Search NASA⌕ Search

SEARCH · Search NASA

Results for “Beam dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Beam Optics Measurements at the Fermilab Linac

The Fermilab Linac delivers 400 MeV H- beam to the rest of the accelerator complex. The Linac will be replaced by a SRF Linac that doubles the output energy as part of the Proton Improvement Plan-II (PIP-II) project. For successful PIP-II commissioning and operation, a comprehensive suite of longitudinal and transverse measurements are planned to fully characterize the beam dynamics. In the 400 MeV Linac, we used prototype programs to demonstrate the viability of these workflows. Here we present the results of these measurements of longitudinal and transverse optics.

Chen, Erin [Fermilab]↗
DOE OSTI2025

Chromatic Transport Models for ImpactX

This note describes the basic levels of Hamiltonian approximation (for straight-axis elements) that are used in the symplectic beam dynamics modeling code ImpactX. These include: purely linear models, models based on a paraxial (chromatic) expansion of the Hamiltonian, and models based on the exact nonlinear Hamiltonian. The focus here is on paraxial (chromatic) models.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Resistive Wall Simulations for the DARHT Multi-Pulse Test Line

The multi-pulse test line (MPTL) presently under T development at the Dual Axis Radiography Hydrodynamic Test (DARHT) facility may have several meters of drifting beam transport without external magnetic focusing field. The absence of external magnetic focusing is the worst case for growth of the resistive-wall instability. This instability is usually considered to be strictly a long-pulse (low-frequency) problem, but has been theoretically shown to couple the multiple pulses in a long pulse train, such as are expected to be the subject of experimentation on the MPTL. In this note, we explore the resistive wall instability in the MPTL parameter range using our LAMDA beam dynamics code. (LAMDA stands for Linear Accelerator Model for DARHT)

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Lost Muons Analysis

The Muon g-2 experiment at FermiLab represents a significant scientific endeavor aimed at measuring the anomalous magnetic moment of the muon, $a_µ$, with a precision of 140 parts per billion (ppb). During my internship at FermiLab, I focused on the simulation and analysis of Lost Muons, a critical aspect to ensure the accuracy of the experimental results. I conducted a detailed study of the beam dynamics using the existing simulation, I generated a new simulation sample enrich of events with lost muons, I analyzed it and compared the results I obtained with those from the Run-2 dataset acquired by the experiment. In this report I will briefly describe my work, discuss the results and suggest future improvements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Steady-State Microbunching using Optical Stochastic Cooling

Optical Stochastic Cooling (OSC) is a state-of-the-art beam cooling technology first demonstrated in 2021 at the IOTA storage ring at Fermilab's FAST facility. A second phase of the research program is planned to run in 2026 and will incorporate an optical amplifier to enable significantly increased cooling rates and greater operational flexibility. In addition to beam cooling, an OSC system can be configured to enable advanced control over the phase space of the beam. An example operational mode could enable crystallization, where the particles in a bunch are locked into a self-reinforcing, regular microstructure at the OSC fundamental wavelength; we refer to this as Optical Stochastic Crystallization (OSX). OSX represents a new path toward Steady-State Microbunching (SSMB), which may enable light sources combining the high brightness of a free-electron laser with the high repetition rate of a storage ring. Such a source has applications from the terahertz to the extreme ultraviolet (EUV), including high-power EUV generation for semiconductor lithography. This contribution will discuss the integration of OSX development as part of the OSC program at IOTA. The design of an accelerator lattice to enable the mechanism and associated high fidelity simulations demonstrating the beam dynamics will be shown, and a path to realizing an experimental demonstration will be discussed.

Wallbank, Michael James [Fermilab]↗
DOE OSTI2026

An R&D program for milliampere spin-polarized electron beams

The electron injector driving the positron conversion target for Ce+BAF requires a spin-polarized beam with at least 1 mA of average current. While the parameters are not unusual from a beam dynamics point of view, the high average current is challenging due to the finite charge lifetime of the GaAs-based high-polarization photocathodes, even when operated in state-of-the-art load-lock photo-guns. We discuss the dominant limitations and present a systematic experimental program at the Gun Test Stand aiming to overcome them. With a multi-pronged approach involving a redesign of the photo-gun electrodes and an optimized drive laser profile, we hope to demonstrate a charge lifetime in excess of 1 kC from a high-polarization photocathode, mitigating one of the main risks in the injector design.

