Search NASA⌕ Search

SEARCH · Search NASA

Results for “AEROSOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Predicting Liquid–Liquid Phase Separation of Submicrometer Proxies for Atmospheric Secondary Aerosol

Liquid–liquid phase separation (LLPS) of atmospheric aerosols can significantly impact climate, air quality, and human health. However, their complex composition, small size, and history-dependent properties result in great uncertainty in the modeling of aerosol phase state and atmospheric processes. Herein, using cryogenic transmission electron microscopy (cryo-TEM), we examined model submicron aerosols composed of organic compounds and ammonium sulfate, and established a parameterization for the separation relative humidity (SRH) that accounts for chemical composition, particle size, and equilibration time. We evaluated different variables that describe chemical composition: O/C ratio, partition coefficient, solubility, molar mass, and polarizability. The O/C ratio fits the SRH of micrometer droplets best, and by using a scaling factor to translate the micrometer SRH parameterization to submicron aerosols, we incorporate the effects of size and equilibration time. The measured scaling factor for the submicron mean SRH (30nm – 1μm, 20 min equilibration times) is 0.80, the factor becomes 1 with equilibration time over 1 hour, and is equal to 0, meaning that SRH is absent, when the aerosol dry diameter is smaller than 30 nm. Furthermore, our parameterization will aid in universal SRH modeling, potentially leading to more accurate predictions of aerosol mass, optical properties, hygroscopicity, and heterogeneous chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Increased Asian Sulfate Aerosol Emissions Remarkably Enhance Sahel Summer Precipitation

Observational evidence shows that Sahel summer precipitation has experienced a considerable increase since the 1980s, coinciding with significant diverging trends of increased sulfate emissions in Asia and decreased emissions in Europe (dipole pattern of aerosols between Asia and Europe). The decrease in European sulfate aerosols has substantial effects on the Sahel summer precipitation increase, but the corresponding effect of increased Asian sulfate is unknown. Multi-model simulations in the Precipitation Driver and Response Model Intercomparison Project (PDRMIP) show, compared to decreased European aerosols, that increased Asian aerosols similarly enhance the Sahel summer precipitation but with different large-scale atmospheric circulation changes. Further analysis of the Sixth Coupled Model Intercomparison Project (CMIP6) simulations under historical attribution and various emission scenarios reinforces the results about the climate impacts of anthropogenic aerosols and suggests that in future scenarios with strong international cooperation and rapid climate mitigations (SSP2-45), the Sahel drought will be intensified likely due to the decline in Asian aerosol emissions. Our results suggest that Asian anthropogenic aerosols are likely a non-negligible driver of the recent recovery in Sahel precipitation amounts

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Characterizing Greater Houston's Aerosol by Air Mass During TRACER

During the TRacking Aerosol and Convection interaction ExpeRiment (TRACER), a suite of aerosol and cloud measurements were made using the Texas A&M Rapid Onsite Atmospheric Measurement Van (ROAM-V) mobile instrument platform. Joint ROAM-V/radiosonde deployments focused on sampling polluted marine and continental air masses to understand summertime convection along and across the sea-breeze front as it propagated through Houston. The polluted marine air mass at Seawolf Park, Galveston, TX was defined by two characteristic aerosol populations. Although the background total particle concentrations averaged 2,500 cm −3 , the air mass was also influenced by frequent but irregular periods of ship emission with significantly higher aerosol concentrations at times exceeding 34,000 cm −3 . Ship emission influenced periods, typically lasting <10 min, contained smaller, less hygroscopic particles resulting in a 69% relative decline in cloud condensation nuclei (CCN) activated fraction at 1% supersaturation compared to background periods. Measurements in continental air masses northwest of Houston revealed an average aerosol concentration of 5,208 cm −3 with a κ value near 0.1 reasonably describing the CCN population, independent of particle size. In continental air masses, substantial differences in particle size and CCN activation over small distances (<42 miles between sites) suggest considerable site-to-site variability in addition to the expected day-to-day differences. This small-scale variability makes it difficult to generalize continental air mass aerosol properties. Both coastal and inland locations had effective ice nucleating particles, but inland deployments observed the warmest nucleation temperature at −15.6°C compared to −17.8°C close to the coast. These measurements can reduce uncertainties in regional convection allowing models to improve understanding of aerosol-cloud interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Stratospheric aerosol injection can weaken the carbon dioxide greenhouse effect

