Search NASA⌕ Search

SEARCH · Search NASA

Results for “Adapted Grids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Application of a self-adaptive grid method to complex flows

A directional-split, modular, user-friendly grid point distribution code is applied to several test problems. The code is self-adaptive in the sense that grid point spacing is determined by user-specified constants denoting maximum and minimum grid spacings and constants relating the relative influence of smoothness and orthogonality. Estimates of truncation error, in terms of flow-field gradients and/or geometric features, are used to determine the point distribution. Points are redistributed along grid lines in a specified direction in an elliptic manner over a user-specified subdomain, while orthogonality and smoothness are controlled in a parabolic (marching) manner in the remaining directions. Multidirectional adaption is achieved by sequential application of the method in each coordinate direction. The flow-field solution is redistributed onto the newly distributed grid points after each unidirectional adaption by a simple one-dimensional interpolation scheme. For time-accurate schemes such interpolation is not necessary and time-dependent metrics are carried in the fluid dynamic equations to account for grid movement.

Deiwert, G. S.↗
NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

This report describes a numerical method for generating 3-D grids for general configurations. The basic method involves the solution of a set of quasi-linear elliptic partial differential equations via pointwise relaxation with a local relaxation factor. It allows specification of the grid spacing off the boundary surfaces and the grid orthogonality at the boundary surfaces. It includes adaptive mechanisms to improve smoothness, orthogonality, and flow resolution in the grid interior.

Chen, S. C.↗
NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

This report describes a numerical method for generating 3-D grids for general configurations. The basic method involves the solution of a set of quasi-linear elliptic partial differential equations via pointwise relaxation with a local relaxation factor. It allows specification of the grid spacing off the boundary surfaces and the grid orthogonality at the boundary surfaces. It includes adaptive mechanisms to improve smoothness, orthogonality, and flow resolution in the grid interior.

Chen, S. C.↗
NASA NTRS1996

Unstructured Adaptive Grid Computations on an Array of SMPs

Dynamic load balancing is necessary for parallel adaptive methods to solve unsteady CFD problems on unstructured grids. We have presented such a dynamic load balancing framework called JOVE, in this paper. Results on a four-POWERnode POWER CHALLENGEarray demonstrated that load balancing gives significant performance improvements over no load balancing for such adaptive computations. The parallel speedup of JOVE, implemented using MPI on the POWER CHALLENCEarray, was significant, being as high as 31 for 32 processors. An implementation of JOVE that exploits 'an array of SMPS' architecture was also studied; this hybrid JOVE outperformed flat JOVE by up to 28% on the meshes and adaption models tested. With large, realistic meshes and actual flow-solver and adaption phases incorporated into JOVE, hybrid JOVE can be expected to yield significant advantage over flat JOVE, especially as the number of processors is increased, thus demonstrating the scalability of an array of SMPs architecture.

Biswas, Rupak↗
NASA NTRS1983

Adaptive grid methods for partial differential equations

A number of techniques for constructing adaptive mesh generators for use in solving partial differential equations are reviewed in this paper. Techniques reviewed include methods based on steady grid generation schemes and those which are explicitly designed to determine grid speeds in a time-dependent or space-marching problem. Results for candidate methods are included and suggestions for areas of future research are suggested.

Anderson, D. A.↗
NASA NTRS1996

Impact of Load Balancing on Unstructured Adaptive Grid Computations for Distributed-Memory Multiprocessors

The computational requirements for an adaptive solution of unsteady problems change as the simulation progresses. This causes workload imbalance among processors on a parallel machine which, in turn, requires significant data movement at runtime. We present a new dynamic load-balancing framework, called JOVE, that balances the workload across all processors with a global view. Whenever the computational mesh is adapted, JOVE is activated to eliminate the load imbalance. JOVE has been implemented on an IBM SP2 distributed-memory machine in MPI for portability. Experimental results for two model meshes demonstrate that mesh adaption with load balancing gives more than a sixfold improvement over one without load balancing. We also show that JOVE gives a 24-fold speedup on 64 processors compared to sequential execution.

Biswas, Rupak↗
NASA NTRS1996

Impact of Load Balancing on Unstructured Adaptive Grid Computations for Distributed-Memory Multiprocessors

The computational requirements for an adaptive solution of unsteady problems change as the simulation progresses. This causes workload imbalance among processors on a parallel machine which, in turn, requires significant data movement at runtime. We present a new dynamic load-balancing framework, called JOVE, that balances the workload across all processors with a global view. Whenever the computational mesh is adapted, JOVE is activated to eliminate the load imbalance. JOVE has been implemented on an IBM SP2 distributed-memory machine in MPI for portability. Experimental results for two model meshes demonstrate that mesh adaption with load balancing gives more than a sixfold improvement over one without load balancing. We also show that JOVE gives a 24-fold speedup on 64 processors compared to sequential execution.

Sohn, Andrew↗
NASA NTRS1991

An adaptive grid method for computing time accurate solutions on structured grids

The solution method consists of three parts: a grid movement scheme; an unsteady Euler equation solver; and a temporal coupling routine that links the dynamic grid to the Euler solver. The grid movement scheme is an algebraic method containing grid controls that generate a smooth grid that resolves the severe solution gradients and the sharp transitions in the solution gradients. The temporal coupling is performed with a grid prediction correction procedure that is simple to implement and provides a grid that does not lag the solution in time. The adaptive solution method is tested by computing the unsteady inviscid solutions for a one dimensional shock tube and a two dimensional shock vortex iteraction.

