (AMF2) vertically pointing observations collected at the kennaook Cape Grim (KCG) site and captured a portion of the life cycle of the clouds before and after the passage over the AMF2 vertical column. These 3D cloud measurements will be used in the near future to 1) investigate how the vertical profiles of aerosol and cloud properties are representative of the broader area and how these properties evolve during the portion of the cloud life cycle captured by the scanning instruments, 2) quantify how accurate the cloud fraction derived with assumptions from vertically pointing observations are compared with direct 3D cloud fraction measurements, 3) evaluate cloud fraction and liquid water path in the Australian Community Climate and Earth-System Simulator–Convective-scale (ACCESS-C) forecast model, and 4) evaluate aerosol and cloud products from the European Space Agency/Japanese Aerospace Exploration Agency (ESA/JAXA) Earth Cloud Aerosol Radiation Explorer (EarthCARE) mission using the scanning measurements, offering more chances of exact collocation, thereby complementing the statistical approach we are planning to employ with AMF2 observations for that same purpose.

54 ENVIRONMENTAL SCIENCES↗

3D Continuous Forcing Dataset from 3D Constrained Variational Analysis at SGP

The continuous 3D large-scale forcing (VARANAL3D) data set derived from 3D constrained variational analysis (3DCVA) extends the conventional constrained variational analysis method by incorporating multiple sub-columns within the analysis domain. This advancement introduces spatial variability into the large-scale forcing fields, thereby enriching the data set’s applicability. The VARANAL3D data set spans from 2004 to 2018 and covers a region of 5˚×4.5˚ domain around the ARM SGP site. The analysis domain is divided into 10×9 sub-columns with 0.5˚ resolution. The 3D large-scale forcing data provides necessary variables to drive and evaluate single-column models (SCM), cloud-resolving models (CRM) ,and large-eddy simulations (LES), as well as information for testing model sensitivity to spatial variability of the large-scale forcing data, facilitating more rigorous testing and refinement of physical processes in SCM/CRM/LES.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Dendritic Spatially Extended 3D Patterns in Directional Solidification: Microgravity Experiments in DECLIC-DSI onboard ISS and 3D Phase-field Simulations

To clarify and characterize the fundamental physical mechanisms active in the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of series of experiments on transparent model alloy succinonitrile – 0.46 wt% camphor was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer the very unique opportunity to observe in situ and characterize the dynamics of the microstructure formation and evolution in extended 3D patterns under microgravity environment. The analyses of the dendritic patterns for a broad range of growth velocities displaying different levels of sidebranching will be presented. Especially, the time evolution of primary spacing, in case of solidifications at constant pulling rate as well as for experiments with pulling rate jump, will be compared to 3D phase-field simulations, and the results will be discussed in terms of stable spacing range.

Kaihua Ji↗

Characterization of Dendritic Spatially Extended 3D Patterns in Directional Solidification: Microgravity Experiments in DECLIC-DSI Onboard ISS and 3D Phase-field Simulations

To clarify and characterize the fundamental physical mechanisms active in the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of series of experiments on transparent model alloy succinonitrile – 0.46 wt% camphor was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer the very unique opportunity to observe in situ and characterize the dynamics of the microstructure formation and evolution in extended 3D patterns under microgravity environment. The analyses of the dendritic patterns for a broad range of growth velocities displaying different levels of sidebranching will be presented. Especially, the time evolution of primary spacing, in case of solidifications at constant pulling rate as well as for experiments with pulling rate jump, will be compared to 3D phase-field simulations, and the results will be discussed in terms of stable spacing range.

Kaihua Ji↗

Scaffold-free 3D porous electrode and method of making a scaffold-free 3D porous electrode

A scaffold-free 3D porous electrode comprises a network of interconnected pores, where each pore is surrounded by a multilayer film including a first layer of electrochemically active material, one or more monolayers of graphene on the first layer of electrochemically active material, and a second layer of electrochemically active material on the one or more monolayers of graphene. A method of making a scaffold-free 3D porous electrode includes depositing one or more monolayers of graphene onto a porous scaffold to form a graphene coating on the porous scaffold, and depositing a first layer of an electrochemically active material onto the graphene coating. The porous scaffold is removed to expose an underside of the graphene coating, and a second layer of the electrochemically active material is deposited onto the underside of the graphene coating, thereby forming the scaffold-free 3D porous electrode.

36 MATERIALS SCIENCE↗

3d-3d correspondence revisited

In fivebrane compactifications on 3-manifolds, we point out the importance of all flat connections in the proper definition of the effective 3d N = 2 theory. The Lagrangians of some theories with the desired properties can be constructed with the help of homological knot invariants that categorify colored Jones polynomials. Higgsing the full 3d theories constructed this way recovers theories found previously by Dimofte-Gaiotto-Gukov. As a result, we also consider the cutting and gluing of 3-manifolds along smooth boundaries and the role played by all flat connections in this operation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

blocks_3d: software for general 3d conformal blocks

We introduce the software blocks_3d for computing four-point conformal blocks of operators with arbitrary Lorentz representations in 3d CFTs. It uses Zamolodchikov-like recursion relations to numerically compute derivatives of blocks around a crossing-symmetric configuration. It is implemented as a heavily optimized, multi-threaded, C++ application. We give performance benchmarks for correlators containing scalars, fermions, and stress tensors. As an example application, we recompute bootstrap bounds on four-point functions of fermions and study whether a previously observed sharp jump can be explained using the “fake primary” effect. We conclude that the fake primary effect cannot fully explain the jump and the possible existence of a “dead-end” CFT near the jump merits further study.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