Abstract Stratospheric aerosol injection is a proposed method for offsetting greenhouse gas-induced warming by introducing scattering aerosols into the lower stratosphere to reflect sunlight. Here we explore a potentially more efficient alternative: weakening the Earth’s greenhouse effect by deploying absorptive aerosols in the upper stratosphere (~10 hPa). These aerosols warm the carbon dioxide emission level—where outgoing longwave radiation is most sensitive to temperature—thereby enhancing top-of-atmosphere infrared emission without altering atmospheric carbon dioxide concentrations. Idealized climate model simulations indicate that this approach can reduce global temperatures an order of magnitude more efficiently per unit aerosol mass than conventional scattering-based interventions. Although based on simplified model experiments lacking interactive aerosol processes and operational constraints, our results identify a distinct physical mechanism for climate intervention, arguing for further research into the impacts—especially potential unintended side effects—of injecting absorptive aerosols into the upper stratosphere as an alternative solar radiation management strategy.

Environmental Sciences & Ecology↗
DOE OSTI2025

Quantitative infrared spectroscopy of aerosols: Mie theory modeling with experimental validation

Infrared spectroscopy is a well-established method for identifying solid, liquid, and gas-phase chemicals. Accurate infrared spectroscopic analysis requires reference libraries where library endmembers reflect all optical phenomena contributing to the observed spectra. Traditional spectral libraries most often contain molecular-based absorption spectra, but these do not account for the complex scattering effects that become significant when measuring aerosols. In this work, we combine the laboratory-derived, wavelength-dependent complex optical vectors ( n / k ) of liquid dioctyl sebacate (DOS) with Mie scattering theory and the Beer–Lambert law to generate synthetic infrared transmission spectra of aerosolized DOS. Additionally, we record experimental infrared transmission spectra using an FTIR spectrometer coupled to a simple aerosol chamber filled with a quantified number size distribution of aerosolized DOS. The modeled and measured spectra show strong agreement, with Mie scattering effects clearly altering the overall spectral shape as well as the positions and profiles of absorption features. The results demonstrate that synthetic spectra generated from n / k values can reliably capture aerosol-specific spectral behavior and thus serve as a foundation for building scalable, physics-based aerosol reference libraries to enable infrared spectroscopic detection of aerosols.

Salcido, Jessica M. O. [Pacific Northwest National↗
DOE OSTI2026

Examining the Impacts of Microphysical-Dynamical Feedbacks on Convective Clouds in Different Aerosol Environments Using Enhanced Observational and Modeling Strategies

This project investigated how microphysical–dynamical feedbacks influence deep convective clouds across a range of aerosol conditions, storm lifecycles, and meteorological regimes, and how these sensitivities depend on the modeling framework used to represent convection and microphysics. Using the Aerosol, Cloud, Precipitation, and Climate (ACPC) Working Group model intercomparison simulations of isolated deep convection in the Houston region, we found a robust warm-phase aerosol response in most cloud-resolving models. Increased aerosol loading tended to suppress warm-rain production, increase cloud water, and reduce surface rainfall and near-surface evaporation. These impacts were typically strongest early in the convective lifecycle, with the largest aerosol-driven differences occurring during the first half of storm evolution. The ice-phase response, on the other hand, varied widely across modeling frameworks, and differed in sign, timing, and vertical structure. Ice microphysical pathways and parameterizations are therefore leading sources of uncertainty in aerosol–deep convection interactions. Theoretical analyses further suggested that aerosol-driven invigoration through cold-phase processes was much weaker than previously hypothesized for cold-based storms, and in warm-based storms could even reduce updraft strength. These results imply that any invigoration signal is more likely linked to warm-phase processes and peaks early in storm development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Aerosol Model Benchmarking Repository: A toolkit for model intercomparison

