Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Microemulsion-mediated solvothermal synthesis of tin(IV) hydrogen phosphate rose-like three-dimensional nanostructures and their electrochemical properties

Novel rose-like three-dimensional Sn(HPO{sub 4}){sub 2}.H{sub 2}O nanostructures self-assembled by tightly stacked nanopetals were successfully synthesized by a simple cetyltrimethylammonium bromide (CTAB)/water/cyclohexane/n-pentanol microemulsion system under solvothermal conditions for the first time. A series of compared experiments were carried out to investigate the factors that influence the morphology and size of the products. It was found that the molar ratio of water to CTAB and the concentration of SnCl{sub 4} aqueous solution play important roles in the formation of the rose-like nanostructures. A possible formation mechanism of rose-like nanostructures was proposed, which may be related to the crystal structure of Sn(HPO{sub 4}){sub 2}.H{sub 2}O and the spherical micelles formed by the microemulsion. The electrochemical properties of Sn(HPO{sub 4}){sub 2}.H{sub 2}O were investigated through cyclic voltammetry (CV) measurements. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and field-emission scanning electron microscope (FE-SEM) were used to characterize the products.

36 MATERIALS SCIENCE↗

Synthesis of mesoporous silica materials (MCM-41) from iron ore tailings

Highly ordered mesoporous materials were successfully synthesized by using the iron ore tailings as the silica source and n-hexadecyltrimethyl ammonium bromide as the template. The samples were detail characterized by powder X-ray diffraction, scanning electron microscope, high-resolution transmission electron microscopy and N{sub 2} physisorption. The as-synthesized materials had high surface area of 527 m{sup 2} g{sup -1} and the mean pore diameter of 2.65 nm with a well-ordered two-dimensional hexagonal structure. It is feasible to prepare mesoporous MCM-41 materials using the iron ore tailings as precursor.

36 MATERIALS SCIENCE↗

Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

36 MATERIALS SCIENCE↗

Transformation of Mo and W thiosalts into unsupported sulfide catalysts: A temperature dependent in-situ spectroscopic investigation

Highlights: • TPD–MS results suggest that the majority of S remains in the solid sample after decomposition. • Decomposition of the (CH{sub 3}){sub 4}N is not directly correlated with that of the MS{sub 4}{sup 2−} species. • Surface of materials does not track directly with the bulk at various treatment temperatures. • ATT-derived materials retained a significant amount of +6 state consistent with the precursor. - Abstract: The thermal decomposition of ammonium thiomolybdate (ATM), ammonium thiotungstate (ATT), tetramethylammonium thiomolybdate (TMATM) and tetramethylammonium thiotungstate (TMATT) are investigated as a function of temperature by using thermogravimetric analysis (TGA), temperature-programmed decomposition with mass spectroscopy (TPS–MS), in-situ Fourier transform infrared (FTIR) and Raman spectroscopies, and X-ray photoelectron spectroscopy (XPS). The results allow for correlations to be made between the changes in the bulk and surface structures of the materials, and the evolution of gas-phase decomposition products. The major difference between the ammonium and tetramethylammonium precursors is the complexity of the thermal decomposition profile, which is found to follow two steps over a wide temperature range for the former, but one step over a relatively narrow range for the latter materials. Raman and FTIR spectra reveal the decomposition of the ammonium and tetramethylammonium groups, along with the decomposition of the initial sulfide structures to metal disulfides. For both sets of precursors, XPS results show that the surface of the resulting materials at various temperatures of treatment does not track directly with the state of the bulk material. While the ATM, TMATM, and TMATT-derived material surfaces are reduced to the 4{sup +} state at the highest temperature, indicating disulfides, the ATT-derived materials still retained a significant amount of W{sup 6+} state consistent with the starting precursor.

36 MATERIALS SCIENCE↗

Preparation and characterization of nanocrystalline CuO powders with the different surfactants and complexing agent mediated precipitation method

Highlights: • CuO nanostructures by surfactants mediated method. • Structural and optical properties of CuO nanostructures changes under the effect of surface modifier. • Citric acid assisted is the best, in terms of size, morphology and optical properties than that of CTAB, SDS and PEG-400. - Abstract: Nanostructures of copper oxide (CuO) was synthesized into crystallite sized ranging from 20 to 50 nm in the presence of different surfactants, and complex agent such as cityl tri methyl ammonium bromide (CTAB), sodium do decyl sulfate (SDS), poly ethylene glycol (PEG-400) and citric acid via a precipitation route. Variations in several parameters and their effects on the structural and optical properties of CuO nanostructures (crystallite size, morphology and band gap) were investigated by XRD, FTIR, SEM and UV analysis. The UV–visible absorption spectra of the different surfactants and complexing agent assisted CuO nanostructures indicates that the estimated optical band gap energy value (1.94–1.98 eV) is higher than that of the bulk CuO value (1.4 eV), which is attributed to the quantum confinement effect. The formation mechanism of different surfactants and complexing agent assisted CuO nanostructures is also proposed.

