Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Hemispheric Differences in Tropical Lower Stratospheric Transport and Tracers Annual Cycle

Transport of long-lived tracers (such as O, CO, and N O) in the lower stratosphere largely determines the composition of the entire stratosphere. Stratospheric transport includes the mean residual circulation (with air rising in the tropics and sinking in the polar and middle latitudes), plus two-way isentropic (quasi-horizontal) mixing by eddies. However, the relative importance of two transport components remains uncertain. Previous studies quantified the relative role of these processes based on tropics-wide average characteristics under common assumption of well-mixed tropics. However, multiple instruments provide us with evidence that show significant differences in the seasonal cycle of ozone between the Northern (0-20N) and Southern (0-20S) tropical (NT and ST respectively) lower stratosphere. In this study we investigate these differences in tracer seasonality and quantify transport processes affecting tracers annual cycle amplitude using simulations from Goddard Earth Observing System Chemistry Climate Model (GEOSCCM) and Whole Atmosphere Community Climate Model (WACCM) and compare them to observations from the Microwave Limb Sounder (MLS) on the Aura satellite. We detect the observed contrast between the ST and NT in GEOSCCM and WACCM: annual cycle in ozone and other chemical tracers is larger in the NT than in the ST but opposite is true for the annual cycle in vertical advection. Ozone budgets in the models, analyzed based on the Transformed Eulerian Mean (TEM) framework, demonstrate a major role of quasi-horizontal mixing vertical advection in determining the NTST ozone distribution and behavior. Analysis of zonal variations in the NT and ST ozone annual cycles further suggests important role of North American and Asian Summer Monsoons (associated with strong isentropic mixing) on the lower stratospheric ozone in the NT. Furthermore, multi model comparison shows that most CCMs reproduce the observed characteristic of ozone annual cycle quite well. Thus, latitudinal variations within the tropics have to be considered in order to understand the balance between upwelling and quasi- horizontal mixing in the tropical lower stratosphere and the paradigm of well mixed tropics has to be reconsidered.

Chemistry-Climate Models↗

Characterization of Sensory and Shelter Enrichment in the Rodent Research Habitat

The ISS provides a platform for conducting Rodent Research (RR) in microgravity and 9 missions have been successfully conducted. The results from these experiments have begun to provide new insights into the effects of spaceflight on mammalian physiological systems. After RR-1-4, the Flight IACUC required inclusion of additional cage enrichment into the Rodent Habitats (RH) to "enhance animal well-being by providing animals with sensory and motor stimulation, through structures and resources that facilitate the expression of species typical behaviors". A Hut, in the form of a rigid, mesh igloo-like shelter was implemented beginning with RR-5. The potential influence of the Hut in the novel cage environment of RH on various spaceflight-sensitive physiological systems has not been fully explored. To understand the effects of the Hut, mice (female C57Bl/6J, 15wks) were housed in Vivarium cage (n=5), RH with Hut (n=5), No Hut (n=5), Nestlet (n=10), and Cocoon (n=10) for 7 weeks. There were no differences in weekly body mass or food consumption. Tail blood draw indicated no differences in plasma corticosterone levels, immune cell types, or IgA levels. 24hrs prior to euthanasia, Open Field (OF) and Novel Object (NO) tests were performed. There were no differences across groups, all mice engaged in thigmotaxis (arena wall proximity) in the OF over 50% of the recorded time, and thigmotaxis declined when a NO was introduced. Additional behavioral analysis from daily videos are in progress to quantify activity levels. Post-euthanasia, there were no differences in soleus muscle or adrenal gland mass. Analysis of distal femur cancellous revealed some differences in microarchitecture. These results show that introduction of the Hut may diminish differences observed between spaceflight and ground controls, warranting improved validation of Hut effects in space, and also underscore the value of thorough preflight, ground based testing.

