SEARCH · Search NASA

Results for “AEROTHERMODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Computational aerothermodynamics

Computational aerothermodynamics concerns the coupling of real gas effects with equations of motion to include thermochemical rate processes for chemical and energy exchange phenomena. These processes concern the creation and destruction of gas species by chemical reactions and the transfer of energy between the various species and between the various energy modes (e.g., translation, rotation, vibration, ionization, dissociation/recombination, etc.) of the species. To gain some insight into when such phenomena occur for current and future aerospace flight vehicles the author shows the flight regimes of some typical vehicles (e.g., Concord, aerospace plane, Space Shuttle, associated space transfer vehicles, Apollo entry vehicle, etc.) in terms of flight altitude and flight speed. Also indicated are regimes where chemical reactions such as dissociation and ionization are important and where nonequilibrium thermochemical phenomena are important.

Deiwert, George S.↗

NASA NTRS1990

Application of the LAURA code for slender-vehicle aerothermodynamics

Application of a three-dimensional thin-layer Navier-Stokes code (LAURA) to compute the laminar, perfect gas aerothermodynamics of slender vehicles is demonstrated. Comparison of solutions with experimental data enabled an assessment of the code's aerodynamic heating prediction capabilities. The results show radial grid refinement to a wall cell Reynolds number of 2 to be accurate for predicting aerodynamic heating to a slender cone. Additional comparisons for an 80 deg slab-delta wing and a generic Aero-Space Plane vehicle show the method to be generally accurate using this radial cell spacing. Discrepancies between the predicted and measured heating in a region of crossflow separation on the Aero-Space Plane geometry are noted which indicates the need for further study. While additional applications and comparisons are required to fully test the LAURA program, the results of this study demonstrate the current level of confidence and the engineering utility of this particular code.

Thompson, Richard A.↗

NASA NTRS1989

Aeroassist flight experiment aerodynamics and aerothermodynamics

The problem is to determine the transitional flow aerodynamics and aerothermodynamics, including the base flow characteristics, of the Aeroassist Flight Experiment (AFE). The justification for the computational fluid dynamic (CFD) Application stems from MSFC's system integration responsibility for the AFE. To insure that the AFE objectives are met, MSFC must understand the limitations and uncertainties of the design data. Perhaps the only method capable of handling the complex physics of the rarefied high energy AFE trajectory is Bird's Direct Simulation Monte Carlo (DSMC) technique. The 3-D code used in this analysis is applicable only to the AFE geometry. It uses the Variable Hard Sphere (VHS) collision model and five specie chemistry model available from Langley Research Center. The code is benchmarked against the AFE flight data and used as an Aeroassisted Space Transfer Vehicle (ASTV) design tool. The code is being used to understand the AFE flow field and verify or modify existing design data. Continued application to lower altitudes is testing the capability of the Numerical Aerodynamic Simulation Facility (NASF) to handle 3-D DSMC and its practicality as an ASTV/AFE design tool.

Brewer, Edwin B.↗

NASA NTRS1989

Nonequilibrium hypersonic aerothermodynamics

Nonequilibrium phenomena in hypersonic flows are examined on the basis of theoretical models and selected experimental data, in an introduction intended for second-year graduate students of aerospace engineering. Chapters are devoted to the physical nature of gas atoms and molecules, transitions of internal states, the formulation of the master equation of aerothermodynamics, the conservation equations, chemical reactions in CFD, the behavior of air flows in nonequilibrium, experimental aspects of nonequilibrium flow, a review of experimental results, and gas-solid interaction. Diagrams, graphs, and tables of numerical data are provided.

Park, Chul↗

NASA NTRS1991

Aerothermodynamic heating environment and thermal protection materials comparison for manned Mars-earth return vehicles

The aerothermodynamic environment during the earth return portion of a specific manned Mars mission is studied. Particular attention is given to the earlier smaller crew return capsule and its thermal protection system requirements. Data are presented on the stagnation region of a generic Mars return capsule. Insulation material thicknesses required to maintain allowable structural temperatures throughout a prolonged heat soak period are estimated.

Henline, William D.↗

NASA NTRS1991

Aerothermodynamic environments of aerobraking vehicles for manned Mars missions

The aerothermodynamic environments of manned spacraft aerobraking in the Martian and earth atmospheres are evaluated. Thermal performance of aerobrake concepts are examined for current cryogenic-aerobrake and advanced propulsion missions entailing three different modes of aerobraking: (1) aerocapture into an orbit about Mars, (2) descent and landing at Mars, and (3) Mars return direct entry at earth. Analyses for these vehicles and modes included both radiative and convective heating, where radiative heating is shown to be a significant portion of the total stagnation point heating induced on the vehicle. A comprehensive parametric study of the effects of ballistic coefficient, nose radius, entry velocity, and L/D on stagnation point heating is described. Optimal nose radii for ranges of ballistic coefficient and entry velocity are determined. The peak heating rates are shown to be 83 W/sq cm and 90 W/sq cm for a low and high L/D Mars transfer vehicle configuration, respectively. Heating profiles for these vehicles using boundary layer techniques show that a high L/D shape will result in a smaller high-temperature region provided the flow is laminar. An examination of a crew return vehicle for a Mars return direct entry trajectory shows that the thermal protection for this aerobrake will require an ablative material for heat rejection due to the large heating rates (about 1 kW/sq cm).