The Aerosol Model Benchmarking Repository and Standards (AMBRS) project was initiated to provide tools and to establish community standards for benchmarking aerosol models. This report describes a set of open-source tools for building, running, and analyzing aerosol box model simulations in a standardized framework. The framework consists of three core components: AMBuilder, a CMake-based build system that compiles supported models consistently; AMBRS, a Python module that defines unified numerical experiments and executes them with aligned inputs; and PyParticle, an aerosol analysis package that standardizes output, computes diagnostics, and visualizes simulation results. Together, these tools enable reproducible intercomparison of aerosol schemes and support process-level evaluation of how model simplifications affect predictions of size distributions, cloud condensation nuclei activity, and other relevant properties relevant for the Earth-Energy system. Beyond its role in benchmarking, AMBRS provides a platform for studying aerosol processes across scales and can be used to generate training data for AI/ML applications in support of a broader hierarchical aerosol modeling strategy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Understanding aerosol–cloud interactions using a single-column model for a cold-air outbreak case during the ACTIVATE campaign

Marine boundary layer clouds play a critical role in Earth's energy balance. Their microphysical and radiative properties are highly impacted by ambient aerosols and dynamic forcings. In this study, we evaluate the representation of these clouds and related aerosol–cloud interaction processes in the single-column version of the E3SM climate model (SCM) against field measurements collected during the NASA ACTIVATE campaign over the western North Atlantic, as well as intercompare results with high-resolution process level models. We show that E3SM SCM reproduces the macrophysical properties of post-frontal boundary layer clouds in a cold-air outbreak (CAO) case well. However, it generates fewer but larger cloud droplets compared to aircraft measurements. Further sensitivity tests show that the underestimation of both aerosol number concentration and vertical velocity variance contributes to this bias. Aerosol–cloud interactions are examined by perturbing prescribed aerosol properties in E3SM SCM with fixed dynamics. Higher aerosol number concentration or hygroscopicity leads to more numerous but smaller cloud droplets, resulting in a stronger cooling via shortwave cloud forcing. This apparent Twomey effect is consistent with prior climate model studies. The cloud liquid water path shows a weakly positive relation with cloud droplet number concentration due to precipitation suppression. This weak aerosol effect on cloud macrophysics may be attributed to the dominant impact of strong dynamical forcing associated with the CAO. Our findings indicate that the SCM framework is a key tool to bridge the gap between climate models, process level models, and field observations to facilitate process level understanding.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Regime-based aerosol–cloud interactions from CALIPSO-MODIS and the Energy Exascale Earth System Model version 2 (E3SMv2) over the Eastern North Atlantic