Shirazi-Fard, Yasaman↗

Analysis of the Behavior of Individual Emission Sites on the Surface of a Multi-Tip Field Cathode

A method of analysis of the surface of multi-tip field cathodes using data obtained with the aid of a computer-controlled field emission projector and a system of fast high-voltage scanning is described. An investigation of a polymer/carbon nanotube composite field electron emitter by this method was used to determine the distribution of individual emission sites over the surface of a multi-tip field cathode and to estimate variation of the work function of separate emission sites depending on the applied voltage. The contributions of separate groups of emission sites to a change of the shape of current–voltage characteristic of a multi-tip cathode have been numerically estimated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exploratory Visual Analysis of Anomalous Runtime Behavior in Streaming High Performance Computing Applications

Online analysis of runtime behavior is essential for performance tuning in streaming scientific workflows. Integration of anomaly detection and visualization is necessary to support human-centered analysis, such as verification of candidate anomalies utilizing domain knowledge. In this work, we propose an efficient and scalable visual analytics system for online performance analysis of scientific workflows toward the exascale scenario. Here, our approach uses a call stack tree representation to encode the structural and temporal information of the function executions. Based on the call stack tree features (e.g., execution time of the root function or vector representation of the tree structure), we employ online anomaly detection approaches to identify candidate anomalous function executions. We also present a set of visualization tools for verification and exploration in a level-of-detailed manner. General information, such as distribution of execution times, are provided in an overview visualization. The detailed structure (e.g., function invocation relations) and the temporal information (e.g., message communication) of the execution call stack of interest are also visualized. The usability and efficiency of our methods are verified in a real-world HPC application.

97 MATHEMATICS AND COMPUTING↗

Thermal Behavior and Structural Analysis of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) System

This study focuses on the preparation of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) by mechanical milling (MM) method at 600 rpm. The samples were milled for 40 hours using 5 mm size ball-mill. The samples underwent different heat treatment and its conductivity behavior was investigated. Thermal and structural analysis of the highest conducting LTP system was investigated by means of TGA-DSC, XRD, and laser particle sizer respectively. An increase in the crystallinity of the samples was observed with increase in sintering temperature. The particle sizes of the samples were also observed to increase with increase in crystallinity. The samples that underwent heat treatment exhibit higher conductivity values with a value of 5.59x10{sup -4} Scm{sup -1} at 800 deg. C.

36 MATERIALS SCIENCE↗

Analysis of scattering behavior and radar penetration in AIRSAR data

A technique is presented to physically characterize changes in radar backscatter with frequency in multifrequency single polarization radar images that can be used as a first step in the analysis of the data and the retrieval of geophysical parameters. The technique is automatic, relatively independent of the incidence angle, and only requires a good calibration accuracy between the different frequencies. The technique reveals large areas where scattering changes significantly with frequency and whether the surface has the characteristics of a smooth, slightly rough, rough, or very rough surface.

Rignot, Eric↗

Experimental Investigation and Finite Element Analysis on Fatigue Behavior of Aluminum Alloy 7050 Single-Lap Joints

The fatigue behavior of single-lap four-riveted aluminum alloy 7050 joints was investigated by using high-frequency fatigue test and scanning electron microscope (SEM). Stress distributions obtained by finite element (FE) analysis help explain the fatigue performance. The fatigue test results showed that the fatigue lives of the joints depend on cold expansion and applied cyclic loads. FE analysis and fractography indicated that the improved fatigue lives can be attributed to the reduction in maximum stress and evolution of fatigue damage at the critical location. The beneficial effects of strengthening techniques result in tearing ridges or lamellar structure on fracture surface, decrease in fatigue striations spacing, delay of fatigue crack initiation, crack deflection in fatigue crack propagation and plasticity-induced crack closure.

36 MATERIALS SCIENCE↗

Modal analysis of the behavior of inertial particles in turbulence subjected to Stokes drag

