Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ames Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

An Investigation in the Ames 40- by 80-Foot Wind Tunnel of a YT-56A Turboprop Engine Incorporating a Decoupler and a Controlled-Feathering Device

An investigation of a decoupler and a controlled-feathering device incorporated with the YT-56A turboprop engine has been made to determine the effectiveness of these devices in reducing the high negative thrust (drag) which accompanies power failure of this type of engine. Power failures were simulated by fuel cut-off, both without either device free to operate, and with each device free to operate singly. The investigation was made through an airspeed range from 50 to 230 mph. It was found that with neither device free to operate, the drag levels realized after power failures at airspeeds above 170 mph would impose vertical tail loads higher than those allowable for the YC-130, the airplane for which the test power package was designed. These levels were reached in approximately one second. The maximum drag realized after power failure was not appreciably altered by the use of the decoupler although the decoupler did put a limit on the duration of the peak drag. The controlled-feathering device maintained a level of essentially zero drag after power failure. The use of the decoupler in the YT-56A engine complicates windmilling air-starting procedures and makes it necessary to place operating restrictions on the engine to assure safe flight at low-power conditions,

Rogallo, Vernon L.↗

Impacts of Legacy and Contemporary Nitrogen Inputs on N 2 O and CO 2 Emissions in Miscanthus and Maize Cultivated Soils

ABSTRACT Nutrient inputs influence the sustainability of bioenergy crop production through contemporary (shortly after addition) and legacy effects (persisting over years) on microbial nitrogen (N) and carbon cycling, which contribute to greenhouse gas emissions. However, the relative importance of contemporary and legacy effects and how that could vary by crop functional types is poorly understood. Considering its rhizomatous roots and perennial growth, we hypothesized that Miscanthus × giganteus (M×g) would be more sensitive to legacy N fertilization and the historical context of its environment than an annual crop like maize. To test this hypothesis, we examined the effects of legacy and contemporary N inputs on nitrous oxide (N 2 O) and carbon dioxide (CO 2 ) emissions, as well as key N cycling genes in soils where M×g and maize were grown. A 150‐day soil incubation experiment was conducted using soils from a long‐term M×g and maize fertility experiment with three historic N fertilization rates (0, 112, and 336 kg N ha −1 year −1 ) and a contemporary amendment (60 mg N kg −1 ) with negative control (0 mg N kg −1 ). We observed significant increases in cumulative N 2 O emissions in Mxg soils relative to maize soils, particularly at higher legacy fertilization rates, while contemporary N had no significant effect. Bacterial amo A gene abundance, which plays a significant role in nitrification in nutrient‐rich soils, also increased with higher legacy fertilization rates in M×g soils but was unaffected by the contemporary N. In maize soils, legacy and contemporary N did not significantly affect N 2 O emissions, but cumulative CO 2 emissions and amo A gene abundance significantly increased. The abundances of nor B genes were not significantly influenced by either legacy fertilization or contemporary N amendments in either soil. Our findings demonstrate the greater importance of fertilization history over contemporary N in mediating soil N 2 O emissions, particularly for perennial bioenergy crops.

09 BIOMASS FUELS↗

Unpowered Aerodynamic Characteristics of a 15-Percent Scale Model of a Twin-Engine Commuter Aircraft

An experimental investigation was conducted in the Ames 12-Foot Pressure Wind Tunnel to determine the unpowered aerodynamic characteristics of a 15-percent-scale model of a twin-engine commuter aircraft. Model longitudinal aerodynamic characteristics were examined at discrete flap deflections for various angle-of-attack and wind-tunnel-velocity ranges with the empennage on and off. Data are presented for the basic model configuration consisting of the fuselage, wing, basic wing leading edge, double slotted flaps, midengine nacelles, and empennage. Other configurations tested include a particle-span drooped leading edge (dropped outboard of the engine nacelles), a full-span drooped leading edge, low- and high-mounted engine nacelles, and a single-slotted flap. An evaluation was made of the model mounting system by comparing data obtained with the model mounted conventionally on the wind-tunnel model-support struts and the model inverted.