36 MATERIALS SCIENCE↗

Facile synthesis of gold nanopuncheons with high-index facets and their SERS effects on Rhodamine 6G

Highlights: • Au nanopuncheons with high-index facets have been prepared by seed-mediated growth. • The nanopuncheons are enclosed by 24 planes of (2 5 0), (3 0 1) and 2 (0 1 0) planes. • The nanopuncheons showed high SERS activity toward Rhodamine 6G. - Abstract: Au nanopuncheons with exposed high-index facets have been synthesized in high-yield by employing didodecyldimethylammonium bromide (DDAB) as surfactant in one-step seed-mediated growth. Transmission electron microscopy (TEM) characterization showed that the as-prepared Au nanopuncheons possessed 24 high index facets of (2 5 0), (3 0 1), and 2 (0 1 0) planes. Due to the high density of atomic steps and kinks in the structure, the Au nanopuncheons exhibited high surface enhanced Raman scattering (SERS) activity toward Rhodamine 6G.

36 MATERIALS SCIENCE↗

Preparation of fluorescent carbon dots and their interaction with human-transferrin (hTf)

Highlights: • Glycine–modified Carbon dots (G-CDs) with high fluorescent quantum yield (QY = 31%) were prepared by microwave-assisted method. • G-CDs were stability at biological system, and had low cytotoxicity. • Human transferrin (hTf) had one type of binding site with G-CDs, and the fluorescence quenching mode was static quenching process. - Abstract: Luminescent carbon dots (CDs) are new fluorescent materials and widely used in biomedical fields. In this paper, CDs were prepared using citric acid and glycine (denoted G-CDs) by one-step microwave-assisted method and characterized by transmission electron microscopy (TEM), power X-ray diffraction (XRD), nuclear magnetic resonance ({sup 13}CNMR), and Fourier transform infrared (FT-IR). The results showed that glycine was better than PEG200 or hexadecyltrimethyl ammonium bromide (CTAB) as the modification in reaction. The prepared G-CDs had the sizes about 10 nm, high fluorescent quantum yield (QY) up to 31%, and stability at biological system. Moreover, G-CDs had low cytotoxicity. Our results verified that amino group (or secondary amines) had a significant effect on the QY; one-step microwave-assisted method was simple, efficient and green. The further experiments about the interaction of G-CDs with human transferrin (hTf) were also detected. Data showed that there was a strong interaction between G-CDs and hTf, and one type of binding site between them. The quenching mode of fluorescence of hTf with G-CDs was static quenching process.

36 MATERIALS SCIENCE↗

Facile room temperature CTAB-assisted synthesis of mesoporous nano-cobalt ferrites for enhanced magnetic behaviour

Highlights: • Synthesis of mesoporous nano-cobalt ferrites are carried out CTAB medium. • Crystalline cobalt ferrite phase was formed below CMC of CTAB. • Bilayer arrangement of CTA-OH-Fe-Co growing units leads to inter-particle pores. • Enhanced magnetic properties (M{sub s} and H{sub c}) were obtained in synthesized cobalt ferrites. - Abstract: We report a facile, room temperature synthesis of nanostructured mesoporous cobalt ferrites using the cationic surfactant, cetyltrimethylammonium bromide (CTAB). The synthesis was carried out at various concentrations of CTAB ranging from its pre- to post-micellar concentrations. The pristine and calcined samples exhibit pure cobalt ferrite phase which are confirmed by XRD studies. The morphology of all uncalcined samples was quasi-spherical as shown by TEM images. Nitrogen adsorption – desorption study on pristine samples indicates the presence of mesopores in them. The magnetic properties of the uncalcined and calcined samples were studied by vibrating sample magnetometry. Coercivity and saturation magnetization were found to vary with the concentration of the CTAB employed. Also, the pristine samples were soft magnets, whereas the calcined samples tended towards exhibiting hard magnetism. We have proposed a mechanism to explain the mesoporosity of nanostructured ferrite based the role of CTAB in the present synthetic method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Technology for processing ammonium rhodanide of coking plants into high-purity ammonium thiocyanate and thiourea

The regularities of the reversible reaction of isomerization of ammonium thiocyanate (NH{sub 4}NCS) into thiourea (NH{sub 2}){sub 2}CS, and the reverse reaction, were analyzed. An ecologically clean and highly efficient method for the extraction, purification, separation, and production of isomers from the coal byproduct ammonium thiocyanate was developed based on the measured volatilities of NH{sub 4}NCS and (NH{sub 2}){sub 2}CS.