This study investigates aerosol-cloud interactions in marine boundary layer (MBL) clouds using an advanced deep-learning-driven synoptic-regime-based framework, combining satellite data (CALIPSO vertically resolved aerosol extinction and MODIS cloud properties) with 1° nudged Energy Exascale Earth System Model version 2 (E3SMv2) simulation over the Eastern North Atlantic (ENA; ∼10°×10°, 2006–2014). The E3SMv2 captures observed seasonal variations in cloud droplet number concentrations (N d ) and liquid water path (LWP), though it systematically underestimates N d . We then partition ENA meteorology into four synoptic regimes (Pre-Trough, Post-Trough, Ridge, Trough) via a deep-learning clustering of ERA5 reanalysis fields, enabling regime-dependent aerosol-cloud interactions analyses. Both satellite and E3SMv2 exhibit an inverted-V LWP-N d relationship. In Post-Trough and Ridge regimes, the satellite shows stronger negative LWP-N d sensitivities than in Pre-Trough regime. The Trough regime displays a muted satellite LWP response. In comparison, the model predicts more exaggerated LWP responses across regimes, with LWP increasing too quickly at low N d and decreasing more sharply at high N d , especially in Pre-Trough and Trough regimes. These exaggerated model LWP sensitivities may stem from uncertainties in representing drizzle processes, entrainment, and turbulent mixing. As for N d susceptibility to aerosols, N d increases with MBL aerosol extinction in both datasets, but the simulated aerosol-cloud interactions appear oversensitive to meteorological conditions. Overall, E3SMv2 better captures aerosol effects under regimes that favor stratiform clouds (Post-Trough, Ridge), but performance deteriorates for regimes with deeper, dynamically complex clouds (Trough), highlighting the need for improved representations of those cloud processes in climate models.

Environmental sciences↗
DOE OSTI2025

Atmospheric processing and aerosol aging responsible for observed increase in absorptivity of long-range-transported smoke over the southeast Atlantic

Biomass burning aerosol (BBA) from agricultural fires in southern Africa contributes about one-third of the global carbonaceous aerosol load. These particles have strong radiative effects in the southeast Atlantic (SEA), which depend in part on the radiative contrast between the aerosol layer in the free troposphere (FT) and the underlying cloud layer. However, there is large disagreement in model estimates of aerosol-driven climate forcing due to uncertainties in the vertical distribution, optical properties, and life cycle of these particles. This study applies a novel method combining remote sensing observations with regional model outputs to investigate the aging of the BBA and its impact on the optical properties during transatlantic transport from emission sources in Africa to the SEA. Results show distinct variations in extinction Ångström exponent (EAE) and single-scattering albedo (SSA) as aerosols age. Near the source, fresh aerosols are characterized by low mean SSA (0.84) and high EAE (1.85), indicating smaller, highly absorbing particles. By isolating marine contributions from the total column during BBA transport across the SEA, our analysis reveals an initial decrease in BBA absorptivity, with mean FT SSA of 0.87 after 6–7 d, followed by increased absorptivity with mean FT SSA of 0.84 after 10 d, suggesting enhanced absorption due to chemical aging. These findings indicate that BBA becomes more absorbing during extended transport across the SEA, with implications for reducing model uncertainties. Our remote-sensing-based results agree well with previous in situ studies and offer new insights into aerosol–radiation interactions and the energy balance over the SEA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Aerosol-deep convection interaction based on joint cell-thermal tracking in Large Eddy Simulations during the TRACER campaign

In cumulus clouds, aerosol concentrations control cloud droplet concentrations, modifying cloud radiative properties, precipitation processes, and cloud electrification. However, mechanisms of aerosol-deep convection interactions are not well understood due to complex cloud dynamics and microphysics. We investigate the interaction of aerosols with isolated deep convection using Large Eddy Simulations of two cases during the TRacking Aerosol Convection interactions ExpeRiment (TRACER) near Houston, Texas, using a joint cell-thermal tracking algorithm. Cumulus thermals are droplet generators, since supersaturation and droplet nucleation coincide with thermal centers, where the strongest updrafts occur. Primary ice crystal formation does not take place inside thermals, but at layers where previous thermals detrained moisture. As subsequent thermals containing supercooled droplets penetrate these layers, hail and graupel form at or near these thermals. Higher aerosol concentrations result in higher droplet concentrations that suppress drizzle, delay warm rain processes, and transport more moisture aloft. This increases snow and ice amount, as well as graupel and hail, leading to more lightning. Polluted thermals initiate at slightly higher altitudes, and are slightly larger and faster, suggesting a weak invigoration. We also find more thermals per cell, but fewer isolated cells, since convection is more aggregated and intense, especially near the end of the 24 h simulation. Non-linear mesoscale feedback likely triggered by temperature and moisture responses to aerosol-thermal interactions causes the aggregation. Time-lagged aerosol-reinitialization experiments show that the mesoscale response is the predominant forcing for the invigoration. These changes happen within one day, on a smaller scale than previously suggested.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Implications of Sea Breeze Circulations on boundary layer aerosols in the southern coastal Texas region