Bruker, Max [Thomas Jefferson National Accelerator↗
DOE OSTI2026

Design of a high power 8 MeV electron beam injector for the LERF

We present the beamline design for a high power 8 MeV electron injector to be installed at the Low Energy Recirculator Facility (LERF). The injector is designed to provide beam power of up to 80 kW for testing positron source target candidates. We discuss the results of beam dynamics simulations conducted using the General Particle Tracer (GPT) software, where electromagnetic beamline elements were optimized using multi-objective genetic algorithm tools. Additionally, we present preliminary studies on secondary particle generation from both rotating solid and free surface liquid metal jet targets described elsewhere in this workshop.

Lizarraga-Rubio, Victor [Thomas Jefferson National↗
DOE OSTI2026

Measurement of the Cathode Recess

The 113 MHz SRF gun for the coherent electron cooling is designed with adjustable position of the cathode vs. the nose piece of the quarter wave gun as it is shown in Fig. 1. By changing the cathode position we modify the profile of the accelerating field. By retracting the cathode, we reduce the surface field but increase the focusing component as it shown in Fig. 2. The optimal position is defined by the beam dynamics and is found based on simulations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Design of a high power 8 MeV electron beam injector for the LERF

Here, we present the beamline design for a high power 8 MeV electron injector to be installed at the Low Energy Recirculator Facility (LERF). The injector is designed to provide beam power of up to 80 kW for testing positron source target candidates. We discuss the results of beam dynamics simulations conducted using the General Particle Tracer (GPT) software, where electromagnetic beamline elements were optimized using multi-objective genetic algorithm tools. Additionally, we present preliminary studies on secondary particle generation from both rotating solid and free surface liquid metal jet targets described elsewhere in this workshop.

Lizarraga-Rubio, Victor Manuel [Thomas Jefferson N↗
DOE OSTI2026

‘Universal Injector’ at LERF - Layout and Optics Architecture

Here, we present a next level design of a compact injector within the LERF vault, which would serve both the 22 GeV CEBAF and the positron program, while being compatible with the electron source required to produce positrons for Ce+BAF. The baseline design of a 3-pass recirculator features a main linac configured with three C-75 cryo-modules, five isochronous return arcs and three straight sections, facilitating electron beam acceleration up to 650 MeV. The Universal Injector offers flexibility of extraction 1-pass and 2-pass energy electrons, as needed for positron production, with a final 3-pass extraction required by the 650 MeV injector for 22 GeV CEBAF. This note provides an overview of the baseline optics design of the Universal Injector complex, including the 8 MeV injector merger and the recirculator racetrack, including individual extraction lines for all three passes. A comprehensive suite of beam dynamics studies to validate the design is under way; starting with the orbit correction scheme, followed by start-to-end tracking with lattice misalignments and magnet errors.

Bogacz, Alex [Thomas Jefferson National Accelerato↗
DOE OSTI2026

Design Progress for the 22 GeV CEBAF Energy Upgrade

Extending the energy reach of CEBAF up to 22 GeV within the existing tunnel is being explored. Proposed energy upgrade can be achieved by increasing the number of recirculations, while using the existing CEBAF SRF cavity system. A proposal was formulated to raise CEBAF energy by replacing the highest-energy arcs with FFA arcs. The new pair of arcs configured with FFA (Fixed Field Alternating Gradient) lattice would support simultaneous transport of additional 6 passes with energies spanning a factor of two, using the non-scaling FFA principle implemented with Halbach-derived permanent magnets - a novel magnet technology that significantly saves energy and lowers operating costs. The design involves new optics for the linacs and remaining electromagnetic arcs, as well as new electromagnetic switchyard. These feed into the permanent magnet FFA arcs. We also report on ongoing beam dynamics studies and mitigating measures to alleviate energy loss and emittance dilution due to synchrotron radiation.

Bogacz, Alex [Thomas Jefferson National Accelerato↗
DOE OSTI2026

Hofmann Stability Charts Revisited for PIP-II: From Classical Theory to Assumption-Free and ML-Driven Maps

The Hofmann stability chart remains a standard for visualizing parametric resonances in space-charge–dominated linacs, but its use typically relies on non-oscillatory Vlasov dispersion relations with simplifying assumptions (continuous focusing, KV phase space, linear optics, limited transverse–longitudinal coupling). We revisit the chart for the PIP-II linac along three tracks. (1) We reproduce the conventional maps in the (νz/νx, νx/ν0x) plane for relevant εz/εx, providing a validated reference. (2) We remove key assumptions by deriving stability surfaces directly from multi-particle tracking with realistic lattice discreteness, RF defocusing, solenoid/quad optics, and bunched-beam dynamics; local tunes and early-time growth rates are estimated from envelope oscillations and projected to the same coordinates. These assumption-reduced maps recover the canonical stopbands while revealing shifts and broadenings driven by tune modulation, non-KV distributions, and transverse–longitudinal coupling at PIP-II intensities. (3) We train a compact machine-learning surrogate that emulates the growth surface from zero-current optics, tune depression, emittance ratio, bunching factor, and selected lattice descriptors, enabling rapid scans and online working-point selection. We compare the three representations on representative PIP-II sections and discuss implications for commissioning guard bands, resonance avoidance, and routine operations.