Morgan, D. G.↗

Low Cost Rapid Response Spacecraft, (LCRRS): A Research Project in Low Cost Spacecraft Design and Fabrication in a Rapid Prototyping Environment

The Low Cost Rapid Response Spacecraft (LCRRS) is an ongoing research development project at NASA Ames Research Center (ARC), Moffett Field, California. The prototype spacecraft, called Cost Optimized Test for Spacecraft Avionics and Technologies (COTSAT) is the first of what could potentially be a series of rapidly produced low-cost satellites. COTSAT has a target launch date of March 2009 on a SpaceX Falcon 9 launch vehicle. The LCRRS research system design incorporates use of COTS (Commercial Off The Shelf), MOTS (Modified Off The Shelf), and GOTS (Government Off The Shelf) hardware for a remote sensing satellite. The design concept was baselined to support a 0.5 meter Ritchey-Chretien telescope payload. This telescope and camera system is expected to achieve 1.5 meter/pixel resolution. The COTSAT team is investigating the possibility of building a fully functional spacecraft for $500,000 parts and $2,000,000 labor. Cost is dramatically reduced by using a sealed container, housing the bus and payload subsystems. Some electrical and RF designs were improved/upgraded from GeneSat-1 heritage systems. The project began in January 2007 and has yielded two functional test platforms. It is expected that a flight-qualified unit will be finished in December 2008. Flight quality controls are in place on the parts and materials used in this development with the aim of using them to finish a proto-flight satellite. For LEO missions the team is targeting a mission class requiring a minimum of six months lifetime or more. The system architecture incorporates several design features required by high reliability missions. This allows for a true skunk works environment to rapidly progress toward a flight design. Engineering and fabrication is primarily done in-house at NASA Ames with flight certifications on materials. The team currently employs seven Full Time Equivalent employees. The success of COTSATs small team in this effort can be attributed to highly cross trained engineering team. The engineers on the team are capable of functioning in two to three engineering disciplines which allows highly efficient interdisciplinary engineering collaboration. NASA Ames is actively proposing mission concepts to use the COTSAT platform to accomplish science. If the COTSAT team validates this approach, it will allow the possibility for remote sensing missions to produce a high science yield for minimal cost and reduced schedule. Another aim of this approach is to yield an accelerated pathway from a Phase A study to mission launch. Leaders in the aerospace industry have shown interest in this methodology. Several visits and tours have been given in the lab. Although the concept of low-cost development is initially met with skepticism from some within the prohibitive aerospace industry, the project's efforts have been highly praised for the accomplishments met within a limited time and budget. Overall the development has progressed tremendously well and the team is answering critical questions for current and future low-cost small satellite developments. COTSAT subsystems are not limited to a specific weight class and could be adapted to produce smaller platforms and to fit various launch vehicles.

Spremo, Stevan↗

Data from "What regulates decomposition in agroecosystems? Insights from reading the tea leaves"

Litter decomposition is a critical Earth process, recycling nutrients and setting a portion of plant tissue on a path toward soil organic matter. Despite this importance, we still lack a good understanding of local factors that regulate decomposition, especially in agroecosystems where management plays an outsized role. To help understand these factors, 1308 tea bags containing green and rooibos tea leaves were buried in 109 plots being exposed to a variety of management practices. This dataset contains the decomposition measurements (mass) of those tea bags that were collected 6 times during the 2018 growing season at 9 long-term experimental farms in Iowa, USA. Additionally, the dataset contains a variety of soil and crop measurements to support the understanding of the soils and the decomposition measurements. Files are presented in .csv format.

Agricultural land management↗

A simple dynamic engine model for use in a real-time aircraft simulation with thrust vectoring

A simple dynamic engine model was developed at the NASA Ames Research Center, Dryden Flight Research Facility, for use in thrust vectoring control law development and real-time aircraft simulation. The simple dynamic engine model of the F404-GE-400 engine (General Electric, Lynn, Massachusetts) operates within the aircraft simulator. It was developed using tabular data generated from a complete nonlinear dynamic engine model supplied by the manufacturer. Engine dynamics were simulated using a throttle rate limiter and low-pass filter. Included is a description of a method to account for axial thrust loss resulting from thrust vectoring. In addition, the development of the simple dynamic engine model and its incorporation into the F-18 high alpha research vehicle (HARV) thrust vectoring simulation. The simple dynamic engine model was evaluated at Mach 0.2, 35,000 ft altitude and at Mach 0.7, 35,000 ft altitude. The simple dynamic engine model is within 3 percent of the steady state response, and within 25 percent of the transient response of the complete nonlinear dynamic engine model.

