Atmospheric Corrosion Testing Under Realistic Diurnal Conditions for Heated Surfaces.
Abstract not provided.
Bryan, Charles R.↗
SEARCH · Search NASA
Results for “ATMOSPHERIC HEATING”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Role of atmospheric resonance and land–atmosphere feedbacks as a precursor to the June 2021 Pacific Northwest Heat Dome event
We demonstrate an indirect, rather than direct, role of quasi-resonant amplification of planetary waves in a summer weather extreme. We find that there was an interplay between a persistent, amplified large-scale atmospheric circulation state and soil moisture feedbacks as a precursor for the June 2021 Pacific Northwest “Heat Dome” event. An extended resonant planetary wave configuration prior to the event created an antecedent soil moisture deficit that amplified lower atmospheric warming through strong nonlinear soil moisture feedbacks, favoring this unprecedented heat event.
54 ENVIRONMENTAL SCIENCES↗
Contrasting Effects of Urban Land Cover Change and Anthropogenic Heat on Summer Precipitation Over the Yangtze River Delta of China: Analyses From an Atmospheric Moisture Budget Perspective
Both urban land cover (ULC) change and anthropogenic heat (AH) emission are important causes of urban heat island, but their relative contributions to the changes in urban precipitation and the related mechanism remain unclear. Based on numerical simulations utilizing the latest realistic urban fraction and AH data over the Yangtze River Delta urban agglomeration, we found that ULC and AH resulted in nearly opposite effects on precipitation. Various dynamical and thermodynamic processes were involved according to the atmospheric moisture budget analyses. AH increased precipitation particularly during afternoon, and the increases were stronger during heavy precipitation events because of the enhanced moisture convergence effect together with the release of moisture storage previously accumulated in the atmosphere. Differently, ULC reduced mean precipitation mainly due to suppressed evaporation. During weak precipitation events, the suppressed evaporation was largely balanced by the intensified moisture convergence, but during heavy events, ULC caused more pronounced precipitation reduction because the moisture convergence response disappeared and failed to offset the evaporation effect. Here, the relative contributions of different dynamical and thermodynamic processes such as those related to circulation, moisture gradient, and background moisture availability to the temporal variation in the total moisture convergence were further quantified. Overall, our results help better understand the relative roles of different aspects of urbanization on precipitation, and suggest that compared to ULC, reduction in AH emission that is tightly related to the energy consumption structure could be more efficient for mitigating the risk of extreme precipitation.
54 ENVIRONMENTAL SCIENCES↗
CROCUS Low Cost All-in-One Weather Station AMB-001 Data Argonne National Laboratory Prairie Site
The Ambient Weather WS-2902D (AMB) is a low cost weather station that has become very useful for filling data gaps in harder to deploy locations. These low cost weather stations collect 13 second data, which is averaged to a five minute data output available to users through an API key. The data files contain measurements for precipitation, temperature, wind chill/heat index, relative humidity, dew point, UV index, solar radiation, wind speed, wind direction, wind gust, and with an external particulate matter 2.5 (PM 2.5) sensor. Having all of these measurements in one condense system allows for fast deploying and dense network capabilities. Three of the AMB weather stations were deployed at the Argonne Testbed for Multiscale Observational Science (ATMOS), a 20-acre prairie site at Argonne National Laboratory in Lemont, Illinois. The instruments are denoted by their three digit identifier (CMS-AMB-xxx) format. The data is presented as daily NetCDF (.nc) files, each containing approximately 24 hours of observations. Files follow the naming convention of: the project (CROCUS), location (atmos), instrument name (CMS-AMB-001), data level (raw, a1), and date (year, month, day). The NetCDF format can be accessed using common scientific software such as Python using xarray, netCDF4 or ACT-DOE.
