Search NASA⌕ Search

SEARCH · Search NASA

Results for “AE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Artificial intelligence for materials research at extremes

Abstract Materials development is slow and expensive, taking decades from inception to fielding. For materials research at extremes, the situation is even more demanding, as the desired property combinations such as strength and oxidation resistance can have complex interactions. Here, we explore the role of AI and autonomous experimentation (AE) in the process of understanding and developing materials for extreme and coupled environments. AI is important in understanding materials under extremes due to the highly demanding and unique cases these environments represent. Materials are pushed to their limits in ways that, for example, equilibrium phase diagrams cannot describe. Often, multiple physical phenomena compete to determine the material response. Further, validation is often difficult or impossible. AI can help bridge these gaps, providing heuristic but valuable links between materials properties and performance under extreme conditions. We explore the potential advantages of AE along with decision strategies. In particular, we consider the problem of deciding between low-fidelity, inexpensive experiments and high-fidelity, expensive experiments. The cost of experiments is described in terms of the speed and throughput of automated experiments, contrasted with the human resources needed to execute manual experiments. We also consider the cost and benefits of modeling and simulation to further materials understanding, along with characterization of materials under extreme environments in the AE loop. Graphical abstract AI sequential decision-making methods for materials research: Active learning, which focuses on exploration by sampling uncertain regions, Bayesian and bandit optimization as well as reinforcement learning (RL), which trades off exploration of uncertain regions with exploitation of optimum function value. Bayesian and bandit optimization focus on finding the optimal value of the function at each step or cumulatively over the entire steps, respectively, whereas RL considers cumulative value of the labeling function, where the latter can change depending on the state of the system (blue, orange, or green).

36 MATERIALS SCIENCE↗
DOE OSTI2021

A priori examination of reduced chemistry models derived from canonical stirred reactors using three-dimensional direct numerical simulation datasets

Data-driven approaches to construct reduced chemical kinetic models, that rely heavily on thermo-chemical datasets with full chemical kinetics, have been gaining popularity. Datasets from direct numerical simulations (DNS) under three-dimensional (3-D) realistic turbulent flow conditions are desirable but limited to carefully designed parametric conditions due to the computational cost. Constructing datasets from a large ensemble of zero-dimensional stirred reactors like perfectly stirred reactor (PSR) and partially stirred reactor (PaSR) is a computationally efficient solution to consider the turbulence-chemistry interactions and cover a broad range of parametric conditions. In this paper, we derive reduced chemistry models from solutions of a large number of PSR and PaSR reactors using autoencoder (AE) neural networks and principal component analysis (PCA), and conduct a priori examination of the reduced models in three temporally evolving 3-D DNS jet flames featuring local extinction and re-ignition. The results show that the reduced models derived from PaSR datasets, i.e., AE-PaSR and PCA-PaSR, generally show significant improvement over the ones derived from PSR datasets. Among all the reduced models, AE-PaSR shows the best agreement with DNS results on the reconstruction accuracy and the representation of temporally evolving local extinction and re-ignition events.

