Search NASA⌕ Search

SEARCH · Search NASA

Results for “BENDING THEORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Flutter of laminated plates in supersonic flow

A solution procedure was developed using linear small deflection theory for the flutter of simply supported laminated plates. For such plates, the bending and extensional governing equations are coupled and have cross-stiffness terms which do not appear in classical plate theory. An extended Galerkin method is used to obtain approximate solutions to the governing equations, and the aerodynamic pressure loading used in the analysis is that given by linear piston theory with flow at arbitrary cross-flow angle. A limited parametric study was conducted for typical laminated composite plates. The calculations show that both the bending-extensional coupling and the cross-stiffness terms have a large destabilizing effect on flutter. Since classical plate theory does not consider bending-extensional coupling and cross stiffness terms, it usually gives inaccurate and nonconservative flutter boundaries for laminated plates.

Sawyer, J. W.↗
DOE OSTI2026

Cooperative effect of local active stresses on the macroscopic contractility of elastic fiber networks

The collective action of actively contractile units embedded in elastic biopolymer networks plays a crucial role in regulating the network's macroscopic mechanical response. Here, in this study, we investigate how the macroscopic boundary stress in model elastic fiber networks depends on the number and nature of embedded contractile units, each exerting an isotropic force dipole, as well as on the bending stiffness of fibers. We find that the macroscopic stress increases nonlinearly with the number of dipoles due to mutual stiffening of initially soft, bending-dominated networks. Using effective medium theory, we relate this enhanced contractility to an increase in the effective average network coordination number due to constraints imposed by the force dipoles. By comparing three distinct force dipole models that differ in their local structures, we demonstrate that the specific manner in which an active unit constrains the network strongly influences the onset and nature of the stiffening transition. Our results highlight that not only the quantity but also the local geometry of force-generating units critically determines the macroscopic mechanical behavior. This framework provides a physical basis for understanding how biological systems—such as molecular motors in the cytoskeleton, or adherent cells in the extracellular matrix—can modulate network-scale nonlinear elastic properties through local tuning of active force-generating units.

Biological and medical sciences↗
NASA NTRS1981

Sudden bending of a cracked laminate

The intensification of stresses near a through crack in the laminate that suddenly undergoes bending is investigated. A dynamic plate theory is developed which includes the effects of material inhomogeneity in the thickness direction and realistic crack edge stress singularity and distribution. Numerical examples indicate that (1) the crack moment intensity tends to decrease as the crack length to laminate thickness is increased, and (2) the average load intensity transmitted to a through crack can be reduced by making the inner layers to be stiffer than the outer layers.

Sih, G. C.↗
NASA NTRS1982

Mechanics of couple-stress fluid coatings

The formal development of a theory of viscoelastic surface fluids with bending resistance - their kinematics, dynamics, and rheology are discussed. It is relevant to the mechanics of fluid drops and jets coated by a thin layer of immiscible fluid with rather general rheology. This approach unifies the hydrodynamics of two-dimensional fluids with the mechanics of an elastic shell in the spirit of a Cosserat continuum. There are three distinct facets to the formulation of surface continuum mechanics. Outlined are the important ideas and results associated with each: the kinematics of evolving surface geometries, the conservation laws governing the mechanics of surface continua, and the rheological equations of state governing the surface stress and moment tensors.

Waxman, A. M.↗
NASA NTRS1948

A unified theory of plastic buckling of columns and plates

On the basis of modern plasticity considerations, a unified theory of plastic buckling applicable to both columns and plates has been developed. For uniform compression, the theory shows that long columns which bend without appreciable twisting require the tangent modulus and that long flanges which twist without appreciable bending require the secant modulus. Structures that both bend and twist when they buckle require a modulus which is a combination of the secant modulus and the tangent modulus. (author)

PLATES - PLASTICITY↗
NASA NTRS1948

A unified theory of plastic buckling of columns and plates

On the basis of modern plasticity considerations, a unified theory of plastic buckling applicable to both columns and plates has been developed. For uniform compression, the theory shows that long columns which bend without appreciable twisting require the tangent modulus and that long flanges which twist without appreciable bending require the secant modulus. Structures that both bend and twist when they buckle require a modulus which is a combination of the secant modulus and the tangent modulus.

Stowell, Elbridge Z↗
NASA NTRS2012

Accurate ab initio Quartic Force Fields of Cyclic and Bent HC2N Isomers

Highly correlated ab initio quartic force field (QFFs) are used to calculate the equilibrium structures and predict the spectroscopic parameters of three HC2N isomers. Specifically, the ground state quasilinear triplet and the lowest cyclic and bent singlet isomers are included in the present study. Extensive treatment of correlation effects were included using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations, denoted CCSD(T). Dunning s correlation-consistent basis sets cc-pVXZ, X=3,4,5, were used, and a three-point formula for extrapolation to the one-particle basis set limit was used. Core-correlation and scalar relativistic corrections were also included to yield highly accurate QFFs. The QFFs were used together with second-order perturbation theory (with proper treatment of Fermi resonances) and variational methods to solve the nuclear Schr dinger equation. The quasilinear nature of the triplet isomer is problematic, and it is concluded that a QFF is not adequate to describe properly all of the fundamental vibrational frequencies and spectroscopic constants (though some constants not dependent on the bending motion are well reproduced by perturbation theory). On the other hand, this procedure (a QFF together with either perturbation theory or variational methods) leads to highly accurate fundamental vibrational frequencies and spectroscopic constants for the cyclic and bent singlet isomers of HC2N. All three isomers possess significant dipole moments, 3.05D, 3.06D, and 1.71D, for the quasilinear triplet, the cyclic singlet, and the bent singlet isomers, respectively. It is concluded that the spectroscopic constants determined for the cyclic and bent singlet isomers are the most accurate available, and it is hoped that these will be useful in the interpretation of high-resolution astronomical observations or laboratory experiments.