54 ENVIRONMENTAL SCIENCES↗
CROCUS Low Cost All-in-One Weather Station AMB-004 Data Argonne National Laboratory Prairie Site
The Ambient Weather WS-2902D (AMB) is a low cost weather station that has become very useful for filling data gaps in harder to deploy locations. These low cost weather stations collect 13 second data, which is averaged to a five minute data output available to users through an Application Programming Interface (API) key. The data files contain measurements for precipitation, temperature, wind chill/heat index, relative humidity, dew point, UV index, solar radiation, wind speed, wind direction, wind gust, and with an external particulate matter 2.5 (PM 2.5) sensor. Having all of these measurements in one condense system allows for fast deploying and dense network capabilities. Three of the AMB weather stations were deployed at the Argonne Testbed for Multiscale Observational Science (ATMOS), a 20-acre prairie site at Argonne National Laboratory in Lemont, Illinois. The instruments are denoted by their three digit identifier (CMS-AMB-xxx) format. The data is presented as daily NetCDF (.nc) files, each containing approximately 24 hours of observations. Files follow the naming convention of: the project (CROCUS), location (atmos), instrument name (CMS-AMB-004), data level (raw, a1), and date (year, month, day). The NetCDF format can be accessed using common scientific software such as Python using xarray, netCDF4 or ACT-DOE.
EARTH SCIENCE > ATMOSPHERE > AEROSOLS > PARTICULAT↗
The Impact of Nonzenith Elevation Angles on Ground-Based Infrared Thermodynamic Retrievals
Observing thermodynamic profiles within the planetary boundary layer is essential to understanding and predicting atmospheric phenomena because of the significant exchange of sensible and latent heat between the land and atmosphere within that layer. The Atmospheric Emitted Radiance Interferometer (AERI) is a ground-based infrared spectrometer used to obtain the vertical profiles of temperature and water vapor mixing ratio. Most AERIs are only capable of zenith views, although the Marine AERI (M-AERI) has a design that allows it to view various elevation angles. In this study, we quantify the improvement in the information content and accuracy of the retrieved profiles when nonzenith angles are included, as is common with microwave radiometer profilers. The impacts of the additional scan angles are quantified through both a synthetic study and with M-AERI observations from the ARM Cloud Aerosol Precipitation Experiment (ACAPEX) campaign. Furthermore, the simulation study shows that low elevation angles contain more information content for temperature whereas high elevation angles have more information content for water vapor. Outside of very humid environments, the addition of low elevation angles also results in lower root-mean-square errors when compared with high angles for both temperature and water vapor mixing ratio, although this is primarily a result of averaging multiple observations together to reduce instrument noise. Real-world results from the ACAPEX dataset indicate similar results as were found for the simulation study, although not all predicted benefits are realized because of the small sample size and observational uncertainties.
54 ENVIRONMENTAL SCIENCES↗
Tungsten Electrodeposition
Tungsten is a refractory metal with a very high melting point (3422 °C), hardness (7.5 on Mohs hardness scale), and chemical resistance, making it useful in applications with extreme conditions. Electrodeposition is an attractive technique for coating metals because of its scalability and applicability to objects of intricate shape, though tungsten electrodeposition remains difficult. Some multi-step methods first coat either a sacrificial metal such as zinc or a layer of tungsten oxide which is then converted to metallic tungsten with WCl6 immersion (i.e. a redox replacement reaction) or heating in a reducing atmosphere, respectively. Single step deposition would save time and money, making it more viable on an industrial scale. Most reports detailing direct tungsten electrodeposition use molten salts which are energy intensive, hazardous, and difficult to maintain. Few reports have demonstrated single-step, low temperature electrodeposition deposition of tungsten in atmosphere. An article from 1931 reports successful metal tungsten electrodeposition from a highly basic sodium tungstate solution, though the authors reported very low current efficiency (<1%) and required heating to 80+ °C to obtain metallic films. This report outlines our attempts to electroplate tungsten from various solutions on different electrode materials, none of which succeeded. Our intent is to guide future researchers at Los Alamos National Laboratory that would attempt tungsten electrodeposition.
