SEARCH · Search NASA

Results for “Brillouin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Deep Neural Network Assisted Distributed Strain and Temperature Fiber Sensor System for Natural Gas Pipeline Monitoring

Natural gas pipeline integrity monitoring is crucial to detect potential leaks, find structural issues, and prevent environmental damage. This article presents a system of natural gas pipeline monitoring that uses a specialized double Brillouin peak sensing fiber along with the Brillouin optical time domain analysis (BOTDAs) technique. The calibrated sensing fiber coefficients for strain and temperature are 41.8 kHz/ με and 0.9 MHz/°C for peak 1; and 47.2 kHz/ με , and 1.11 MHz/°C for peak 2, respectively. Initially, lab tests were performed by installing a short section of double Brillouin peak fiber (DBPF) on a 1-in steel pipe under pressure up to 1000 per square inch (psi) at elevated temperatures. Simultaneous distributed measurements of temperature and pressure-induced hoop strain were successfully measured. Considering the long processing speed to extract Brillouin frequency shift (BFS), we employ a novel probabilistic deep neural network (PDNN) framework for rapid BFS prediction. Additionally, using the Finite Element Method, the effects of the pipeline pressure on hoop strain were modeled and compared to the experimental hoop strain under the same set of pipeline conditions. Finally, an actual 4-in outer diameter steel natural gas pipeline was used for pilot-scale tests, where hoop strain was measured at various pressure levels. Leaks were simulated to demonstrate accurate pipeline integrity monitoring. At an internal pipe pressure of 1000 psi, hoop strain of approximately 300 με was observed, and the sensitivity was calculated as 0.28 με /psi. The results of this pilot-scale study demonstrated that the system is capable of performing distributed monitoring sufficient to detect pipeline pressure and the presence of leaks to ensure the safe operation of gas pipelines in the field.

03 NATURAL GAS↗

DOE OSTI2023

Robust Vector BOTDA Signal Processing with Probabilistic Machine Learning

This paper presents a novel probabilistic machine learning (PML) framework to estimate the Brillouin frequency shift (BFS) from both Brillouin gain and phase spectra of a vector Brillouin optical time-domain analysis (VBOTDA). The PML framework is used to predict the Brillouin frequency shift (BFS) along the fiber and to assess its predictive uncertainty. We compare the predictions obtained from the proposed PML model with a conventional curve fitting method and evaluate the BFS uncertainty and data processing time for both methods. The proposed method is demonstrated using two BOTDA systems: (i) a BOTDA system with a 10 km sensing fiber and (ii) a vector BOTDA with a 25 km sensing fiber. The PML framework provides a pathway to enhance the VBOTDA system performance.

47 OTHER INSTRUMENTATION↗

NASA NTRS1996

Demonstration and Analysis of Filtered Rayleigh Scattering Flow Field Diagnostic System

Filtered Rayleigh Scattering (FRS) is a diagnostic technique which measures velocity, temperature, and pressure by determining Doppler shift, total intensity, and spectral line shape of laser induced Rayleigh-Brillouin scattering. In the work reported here, this is accomplished by using a narrow line width, injection seeded Nd-YAG laser sheet to induce Rayleigh-Brillouin scattering from a gas flow. This light is passed through an optical notch filter, and transmitted light is imaged onto an intensified charge coupled display (CCD) camera. By monitoring the grayscale value at a particular pixel while the laser frequency is tuned, the convolution between the Rayleigh-Brillouin scattering profile and the filter transmission profile is attained. Since the filter profile can be independently measured, it can be deconvolved from the measuring signal, yielding the Rayleigh-Brillouin scattering profile. From this profile, flow velocity, temperature, and pressure are determined. In this paper the construction and characterization of the optical notch filter and a newly developed frequency apparatus are discussed.

Forkey, Joseph N.↗

DOE OSTI2022

Anisotropic surface state in a topological semimetal candidate Ta 3 SiTe 6

Using high-resolution angle-resolved photoemission spectroscopy, we studied the surface state of Ta 3 SiTe 6 , a candidate of topological semimetal protected by nonsymmorphic symmetry. Through photon-energy dependent measurements, the surface state near the Fermi level was detected. By determining the band dispersions, we found that the surface state is topological trivial. Around the surface Brillouin zone center, the surface bands disperse linear-like, forming a band crossing (zero energy gap) point at about 0.2 eV below the Fermi level. In Ta 3 SiTe 6 's rectangular surface Brillouin zone, the surface bands only cross the Fermi level along one axis, forming two hole-like Fermi pockets near surface Brillouin zone boundaries. Although the observed surface state is not topological, we proposed that its anisotropic Fermi surface topography could be potentially useful for future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Harnessing quantum light for microscopic biomechanical imaging of cells and tissues