Zhang, Pei↗
DOE OSTI2022

Satellite-based evaluation of AeroCom model bias in biomass burning regions

Global models are widely used to simulate biomass burning aerosol (BBA). Exhaustive evaluations on model representation of aerosol distributions and properties are fundamental to assess health and climate impacts of BBA. Here we conducted a comprehensive comparison of Aerosol Comparisons between Observations and Models (AeroCom) project model simulations with satellite observations. A total of 59 runs by 18 models from three AeroCom Phase-III experiments (i.e., biomass burning emissions, CTRL16, and CTRL19) and 14 satellite products of aerosols were used in the study. Aerosol optical depth (AOD) at 550 nm was investigated during the fire season over three key fire regions reflecting different fire dynamics (i.e., deforestation-dominated Amazon, Southern Hemisphere Africa where savannas are the key source of emissions, and boreal forest burning in boreal North America). The 14 satellite products were first evaluated against AErosol RObotic NETwork (AERONET) observations, with large uncertainties found. But these uncertainties had small impacts on the model evaluation that was dominated by modeling bias. Through a comparison with Polarization and Directionality of the Earth’s Reflectances measurements with the Generalized Retrieval of Aerosol and Surface Properties algorithm (POLDER-GRASP), we found that the modeled AOD values were biased by –93 % to 152 %, with most models showing significant underestimations even for the state-of-the-art aerosol modeling techniques (i.e., CTRL19). By scaling up BBA emissions, the negative biases in modeled AOD were significantly mitigated, although it yielded only negligible improvements in the correlation between models and observations, and the spatial and temporal variations in AOD biases did not change much. For models in CTRL16 and CTRL19, the large diversity in modeled AOD was in almost equal measures caused by diversity in emissions, lifetime, and the mass extinction coefficient (MEC). We found that in the AeroCom ensemble, BBA lifetime correlated significantly with particle deposition (as expected) and in turn correlated strongly with precipitation. Additional analysis based on Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) aerosol profiles suggested that the altitude of the aerosol layer in the current models was generally too low, which also contributed to the bias in modeled lifetime. Modeled MECs exhibited significant correlations with the Ångström exponent (AE, an indicator of particle size). Comparisons with the POLDER-GRASP-observed AE suggested that the models tended to overestimate the AE (underestimated particle size), indicating a possible underestimation of MECs in models. The hygroscopic growth in most models generally agreed with observations and might not explain the overall underestimation of modeled AOD. Our results imply that current global models contain biases in important aerosol processes for BBA (e.g., emissions, removal, and optical properties) that remain to be addressed in future research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Architecture Design and Validation for Autonomous Energy Systems

The architecture presentation discusses the requirement grid architecture design to integrate AES capabilities. Three NREL projects that cover control, communication, and operation architectures are discussed as reference AES implementations. Testing platforms and capabilities such as ADMS test bed are introduced to validate AES solutions and developed architectures.

architecture design↗
DOE OSTI2022

Analysis of the ECH effect on EPM/AE stability in Heliotron J plasma using a Landau closure model

The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfvén eigenmodes (AEs) and energetic particle modes (EPMs) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The simulations reproduce the AE/EPM stability trends observed in the experiments as the electron temperature (T e ) increases, modifying the thermal plasma β, EP β and EP slowing-down time. Particularly, the $n/m = 1/2$ EPM and $2/4$ Global AE are stabilized in the low-bumpiness (LB) configuration due to an enhancement of the continuum, finite Larmor radius and e-i Landau damping effects as the thermal β increases. On the other hand, a larger ECH injection power cannot stabilize the AE/EPM in medium-bumpiness and high-bumpiness (HB) configurations because the damping effects are weaker compared to the LB case, unable to balance the further destabilization induced by an enhanced EP resonance as the EP slowing-down time and EP β increases with T e .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Directional Bonding in Decaniobate Inorganic Frameworks

Abstract Metal–oxo clusters offer an opportunity to assemble inorganic and metal–organic frameworks (MOFs) by a controlled building‐block approach, which led to the revolutionary discoveries of zeolites and MOFs. Polyoxometalate clusters are soluble in water, but more challenging to link into frameworks; the inert oxo‐caps that provide solubility are resistant to replacement or further connectivity. We demonstrate how the unique directional bonding and varying basicity of the decaniobate ([Nb 10 ]) oxo‐caps can be exploited to build 1D, 2D, and 3D inorganic frameworks. In nine structures, A + (A=Li, Na, K, Rb and Cs), AE 2+ (AE=Ca, Sr, Ba) and Mn 2+ demonstrate that the dimensionality of the obtained material is controlled by cation charge and size. Increased cation charge decreases selectivity for oxo‐site bonding, leading to higher dimensional linking. Larger cation radii also decreases bonding selectivity, yielding higher dimensional materials. Ion‐exchange studies of the A + ‐Nb 10 family shows exclusive selectivity for Cs + over other alkalis, which is important for radioactive Cs removal and sequestration.