Johnson, Steven A.↗

The History of the XV-15 Tilt Rotor Research Aircraft: From Concept to Flight

This monograph is a testament to the efforts of many people overcoming multiple technical challenges encountered while developing the XV-15 tilt rotor research aircraft. The Ames involvement with the tilt rotor aircraft began in 1957 with investigations of the performance and dynamic behavior of the Bell XV-3 tilt rotor aircraft. At that time, Ames Research Center was known as the Ames Aeronautical Laboratory of the National Advisory Committee for Aeronautics (NACA). As we approach the new millennium, and after more than 40 years of effort and the successful completion of our initial goals, it is appropriate to reflect on the technical accomplishments and consider the future applications of this unique aircraft class, the tilt rotor. The talented engineers, technicians, managers, and leaders at Ames have worked hard with their counterparts in the U.S. rotorcraft industry to overcome technology barriers and to make the military and civil tilt rotor aircraft safer, environmentally acceptable, and more efficient. The tilt rotor aircraft combines the advantages of vertical takeoff and landing capabilities, inherent to the helicopter, with the forward speed and range of a fixed wing turboprop airplane. Our studies have shown that this new vehicle type can provide the aviation transportation industry with the flexibility for highspeed, long-range flight, coupled with runway-independent operations, thus having a significant potential to relieve airport congestion. We see the tilt rotor aircraft as an element of the solution to this growing air transport problem.

Maisel, Martin D.↗

Internal Acoustics Measurements of a Full Scale Advanced Ducted Propulsor Demonstrator

Acoustics measurements of a Pratt & Whitney full-scale ADP (Advanced Ducted Propulsor), an ultrahigh by-pass ratio engine, were conducted in the NASA Ames 40- by 80-Foot Wind Tunnel. This paper presents data from measurements taken from sensors on a fan exit guide vane in the ADP. Data from two sensors, one at mid-span and the other at the tip of the fan exit guide vane, are presented. At the blade passage frequency (BPF), the levels observed at the various engine and wind speeds were higher at the mid-span sensor than the tip sensor. The coherence between these internal sensors and external microphones were calculated and plotted as a function of angle (angles ranged from 5 degrees to 160 degrees) relative to the ADP longitudinal axis. At the highest engine and wind speeds, the coherence between the tip sensor and the external microphones was observed to decrease at higher multiples of the BPF. These results suggest that the rotor-stator interaction tones are stronger in the mid-span region than at the tip.

Santa Maria, O. L.↗

An investigation of engine influence on inlet performance

The performance of a conventional engine/inlet installation, in which inlet and engine flow field interaction occurs, was compared to the performance of the same inlet remote coupled to the engine. The remote coupled inlet configuration decouples the influence of the engine on the inlet flow field and simulates current small scale inlet test techniques in which inlet airflow is provided by a vacuum source or coupled engine. The investigation was conducted in the NASA-Ames 40- by 80-foot wind tunnel using a General Electric TF-34 turbofan engine and a subsonic inlet having an average inlet contraction ratio of 1.26. Test results indicated that engine interaction allows the inlet to operate with lower distortion levels at and beyond the separation angle-of-attack experienced without engine interaction.

Hodder, B. K.↗

Free-Space Optical Channel Turbulence Prediction: A Machine Learning Approach

Channel turbulence is a formidable obstacle for freespace optical (FSO) communication. Anticipation of turbulence levels is highly important for mitigating disruptions but has not been demonstrated without dedicated, auxiliary hardware. We show that machine learning (ML) can be applied to raw FSO data streams to rapidly predict channel turbulence levels with no additional sensing hardware. FSO was conducted through a controlled channel in the lab under six distinct turbulence levels, and the efficacy of using ML to classify turbulence levels was examined. ML-based turbulence level classification was found to be > 98% accurate with multiple ML training parameters. Classification effectiveness was found to depend on the timescale of changes between turbulence levels but converges when turbulence stabilizes over about a one minute timescale.

