ARM: AOS: Tri-color Absorption Photometer
AOS: Tri-color Absorption Photometer
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
AOS: Tri-color Absorption Photometer
Auxiliary data for the AOS Single Particle Soot Photometer, extended range
AOS: Single Particle Soot Photometer, extended range, particle-by-particle
AOS: Single Particle Soot Photometer, extended range
Miniaturized Aerosol Observing System (AOS) Miniaturized Scanning Electrical Mobility Sizer
Miniaturized Aerosol Observing System (AOS): Optical Particle Counter
Miniaturized Aerosol Observing System (AOS): Optical Particle Counter
AOS: Oxides of Nitrogen Analyzer with Cavity Attenuated Phase Shift Technology
Results are reported for braod-band photometry of the BL Lac object AO 0235+164 carried out over the spectral range from 0.36 to 3.5 microns in December 1975 and in October and November 1976. It is found that the continuum of this object steepened at visible wavelengths between December 1975 and October 1976, but maintained a relatively constant slope in the near-IR despite a factor-of-ten decrease in flux from the maximum level. Visible-wavelength data are cited which appear to suggest that the steepening of the visible spectrum occurred in less than 300 days, while the near-IR level may have been nearly constant. It is shown that the observed change in the spectral shape of the visible-wavelength continuum cannot be explained in terms of a 'composite' model consisting of an unchanging galaxy and a varying nonthermal source with constant spectral index. Two other general classes of models are considered: intrinsic variability and extrinsic modulation.
Emission features in the optical spectrum of the highly variable BL Lac object AO 0235 + 164 have been detected which are identified as Mg II, forbidden Ne V, and forbidden O II at a redshift of 0.9399, consistent with a cosmological interpretation of the two absorption systems at z = 0.524 and z = 0.851. The spectrum also shows emission features associated with the z = 0.524 system at a projected separation of 20 kpc from the apparent central concentration of the material producing that absorption. This implies a highly extended and very luminous line-emitting region for the material at z = 0.524. A comparison of the new data with previous spectroscopic observations of the BL Lac object when it was faint suggests that the Mg II emission may be variable on a time scale of approximately 2 yr.
The purpose of experiment AO 187-1 was to expose high purity substrates of suitable cratering properties to obtain detailed crater statistics that may be converted into projectile masses and fluxes and to chemically characterize as many impactors as possible. The latter information would hopefully reveal distinct classes of natural and man-made particles in low-Earth orbit. It was found that crater that yield residues show that natural and man-made impactors may be differentiated and that diversity exists within each group. 'Chondritic' compositions dominate among natural particles, yet some craters contain unmelted fragments of minerals (Olivine and pyroxene).
AO Cas, a short-period, double-lined spectroscopic binary, is studied as part of a search for spectroscopic evidence of colliding stellar winds in binary systems of O-type stars. High S/N ratio spectra of the H-alpha and He I 6678-A line profiles are presented, and their orbital-phase-related variations are examined in order to derive the location and motions of high-density circumstellar gas in the system. These profile variations are compared with those observed in the UV stellar wind lines in IUE archival spectra. IUE spectra are also used to derive a system mass ratio by constructing cross-correlation functions of a single-lined phase spectrum with each of the other spectra. The resulting mass ratio is consistent with the rotational line broadening of the primary star, if the primary is rotating synchronously with the binary system. The best-fit models were found to have an inclination of 61.1 deg + or - 3.0 deg and have a primary which is close to filling its critical Roche lobe.
The UV photospheric lines of the short-period, double-lined O-star spectroscopic binary AO Cas are analyzed. Archival data from IUE (16 spectra uniformly distributed in orbital phase) were analyzed with a tomography algorithm to produce the separate spectra of the two stars in six spectral regions. The spectral classifications of the primary and secondary, O9.5 III and O8 V, respectively, were estimated through a comparison of UV line ratios with those in spectral standard stars. An intensity ratio of 0.5-0.7 (primary brighter) at 1600 A is compatible with the data.
Selected regions of IUE spectra of the binaries HD 47129 and AO Cassiopeiae are analyzed, and evidence for the effect of wind collision in both objects is found. A possible alternative explanation for the behavior of the spectral lines of the 'secondary' component in HD 47129 is suggested.