Martin, Nicolas P.↗
DOE OSTI2022

A phase 2 study of sorafenib combined with conventional therapies in refractory central nervous system leukemia

Background Patients with refractory central nervous system leukemia (CNSL) have a dismal prognosis and lack effective therapy. Case reports have shown that sorafenib is effective against brain metastases, including leukemia. Methods To explore the efficacy of sorafenib combined with conventional therapies for refractory CNSL, a phase 2 study was conducted. The primary end point was the complete remission rate (CRR) within 8 weeks of treatment. Secondary end points included the overall response rate (ORR), event‐free survival (EFS), overall survival (OS), and adverse events (AEs). Results Twenty‐six patients with refractory CNSL were enrolled; they included 17 with isolated CNSL, 7 with hematological relapse, and 2 with another extramedullary relapse. After 8 weeks of treatment, 21 patients achieved complete remission, 2 achieved partial remission, and 3 achieved no remission for a CRR of 80.8% (95% CI, 62.1%‐91.5%) and an ORR of 88.5% (95% CI, 71.0%‐96.0%). Twenty patients survived, and 6 died. The 2‐year EFS and OS rates were 75.0% (95% CI, 54.5%‐88.3%) and 76.9% (95% CI, 54.2%‐90.4%), respectively. Six patients experienced grade 3 or 4 treatment‐related AEs, including moderate chronic graft‐vs‐host disease (n = 3), grade 3 or 4 acute graft‐vs‐host disease (n = 2), and grade 3 skin rash (n = 1). No treatment‐related deaths occurred during the therapy of refractory CNSL. Conclusions Sorafenib combined with conventional therapies is effective and safe for refractory CNSL. Lay Summary Sorafenib combined with conventional therapies is effective and safe for refractory central nervous system leukemia.

Chen, Xiaoxia↗
DOE OSTI2022

Finding Hidden Patterns in High Resolution Wind Flow Model Simulations

Wind flow data is critical in terms of investment decisions and policy making. High resolution data from wind flow model simulations serve as a supplement to the limited resource of original wind flow data collection. Given the large size of data, finding hidden patterns in wind flow model simulations are critical for reducing the dimensionality of the analysis. In this work, we first perform dimension reduction with two autoencoder models: the CNN-based autoencoder (CNN-AE) [1], and hierarchical autoencoder (HIER-AE) [2], and compare their performance with the Principal Component Analysis (PCA). We then investigate the super-resolution of the wind flow data. By training a Generative Adversarial Network (GAN) with 300 epochs, we obtained a trained model with 2× resolution enhancement. We compare the results of GAN with Convolutional Neural Network (CNN), and GAN results show finer structure as expected in the data field images. Also, the kinetic energy spectra comparisons show that GAN outperforms CNN in terms of reproducing the physical properties for high wavenumbers and is critical for analysis where high-wavenumber kinetics play an important role.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Search for solar axions produced through the axion-electron coupling gae using a new GridPix detector at CAST

We present a search for solar axions produced through the axion-electron coupling (g ae ) using data from a novel 7-GridPix detector installed at the CERN Axion Solar Telescope (CAST). The detector, featuring ultra-thin silicon nitride windows and multiple veto systems, collected approximately 160 hours of solar tracking data between 2017–2018. Using machine learning techniques and the veto systems, we achieved a background rate of 1.06 × 10 −5 keV −1 cm −2 s −1 at a signal efficiency of about 80% in the 0.2 to 8 keV range. Analysis of the data yielded no significant excess above background, allowing us to set a new upper limit on the product of the axion-electron and axion-photon couplings of g ae · g aγ < 7.35 × 10 −23 GeV −1 at 95% confidence level for axion masses below 10 meV. This result improves upon the previous best helioscope limit and demonstrates the potential of GridPix technology for rare event searches. Additionally, we derived a limit on the axion-photon coupling of g aγ < 9.0 × 10 −11 GeV −1 at 95% CL, which, while not surpassing CAST’s best limit, provides complementary constraints on axion models.