Pathak, Abhishek [Fermilab] (ORCID:000000021704208↗
DOE OSTI2026

Optimizations of a Rectilinear Cooling Channel for a Future Muon Collider

Muon colliders require significant beam cooling to achieve the luminosity needed for high-energy physics experiments. Ionization cooling has emerged as a promising solution. This study optimizes a rectilinear muon cooling channel using a multi-objective optimization framework that integrates beam dynamics simulations. We present novel optimizations of final 6D emittance versus total system length as well as those confirming the theoretical trade-offs between transverse and longitudinal emittance. Our results optimizing all stages of the system simultaneously surpass performance benchmarks reported in the literature, demonstrating possible ways to improve the efficiency of such a cooling system.

Zhang, Aubrey [U. Chicago (main)]↗
DOE OSTI2026

Optimizations of a Rectilinear Cooling Channel for a Future Muon Collider

Muon colliders require significant beam cooling to achieve the luminosity needed for high-energy physics experiments. Ionization cooling has emerged as a promising solution. This study optimizes a rectilinear muon cooling channel using a multi-objective optimization framework that integrates beam dynamics simulations. We present novel optimizations of final 6D emittance versus total system length as well as those confirming the theoretical trade-offs between transverse and longitudinal emittance. Our results optimizing all stages of the system simultaneously surpass performance benchmarks reported in the literature, demonstrating possible ways to improve the efficiency of such a cooling system.

Zhang, Aubrey [U. Chicago (main)]↗
NASA NTRS1983

Shuttle flight control and structure interaction

A brief overview of the (DAP) Dynamic Autopilot is given. Results of the dynamic interaction study of the Orbiter with the General Dynamics Beam are presented. Preliminary results of the three degree of freedom payload parametric study are also presented.

Paluszek, M.↗
NASA NTRS1984

The impulsive hard X-rays from solar flares

A technique for determining the physical arrangement of a solar flare during the impulsive phase was developed based upon a nonthermal model interpretation of the emitted hard X-rays. Accurate values are obtained for the flare parameters, including those which describe the magnetic field structure and the beaming of the energetic electrons, parameters which have hitherto been mostly inaccessible. The X-ray intensity height structure can be described readily with a single expression based upon a semi-empirical fit to the results from many models. Results show that the degree of linear polarization of the X-rays from a flaring loop does not exceed 25 percent and can easily and naturally be as low as the polarization expected from a thermal model. This is a highly significant result in that it supersedes those based upon less thorough calculations of the electron beam dynamics and requires that a reevaluation of hopes of using polarization measurements to discriminate between categories of flare models.

Leach, J.↗
NASA NTRS1983

A comparison of the thick-target model with stereo data on the height structure of solar hard X-ray bursts

The thick target, hard solar X-ray source height structure is predicted for the case of a beam that is injected vertically downward, having a power law spectrum, being dominated by Coulomb collisional energy losses, and being structurally characterized by the ratio of hard X-ray flux from an upper part of the source to that from the entire source. These predictions are compared with the flux ratios at 150 and 350 keV which were observed by two spacecraft for five events in which the solar limb occults part of the source for one spacecraft. The energy dependence of the occultation ratio is found to be inconsistent with that predicted by the model, and it is concluded that noncollisional losses must be significant in beam dynamics.

Brown, J. C.↗
NASA NTRS1992

Experimental validation of structural optimization methods

The topic of validating structural optimization methods by use of experimental results is addressed. The need for validating the methods as a way of effecting a greater and an accelerated acceptance of formal optimization methods by practicing engineering designers is described. The range of validation strategies is defined which includes comparison of optimization results with more traditional design approaches, establishing the accuracy of analyses used, and finally experimental validation of the optimization results. Examples of the use of experimental results to validate optimization techniques are described. The examples include experimental validation of the following: optimum design of a trussed beam; combined control-structure design of a cable-supported beam simulating an actively controlled space structure; minimum weight design of a beam with frequency constraints; minimization of the vibration response of helicopter rotor blade; minimum weight design of a turbine blade disk; aeroelastic optimization of an aircraft vertical fin; airfoil shape optimization for drag minimization; optimization of the shape of a hole in a plate for stress minimization; optimization to minimize beam dynamic response; and structural optimization of a low vibration helicopter rotor.

Adelman, Howard M.↗