Ledoux, Stephen T.↗

NASA NTRS1992

Applications of the ram accelerator to hypervelocity aerothermodynamic testing

A ram accelerator used as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerodynamics research is presented. It is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled down a stationary tube filled with a tailored combustible gas mixture. Ram accelerator operation has been demonstrated at 39 mm and 90 mm bores, supporting the proposition that this launcher concept can be scaled up to very large bore diameters of the order of 30-60 cm. It is concluded that high quality data obtained from the tube wall and projectile during the aceleration process itself are very useful for understanding aerothermodynamics of hypersonic flow in general, and for providing important CFD validation benchmarks.

Bruckner, A. P.↗

NASA NTRS1992

Shuttle entry aerothermodynamic flight research - The Orbiter Experiments (OEX) Program

Results of the OEX program are summarized with emphasis on the information on entry aerothermodynamic phenomena derived from Space Shuttle operations. The discussion focuses on OEX experiment complement and operational history, freestream environment and vehicle attitude data, aerodynamic force and moment data, aerodynamic surface data, and vehicle configuration data. Attention is also given to orbiter aerodynamic performance, stability and control, high-altitude atmospheric density variability, direct simulation Monte Carlo validation, orbital drag variation, and computational fluid dynamic technique validation.

Throckmorton, David A.↗

NASA NTRS1992

The ballistic range - Its role and future in aerothermodynamic testing

Aerothermodynamic testing requirements for future missions are reviewed, and the ballistic range testing capabilities necessary to meet these requirements are outlined. The four issues of velocity, chemical scaling, cost analysis of ballistics facilities is presented. It is concluded that modern instrumentation and a launcher of 5 to 10 cm diameter can meet the requirements and be cost effective. Finally, recommendations for upgrading existing facilities and instrumentation to meet the needed ballistic range test capability in a cost efficient manner are presented.

Chapman, Gary T.↗

NASA NTRS1984

AWT Circuit Aerothermodynamics Discussion

The aerothermodynamic performance of the Altitude Wind Tunnel is assessed in order to define the proper component and system configurations to insure desired tunnel flow. This is accomplished through experimental model testing of components, coupled components, complete circuit and research models. Viewgraphs show what types of computer codes were used on the various sections of the tunnel as well as how and where experimental data was acquired.

Povinelli, Louis A.↗

NASA NTRS1992

Aerothermodynamic flow phenomena of the airframe-integrated supersonic combustion ramjet

The unique component flow phenomena is discussed of the airframe-integrated supersonic combustion ramjet (scramjet) in a format geared towards new players in the arena of hypersonic propulsion. After giving an overview of the scramjet aerothermodynamic cycle, the characteristics are then covered individually of the vehicle forebody, inlet, combustor, and vehicle afterbody/nozzle. Attention is given to phenomena such as inlet speeding, inlet starting, inlet spillage, fuel injection, thermal choking, and combustor-inlet interaction.

Walton, James T.↗

NASA NTRS1991

Overview of aerothermodynamic loads definition study

The objective of the Aerothermodynamic Loads Definition Study is to develop methods of accurately predicting the operating environment in advanced Earth-to-Orbit (ETO) propulsion systems, such as the Space Shuttle Main Engine (SSME) powerhead. Development of time averaged and time dependent three dimensional viscous computer codes as well as experimental verification and engine diagnostic testing are considered to be essential in achieving that objective. Time-averaged, nonsteady, and transient operating loads must all be well defined in order to accurately predict powerhead life. Described here is work in unsteady heat flow analysis, improved modeling of preburner flow, turbulence modeling for turbomachinery, computation of three dimensional flow with heat transfer, and unsteady viscous multi-blade row turbine analysis.