01 COAL, LIGNITE, AND PEAT↗

Hygroscopic Properties of CH3SO3Na, CH3SO3NH4, (CH3SO3)2Mg and (CH3SO3)2Ca Particles Studied by Micro-FTIR Spectroscopy

The hygroscopic behavior of CH3SO3Na, CH3SO3NH4, (CH3SO3)2Mg and (CH3SO3)2Ca particles as a function of relative humidity (RH) has been studied using microscopic Fourier transform infrared (micro-FTIR) spectroscopy. The approach used exposure of substrate deposited, ~1 μm dry-size particles to humidified nitrogen followed by micro-FTIR spectroscopy over a selected sample area. The results show that CH3SO3Na particles undergo characteristic phase transitions at deliquescence relative humidity (DRH) of 71% and efflorescence relative humidity (ERH) of ~40%. In contrast, CH3SO3NH4, (CH3SO3)2Mg and (CH3SO3)2Ca particles do not undergo phase transitions and exhibit continuous, reversible uptake and evaporation of water under the influence of changing RH. The extent of water uptake is quantified and presented as water-to-solute ratios (WSR) in particles as a function of RH. The WSR values are determined from the integrated absorbance of the water and the solute-specific bands in IR spectra recorded at different RH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic Studies of the Phase Transition in Ammonia Borane: Raman spectroscopy of single crystal NH3BH3 as a function of temperature from 88 to 330 K

Raman spectra of single crystal ammonia borane, NH3BH3, were recorded as a function of temperature from 77 to 300 K using Raman microscopy and a variable temperature stage. The orthorhombic to orientationally disordered tetragonal phase transition at 225 K was clearly evident from the decrease in the number of vibrational modes. However some of the modes in the orthorhombic phase appeared to merge 10 to 12 K below the phase transition perhaps suggesting the presence of an intermediate phase. Factor group analysis of vibrational spectra for both orthorhombic and tetragonal phase is provided. To our knowledge this is first reported vibrational spectra in the BH and NH stretching region of single crystal NH3BH3 in the orthorhombic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microscopic solvation of a lithium atom in water-ammonia mixed clusters: Solvent coordination and electron localization in presence of a counterion

The microsolvation structures and energetics of water-ammonia mixed clusters containing a lithium atom, i.e., Li(H{sub 2}O){sub n}(NH{sub 3}), n=1-5, are investigated by means of ab initio theoretical calculations. Several structural aspects such as the solvent coordination to the metal ion and binding motifs of the free valence electron of the metal are investigated. We also study the energetics aspects such as the dependence of vertical ionization energies on the cluster size, and all these structural and energetics aspects are compared to the corresponding results of previously studied anionic water-ammonia clusters without a metal ion. It is found that the Li-O and Li-N interactions play a very important role in stabilizing the lithium-water-ammonia clusters, and the presence of these metal ion-solvent interactions also affect the characteristics of electron solvation in these clusters. This is seen from the spatial distribution of the singly occupied molecular orbital (SOMO) which holds the ejected valence electron of the Li atom. For very small clusters, SOMO electron density is found to exist mainly at the vicinity of the Li atom, whereas for larger clusters, it is distributed outside the first solvation shell. The free dangling hydrogens of water and ammonia molecules are involved in capturing the SOMO electron density. In some of the conformers, OH(e)HO and OH(e)HN types of interactions are found to be present. The presence of the metal ion at the center of the cluster ensures that the ejected electron is solvated at a surface state only, whereas both surface and interiorlike states were found for the free electron in the corresponding anionic clusters without a metal ion. The vertical ionization energies of the present clusters are found to be higher than the vertical detachment energies of the corresponding anionic clusters which signify a relatively stronger binding of the free electron in the presence of the positive metal counterion. The shifts in different vibrational frequencies are also calculated for the larger clusters, and the results are discussed for some of the selective modes of water and ammonia molecules that are directly influenced by the location and hydrogen bonding state of these molecules in the clusters.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magnetically induced optical activity and dichroism of gadolinium oxide nanoparticle-based ferrofluids

The present work reports on magnetically induced optical activity (such as Faraday rotation and linear dichroism) of pristine and gamma-irradiated gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticle-based ferrofluids. The ferrofluids were produced by dispersing N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB)-coated {approx}9-nm-sized Gd{sub 2}O{sub 3} particles in a carrier fluid of ethanol. The ferrofluids were then irradiated with 1.25 MeV energetic gamma rays (dose: 868 Gy and 2.635 kGy). Irradiation-led formation of a number of point defects was revealed through high resolution electron microscopy. The interaction of light with the ionized point defects is believed to have caused substantial improvement in the magneto-optic response of irradiated magnetic fluids.