The biomechanical properties of cells and tissues play an important role in our fundamental understanding of the structures and functions of biological systems at both the cellular and subcellular levels. Recently, Brillouin microscopy, which offers a label-free spectroscopic means of assessing viscoelastic properties in vivo, has emerged as a powerful way to interrogate those properties on a microscopic level in living tissues. However, susceptibility to photodamage and photobleaching, particularly when high-intensity laser beams are used to induce Brillouin scattering, poses a significant challenge. This article introduces a transformative approach designed to mitigate photodamage in biological and biomedical studies, enabling nondestructive, label-free assessments of mechanical properties in live biological samples. By leveraging quantum-light-enhanced stimulated Brillouin scattering (SBS) imaging contrast, the signal-to-noise ratio is significantly elevated, thereby increasing sample viability and extending interrogation times without compromising the integrity of living samples. The tangible impact of this methodology is evidenced by a notable three-fold increase in sample viability observed after subjecting the samples to three hours of continuous squeezed-light illumination, surpassing the traditional coherent light-based approaches. The quantum-enhanced SBS imaging holds promise across diverse fields, such as cancer biology and neuroscience where preserving sample vitality is of paramount significance. By mitigating concerns regarding photodamage and photobleaching associated with high-intensity lasers, this technological breakthrough expands our horizons for exploring the mechanical properties of live biological systems, paving the way for an era of research and clinical applications.

Li, Tian↗

DOE OSTI2021

Search for nonreciprocal magnons in MnPS 3

Recent articles have suggested that the quasi-two-dimensional antiferromagnet MnPS 3 may have nonreciprocal magnons, whereby magnons in a Brillouin zone corner at + q have different energies than those at q . The magnons along the Brillouin zone boundaries were measured using neutron three-axis spectrometry, paying careful attention to the resolution function, to determine whether such nonreciprocity was present. The data show that, within the resolution, there are no significant differences between the magnons in opposite Brillouin zone corners. The findings are combined with a recently published study of MnPS 3 by neutron resonant spin-echo spectroscopy and discussed within the context of the theories for nonreciprocal magnons.

2-dimensional systems↗

DOE OSTI2023

Spectral function of the $J_1$ – $J_2$ Heisenberg model on the triangular lattice

Spectral probes, such as neutron scattering, are crucial for characterizing excitations in quantum many-body systems and the properties of quantum materials. Among the most elusive phases of matter are quantum spin liquids, which have no long-range order even at zero temperature and host exotic fractionalized excitations with nontrivial statistics. These phases can occur in frustrated quantum magnets, such as the paradigmatic Heisenberg model with nearest- and next-nearest-neighbor exchange interactions on the triangular lattice, the so-called $J_1$ – $J_2$ model. In this work, we compute the spectral function using large-scale matrix product state simulations across the three different phases of this model's phase diagram, including a quantum spin-liquid phase at intermediate $J_2$/$J_1$. Despite a plethora of theoretical and experimental studies, the exact nature of this phase is still contested, with the dominant candidates being a gapped $\mathbb{Z}_2$, a gapless U(1) Dirac, and a spinon Fermi surface quantum spin-liquid state. We find a V-shaped spectrum near the center of the Brillouin zone ($Γ$ point), a key signature of a spinon Fermi surface, observed in prior neutron scattering experiments. However, we find a small gap near the $Γ$ point, ruling out such a phase. Furthermore, we find localized gapless excitations at the corner of the Brillouin zone boundary (K point) and the middle of the edge of the Brillouin zone boundary (M point), ruling out the gapped $\mathbb{Z}_2$ spin-liquid phase. Here, our results imply that the intermediate spin-liquid phase is a gapless $U(1)$ Dirac spin liquid, and provide clear signatures to detect this phase in future neutron scattering experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1974

Generation of large scale field-aligned density irregularities in ionospheric heating experiments

Threshold and growth rate for stimulated Brillouin scattering are calculated for a uniform magnetoplasma. These are then compared with the threshold and growth rate of a new thermal instability in which the nonlinear Lorentz force felt by the electrons at the beat frequency of the two electromagnetic waves is replaced by a pressure force due to differential heating in the interference pattern of the pump wave and the generated electromagnetic wave. This thermal instability, which is still essentially stimulated Brillouin scattering, has a threshold which is especially low when the propagation vector of the beat wave is almost normal to the magnetic field. The threshold is then considerably lower than the threshold for normal stimulated Brillouin scattering and therefore this new instability is probably responsible for the generation of large scale field aligned irregularities and ionospheric spread F.

