Search NASA⌕ Search

SEARCH · Search NASA

Results for “5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Liquid–Liquid Microfluidic Flows for Ultrafast 5-Hydroxymethyl Furfural Extraction

We study the effects of liquid–liquid flow patterns on the extraction of 5-hydroxymethyl furfural from the aqueous phase into an organic phase (methyl isobutyl ketone, ethyl acetate, and 2-pentanol) at ultrashort residence times of 0.2–20 s in a coiled capillary microchannel. Slug, droplet, slug-droplet, dispersed, parallel, annular, and irregular two-phase flow patterns are generated. We evaluate the extraction efficiency and the volumetric mass transfer coefficient via experiments and computational fluid dynamics (CFD). The CFD predictions are in quantitative agreement with the experimental data. The convective and diffusive contributions to the mass transfer of different flow patterns are analyzed. For all solvent pairs, the extraction efficiency varies irregularly with increasing flow rate due to changes in the mass transfer mechanism caused by a transition between flow regimes. Overall, we demonstrate >90% extraction efficiencies with high volumetric mass transfer coefficients ranging from 0.006 to 2.17 s–1. Furthermore, a merit index is defined to assess the trade-off between the fast mass transfer and the pressure drop in biphasic microchannels. In general, the mass transfer rate increases significantly at high flow rates at the expense of a high-pressure drop. Furthermore, the ethyl acetate/water irregular flow pattern is optimal due to a large throughput, extraction efficiency, and mass transfer coefficient, with a minimal pressure drop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Pressure Equation of State of 1,3,5-triamino-2,4,6-trinitrobenzene: Insights into the Monoclinic Phase Transition, Hydrogen Bonding, and Anharmonicity

The high-pressure equation of state (EOS) of energetic materials (EMs) is important for continuum and mesoscale models of detonation performance and initiation safety. Additionally, obtaining a high-fidelity EOS of the insensitive EM 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has proven to be difficult because of challenges in experimental characterization at high pressures (HPs). In this work, powder X-ray diffraction patterns were fitted using the recently discovered monoclinic I2/a phase above 4 GPa, which shows that TATB is less compressible than when indexed with the triclinic $P\bar{1}$ phase. First-principles calculations were performed with Perdew–Burke–Ernzerhof (PBE) and PBE0 functionals including thermal effects using the $P\bar{1}$ phase. PBE0 improves the description of hydrogen bonding and thus predicts accurate planar a and b lattice parameters under ambient conditions. However, discrepancies in the predicted lattice parameters above 4–10 GPa compared with experimental measurements indexed with $P\bar{1}$ are further evidence of a structural modification at high pressure. Layer sliding defects are formed during molecular dynamics simulations, which induces an anharmonic effect on the thermal expansion of the c lattice parameter. In short, the results provide several insights into determining high-fidelity EOS parameters for TATB and other molecular crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling of streamflow in a 30 km long reach spanning 5 years using OpenFOAM 5.x

Abstract. Developing accurate and efficient modeling techniques for streamflow at the tens-of-kilometers spatial scale and multi-year temporal scale is critical for evaluating and predicting the impact of climate- and human-induced discharge variations on river hydrodynamics. However, achieving such a goal is challenging because of limited surveys of streambed hydraulic roughness, uncertain boundary condition specifications, and high computational costs. We demonstrate that accurate and efficient three-dimensional (3-D) hydrodynamic modeling of natural rivers at 30 km and 5-year scales is feasible using the following three techniques within OpenFOAM, an open-source computational fluid dynamics platform: (1) generating a distributed hydraulic roughness field for the streambed by integrating water-stage observation data, a rough wall theory, and a local roughness optimization and adjustment strategy; (2) prescribing the boundary condition for the inflow and outflow by integrating precomputed results of a one-dimensional (1-D) hydraulic model with the 3-D model; and (3) reducing computational time using multiple parallel runs constrained by 1-D inflow and outflow boundary conditions. Streamflow modeling for a 30 km long reach in the Columbia River (CR) over 58 months can be achieved in less than 6 d using 1.1 million CPU hours. The mean error between the modeled and the observed water stages for our simulated CR reach ranges from −16 to 9 cm (equivalent to approximately ±7 % relative to the average water depth) at seven locations during most of the years between 2011 and 2019. We can reproduce the velocity distribution measured by the acoustic Doppler current profiler (ADCP). The correlation coefficients of the depth-averaged velocity between the model and ADCP measurements are in the range between 0.71 and 0.83 at 75 % of the survey cross sections. With the validated model, we further show that the relative importance of dynamic pressure versus hydrostatic pressure varies with discharge variations and topography heterogeneity. Given the model's high accuracy and computational efficiency, the model framework provides a generic approach to evaluate and predict the impacts of climate- and human-induced discharge variations on river hydrodynamics at tens-of-kilometers and decadal scales.

58 GEOSCIENCES↗
DOE OSTI2023

Version of GCAM-USA used for National Climate Assessment 5, Chapter 5: GCAM-USA-v5.3-IM3-NCA5

Overview GCAM-USA-v5.3-IM3-NCA5 is developed using GCAM-USA-v5.3 as its core, with the impact of the thermodynamic global warming scenario "RCP8.5_hotter" on runoff, heating and cooling degree-hours, and agricultural yield and the SSP5 socioeconomic scenario. These scenarios were produced as part of the Integrated Multisector, Multiscale Modeling (IM3) project and used by National Climate Assessment 5. Detailed Information This software package includes the output dataset, which is located in "output/database_rcp85hotter_ssp5". For reproducibility, the model is setup and ready to run for the selected IM3 scenario "rcp85hotter_ssp5". To execute the model, double click "exe/run-gcam.bat".

Climate Change↗
DOE OSTI2024

Flavor in SU(5)$SU(5)$ Finite Grand Unified Models

Abstract Four supersymmetric models which exhibit and/or symmetries are studied, that are finite to two or all loops, and their corresponding mass matrices. The first is an all‐loop finite model based on an flavor symmetry, which leads to phenomenologically nonviable mass matrices. The remaining models, based on cyclic symmetries, show various mass textures, some of which are phenomenologically promising. For the two‐loop finite models, the parametric solutions to the finiteness conditions determine completely some of the Yukawa couplings, and lead to a restricted range of values for other ones at the GUT scale, with a considerable reduction in the number of free parameters. One particular solution of the two‐loop models shows an enhanced symmetry, leading to an all‐loop finite model, which has a significant parameter reduction and could in principle reproduce the observed quark masses and mixing pattern. In this case the finiteness conditions determine the absolute value of all the Yukawa couplings at the unification scale. Finally, the minimum number of phases in the mass matrices and their position are determined, a task not previously done in Finite Unified Theories, which contributes towards the reduction of parameters and a better understanding of the Yukawa couplings.

Estrada Ramos, Luis Odín↗
DOE OSTI2020

The Role of Co-ZSM-5 Catalysts in Aerobic Oxidation of Ethylbenzene

Various forms of cobalt catalysts have been studied extensively for selective aerobic oxidation of hydrocarbons. However, it remains unclear whether cobalt can directly activate molecular oxygen under mild reaction conditions. Here we investigated the catalytic roles of cobalt in ethylbenzene oxidation with and without a hydroperoxide initiator. The contribution of different cobalt species was studied by varying the metal loading on Co-impregnated ZSM-5 samples. Quantitative EPR was used to determine the impact of cobalt catalysts on the free radical concentrations. Furthermore, this work provided strong evidence that cobalt, in several different forms, catalyzes hydrocarbon oxidation by facilitating peroxy bond cleavage, instead of direct oxygen activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