The Sea Breeze Circulation (SBC) influences atmospheric processes at multiple scales in coastal regions. Understanding how SBCs impact the aerosol number budget and aerosol–cloud interaction processes is essential. This study investigates sea breeze–aerosol interactions (SAIs) during 46 summertime SBC events using data from the TRacking Aerosol Convection Interactions Experiment (TRACER) field campaign across urban (main) and rural (supplemental) coastal sites in southern Texas. Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) simulations complement observations to explore spatio-temporal meteorological controls on boundary layer aerosols. During the summertime, Sea Breeze Fronts (SBF) penetrating inland transported cool, moist air over the land, introducing air masses with distinct properties compared to the preexisting continental air. These SAIs cause variability in number concentrations of up to a factor of two, with events typically lasting ∼ 5 h before returning to background conditions. SAI impact on aerosols varies with site proximity to water and the preceding sea breeze (SB) history, primarily affecting the marine-influenced accumulation mode. The main site, influenced by both Galveston Bay and the Gulf of Mexico, reflects a stronger marine influence. In contrast, a supplemental site, at a similar shoreline distance but exposed only to the Gulf of Mexico and typically upstream of the urban core, samples SB air that has traversed land and partially regained continental characteristics. Simulations show that the regional SAIs extend ∼ 50 km inland and reach up to the boundary layer height. SAIs further decrease cloud condensation nuclei relevant aerosol number concentrations in ∼ 20 % of events during SBF passage.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Burning conditions and transportation pathways determine biomass-burning aerosol properties in the Ascension Island marine boundary layer

African biomass-burning aerosol (BBA) in the southeast Atlantic Ocean (SEA) marine boundary layer (MBL) is an important contributor to Earth’s radiation budget yet its representation remains poorly constrained in regional and global climate models. Data from the Layered Atlantic Smoke Interactions with Clouds (LASIC) field campaign on Ascension Island (-7.95° N, -14.36° E) detail how fire source regions (burning conditions and fuel type), transport pathways, and longer-term chemical processing affect the chemical, microphysical, and optical properties of the BBA in the remote MBL between June and September of 2017. Ten individual plume events characterize the seasonal evolution of BBA characteristics. Inefficient burning conditions, determined by the mass ratio of refractory black carbon to above-background carbon monoxide (rBC:ΔCO), enhance organic- and sulfate-rich aerosol concentrations in June–July. In contrast, the heart of the burning season exhibited higher rBC:ΔCO values indicative of efficient burning conditions, correlating with more rBC-enriched BBA. Toward the end of the burning season, a mix of burning conditions results in increased variation of the BBA properties. The BBA transit to Ascension Island was predominantly through slow-moving pathways in the MBL and lower free troposphere (FT), facilitating prolonged chemical transformations through heterogeneous and aqueous phase processes. Heterogeneous oxidation can persist for up to 10 days, resulting in a considerable decrease in organic aerosol (OA) mass. OA to rBC mass ratios (OA:rBC) in the MBL between 2 and 5 contrast to higher values of 5 to 15 observed in the nearby FT. Conversely, early-season aqueous-phase processes primarily contributed to aerosol oxidation and some aerosol production, but not appreciable aerosol removal. These two chemical processes yield more light-absorbing BBA in the MBL than in the FT and explain the notably low scattering albedo at 530 nm (SSA 530 ) values (< 0.80) at Ascension Island. This study establishes a robust correlation between SSA 530 and OA:rBC across both MBL and FT, underscoring the dependency of optical properties on chemical composition. These findings highlight how the interplay between chemical composition and atmospheric processing can be improved in global and regional climate models. Questions remain on the mixing of aerosols with different pathway histories, and on what accounts for the doubling of the mass absorption coefficient in the boundary layer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Prognostic simulations of mixed-phase clouds with model AC-1D v1.0: the impact of aerosol types and freezing parameterizations on ice crystal budgets