Beyond Standard Model↗
DOE OSTI2024

Stress Dependency of Brittle Creep in Granite: Insights into Source Mechanisms and Parameters

Creep in rocks refers to the gradual deformation of rock material over time under the influence of constant stress. Characterizing these deformations is of great importance for engineering design, geotechnical assessment, mining operations, geological studies, and understanding natural hazards. While laboratory experiments and a variety of numerical approaches have offered explanations for microcrack interaction and damage accumulation under the three stages of creep (primary, secondary and tertiary) in conventional creep experiments, the micromechanisms of the fractures produced in brittle creep and its dependency on the applied stress have not been explored in detail. The present study focused on investigating the fracturing mechanisms that occur during creep-induced fracturing at different stress levels and estimation of the source parameters and energy budget components. A series of uniaxial compression creep experiments have been conducted at different stress level ratios (70%, 75%, 80% and 85%), to the unconfined compressive strength (UCS) of double-flawed Barre granite specimen. Creep measurements were complemented with the Acoustic Emission (AE) measurements. The creep-induced fractures were classified into double-couple (DC), compensated linear vector dipole (CLVD) and isotropic (ISO) components using the AE moment tensor decomposition technique. The results show that non-double-couple sources dominated during creep at all the specified stress levels; however, their proportions decreased as the stress level was increased. The source parameters estimation indicated a significant increase in the magnitude of the events and the radiated seismic energy with increasing levels of stress and a slight increase in the evaluated source radius and stress drop with increasing stress levels. Furthermore, this study contributes to the existing knowledge of creep-induced fracturing by providing insights into the fracturing mechanisms and the radiated seismic energy produced, which can be helpful for the development of improved models and strategies for rock engineering and geoscience applications.

58 GEOSCIENCES↗
DOE OSTI2021

Analysis and prediction of intersection traffic violations using automated enforcement system data

We report that the automated enforcement system (AES) is an effective way of supplementing traditional traffic enforcement, and the traffic violation data from AES can also be effectively used for safety research. In this study, traffic violation data were used to analyze the influencing factors associated with traffic violations and to predict the probability of violations at intersections. The potential factors influencing violations include 24 independent factors related to time, space, traffic and weather. Results from a logistic model showed that the midday period, weekends, residential districts, collector roads, congested traffic conditions, high traffic flow, lower wind speed and low temperature would increase the probability of traffic violations. The probability of violations was predicted by the random forest algorithm, which was proven to be the best traffic violation prediction model among logistic regression, Gaussian naive Bayes, and support vector machine. Moreover, the proximity weighted synthetic oversampling technique (ProWSyn) method was applied to reduce the impact of the imbalance ratio (IR) and improve the model’s prediction performance. The receiver operating characteristics (ROC) curves and Precision-Recall (PR) curves illustrated that the random forest algorithm using oversampling data had the best classifier prediction performance than undersampling data. The area under curve (AUC) and out-of-bag (OOB) error with IR = 1 reached 0.914 and 0.0787, which showed the better performance of the random forest algorithm using ProWSyn in dealing with imbalanced traffic violation data.

42 ENGINEERING↗
DOE OSTI2024

Experimental investigation of probabilistic failure of SiC/SiC composite tubes under multiaxial loading

This paper presents an experimental investigation of the failure behavior of SiC fiber-reinforced SiC matrix (SiC/SiC) composite tubes under multiaxial loading. A new testing apparatus is designed to independently apply axial stress and internal pressure to SiC/SiC tubes. Acoustic emission (AE) is used to monitor the damage growth in the specimen. Based on the measured stress–strain response, a strain-based criterion is proposed to determine the proportional limit stress (PLS). The proposed strain-based criterion is compared with the PLS determined by the AE measurement. The PLS is determined for different loading ratios to form a multiaxial failure surface. By testing multiple replicates, the statistical variations of the PLS are determined. In conclusion, based on the experimental results, a mathematical model is developed to characterize the probability distribution of the PLS of SiC/SiC composites under multiaxial loading.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analyzing acoustic emission data to identify cracking modes in cement paste using an artificial neural network

This research is focused on the identification of cracking mechanisms for cement paste using acoustic emission data, recorded from compression and notched four-point bending tests. A procedure is developed for analyzing the data by employing an agglomerative hierarchical clustering method, an artificial neural network, and a ray-tracing source location algorithm. An agglomerative hierarchical clustering method is utilized to cluster the AE data from a compression test using frequency-dependent features. A neural network is trained using the compression test data and applied to the AE data emitted during the four-point bending test. The clustered data from the four-point bending test is localized using a ray-tracing algorithm. Based on the occurrence and locations of the clustered events and signal feature analyses, potential cracking mechanisms are identified and assigned.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evidence of an oxidation induced phase transformation for a delta phase plutonium-gallium alloy