One of the objectives of the AO 138-7 experiment on board the LDEF was a total dose measurement with Thermo Luminescent Detectors (TLD 100). Two identical cases, both including 5 TLDs inside various aluminum shields, are exposed to the space environment in order to obtain the absorbed dose profile induced. Radiation fluence received during the total mission length was computed, taking into account the trapped particles (solar maximum and solar minimum periods) and the cosmic rays; due to the magnetospheric shielding, the solar proton fluences are negligible on the LDEF orbit. The total dose induced by these radiations inside a semi-infinite plane shield of Al are computed with radiation transport codes. TLD reading are performed after flight; due to the mission duration increase, a post-flight calibration was necessary in order to cover the range of the flight induced dose. The results obtained, similar (+ or - 30 pct.) in both cases, are compared with the dose profile computation. In practice, these LDEF results, with less than a factor 1.4 between measurements and forecasts, reinforce the validity of the computation methods and models used for the long term evaluation of space radiation intensity on low inclination Earth orbits.
The AO 138-5 experiment has been designed, via the French Cooperative Payload (FRECOPA) experiment with the aim to study the optical behavior of different diffraction gratings submitted to space vacuum long exposure and solar radiation. Samples were rules and holographic gratings, masters or replica, and some additional control mirrors with various coatings. The experiment was located on the B3, trailing edge of the Long Duration Exposure Facility (LDEF) and has been protected against atomic oxygen flux. The experienced thermal cycling has been evaluated from -23 C to 66 C during the flight, 34,000 orbits. The analysis has been focused on the triple point characterization including light efficiency, wavefront flatness quality and stray light level. Tests were conducted on control mirrors and gratings loaded but not exposed to cosmic dust or solar irradiations. They did not show any significant variations. Solar exposure has damaged the coating reflectivity in the ultraviolet region, the degradation is higher with the gratings, in terms of efficiency. However, wavefront flatness quality and stray light level tests revealed no additional changes.
One of the objectives of the AO 138-7 experiment on board the Long Duration Exposure Facility (LDEF) was a total dose measurement with Thermo Luminescent Detectors (TLD 100). Two identical packages, both of them including five TLD's inside various aluminum shields, are exposed to the space environment in order to obtain the absorbed dose profile. Radiation fluence received during the total mission length was computed, taking into account the trapped particles (AE8 and AP8 models during solar maximum and minimum periods) and the cosmic rays; due to the magnetospheric shielding the solar proton fluences are negligible on the LDEF orbit. The total dose induced by these radiations inside a semi infinite plane shield of aluminum are computed with the radiation transport codes available at DERTS. The dose profile obtained is in good agreement with the evaluation by E.V. Benton. TLD readings are performed after flight; due to the mission duration increase a post flight calibration was necessary in order to cover the range of the in flight induced dose. The results obtained, similar (plus or minus 30 percent) for both packages, are compared with the dose profile computation. For thick shields it seems that the measurements exceed the forecast (about 40 percent). That can be due to a cosmic ray and trapped proton contributions coming from the backside (assumed as perfectly shielded by the LDEF structure in the computation), or to an underestimate of the proton or cosmic ray fluences. A fine structural shielding analysis should be necessary in order to determine the origin of this slight discrepancy between forecast and in flight measurements. For the less shielded dosimeters, mainly exposed to the trapped electron flux, a slight overestimation of the dose (less than 40 percent) appears. Due to the dispersion of the TLD's response, this cannot be confirmed. In practice these results obtained on board LDEF, with less than a factor 1.4 between measurements and forecast, reinforce the validity of the computation methods and models used for the long term evaluation of the radiation levels (flux and dose) encountered in space on low inclination and altitude Earth orbits.
A complement of EUV optical components, including mirrors and thin film filters, was flown as part of the Long Duration Exposure Facility (LDEF) AO 138-3. The most original amongst these components were multilayered interference reflectors for the 10-40 nm wavelength range. Very moderate degradation was observed for those components which were exposed to the sun. The degradation is compatible with the deposition of a few nanometers of absorbing material on the surface of the samples.