Combined in situ X-ray absorption and diffuse reflectance infrared spectroscopy: An attractive tool for catalytic investigations
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Time-dependent and time-integrated absorption fractions are inferred from scattered-light measurements in room-temperature and cryogenic direct-drive-implosion experiments on OMEGA. The measurements agree reasonably well with hydrodynamic simulations that include nonlocal electron-heat transport. Discrepancies in the time-resolved scattered-light spectra between simulations and experiments remain for complex laser pulse shapes, indicating beam-to-beam energy transfer and commensurate coupling losses. Time-resolved scattered-light spectra near {omega}/2 and 3{omega}/2 as well as time-resolved hard-x-ray measurements indicate the presence of a strongly driven two-plasmon-decay (TPD) instability at high intensities that may influence the observed laser light absorption. Experiments indicate that energetic electron production due to the TPD instability can be mitigated with high-Z-doped plastic shells.
Abstract not provided
CH{sub 2}BrOO radicals were produced upon irradiation, with an excimer laser at 248 nm, of a flowing mixture of CH{sub 2}Br{sub 2} and O{sub 2}. A step-scan Fourier-transform spectrometer coupled with a multipass absorption cell was employed to record temporally resolved infrared (IR) absorption spectra of reaction intermediates. Transient absorption with origins at 1276.1, 1088.3, 961.0, and 884.9 cm{sup −1} are assigned to ν{sub 4} (CH{sub 2}-wagging), ν{sub 6} (O–O stretching), ν{sub 7} (CH{sub 2}-rocking mixed with C–O stretching), and ν{sub 8} (C–O stretching mixed with CH{sub 2}-rocking) modes of syn-CH{sub 2}BrOO, respectively. The assignments were made according to the expected photochemistry and a comparison of observed vibrational wavenumbers, relative IR intensities, and rotational contours with those predicted with the B3LYP/aug-cc-pVTZ method. The rotational contours of ν{sub 7} and ν{sub 8} indicate that hot bands involving the torsional (ν{sub 12}) mode are also present, with transitions 7{sub 0}{sup 1}12{sub v}{sup v} and 8{sub 0}{sup 1}12{sub v}{sup v}, v = 1–10. The most intense band (ν{sub 4}) of anti-CH{sub 2}BrOO near 1277 cm{sup −1} might have a small contribution to the observed spectra. Our work provides information for directly probing gaseous CH{sub 2}BrOO with IR spectroscopy, in either the atmosphere or laboratory experiments.
Not Available
Abstract not provided
Because of their long lifetimes, the {omega} and {phi} mesons are the ideal candidates for the study of possible modifications of the in-medium meson-nucleon interaction through their absorption inside the nucleus. During the E01-112 experiment at the Thomas Jefferson National Accelerator Facility, the mesons were photoproduced from {sup 2}H, C, Ti, Fe, and Pb targets. This Letter reports the first measurement of the ratio of nuclear transparencies for the e{sup +}e{sup -} channel. The ratios indicate larger in-medium widths compared with what have been reported in other reaction channels. The absorption of the {omega} meson is stronger than that reported by the CBELSA-TAPS experiment and cannot be explained by recent theoretical models.
Fine particulate matter (PM2.5; particulate matter with an aerodynamic diameter of 2.5μm and smaller) samples were collected at the University of Texas, San Antonio (UTSA) campus (29.57901, -98.62889) from May 15-30. An additional measurement at the UTSA site included aerosol absorption coefficient of PM1 (particulate matter with an aerodynamic diameter of 1.0μm and smaller) using a tricolor absorption photometer (TAP) (Brechtel Mfg. Inc., Hayward, California). The sampling site is approximately 15 miles northwest of downtown San Antonio and in close proximity to major highway 10 and is just south of a forested area. The setup of the sampler and TAP and collection of PM2.5 samples were completed by Baylor University’s graduate student, Subin Yoon. Three three-wavelength photoacoustic soot spectrometers (PASS-3s) were shipped to San Antonio for testing and possible data collection. R. Subramanian went to San Antonio to lead this effort with assistance from Yoon. Each instrument had a critical flaw that inhibited its use for this campaign. Two instruments had low laser power for each wavelength; in addition, there were power and overheating issues with the one instrument that was installed on a test basis. The third instrument had computer issues that impeded any testing. In short, these three instruments would require a major overhaul in terms of lasers and computer systems to be brought back to field capability. As a result, the filter-based optical measurements were added to the campaign as an alternate measurement that would provide mass absorption efficiency at a single wavelength, but no scattering measurement. The TAP instrument was successfully installed and collected data for San Antonio, but full use of the data would have required a co-located scattering measurement. This campaign was co-located with a Texas Commission on Environmental Quality (TCEQ) ozone field study. That TCEQ field study was a collaboration of the University of Houston (PI James Flynn), Rice University (Co-PI Robert Griffen), and Baylor University (Co-PIs Rebecca Sheesley and Sascha Usenko).
This paper re-examines the impact of atmospheric absorption bands on series-connected multijunction cell design, motivated by the numerous local efficiency maxima that appear as the number of junctions is increased. Some of the local maxima are related to the bottom subcell bandgap and are already well understood: As the bottom subcell bandgap is varied, a local efficiency maximum is produced wherever the bottom cell bandgap crosses an atmospheric absorption band. The optimal cell designs at these local maxima are generally current matched, such that all subcells have nearly the same short-circuit current. We systematically describe additional local maxima that occur wherever an upper subcell bandgap encounters an atmospheric absorption band. Moreover, these local maxima are not current matched and become more prevalent as the number of junctions increases, complicating the solution space for five-junction and six-junction designs. A systematic framework for describing this complexity is developed, and implications for numerical convergence are discussed.