Fejer, J. A.↗

NASA NTRS1992

An ultra-sensitive coherent detector capable of single photon detection for lidar applications

The properties of Ultra-Sensitive Coherent Detectors (USCD's) are nearly that of an ideal detector for lidar applications. Recent progress in the development of USCD's is briefly reviewed, and its imaging capability is demonstrated. These new detectors possess properties with significant improvements over conventional technology. These improvements include a high quantum efficiency of 0.95, gain in excess of 10 exp 13, a narrow bandwidth of 180-300 MHz at 1 micron, imaging capability, and phase conjugation ability. We have constructed a USCD using two Nd:YAG laser amplifiers and a four-wave Brillouin mirror (FWBM) using SnCl4 as the Brillouin medium. Using a 10 Hz repetitively-pulsed single frequency laser, we have shown that the Brillouin medium is free from thermal blooming and from optical breakdown.

Amimoto, Sherwin↗

DOE OSTI2024

Ultra-Long Distance BOTDA Sensor System Employing Hybrid Amplification and Advanced Noise Reduction Techniques

Brillouin Optical Time Domain Analysis (BOTDA) sensor systems play a pivotal role in distributed sensing, which enables precise measurements of strain and temperature across extensive fiber lengths. This research offers a comprehensive strategy to extend the sensing range of BOTDA systems beyond tens of kilometers while maintaining high spatial resolutions. Such enhanced sensing is realized through the integration of distributed Raman amplification, inline amplification using erbium-doped fiber amplifiers (EDFA), and advanced noise reduction techniques. Optimizing Raman pump and probe wave profiles ensures the robustness of Brillouin scattering signals, effectively countering attenuation-induced losses. Additionally, enhancing weak Brillouin signals by strategically placing EDFAs at optimal fiber locations keeps sensor sensitivity high. Leveraging inherent redundancy in measured data as a function of frequency and fiber distance, the non-local means (NLM) filter removes noise while preserving essential physical information. In summary, this research has shown a holistic exploration of extending BOTDA’s distance sensing capabilities up to 150 km with spatial resolutions of 8 meters.

Bhatta, Hari↗

DOE OSTI2024

Utah FORGE: Well 16B(78)-32 DTS, RFS DSS Strain, and Absolute Strain Circulation Test Fiber Optic Data - August 2024

This dataset contains processed fiber optic measurements collected during the extended cross-well circulation test at the Utah FORGE site in August 2024. The data was acquired from the 16B(78)-32 well using distributed fiber optic sensing (DFOS) technology, including distributed temperature sensing (DTS) on multimode fiber and distributed strain sensing (DSS) measurements on single-mode fiber. The dataset includes Brillouin absolute strain, Rayleigh frequency shift (RFS) DSS strain change, RFS DSS strain change rate, and temperature (DTS) data, all stored in HDF5 format. Time coordinates are provided in UTC, and depth measurements are given in measured depth relative to the rotary kelly bushing (MD RKB) in feet. The spatial sampling on the RFS DSS strain data and the Brillouin Absolute Total Strain data is 20 cm and the spatial sampling on the DTS data is 1m. The dataset is accompanied by a report from Neubrex, which provides further documentation.

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

Simultaneous measurement of the exchange parameter and saturation magnetization using propagating spin waves

The exchange interaction in ferromagnetic ultra thin films is a critical parameter in magnetization-based storage and logic devices, yet the accurate measurement of it remains a challenge. While a variety of approaches are currently used to determine the exchange parameter, each has its limitations, and good agreement among them has not been achieved. To date, neutron scattering, magnetometry, Brillouin light scattering, spin-torque ferromagnetic resonance spectroscopy, and Kerr microscopy have all been used to determine the exchange parameter. Here, we present a method that exploits the wavevector selectivity of Brillouin light scattering to measure the spin wave dispersion in both the backward volume and Damon–Eshbach orientations. The exchange, saturation magnetization, and magnetic thickness are then determined by a simultaneous fit of both dispersion branches with general spin wave theory without any prior knowledge of the thickness of a magnetic “dead layer.” In this study, we demonstrate the strength of this technique for ultrathin metallic films, typical of those commonly used in industrial applications for magnetic random-access memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Dynamic coupling and spin-wave dispersions in a magnetic hybrid system made of an artificial spin-ice structure and an extended NiFe underlayer

We present a combined experimental and numerical study of the spin-wave dispersion in a NiFe artificial spin-ice (ASI) system consisting of an array of stadium-shaped nanoislands deposited on the top of a continuous NiFe film with non-magnetic spacer layers of varying thickness. The spin-wave dispersion, measured by wavevector resolved Brillouin light scattering spectroscopy in the Damon–Eshbach configuration, consists of a rich number of modes, with either stationary or propagating character. We find that the lowest frequency mode displays a bandwidth of ~0.5 GHz, which is independent of the presence of the film underneath. On the contrary, the Brillouin light scattering intensity of some of the detected modes strongly depends on the presence of the extended thin-film underlayer. Micromagnetic simulations unveil the details of the dynamic coupling between the ASI lattice and film underlayer. Interestingly, the ASI lattice facilitates dynamics of the film either specific wavelengths or intensity modulation peculiar to the modes of the ASI elements imprinted in the film. Our results demonstrate that propagating spin waves can be modulated at the nanometer length scale by harnessing the dynamic mode coupling in the vertical, i.e., the out-of-plane direction of suitably designed magnonic structures.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Evaluation of the Tenti S6 model for hydrocarbon fuels at elevated temperatures using filtered Rayleigh scattering measurements