The clustering of small heavy inertial particles subjected to Stokes drag in turbulence, which is the concern of present study, is known to be minimal at small and large Stokes number and substantial at St = $\textit{O}$(1). This nonmonotonic trend, which has been shown computationally and experimentally, is yet to be explained analytically. In this study, we obtain an analytical expression for the Lyapunov exponents that quantitatively predicts this trend. The sum of the exponents, which is the normalized rate of change of the signed volume of a small cloud of particles, is correctly predicted to be negative and positive at small and large Stokes numbers, respectively, asymptoting to $\textit{τQ}$ as $\textit{τ}$ → 0 and $τ^{–1/2}|Q|^{1/4}$ as $\textit{τ} → ∞$, where $\textit{τ}$ is the particle relaxation time and $\textit{Q(τ)}$ is the difference between the norm of the rotation- and strain-rate tensors computed along the particle trajectory, which remains negative at all $\textit{τ}$ in turbulent flows. Additionally, the trajectory crossing is predicted only in hyperbolic flows where Q < 0 for sufficiently inertial particles with a $\textit{τ}$ that scales with $|Q|^{–1/2}$. Following the onset of crossovers, a transition from clustering to dispersion is predicted correctly. We show these behaviors are not unique to three-dimensional isotropic turbulence and can be reproduced closely by a one-dimensional mono-harmonic flow, which appears as a fundamental canonical problem in the study of particle clustering. Analysis of this one-dimensional canonical flow shows that the rate of clustering, quantified as the product of the Lyapunov exponent and particle relaxation time, is bounded by –1/2, behaving with extreme nonlinearity in the hyperbolic flows and always remaining positive in the elliptic flows. Finally, this model problem also confirms that dispersion in a hyperbolic flow will occur only if particles' trajectory cross. These findings, which stem from our analysis, are corroborated by the direct numerical simulations.

42 ENGINEERING↗

Microstructure Analysis and Rheological Behavior of Magnesium Alloys at Semi-solid Temperature Range

Microstructure and rheological properties of AZ91 and Elektron 21 magnesium alloys in semi-solid state were studied. Differential scanning calorimetry revealed significant differences in melting range in analyzed materials. Isothermal annealing for 5, 30 and 80 min, in semi-solid range, corresponding to 50 and 70% of solid fraction, showed slower microstructure coarsening kinetics in Elektron 21 due to the presence of Zr- and RE-enriched precipitations. Ostwald ripening and coalescence resulted in decrease in grains density with increasing annealing time and temperature. Hardness after annealing showed overall tendency to diminish with soaking time probably due to the growth of average grain size. Rheological analysis showed tendency to lower the value of dynamic viscosity coefficient as shear rate rise, which confirmed non-Newtonian flow behavior. The highest values of dynamic viscosity coefficient were obtained for alloy AZ91.

36 MATERIALS SCIENCE↗

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fire behavior and risk analysis in spacecraft

Practical risk management for present and future spacecraft, including space stations, involves the optimization of residual risks balanced by the spacecraft operational, technological, and economic limitations. Spacecraft fire safety is approached through three strategies, in order of risk: (1) control of fire-causing elements, through exclusion of flammable materials for example; (2) response to incipient fires through detection and alarm; and (3) recovery of normal conditions through extinguishment and cleanup. Present understanding of combustion in low gravity is that, compared to normal gravity behavior, fire hazards may be reduced by the absence of buoyant gas flows yet at the same time increased by ventilation flows and hot particle expulsion. This paper discusses the application of low-gravity combustion knowledge and appropriate aircraft analogies to fire detection, fire fighting, and fire-safety decisions for eventual fire-risk management and optimization in spacecraft.

Friedman, Robert↗

Multidimensional quantitative phenotypic and molecular analysis reveals neomorphic behaviors of p53 missense mutants

Abstract Mutations in the TP53 tumor suppressor gene occur in >80% of the triple-negative or basal-like breast cancer. To test whether neomorphic functions of specific TP53 missense mutations contribute to phenotypic heterogeneity, we characterized phenotypes of non-transformed MCF10A-derived cell lines expressing the ten most common missense mutant p53 proteins and observed a wide spectrum of phenotypic changes in cell survival, resistance to apoptosis and anoikis, cell migration, invasion and 3D mammosphere architecture. The p53 mutants R248W, R273C, R248Q, and Y220C are the most aggressive while G245S and Y234C are the least, which correlates with survival rates of basal-like breast cancer patients. Interestingly, a crucial amino acid difference at one position—R273C vs. R273H—has drastic changes on cellular phenotype. RNA-Seq and ChIP-Seq analyses show distinct DNA binding properties of different p53 mutants, yielding heterogeneous transcriptomics profiles, and MD simulation provided structural basis of differential DNA binding of different p53 mutants. Integrative statistical and machine-learning-based pathway analysis on gene expression profiles with phenotype vectors across the mutant cell lines identifies quantitative association of multiple pathways including the Hippo/YAP/TAZ pathway with phenotypic aggressiveness. Further, comparative analyses of large transcriptomics datasets on breast cancer cell lines and tumors suggest that dysregulation of the Hippo/YAP/TAZ pathway plays a key role in driving the cellular phenotypes towards basal-like in the presence of more aggressive p53 mutants. Overall, our study describes distinct gain-of-function impacts on protein functions, transcriptional profiles, and cellular behaviors of different p53 missense mutants, which contribute to clinical phenotypic heterogeneity of triple-negative breast tumors.