A novel control strategy for vapor absorption systems with experimental validation is presented. Statistical methods are used to integrate a detailed thermodynamic model and system-specific characteristics into a model based control algorithm. This allows for continuously optimized operation as well as fast response to variations in operating conditions. Autonomous controller performance was tested experimentally for response to changes in heat sink and evaporator temperatures. Continuous turndown with fast response to capacity demand changes, in contrast to suboptimal on/off control, was demonstrated. The thermal compressor concept was employed to develop the variable speed thermal compressor module, with aspects specific to absorption heat pumps, also facilitating cross-applicability of vapor compression system control strategies. Our results of this study enable further development and optimization of absorption systems for a wide range of applications.
We present a unified framework for resonant absorption in periodic arrays of high index semiconductor nanowires that combines a leaky waveguide theory perspective and that of photonic crystals supporting Bloch modes, as array density transitions from sparse to dense. Full dispersion relations are calculated for each mode at varying illumination angles using the eigenvalue equation for leaky waveguide modes of an infinite dielectric cylinder. The dispersion relations along with symmetry arguments explain the selectivity of mode excitation and spectral red-shifting of absorption for illumination parallel to the nanowire axis in comparison to perpendicular illumination. Analysis of photonic crystal band dispersion for varying array density illustrates that the modes responsible for resonant nanowire absorption emerge from the leaky waveguide modes.
For the first time a method has been developed for the extended X-ray absorption fine structure (EXAFS) data analyses of biological samples containing multiple oxidation states of chromium. In this study, the first shell coordination and interatomic distances based on the data analysis of known standards of potassium chromate (Cr(VI)) and chromium nitrate hexahydrate (Cr(III)) were investigated. The standards examined were mixtures of the following molar ratios of Cr(VI):Cr(III), 0:1, 0.25:0.75, 0.5:0.5, 0.75:0.25, and 1:0. It was determined from the calibration data that the fitting error associated with linear combination X-ray absorption near edge structure (LC-XANES) fittings was approximately {+-}10% of the total fitting. The peak height of the Cr(VI) pre-edge feature after normalization of the X-ray absorption (XAS) spectra was used to prepare a calibration curve. The EXAFS fittings of the standards were also investigated and fittings to lechuguilla biomass samples laden with different ratios of Cr(III) and Cr(VI) were performed as well. An excellent agreement between the XANES data and the data presented in the EXAFS spectra was observed. The EXFAS data also presented mean coordination numbers directly related to the ratios of the different chromium oxidation states in the sample. The chromium oxygen interactions had two different bond lengths at approximately 1.68 and 1.98 {angstrom} for the Cr(VI) and Cr(III) in the sample, respectively.
A molecular level understanding of the structural reorganization accompanying interfacial electron transfer is important for rational design of solar cells. Here we have applied XTA (X-ray transient absorption) spectroscopy to study transient structures in a heterogeneous interfacial system mimicking the charge separation process in dye-sensitized solar cell (DSSC) with Ru(dcbpy){sub 2}(NCS){sub 2} (RuN3) dye adsorbed to TiO{sub 2} nanoparticle surfaces. The results show that the average Ru-NCS bond length reduces by 0.06 {angstrom}, whereas the average Ru?N(dcbpy) bond length remains nearly unchanged after the electron injection. The differences in bond-order change and steric hindrance between two types of ligands are attributed to their structural response in the charge separation. This study extends the application of XTA into optically opaque hybrid interfacial systems relevant to the solar energy conversion.
This study demonstrates a measurement system for a non-degenerate two-photon absorption (NDTPA) spectrum. The NDTPA light sources are a white light super continuum beam (WLSC, 500 ∼ 720 nm) and a fundamental beam (798 nm) from a Ti:Sapphire laser. A reliable broadband NDTPA spectrum is acquired in a single-shot detection procedure using a 128-channel lock-in amplifier. The NDTPA spectra for several common laser dyes are measured. Two photon absorption cross section enhancements are found in the experiment and validated by theoretical calculation for all of the chromophores.
Despite fundamental importance, the experimental characterization of the hydrogen bond network, particularly in multicomponent protic solutions, remains a challenge. Although recent work has experimentally validated that the oxygen K-edge X-ray ab- sorption spectra is sensitive to local hydrogen bond patterns in pure water and aqueous alcohol solutions, the generality of this observation is unknown - as is the sensitivity to the electronic structure of the alcohol cosolvent. In this work, we investigate the electronic structure of water solvated alcohol model geometries using energy specic time-dependent density functional theory to calculate oxygen K-edge X-ray excitations. We nd that the geometry of dangling hydrogen bonds in pure water is the main con- tributor to the pre-edge feature seen in the X-ray absorption spectra, agreeing with previous experimental and theoretical work. We then extend this result to solvated alcohol systems and observe a similar phenomenon, yet importantly, the increase of electron donation from alkyl chains to the alcohol OH group directly correlates to the strength of the core excitation on the dangling hydrogen bond model geometry. This trend arises from a stronger transition dipole moment due to electron localization on the OH group.
Explore the source record for details and available documents.