Inostroza, Natalia↗
NASA NTRS1980

Sudden bending of cracked laminates

A dynamic approximate laminated plate theory is developed with emphasis placed on obtaining effective solution for the crack configuration where the 1/square root of r stress singularity and the condition of plane strain are preserved. The radial distance r is measured from the crack edge. The results obtained show that the crack moment intensity tends to decrease as the crack length to laminate plate thickness is increased. Hence, a laminated plate has the desirable feature of stabilizing a through crack as it increases its length at constant load. Also, the level of the average load intensity transmitted to a through crack can be reduced by making the inner layers to be stiffer than the outer layers. The present theory, although approximate, is useful for analyzing laminate failure to crack propagation under dynamic load conditions.

Sih, G. C.↗
NASA NTRS1985

Analysis of laminated composite plates using a higher-order shear deformation theory

A higher-order deformation theory is used to analyse laminated anisotropic composite plates for deflections, stresses, natural frequencies and buckling loads. The theory accounts for parabolic distribution of the transverse shear stresses, and requires no shear correction coefficients. A displacement finite element model of the theory is developed, and applications of the element to bending, vibration and stability of laminated plates are discussed. The present solutions are compared with those obtained using the classical plate theory and the three-dimensional elasticity theory.

Phan, N. D.↗
NASA NTRS1990

Efficient finite element modeling of laminated composite plates based on higher-order theory

A simple and efficient three-node plate bending element for the analysis of composite laminates is developed from a variational principle. The deformations due to transverse shear and transverse normal effects are accounted for, allowing accurate predictions in the range of thin to thick plates. The methodology incorporates C(exp 0) and C(exp 1) continuous displacement approximations and yields accurate ply-by-ply predictions of all displacement, strain, and stress variables.

Tessler, Alexander↗
NASA NTRS1992

Measurement of multiaxial ply strength by an off-axis flexure test

An off-axis flexure (OAF) test was performed to measure ply strength under multiaxial stress states. This test involves unidirectional off-axis specimens loaded in bending, using an apparatus that allows these anisotropic specimens to twist as well as flex without the complications of a resisting torque. A 3D finite element stress analysis verified that simple beam theory could be used to compute the specimen bending stresses at failure. Unidirectional graphite/epoxy specimens with fiber angles ranging from 90 deg to 15 deg have combined normal and shear stresses on their failure planes that are typical of 45 deg plies in structural laminates. Tests for a range of stress states with AS4/3501-6 specimens showed that both normal and shear stresses on the failure plane influenced cracking resistance. This OAF test may prove to be useful for generating data needed to predict ply cracking in composite structures and may also provide an approach for studying fiber-matrix interface failures under stress states typical of structures.

Crews, John H., Jr.↗
NASA NTRS1986

On mixed and displacement finite element models of a refined shear deformation theory for laminated anisotropic plates

An improved plate theory that accounts for the transverse shear deformation is presented, and mixed and displacement finite element models of the theory are developed. The theory is based on an assumed displacement field in which the inplane displacements are expanded in terms of the thickness coordinate up to the cubic term and the transverse deflection is assumed to be independent of the thickness coordinate. The governing equations of motion for the theory are derived from the Hamilton's principle. The theory eliminates the need for shear correction factors because the transverse shear stresses are represented parabolically. A mixed finite element model that uses independent approximations of the displacements and moments, and a displacement model that uses only displacements as degrees of freedom are developed. A comparison of the numerical results for bending with the exact solutions of the new theory and the three-dimensional elasticity theory shows that the present theory (and hence the finite element models) is more accurate than other plate-theories of the same order.

Reddy, J. N.↗
NASA NTRS1983

Rapid distortion of small-scale turbulence by an axisymmetric contraction

The rapid distortion of small-scale turbulence by an axisymmetric internal contracting flow has been investigated. The analysis is an example of the modern version of rapid distortion theory in that the effects of vortex bending and tilting are included. On the axis of symmetry, the classical results are recovered. The longitudinal and lateral velocity components are suppressed and amplified, respectively, with increasing contraction ratio. These effects are enhanced with increasing radial position. The numerical calculations also show that the correlation between the streamwise and radial velocity components increases monotonically with respect to both the radial location and the contraction ratio. The longitudinal and lateral one-dimensional spectra show a shift towards higher and lower wavenumbers, respectively, as the contraction ratio increases. Here, these effects become less pronounced for larger radii. These results also show that the downstream longitudinal integral length scale based on the streamwise velocity as well as the one based on the transverse velocity increase with the radial coordinate.

Hultgren, L. S.↗