Mixed-phase clouds at high latitudes contribute to the uncertainty in predicting cloud feedbacks and climate sensitivity, mainly due to the complexity of microphysical processes that influence the partitioning between the supercooled liquid and ice phases, and hence, cloud radiative effects on regional scales. Particularly in Arctic mixed-phase clouds, the activation of ice-nucleating particles (INPs) from various aerosol populations remains a leading source of uncertainty. We developed an aerosol-cloud one-dimensional (AC-1D) model, which provides a novel framework to prognostically treat INP and ice crystal budgets while explicitly accounting for polydisperse and multicomponent aerosol that activate INPs following different freezing parameterizations. The AC-1D model is informed by large-eddy simulations to probe the impact of INP representation on predicted ice crystal number concentrations (N i ) and ice crystal budgets in mixed-phase Arctic stratus. We apply three immersion freezing (IMF) parameterizations, two time-independent (singular) and one time-dependent (classical nucleation theory), to predict the evolution of the INP reservoir and resulting ice crystal budget from polydisperse mineral dust, organic (humic-like substances), and sea spray aerosol particle size distributions. Our analysis focuses on how variations in aerosol number concentration and cloud system parameters such as cloud cooling rate, cloud-top entrainment rate, and ice crystal fall speed influence the INP reservoir and ice crystal budgets. Furthermore, this study investigates the competitive ice nucleation dynamics in mixed aerosol environments and provides a process-level quantification of the INP budget terms, which directly controls ice crystal budgets. For all studied case scenarios, the aerosol types and associated particle size distributions significantly impact INP and N i , and the choice between a time-dependent and a singular freezing description yields orders-of-magnitude differences in the predicted INP and N i over the 10 h simulation time, reflecting typical cloud lifetimes. Our results show that the influence of cloud cooling, INP entrainment, and sedimentation varies significantly depending on the chosen freezing parameterization. These findings underscore the critical need for robust IMF parameterizations and precise cloud system observations to enhance the accuracy of models in predicting mixed-phase cloud structure and evolution.

Arctic clouds↗
DOE OSTI2025

Future Anthropogenic Land Use Change Impacts on Carbonaceous Aerosol and Implications for Climate and Air Quality

Future anthropogenic land use change (LUC) may alter atmospheric carbonaceous aerosol (black carbon and organic aerosol) burden by perturbing biogenic and fire emissions. However, there has been little investigation of this effect. We examine the global evolution of future carbonaceous aerosol under the Shared Socioeconomic Pathways projected reforestation and deforestation scenarios using the CESM2 model from present‐day to 2100. Compared to present‐day, the change in future biogenic volatile organic compounds emission follows changes in forest coverage, while fire emissions decrease in both projections, driven by trends in deforestation fires. The associated carbonaceous aerosol burden change produces moderate aerosol direct radiative forcing (−0.021 to +0.034 W/m 2 ) and modest mean reduction in PM 2.5 exposure (−0.11 μg/m 3 to −0.23 μg/m 3 ) in both scenarios. We find that future anthropogenic LUC may be more important in determining atmospheric carbonaceous aerosol burden than direct anthropogenic emissions, highlighting the importance of further constraining the impact of LUC.>

anthropogenic land use change↗
DOE OSTI2024

Contribution of Speciated Monoterpenes to Secondary Aerosol in the Eastern North Atlantic