36 MATERIALS SCIENCE↗

First-Principles Calculation of Thermodynamic Stability of Acids and Bases under pH Environment: A Microscopic pH Theory

Despite being one of the most important thermodynamic variables, pH has yet to be incorporated into first-principles thermodynamics to calculate stability of acidic and basic solutes in aqueous solutions. By treating the solutes as defects in homogeneous liquids, we formulate a first-principles approach to calculate their formation energies under proton chemical potential, or pH, based on explicit molecular dynamics. The method draws analogy to first-principle calculations of defect formation energies under electron chemical potential, or Fermi energy, in semiconductors. From this, we propose a simple pictorial representation of the general theory of acid-base chemistry. By performing first-principles molecular dynamics of liquid water models with solutes, we apply the formulation to calculate formation energies of various neutral and charged solutes such as H{sup +}, OH{sup -}, NH{sub 3}, NH{sub 4}{sup +}, HCOOH, and HCOO{sup -} in water. The deduced auto-dissociation constant of water and the difference in the pKa values of NH{sub 3} and HCOOH show good agreement with known experimental values. Our first-principles approach can be further extended and applied to other bio- and electro-chemical molecules such as amino acids and redox reaction couples that could exist in aqueous environments to understand their thermodynamic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tapanuli Organoclay Addition Into Linear Low Density Polyethylene-Pineapple Fiber Composites

Linear low density polyethylene-Tapanuli organoclay-pineapple fiber composites were succesfully synthesized by a melt intercalation method. The clay was modified as an organoclay by a cation exchange reaction using hexadecyl trimethyl ammonium bromide (HDTMABr) surfactant. The X-ray diffraction results of the organoclay exhibited a higher basal spacing of 1.87 nm compared to the unmodified clay of 1.46 nm. The composite tensile strength was enhanced up to 46.4% with the 1 wt% organoclay addition. Both tensile and flexural moduli increased up to 150.6% and 43% with the 3 wt% organoclay addition to the composites. However, the flexural strength of the composites was not improved with the organoclay addition. The addition of organoclay has also decreased the heat deflection temperature of the composites.

36 MATERIALS SCIENCE↗

Measuring contact angle and meniscus shape with a reflected laser beam

Side-view imaging of the contact angle between an extended planar solid surface and a liquid is problematic. Even when aligning the view perfectly parallel to the contact line, focusing one point of the contact line is not possible. We describe a new measurement technique for determining contact angles with the reflection of a widened laser sheet on a moving contact line. We verified this new technique measuring the contact angle on a cylinder, rotating partially immersed in a liquid. A laser sheet is inclined under an angle φ to the unperturbed liquid surface and is reflected off the meniscus. Collected on a screen, the reflection image contains information to determine the contact angle. When dividing the laser sheet into an array of laser rays by placing a mesh into the beam path, the shape of the meniscus can be reconstructed from the reflection image. We verified the method by measuring the receding contact angle versus speed for aqueous cetyltrimethyl ammonium bromide solutions on a smooth hydrophobized as well as on a rough polystyrene surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Signature of quantum entanglement in NH{sub 4}CuPO{sub 4}·H{sub 2}O

Entangled solid state systems have gained a great deal of attention due to their fruitful applications in modern quantum technologies. Herein, detection of entanglement content from experimental magnetic susceptibility and specific heat data is reported for NH{sub 4}CuPO{sub 4}·H{sub 2}O in its solid state crystalline form. NH{sub 4}CuPO{sub 4}·H{sub 2}O is a prototype of Heisenberg spin 1/2 dimer system. Temperature dependent magnetic susceptibility and specific data are fitted to an isolated dimer model and the exchange coupling constant is determined. Field dependent magnetization isotherms taken at different temperatures are plotted in a three dimensional plot. Subsequently, entanglement is detected both from susceptibility and specific heat through two different entanglement measures; entanglement witness and entanglement of formation. The temperature evolution of entanglement is studied and the critical temperature is determined up to which entanglement exists. Temperature dependent nature of entanglement extracted from susceptibility and specific heat shows good consistency with each other. Moreover, the field dependent entanglement is also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unusual defect physics in CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cell absorber

Thin-film solar cells based on Methylammonium triiodideplumbate (CH{sub 3}NH{sub 3}PbI{sub 3}) halide perovskites have recently shown remarkable performance. First-principle calculations show that CH{sub 3}NH{sub 3}PbI{sub 3} has unusual defect physics: (i) Different from common p-type thin-film solar cell absorbers, it exhibits flexible conductivity from good p-type, intrinsic to good n-type depending on the growth conditions; (ii) Dominant intrinsic defects create only shallow levels, which partially explain the long electron-hole diffusion length and high open-circuit voltage in solar cell. The unusual defect properties can be attributed to the strong Pb lone-pair s orbital and I p orbital antibonding coupling and the high ionicity of CH{sub 3}NH{sub 3}PbI{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