Zobaer Islam, Md [School of Electrical and Compute↗

Double arch mirror study. Part 1: Preliminary engineering report

In the proposed design, the NASA AMES 20-in double arch mirror is supported by three clamp and flexure assemblies. The mirror clamp consists of a T-shaped Invar-36 member that goes into a similarly shaped socket in the back of the mirror. The mirror socket is made oversize and contacts the clamp only along the conical surface. The clamp is preloaded by a spring washer and pulls the mirror into contact with the flexure. The clamp is then inserted into the mirror socket through a cutout, is rotated 90 deg, and is then pinned in place. Loading conditions considered in socket design are discussed as well as stress in the socket and clamp. Flexure geometry and stress are examined as well as the effects of flexure error and of mirror cell error.

Vukobratovich, D.↗

Growing Spaceships?

NASA currently has a program called the Space Synthetic Biology Project. Synthetic Biology or SynBio is the design and construction of new biological functions and systems not found in nature. Four NASA field centers, along with experts from industry and academia, have been partnering on the Space Synthetic Biology Project and are working on new breakthroughs in this increasingly useful pursuit, which is part a science discipline and part engineering. Led by researchers at NASA s Ames Research Center, the team is studying how this powerful new tool can help NASA now and in the future. The project was created to harness biology in reliable, robust, engineered systems to support the agency s exploration and science missions, to improve life on Earth and to help shape NASA's future. The program also is intended to contribute foundational tools to the synthetic biology research community.

Robertson, Glen A.↗

Traffic Control via Connected and Automated Vehicles (CAVs): An Open-Road Field Experiment with 100 CAVs

The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. Also called “phantom jams” or “stop-and-go waves,” these instabilities are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system, referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment, the MegaVanderTest (MVT), leveraged a heterogeneous fleet of 100 longitudinally controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this article. The MegaController is a hierarchical control architecture that consists of two main layers. The upper layer is called the Speed Planner and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock onboard sensors. The Speed Planner ingests live data feeds provided by third parties as well as data from our own control vehicles and uses both to perform the speed assignment. The architecture of the Speed Planner allows for the modular use of standard control techniques, such as optimal control, model predictive control (MPC), kernel methods, and others. The architecture of the local controller allows for the flexible implementation of local controllers. Corresponding techniques include deep reinforcement learning (RL), MPC, and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers or only some. Likewise, control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars to electronic selection of adaptive cruise control (ACC) setpoints in others. The proposed architecture technically allows for the combination of all possible settings proposed previously, that is {Speed Planner algorithms} × {local Vehicle Controller algorithms} × {full or partial sensing} × {torque or speed control}. As a result, most configurations were tested throughout the ramp up to the MegaVandertest (MVT).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Data for Impacts of Legacy and Contemporary Nitrogen Inputs on N2O and CO2 Emissions in Miscanthus and Maize Cultivated Soils

Nutrient inputs influence the sustainability of bioenergy crop production through contemporary (shortly after addition) and legacy effects (persisting over years) on microbial nitrogen (N) and carbon cycling, which contribute to greenhouse gas emissions. However, the relative importance of contemporary and legacy effects and how that could vary by crop functional types is poorly understood. Considering its rhizomatous roots and perennial growth, we hypothesized that Miscanthus × giganteu s ( M × g ) would be more sensitive to legacy N fertilization and the historical context of its environment than an annual crop like maize. To test this hypothesis, we examined the effects of legacy and contemporary N inputs on nitrous oxide (N2O) and carbon dioxide (CO2) emissions, as well as key N cycling genes in soils where M × g and maize were grown. A 150-day soil incubation experiment was conducted using soils from a long-term M × g and maize fertility experiment with three historic N fertilization rates (0, 112, and 336 kg N ha−1 year−1) and a contemporary amendment (60 mg N kg−1) with negative control (0 mg N kg−1). We observed significant increases in cumulative N2O emissions in M × g soils relative to maize soils, particularly at higher legacy fertilization rates, while contemporary N had no significant effect. Bacterial amoA gene abundance, which plays a significant role in nitrification in nutrient-rich soils, also increased with higher legacy fertilization rates in M × g soils but was unaffected by the contemporary N. In maize soils, legacy and contemporary N did not significantly affect N2O emissions, but cumulative CO2 emissions and amoA gene abundance significantly increased. The abundances of norB genes were not significantly influenced by either legacy fertilization or contemporary N amendments in either soil. Our findings demonstrate the greater importance of fertilization history over contemporary N in mediating soil N2O emissions, particularly for perennial bioenergy crops.