Bockelie, Michael J.↗
NASA NTRS1993

Time-dependent grid adaptation for meshes of triangles and tetrahedra

This paper presents in viewgraph form a method of optimizing grid generation for unsteady CFD flow calculations that distributes the numerical error evenly throughout the mesh. Adaptive meshing is used to locally enrich in regions of relatively large errors and to locally coarsen in regions of relatively small errors. The enrichment/coarsening procedures are robust for isotropic cells; however, enrichment of high aspect ratio cells may fail near boundary surfaces with relatively large curvature. The enrichment indicator worked well for the cases shown, but in general requires user supervision for a more efficient solution.

Russ D Rausch↗
NASA NTRS1984

Adaptive grid refinement for the Euler and compressible Navier-Stokes equations

The incorporation of a simple a posteriori adaptive mesh method into an explicit finite element based procedure for the solution of compressible flow problems is described. The re-interpolation problem is discussed and results are presented that indicate the improvement in solution quality which can be obtained via such an adaptive mesh approach. The method may lead to the appearance of some badly deformed elements which are removed from the domain of computation.

Lohner, R.↗
NASA NTRS2002

Adjoint-Based, Three-Dimensional Error Prediction and Grid Adaptation

Engineering computational fluid dynamics (CFD) analysis and design applications focus on output functions (e.g., lift, drag). Errors in these output functions are generally unknown and conservatively accurate solutions may be computed. Computable error estimates can offer the possibility to minimize computational work for a prescribed error tolerance. Such an estimate can be computed by solving the flow equations and the linear adjoint problem for the functional of interest. The computational mesh can be modified to minimize the uncertainty of a computed error estimate. This robust mesh-adaptation procedure automatically terminates when the simulation is within a user specified error tolerance. This procedure for estimating and adapting to error in a functional is demonstrated for three-dimensional Euler problems. An adaptive mesh procedure that links to a Computer Aided Design (CAD) surface representation is demonstrated for wing, wing-body, and extruded high lift airfoil configurations. The error estimation and adaptation procedure yielded corrected functions that are as accurate as functions calculated on uniformly refined grids with ten times as many grid points.

Park, Michael A.↗
NASA NTRS1980

Component-adaptive grid embedding

One of the major problems related to transonic flow prediction about realistic aircraft configuration is the generation of a suitable grid which encompasses such configurations. In general, each aircraft component (wing, fuselage, nacelle) requires a grid system that is usually incompatible with the grid systems of the other components; thus, the implementation of finite-difference methods for such geometrically-complex configurations is a difficult task. An approach was developed to treat such a problem. The basic idea is to generate different grid systems, each suited for a particular component. Thus, the flow field domain is divided into overlapping subdomains of different topology. These grid systems are then interfaced with each other in such a way that stability, convergence speed and accuracy are maintained.

Atta, E. H.↗
NASA NTRS1981

Application of adaptive grids to fluid-flow problems with asymptotic solutions

Coordinate system selection is an important consideration in the asymptotic numerical solution of any fluid-flow or heat transfer problem. This paper uses a new technique that provides a simple way of moving the mesh points in physical space in order to reduce the error in the computed asymptotic solution relative to that obtained using a fixed mesh. Applications to fluid-flow problems are presented, including boundary layer flow and inviscid supersonic flow over cylinders, and wedges with associated detached shocks. The treatment of curved boundaries, stationary and nonstationary boundaries, and systems of PDE's is discussed. Significant error reductions are demonstrated.

Rai, M. M.↗
NASA NTRS1981

The use of adaptive grids in conjunction with shock capturing methods

The use of shock capturing finite-difference techniques in computing flow fields containing shocks results in a smeared or oscillatory solution in the vicinity of the shocks. This smearing or oscillatory behavior is due to the discretized form of the governing differential equations used to compute the solution. The discretization error can be reduced by a proper clustering of mesh points in the region of the shock and by using shock aligned grids. This paper uses a simple method that was developed earlier to cluster points near the shocks and serves to introduce a new method of generating a shock aligned mesh. Applications to the one-dimensional inviscid Burgers' equation, supersonic flow over a wedge with the associated straight oblique shock, one- and two-dimensional inviscid flows through an expanding duct and the problem of a straight oblique shock in a uniform supersonic freestream are presented. Significant reduction in the oscillatory behavior of the solution is demonstrated.

Rai, M. M.↗
NASA NTRS1981

A new solution-adaptive grid generation method for transonic airfoil flow calculations

The clustering algorithm is controlled by a second-order, ordinary differential equation which uses the airfoil surface density gradient as a forcing function. The solution to this differential equation produces a surface grid distribution which is automatically clustered in regions with large gradients. The interior grid points are established from this surface distribution by using an interpolation scheme which is fast and retains the desirable properties of the original grid generated from the standard elliptic equation approach.

Nakamura, S.↗
NASA NTRS1983

Adaptive grids generated by elliptic systems

It is pointed out that a finite difference grid which moves with the solution of the partial differential equation being solved can improve the accuracy and efficiency of a numerical algorithm. This technique is particularly advantageous in the solution of problems involving boundary layers or shocks where a poorly chosen grid may give a numerical solution which is useless because of poor resolution or extreme oscillations. The present investigation is concerned with the development of a scheme which does not excessively distort the grid. The grid generation algorithm is based on the numerical solution of a system of elliptic differential equations. Holst and Brown (1981) have used a preliminary solution to move points on the boundary of the physical region and then resolved the problem on a new grid generated by an elliptic system. In the current investigation, the grid movement and the solution will develop simultaneously. The solution is used to modify the generating equations, thereby controlling the grid point distributions.

Mastin, C. W.↗