36 MATERIALS SCIENCE↗
Accelerating Radiation Computations for Dynamical Models With Targeted Machine Learning and Code Optimization
Abstract Atmospheric radiation is the main driver of weather and climate, yet due to a complicated absorption spectrum, the precise treatment of radiative transfer in numerical weather and climate models is computationally unfeasible. Radiation parameterizations need to maximize computational efficiency as well as accuracy, and for predicting the future climate many greenhouse gases need to be included. In this work, neural networks (NNs) were developed to replace the gas optics computations in a modern radiation scheme (RTE+RRTMGP) by using carefully constructed models and training data. The NNs, implemented in Fortran and utilizing BLAS for batched inference, are faster by a factor of 1–6, depending on the software and hardware platforms. We combined the accelerated gas optics with a refactored radiative transfer solver, resulting in clear‐sky longwave (shortwave) fluxes being 3.5 (1.8) faster to compute on an Intel platform. The accuracy, evaluated with benchmark line‐by‐line computations across a large range of atmospheric conditions, is very similar to the original scheme with errors in heating rates and top‐of‐atmosphere radiative forcings typically below 0.1 K day −1 and 0.5 W m −2 , respectively. These results show that targeted machine learning, code restructuring techniques, and the use of numerical libraries can yield material gains in efficiency while retaining accuracy.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quasi-Steady Simulation of Glaze Ice Accretion and Heat Transfer in the Supercooled Large Droplet Regime in Atmospheric Turbulent Air Flow
Abstract To avoid the use of a computationally intensive full unsteady simulation while providing an accurate solution, a quasi-steady simulation has been performed to study glaze and mixed ice accretion in the supercooled large droplet (SLD) regime in turbulent flow of atmospheric air. We have attempted to find the minimum time-step necessary to adequately simulate the icing process on an airfoil surface. Based on node displacement, a mesh morphing scheme has been adopted in the computations to account for the moving boundaries that are caused by the continuous ice buildup. We have modeled ice accretion on an airfoil surface for a time period of 232 s using several time steps. At each time-step we solved the steady-state conservation equations for the air and droplet phases and then used the results as initial conditions for the next time position. The magnitude of the time-step ranged from a least accurate two-shot simulation (where the time-step is 116 s) to a most accurate 2320-shot simulation (where the time-step is 0.1 s). In-between these two extreme time steps, we have performed a three-shot simulation (where the time-step is 77.33 s), a four-shot simulation (where the time-step is 58 s), a six-shot simulation (where the time-step is 38.67 s), a 46-shot simulation (where the time-step is 5 s), and a 232-shot simulation (where the time-step is 1 s). We have done so to find out the degree of accuracy (or inaccuracy) of the multishot simulation approach and to find out the appropriate time-step needed for a successful and valid quasi-steady simulation. A valid quasi-steady simulation needs to use a time-step that is small enough to reproduce the full time-dependent solution within a very small error band. We have found that both the 1 s and the 0.1 s time steps produce virtually identical results. This is the primary litmus test that proves the validity of the quasi-steady-state assumption. The results adopted in this paper are thus all based on the more conservative 0.1 s time-step. In the process of performing the simulations, remeshing was required in order to maintain the grid density in zones of high curvature to be able to capture the full physics in those zones. After successfully modeling glaze ice accretion over the airfoil surface using the 0.1 s quasi-steady simulation approach, the effects of supercooled large droplets (SLDs) impacting the surface have been examined and presented in terms of the variation of the local collection efficiency, the water film thickness, and the heat transfer rate. Examination of the variation of the angle that the ice horn makes with the airfoil chord line demonstrated a 20% improvement in angle prediction when the time-step is reduced from 116 s to 0.1 s. The analysis also reveals a 12% or 8.5% increase in the maximum collection efficiency, βmax, depending on whether the value of the liquid water content (LWC) has been doubled from 0.5 g/m3 to 1 g/m3, or the value of the freestream velocity has been doubled from 75 m/s to 150 m/s, respectively. Because of the need to monitor the local collection efficiency and convective heat fluxes at each shot (regardless of the number of shots employed), the approach adopted here was found to be effective in successively and successfully reproducing the curvature of the glaze ice horn.
Engineering↗
The winter central Arctic surface energy budget: A model evaluation using observations from the MOSAiC campaign
This study evaluates the simulation of wintertime (15 October, 2019, to 15 March, 2020) statistics of the central Arctic near-surface atmosphere and surface energy budget observed during the MOSAiC campaign with short-term forecasts from 7 state-of-the-art operational and experimental forecast systems. Five of these systems are fully coupled ocean-sea ice-atmosphere models. Forecast systems need to simultaneously simulate the impact of radiative effects, turbulence, and precipitation processes on the surface energy budget and near-surface atmospheric conditions in order to produce useful forecasts of the Arctic system. This study focuses on processes unique to the Arctic, such as, the representation of liquid-bearing clouds at cold temperatures and the representation of a persistent stable boundary layer. It is found that contemporary models still struggle to maintain liquid water in clouds at cold temperatures. Given the simple balance between net longwave radiation, sensible heat flux, and conductive ground flux in the wintertime Arctic surface energy balance, a bias in one of these components manifests as a compensating bias in other terms. This study highlights the different manifestations of model bias and the potential implications on other terms. Three general types of challenges are found within the models evaluated: representing the radiative impact of clouds, representing the interaction of atmospheric heat fluxes with sub-surface fluxes (i.e., snow and ice properties), and representing the relationship between stability and turbulent heat fluxes.