This Letter targets the assessment of the well-known Tenti S6 model for predicting the Rayleigh–Brillouin scattering (RBS) spectra of select gas–phase hydrocarbon fuels (CH 4 , C 2 H 2 , C 2 H 4 , C 3 H 8 , and C 4 H 10 ) over a temperature range of 300 to 700 K. The Tenti S6 model is evaluated by comparing filtered Rayleigh scattering (FRS) measurements to synthetic FRS signals generated from the combination of the Tenti S6 output and an accurate iodine absorption filter model. Here, the experimental and synthetic FRS results agree very well (<3% difference) over the full temperature range for CH 4 , C 2 H 2 , and C 2 H 4 , indicating accurate calculation of the RBS spectra. For C 3 H 8 and C 4 H 10 , there are some large differences between the experimental and synthetic FRS results which cannot be resolved through tuning of bulk viscosity, internal heat capacity, or inclusion of vibrational degrees of freedom, suggesting the need for detailed measurements of the Rayleigh–Brillouin spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2022

High resolution ferromagnetic and antiferromagnetic correlations in La 0.7 Ca 0.3 MnO 3

La 0.7 Ca 0.3 MnO 3 (LCMO30) is a perovskite manganite with a phase transition (T C = 238 K) between a paramagnetic insulator and a ferromagnetic metal. We use single-crystal, inelastic neutron scattering to refine previous work on the low energy (ℏω < 10 meV) magnetic excitations. At 300 K the spectrum consists of a diffusive ferromagnetic component at the pseudo-cubic Brillouin zone center coexisting with a quasielastic excitation located at the pseudo-cubic Brillouin zone edge. Both components are anti-correlated with ferromagnetic long-range order, showing weakened intensity at 215 K in the ferromagnetic phase. Polarized neutron scattering shows both features to be purely magnetic in origin. Furthermore, this indicates the simultaneous presence of ferromagnetic and antiferromagnetic correlations (located, respectively, at the zone center and zone edge) in a three-dimensional perovskite, while this coexistence had been previously observed only in a bilayer compound.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Response of vibrational properties and thermal conductivity of perovskites to pressure

We study the response of SrTiO 3 and KTaO 3 's vibrational properties and thermal conductivity to pressurization. Our goal is to improve the understanding of the relationship between crystal structure, vibrational dynamics, and thermal conductivity in perovskites. We measure the thermal conductivity of SrTiO 3 and KTaO 3 up to 28 GPa by time-domain thermoreflectance. We also perform Raman scattering and stimulated Brillouin scattering measurements of SrTiO 3 and KTaO 3 to characterize changes in vibrational dynamics with pressure. The thermal conductivity of SrTiO 3 increases under pressure with a slope comparable to that of other perovskites whose thermal conductivity has been measured versus pressure. Alternatively, the thermal conductivity of KTaO 3 has a stronger pressure dependence than that of other materials with similar crystal structure. We correlate pressure-induced changes in Raman and Brillouin spectra with pressure-induced changes in thermal conductivity. We show that pressure-induced changes in phonon lifetimes dominate the pressure dependence of thermal conductivity. This study provides benchmark knowledge of why depends on pressure and improves understanding of structure/thermal-property relationships.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗

DOE OSTI2024

A topological Hund nodal line antiferromagnet

The interplay of topology, magnetism, and correlations gives rise to intriguing phases of matter. In this study, through state-of-the-art angle-resolved photoemission spectroscopy, density functional theory, and dynamical mean-field theory calculations, we visualize a fourfold degenerate Dirac nodal line at the boundary of the bulk Brillouin zone in the antiferromagnet YMn 2 Ge 2 . We further demonstrate that this gapless, antiferromagnetic Dirac nodal line is enforced by the combination of magnetism, space-time inversion symmetry, and nonsymmorphic lattice symmetry. The corresponding drumhead surface states traverse the whole surface Brillouin zone. YMn 2 Ge 2 thus serves as a platform to exhibit the interplay of multiple degenerate nodal physics and antiferromagnetism. Interestingly, the magnetic nodal line displays a d-orbital dependent renormalization along its trajectory in momentum space, thereby manifesting Hund's coupling. Our findings offer insights into the effect of electronic correlations on magnetic Dirac nodal lines, leading to an antiferromagnetic Hund nodal line.

36 MATERIALS SCIENCE↗