Carbon↗

Construction of a Direct Water-Injected Two-Stroke Engine for Phased Direct Fuel Injection-High Pressure Charging Investigations

The development of a water injected Orbital Combustion Process (OCP) engine was conducted to assess the viability of using the powerplant for high altitude NASA aircraft and General Aviation (GA) applications. An OCP direct fuel injected, 1.2 liter, three cylinder, two-stroke engine has been enhanced to independently inject water directly into the combustion chamber. The engine currently demonstrates low brake specific fuel consumption capability and an excellent power to weight ratio. With direct water injection, significant improvements can be made to engine power, to knock limits/ignition advance timing, and to engine NO(x) emissions. The principal aim of the testing was to validate a cyclic model developed by the Systems Analysis Branch at NASA Ames Research Center. The work is a continuation of Ames' investigations into a Phased Direct Fuel Injection Engine with High Pressure Charging (PDFI-ITPC).

Somsel, James P.↗

Flowfield Analysis of a Small Entry Probe (SPRITE) Tested in an Arc Jet

A novel concept of small size (diameter less than 15 inches) entry probes named SPRITE (Small Probe Re-entry Investigation for TPS Engineering) has been developed at NASA Ames Research Center (ARC). These flight probes have on-board data acquisition systems that have also been developed in parallel at NASA ARC by Greg Swanson1. Flight probes of this size facilitate testing over a wide range of conditions in arc jets available at NASA ARC, thereby fulfilling a 'test what you fly' paradigm. As indicated by the acronym, these probes, with suitably tailored trajectories, are primarily meant to be robotic flight test beds for TPS materials, although the design is flexible enough to accommodate additional objectives of flight-testing other vehicle subsystems. A first step towards establishing the feasibility of the SPRITE concept is to arc-jet test fully instrumented models at flight scale. In a follow-on to the Large-Scale Article Tests (LSAT2) performed in the 60 MW Interaction Heating Facility (IHF) in late 2008/early 2009, a full-scale model of Deep Space-2 (DS23) made of red oak was tested in the 20 MW Aerodynamic Heating Facility (AHF). There were no issues with mass capture by the diffuser for blunt bodies of roughly 15 inches diameter tested in the 18-inch nozzle of the AHF. Building on this initial success, two identical test articles - SPRITE-T1-1 and SPRITE-T1-2 (T1 indicating the choice of back shell geometry) - were fabricated, and one of them, SPRITE-T1-1, was tested in the AHF recently. Both these test articles, 14 inches in diameter, have a 45deg sphere-cone (like DS2) made of PICA bonded on to a 1/8th inch thick aluminum shell using RTV. The aft portion of the test article is a conical frustum (15deg cone angle) with LI-2200 bonded on to the aluminum shell. Each model is fully instrumented with: (a) thermocouples imbedded in plugs in the heat shield, (b) thermocouples bonded to the aluminum substructure; the thermocouples are distributed over the entire shell, and (c) a few strain gages. Data from some of the thermocouples and gages are acquired by the on-board data acquisition system (DAS), while data from the others are routed to the facility-provided DAS, thereby enabling a cross check on the in situ measurement capability. as inputs to v2.6.1 of the in-house materials thermal response code, FIAT

atmospheric entry↗

Aerothermal Design of a Common Probe for Multiple Planetary Destinations

The idea of a single design of a capsule, for atmospheric entry at Venus, Jupiter, Saturn, Uranus, and Neptune and delivery of payloads for in situ scientific experiments, is currently being pursued by a team of scientists and engineers drawn from four NASA centers - Ames, Langley, JPL, and Goddard. For notional suites of instruments (the selection depending on the destination), interplanetary trajectories have been developed by team members at JPL and Goddard. Using the entry states provided by these trajectories, 3DOF atmospheric flight trajectories have been developed by Langley [4] and Ames. The range of entry flight path angles for each destination is chosen such that the deceleration load lies between 50 g (shallow) and 150-200 g (steep) for a 1.5 m (diameter) rigid aeroshell based on a 45deg sphere-cone geometry and an entry mass of 400 kg.

Allen Jr., G. A.↗