54 ENVIRONMENTAL SCIENCES↗
Estimating turbulent energy flux vertical profiles from uncrewed aircraft system measurements: exemplary results for the MOSAiC campaign
This study analyzes turbulent energy fluxes in the Arctic atmospheric boundary layer (ABL) using measurements with a small uncrewed aircraft system (sUAS). Turbulent fluxes constitute a major part of the atmospheric energy budget and influence the surface heat balance by distributing energy vertically in the atmosphere. However, only few in situ measurements of the vertical profile of turbulent fluxes in the Arctic ABL exist. The study presents a method to derive turbulent heat fluxes from DataHawk2 sUAS turbulence measurements, based on the flux gradient method with a parameterization of the turbulent exchange coefficient. This parameterization is derived from high-resolution horizontal wind speed measurements in combination with formulations for the turbulent Prandtl number and anisotropy depending on stability. Measurements were taken during the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition in the Arctic sea ice during the melt season of 2020. For three example cases from this campaign, vertical profiles of turbulence parameters and turbulent heat fluxes are presented and compared to balloon-borne, radar, and near-surface measurements. The combination of all measurements draws a consistent picture of ABL conditions and demonstrates the unique potential of the presented method for studying turbulent exchange processes in the vertical ABL profile with sUAS measurements.
54 ENVIRONMENTAL SCIENCES↗
Application of Atmospheric Gases and Particulate Matter to the Assessment of Urban Heat Island
Background: Urban heat island (UHI), where built areas are warmer compared to non-urban regions, increases human related diseases and mortality. A key challenge in UHI analysis is the designation of sites as urban or suburban/rural; however, the growing complexity of green spaces in urban areas and the predominance of the transportation sector in nonurban areas creates a dilemma for distinct delineation. Objectives: This study aims to utilize the variability of atmospheric components such as particulate matter (PM), inorganic gases, and volatile organic compounds (VOCs) as direct tracers of the degree of urbanization for ground-based measurements to fully comprehend UHI in convoluted regions with indistinct delineation of urban and nonurban environments. Methods: Atmospheric gases and aerosols were used as direct tracers of urbanization for UHI analysis. Inorganic gases and particulate matter were monitored in two sites in a southeastern US city with varying degrees of urbanization. VOCs were analyzed using a proton transfer reaction time-of-flight mass spectrometer. Results: The more-urbanized site exhibited warmer night conditions and elevated total oxidant levels, leading to the formation of nanometer-sized particles. Machine learning analysis revealed similar atmospheric pollutant profiles for both sites, suggesting comparable sources and variability. Biogenic VOCs were enhanced at the less-urbanized site; however, levels of anthropogenic aromatic VOCs were comparable for both sites. A comprehensive mass spectra analysis revealed distinct molecular backbones per site that further affirmed the applicability of VOCs as indicators of urbanization. Conclusion: This study concludes that VOCs provide more direct and accurate information than typical inorganic gases and PM parameters for characterizing the degree of urbanization. Further exploration of VOCs can enhance our understanding of UHI dynamics and its interaction with vegetation in urban green spaces.
Air quality sensor↗
Sea surface warming and ocean-to-atmosphere feedback driven by large-scale offshore wind farms under seasonally stratified conditions
Offshore wind farms may induce changes in the upper ocean and near-surface atmosphere through coupled ocean-atmosphere feedbacks. Yet, the role of air-sea interactions mediated by offshore wind farms remains poorly understood. Using fully coupled ocean-atmosphere-wave model simulations for seasonally stratified conditions along the US East Coast, we show that simulated cumulative reductions in wind stress due to large-scale wind farm clusters lead to sea surface warming of 0.3° to 0.4°C and a shallower mixed layer. This warming drives upward heat fluxes, destabilizing the atmospheric boundary layer and enhancing wind stress, which partially offsets wake-induced wind deficits. These wake-ocean interactions influence near-surface meteorology and air-sea fluxes, suggesting that a coupled modeling approach may be necessary for assessing potential oceanographic impacts of offshore wind developments. However, ocean coupling exerts limited influence on winds at turbine-relevant heights or within downstream wakes, resulting in minimal impact on long-term energy. These findings suggest that models without ocean coupling may be adequate for wind energy applications.