The oxidation of an ~1.5 at% Ga plutonium metal alloy in dry air as a function of time was studied using a combination of FIB-SEM, AES, and XRD. Analysis of SEM images of FIB cross-sections of the oxide allowed for direct measurement of the oxide thickness as well as determination of heterogeneity in the extent of the oxide. AES analysis performed on cross-sections of the oxide allowed for quantitative analysis of the atomic composition and semi-quantitative analysis of the chemical composition. Initial preparation of the sample was found to induce a martensitic transformation to α' - Pu with an average thickness of 233 nm. Electropolishing was found to be sufficient to fully remove the α' layer with creation of only a minimum oxide layer. Growth of the oxide in dry air was found to initially follow parabolic kinetics, with a parabolic rate constant orders of magnitude higher than expected for δ-Pu but in-line with values extrapolated to room temperature for α-Pu. Following complete oxidation of the initial α` layer, further regions of plutonium metal depleted in gallium were observed to form at the oxide / metal interface. However, gallium, as Ga 2 O 3 , was found to be enriched at the surface and present in the oxide in an amount comparable to the relative Ga:Pu ratio of the bulk metal alloy. Finally, the results presented here serve to bridge a diverse array of previous experimental and theoretical data and provide the first comprehensive view of the fate of the δ-stabilizer during formation of an oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advancing spatiotemporal forecasts of CO 2 plume migration using deep learning networks with transfer learning and interpretation analysis

Accurate and timely forecasts of CO 2 plume distribution throughout the injection and post-injection phases are crucial for detecting plume migration, assessing leakage risks, and supporting operational decisions in geologic carbon storage (GCS). Current convolutional neural network-based approaches primarily focus on spatial information and overlook temporal dependencies in plume distributions, thus limiting their ability to capture dynamic movement effects and provide accurate predictions of plume migration. In this work, we propose two deep learning models, Auto-Encoder (AE)-LSTM and Encoder-Decoder (ED)-ConvLSTM, each uniquely designed to capture both spatial and temporal features. We apply the proposed methods to forecast the dynamic distribution of CO 2 plumes based on 108 reservoir simulations over a 30-year injection and a 30-year post-injection period. The results indicate that the ED-ConvLSTM model outperforms the AE-LSTM model in accurately predicting the spatiotemporal dynamics of CO 2 plume migration, achieving R 2 values above 0.99. To provide a deeper understanding of these model predictions, we employ a gradient-based explanation method on the trained models. This approach provides insights into the influence of input variables on plume migration forecasts and uncovers the underlying prediction mechanisms of the proposed models. Furthermore, we introduce a transfer learning technique, enabling fast and accurate plume migration forecasting in the post-injection phase by leveraging the trained model during the injection phase. This reduces the necessity for extensive data collection or re-training. In conclusion, the methods proposed in our work enhances the performance and interpretability of CO 2 plume migration forecasts, thereby facilitating informed decision-making throughout the entire lifecycle of GCS applications.

58 GEOSCIENCES↗
DOE OSTI2021

Early Prediction of Acute Esophagitis for Adaptive Radiation Therapy

Acute esophagitis (AE) is a common dose-limiting toxicity in radiation therapy of locally advanced non-small cell lung cancer (LA-NSCLC). We developed an early AE prediction model from weekly accumulated esophagus dose and its associated local volumetric change.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

In-pixel AI for lossy data compression at source for X-ray detectors

Integrating neural networks for data compression directly in the Read-Out Integrated Circuits (ROICs), i.e. the pixelated front-end, would result in a significant reduction in off-chip data transfer, overcoming the I/O bottleneck. Our ROIC test chip (AI-In-Pixel-65) is designed in a 65 nm Low Power CMOS process for the readout of pixelated X-ray detectors. Each pixel consists of an analog front-end for signal processing and a 10b analog-to-digital converter operating at 100KSPS. Here, we compare two non-reconfigurable techniques, Principal Component Analysis (PCA) and an AutoEncoder (AE) as lossy data compression engines implemented within the pixelated area. The PCA algorithm achieves 50$×$ compression, adds one clock cycle latency, and results in a 21% increase in the pixel area. The AE achieves 70$×$ compression, adds 30 clock cycle latency, and results in a similar area increase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