Extension of laboratory results suggests that monoterpenes, a subset of marine biogenic volatile organic compounds, might play a competitive role in secondary aerosol formation in the remote marine atmosphere, where the oxidation of dimethyl sulfide has traditionally been thought to dominate. However, the current assessment of the role of monoterpenes in secondary aerosol formation in the remote marine atmosphere is limited by the scarcity of speciated monoterpene measurements and the complete absence of collocated measurements of particle chemical composition and monoterpene speciation. Here, in this paper, we present measurements of gas-phase volatile organic compounds, with particular focus on speciated monoterpenes, and commensurate measurements of aerosol chemical composition in the Eastern North Atlantic. The average monoterpene concentration in periods of marine air was 14 ± 10 ppt, and the dominant isomer was β-pinene (46 ± 10%), with other contributions from α-pinene, limonene, and β-ocimene. The total monoterpene concentration in marine air was greater than that of isoprene by a factor of 3.9 on average, in contrast to prior research and potentially due to the large β-pinene contribution. Monoterpenes were significantly smaller in concentration than dimethyl sulfide, which was also highlighted by the substantial contribution of sulfate to non-refractory submicron aerosol. The mean and interquartile range of the sulfate to organic aerosol mass ratio in clean marine air were 2.7 (0.7–3.4). Finally, a simple box model analysis showed that the BVOC precursors, dimethyl sulfide, methanethiol, monoterpenes, and isoprene, could sustain the measured sulfate to organic aerosol ratio in clean marine air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sensitivities of Large Eddy Simulations of Aerosol Plume Transport and Cloud Response

Abstract Cloud responses to surface‐based sources of aerosol perturbation partially depend on how turbulent transport of the aerosol to cloud base affects the spatial and temporal distribution of aerosol. Here, scenarios of plume injection below a marine stratocumulus cloud are modeled using large eddy simulations coupled to a prognostic bulk aerosol and cloud microphysics scheme. Both passive plumes, consisting of an inert tracer, and active plumes are investigated, where the latter are representative of saltwater droplet plumes such as have been proposed for marine cloud brightening. Passive plume scenarios show higher in‐plume cloud brightness (relative to out‐of‐plume) due to the predominant transport of the passive plume tracer from the near‐surface to the cloud layer within updrafts. These updrafts rise into brighter areas within the cloud deck, even in the absence of an aerosol perturbation associated with an active plume. Comparing albedo at in‐plume to out‐of‐plume locations associates the inert plume with the brightest cloud locations, without any causal effect of the plume on the cloud. Numerical sensitivities are first assessed to establish a suitable model configuration. Then sensitivity to particle injection rate is investigated. Trade‐offs are identified between the number of injected particles and the suppressive effect of droplet evaporation on plume loft and spread. Furthermore, as the near‐field in‐plume brightening effect does not depend significantly on injection rate given a suitable definition of perturbed versus unperturbed regions of the flow, plume area is a key controlling factor on the overall cloud brightening effect of an aerosol perturbation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Causal machine learning uncovers conditions for convective intensification driven by organic and sulfate aerosols

Aerosols are often hypothesized to invigorate deep convective clouds (DCCs), but observational evidence remains limited and inconclusive. Clarifying this hypothesis is critical for regions vulnerable to thunderstorms and flooding, particularly highly polluted coastal cities. Leveraging a novel causal discovery–inference pipeline and high-resolution observations near Houston, TX, we identify multiple causal pathways among aerosols (mostly organic and sulfate), DCCs, and meteorological factors. However, a direct causal link from aerosols to DCCs is found to be uncommon, occurring in less than 35% of analyzed scenarios, and is characterized by strong conditionality and nonlinearity. When aerosol impacts on DCCs do occur, they can be substantial, enhancing DCC core heights by approximately 1.7 km, with 92% of this effect concentrated in warmer-phase cloud regions. Notably, the presence of sea breezes and the inclusion of all measured aerosol particles each enhance DCCs in over 95% of aerosol-sensitive cases.

54 ENVIRONMENTAL SCIENCES↗