Gaugler, Raymond E.↗

NASA NTRS1993

Aerothermodynamic performance and thermal protection design for blunt re-entry bodies at L/D = 0.3

Aerodynamic heating and thermal protection design analyses were performed for three blunt re-entry bodies at an L/D = 0.3 returning from low earth orbit. These configurations consisted of a scaled up Apollo command module, a Viking re-entry vehicle, and an Aeroassist Flight Experiment (AFE) aerobrake, each with a maximum diameter of 4.42 m. The aerothermodynamic analysis determined the equilibrium stagnation point heating rate and heat load for nominal and 3-sigma re-entry trajectories and the distribution of heating along the pitch and yaw planes for each of the vehicles at the time of highest heat flux. Using the predicted heating rates and heating distributions, a Thermal Protection System (TPS) design with flight certified materials was tailored for each of the configurations. Results indicated that the heating to the corner of the Viking aeroshell would exceed current limits of reusable tile material. Also, the maximum heating for the AFE would be 15 percent greater than the maximum heating for the Apollo flying the same trajectory. TPS designs showed no significant advantage in TPS weight between the different vehicles; however, heat-shield areal density comparisons showed the Apollo configuration to be the most efficient in terms of TPS weight.

Caram, Jose M.↗

NASA NTRS1993

Aerothermodynamics of a MESUR Martian entry

Computational fluid dynamics models for the thermodynamics and transport properties used in an equilibrium version of the Langley Aerothermodynamics Upwind Relaxation Algorithm (LAURA) for Martian Atmospheric entries are described. In addition, the physical models used in a nonequilibrium version of LAURA for Martian-entry flows are described. Uncertainties exist in defining constants used in the transport properties for the equilibrium model and in many of the physical models for the nonequilibrium version. Solutions from the two codes using the best available constants are examined at the Martian-entry conditions characteristic of the Mars Environmental Survey (MESUR) mission. While the flowfields are near thermal equilibrium, chemical nonequilibrium effects are present in the entry cases examined. Convective heating at the stagnation point for these flows (assuming fully catalytic wall boundary conditions) is approximately 100 W/sq cm. Radiative heating is negligible.

Mitcheltree, R. A.↗

NASA NTRS1992

An overview of Ames experimental aerothermodynamics

This paper reviews the recent experimental research activities on aerothermodynamics within NASA Ames Research Center. The activities included in this review are those in (1) the electric arc-driven shock tubes, (2) the combustion-driven shock tube, (3) the ballistic ranges, and (4) the arc-jet wind tunnel facilities. The paper is a collection and collation of the papers published previously in the open literature on the activities in these facilities. The paper highlights the contributions made by each facility in the high temperature real-gas flow regimes.

Park, C.↗

NASA NTRS1993

Nonequilibrium effects on the aerothermodynamics of transatmospheric and aerobraking vehicles

A 3D CFD algorithm is used to study the effect of thermal and chemical nonequilibrium on slender and blunt body aerothermodynamics. Both perfect gas and reacting gas air models are used to compute the flow over a generic transatmospheric vehicle and a proposed lunar transfer vehicle. The reacting air is characterized by a translational-rotational temperature and a vibrational-electron-electronic temperature and includes eight chemical species. The effects of chemical reaction, vibrational excitation, and ionization on lift-to-drag ratio and trim angle are investigated. Results for the NASA Ames All-body Configuration show a significant difference in center of gravity location for a reacting gas flight case when compared to a perfect gas wind tunnel case at the same Mach number, Reynolds number, and angle of attack. For the same center of gravity location, the wind tunnel model trims at lower angle of attack than the full-scale flight case. Nonionized and ionized results for a proposed lunar transfer vehicle compare well to computational results obtained from a previously validated reacting gas algorithm. Under the conditions investigated, effects of weak ionization on the heat transfer and aerodynamic coefficients were minimal.

Hassan, Basil↗

NASA NTRS1993

Space Shuttle hypersonic aerodynamic and aerothermodynamic flight research and the comparison to ground test results

Aerodynamic and aerothermodynamic comparisons between flight and ground test for the Space Shuttle at hypersonic speeds are discussed. All of the comparisons are taken from papers published by researchers active in the Space Shuttle program. The aerodynamic comparisons include stability and control derivatives, center-of-pressure location, and reaction control jet interaction. Comparisons are also discussed for various forms of heating, including catalytic, boundary layer, top centerline, side fuselage, OMS pod, wing leading edge, and shock interaction. The jet interaction and center-of-pressure location flight values exceeded not only the predictions but also the uncertainties of the predictions. Predictions were significantly exceeded for the heating caused by the vortex impingement on the OMS pods and for heating caused by the wing leading-edge shock interaction.

Iliff, Kenneth W.↗

NASA NTRS1995

A perspective on computational aerothermodynamics: Current modeling difficulties

Future hypersonic vehicles are going to be designed largely with computational fluid dynamic methods based on appropriate physical models. The question on how much of this design process can be completed with the present state of computational aerothermodynamics is addressed. Some limitations of current models are discussed. It is shown that much more research is required before it will be possible to accurately design a hypersonic vehicle for all of its flight conditions. The quantities that must be computed accurately so that a minimum weight hypersonic vehicle can be designed are discussed. The use of computational fluid dynamics methods coupled with current thermochemical models in order to compute the quantities under specific flow conditions is considered.

Candler, Graham V.↗