60 APPLIED LIFE SCIENCES↗

Verification of the Coupled Fluid/Solid Transfer in a CASL Grid-to-Rod-Fretting Simulation: A Technical Brief on the Analysis of Convergence Behavior and Demonstration of Software Tools for Verification

For a CASL grid-to-rod fretting problem, Sandia's Percept software was used in conjunction with the Sierra Mechanics suite to analyze the convergence behavior of the data transfer from a fluid simulation to a solid mechanics simulation. An analytic function, with properties relatively close to numerically computed fluid approximations, was chosen to represent the pressure solution in the fluid domain. The analytic pressure was interpolated on a sequence of grids on the fluid domain, and transferred onto a separate sequence of grids in the solid domain. The error in the resulting pressure in the solid domain was measured with respect to the analytic pressure. The error in pressure approached zero as both the fluid and solids meshes were refined. The convergence of the transfer algorithm was limited by whether the source grid resolution was the same or finer than the target grid resolution. In addition, using a feature coverage analysis, we found gaps in the solid mechanics code verification test suite directly relevant to the prototype CASL GTRF simulations.

99 GENERAL AND MISCELLANEOUS↗

Numerical analysis on seismic behavior of reinforced concrete beam to concrete filled steel tubular column connections with ring-beam

This paper presents numerical study of the seismic behavior of reinforced concrete beam to concrete filled steel tube column connections with ring-beam. The material stress-strain relations, element type and boundary condition are selected, which are consistent with actual situation. Then the seismic behavior of this type of joint are researched by ABAQUS, and finite element analyses are conducted under cyclic loading. Its parameters are discussed including thickness of steel tubular column wall, sectional dimension of the ring-beam and strength of the core concrete. The results show that the ultimate capacity of the connections is improved with sectional dimension of the ring-beam increased. In the meanwhile, the influence on skeleton curve of the joints is slight of which included thickness of steel tubular column wall and strength of the core concrete.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional microstructural analysis of fragmentation behavior of platelet Al3Ti particles in Al-Al3Ti composite deformed by equal-channel angular pressing

Highlights: • Particle distribution in ECAPed Al-Al{sub 3}Ti composite depends on material flow of matrix. • Fragmentation of Al{sub 3}Ti particles by ECAP occurs along twin boundary in the particles. • Al{sub 3}Ti particles in the composite fragment after twin deformation of the particles. - Abstract: The fragmentation of platelet Al{sub 3}Ti particles in an Al-Al{sub 3}Ti composite by equal-channel angular pressing (ECAP) is investigated using three-dimensional (3D) microstructural evaluation and crystallography. The Al-Al{sub 3}Ti composite comprises coarse platelet Al{sub 3}Ti particles in an α-Al matrix. The ECAP of this composite is performed for up to 4 passes under processing routes A, B{sub c}, and C. Route B{sub c} produces the smallest Al{sub 3}Ti particle fragments in comparison with the fragments produced under routes A and C. This is because that route B{sub c} produces the largest number of shearing directions and shearing planes. Platelet Al{sub 3}Ti particle fragments in the specimen deformed by ECAP under route A are homogeneously distributed along the deformation axis. In contrast, in the specimens deformed by four ECAP passes under routes B{sub c} and C, the Al{sub 3}Ti particle fragments are gathered into several groups. The fragment groups have a length similar to the initial length of the platelet Al{sub 3}Ti particles. These spatial distributions of particle fragments can be explained by material flow of α-Al matrix during ECAP. Moreover, from 3D microstructural evaluation and crystallographic analysis of the Al{sub 3}Ti particle fragments, it is found that the Al{sub 3}Ti particles are preferentially fragmented on the twin boundary plane of {112}{sub Al3Ti}. Therefore, it is concluded that fragmentation of a platelet Al{sub 3}Ti particle by ECAP occurs along the twin boundary plane after twin deformation.

36 MATERIALS SCIENCE↗