17 WIND ENERGY↗
Direct Air Capture Using Aqueous Amino Acid Solvents in a Crossflow Absorber
Carbon dioxide (CO 2 ) is the most abundant of all greenhouse gases (GHGs). CO 2 levels in the atmosphere are 50% higher than in the preindustrial era, trapping heat. CO 2 removal from the atmosphere by direct air capture (DAC) is needed to achieve the internationally agreed global temperature goals. The most common CO 2 capture technology is absorption by aminebased solvents in packed columns. Amino acid solutions have recently gained attention due to their advantages over traditional amine solvents. To be implemented effectively, DAC industrial processes need to handle large airflow rates in separation absorbers. The large air and solvent flow rates preclude the use of countercurrent columns due to high-pressure drops and the occurrence of flooding. Crossflow air−liquid absorbers are used to handle large air and liquid volumes due to their lower-pressure drop. The objective of this work is to study the influence of crossflow absorber geometric parameters and operating conditions on product formation and process efficiency. An already derived theoretical model for countercurrent absorbers has been modified to simulate the operation of a crossflow DAC absorber. The predictive model was implemented into a computer code that was used to study the efficiency of the processes as geometric equipment dimensions and operating parameters vary. Practical suggestions are made to design more efficient DAC processes.
Absorption↗
Flux Seasonality Metrics Database: A companion dataset for FLUXNET annual product
This dataset include standardized phenological transition dates, and derived season lengths of active, dormant and transition seasons of ecosystem carbon and energy fluxes, as reported in FLUXNET. Such metrics are unique in that they characterize the seasonal dynamics of these fluxes in their own terms rather than in reference to traditional phenology indicators that mostly relate to vegetation structural characteristics. The Flux Seasonality Metrics Database (FSMD) generated 17 standardized seasonality metrics for 4 different fluxes including gross primary productivity (GPP), ecosystem respiration (RE), latent heat (LE) and sensible heat (H) reported in FLUXNET2015 Dataset for about 200 sites and 1500 site-years of data globally. Each metric is reported as an estimate and a confidence interval, which is a function of data coverage and flux variability. We anticipate that the FSMD will facilitate new model validation exercises, and stimulate new research in global change and Earth science disciplines where land-atmosphere exchange dynamics play a central role.
54 ENVIRONMENTAL SCIENCES↗
Reducing uncertainty of polar to midlatitude linkages using DOE’s E3SM in a coordinated model-experiment setting
This project brought DOE’s climate modeling effort with the Energy Exascale Earth System Model into the Polar Amplification Model Intercomparison Project (PAMIP), which is part of the sixth and latest Coupled Model Intercomparison Project, CMIP6. PAMIP examines the causes and consequences of polar amplification, when external forcing results in a larger temperature increase in high latitudes than the global average, in a coordinated set of model experiments with a common modeling protocol. Our teams from UC Irvine and the University of Toronto have designed, carried out, analyzed, and disseminated PAMIP output from the Energy Exascale Earth System Model (E3SM) and the Community Earth System Model (CESM). PAMIP’s ongoing stream of significant new results have advanced progress in the community’s understanding and led to new outstanding research questions that have motivated further work. PAMIP has led to improved consensus on the atmospheric response to sea ice loss. The important finding is that for a similar sea ice anomaly forcing, the simulated atmospheric response in the troposphere is remarkably consistent among the 16 models’ runs analyzed. The zonal-mean tropospheric response consists of a very robust equatorward shift of the westerly flow in mid-latitudes. However, while the multi-model mean response is robust, it has a weak amplitude relative to internal variability. We identified a weakness in the models (including E3SM) in terms of their response to sea-ice forcing that is related to eddy forcing (or nonlinear dynamical effects) at mid- to high latitudes. In fact, E3SM is an outlier in terms of the models participating, and in that sense, it turned out to be a vital participant model. We found that reductions in energy transport due sea-ice loss and involving dry air only are compensated by increases in moist energy transport from warmer sea surface temperature in midlatitudes. This leads to a large spread in energy transport into the Arctic and is a potential source of spread in Arctic amplification. We identified an important role that climate modes, including tropical modes of variability (El Nino and the Southern Oscillation (ENSO); the Quasi-biennial Oscillation (QBO)) play in the response to sea-ice anomalies, including in ocean coupled experiments. Similarly, we identified and quantified the contribution of sea-ice thickness to the atmospheric response compared to the response to sea-ice extent only. We found that it is important to run large ensembles and even with an ensemble size of 100 simulations the response is largely influenced by internal variability. We demonstrated convincingly that Ural blocking, not sea-ice loss, provides the weakening of the stratospheric polar vortex in fall/early winter and a negative phase of the North Atlantic Oscillation that can last for up to two months. However, sea-ice anomalies can influence the background flow so that the response to Ural blocking is more persistent under low sea-ice conditions in the Barents/Kara Sea than high sea ice Atmospheric model hierarchies that progressively add individual processes have a long history in providing dynamical insight for modeling the atmosphere. Similarly, coupled model hierarchies that progressively add individual ocean processes can provide insights into the workings of the coupled climate system, however such hierarchies have not been available except for a non-dynamical slab ocean model. Because of the missing processes, surface flux corrections must be added to produce a target climate. In this project, we managed to overcome this problem and develop a globally coupled ocean model hierarchy in CESM that can turn on and off the processes of mixed-layer entrainment and Ekman flow. We used the hierarchy to study the impact of Arctic sea-ice loss on the climate system. We find that the effect of mixed-layer entrainment on ocean heat uptake influences the atmospheric circulation by shifting the latitudinal positions of the mid-latitude westerly jet and the Intertropical Convergence Zone (ITCZ). In quadrupled CO 2 experiments, we studied how air-sea coupling affects the response of tropical rainfall under global warming. In order to identify the importance of individual ocean processes, we used the hierarchy of ocean models to separate the effects of seasonal mixed-layer entrainment, wind-driven Ekman flows, and frictional flows. We showed that including Ekman and frictional flows allows our simulation to produce the Pacific Ocean's enhanced equatorial warming pattern and equatorward ITCZ contraction noted in previous climate simulations. We also showed that the frictional flow, which has yet to receive much attention, is as important as the Ekman flow in generating equatorial heat convergence.
54 ENVIRONMENTAL SCIENCES↗
A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2
A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.
09 BIOMASS FUELS↗
Behavior of an air-cooled thermosiphon during a non-air gas ingress event
Here, this study investigates the transient response of an air-cooled thermosiphon subjected to a sudden non-air gas ingress event. Results presented are from experimental testing conducted on a large-scale thermal hydraulic facility that examines heat removal performance of the Reactor Cavity Cooling System (RCCS) concept, a passive safety system for advanced nuclear reactors. Relying on buoyancy driven natural circulation flow, these systems feature a series of riser standpipes and coupled chimney network that provide a pathway for heat rejection to the atmosphere. In this work, the facility was modified to allow a transition of the draft intake from normal ambient air, to draft intake from an open-top volume containing high purity argon. Testing began by establishing normal operation and allowing the facility to reach steady-state thermal hydraulic flow conditions with natural air draft. The transitioned sequence was then initiated which simultaneously changed the inlet boundary from open air to a pathway from the quiescent argon volume. This event caused 1,200 cu-feet of the heavy gas, twice the internal volume of total facility flow path, to be drawn into the inlet plenum and ingress into the heated riser standpipes. With the upper chimney network still containing residual air, there was insufficient density difference to maintain buoyancy driven natural circulation. After a period of only 90 s past the ingress event, the facility experienced complete flow stagnation before entering an extended period of severely degraded system flow. Due to the cessation of bulk fluid movement and subsequent failure of its heat removal function, fluid and structural temperatures began to rise sharply. Re-circulation patterns developed within the multiple parallel riser standpipes, where hot gas near the outlets was observed to travel downward and re-enter the inlet of adjacent channels. After approximately 18-minutes, fluid temperatures and their associated density difference rose to a level sufficient to allow reestablishment of buoyancy driven system flow, and ultimately, recovery of facility operation to normal behavior.
42 ENGINEERING↗