Search NASA⌕ Search

SEARCH · Search NASA

Results for “COAXIAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Studies of Elementary Reactions of Chemical Importance in the Atmospheres of Planets

The methyl self-reaction was studied at T = 298 K and 202 K and at three different pressures, P = 0.5, 1.0, and 2.1 Torr. The experimental measurements were performed in our discharge flow-mass spectrometer (DF-MS) apparatus. The methyl radicals were generated by the reaction of F with methane. Passing a mixture of molecular fluorine, F2, in helium through a microwave cavity generated the atomic fluorine reagent. The atomic F enters the flow tube through a rear port on the flow tube. The methane reagent enters the flow tube through a movable injector located coaxial in the flow tube. The decay of methyl radical signal was monitored at a mass/charge ratio (m/z) of 15 as a function of the injector distance. To minimize secondary chemistry from the reaction CH3 + F to CH2 + HF the initial [CH4](sub 0)/[F](sub 0) was above 37.0 and typically 100. This ensures a 1:1 relationship between initial [F] and [CH3]. A titration of F with excess Cl2 yields the initial [F](sub 0). Our experimental methodology to accurately measure the mass spectrometer scaling factor, i.e., the relationship between initial signal and [CH3](sub 0) has been improved. Now we measure the CH3 signal decay under exponential decay conditions at low initial [F](sub 0), 3x10(exp 11) molecule/cc, in the presence of Cl2. This minimizes the second-order decay contributed by the CH3 self-reaction and a simple extrapolation of the 1n(signal) vs time plot to t = 0 gives the initial signal. This provides the desired relationship between initial signal at 15 amu and [CH3](sub 0). The resulting calibration is then applied to the observed decay of the CH3 signal at high concentrations of CH3 assuming linearity of this scaling factor.

Nesbitt, Fred L.↗

The influence of large-scale motion on turbulent transport for confined coaxial jets

The existence of large-scale coherent structures in turbulent shear flows has been well documented in the literature. The importance of these structures in flow entrainment, momentum transport and mass transport in the shear layer has been suggested by several researchers. Comparisons between existing models and experimental data for shear flow in confined coaxial jets reinforce the necessity of further investigation of the large scale structures. These comparisons show the greatest discrepancy between prediction and actual results in the developing flow region where the large scales exist. It was also observed that the momentum transport rate comparisons were very bad. Finally, Schetz has reviewed mixing flows and concluded that large-scale structures were essential aspects of future modeling efforts.

Brondum, D. C.↗

Supersonic coaxial jet noise predictions

Predictions are made for the noise radiation from supersonic, coaxial jets. These predictions are based on the assumption that the noise radiation in the downstream direction of supersonic jets is dominated by sound generated by instability waves with supersonic phase velocities relative to ambient. Since the analysis requires a known mean flow and the coaxial jet mean flow is not described easily in terms of analytical functions, a numerical prediction is made for its development. The compressible, Reynolds averaged, boundary layer equations are solved with a modified mixing length turbulence model. The model has been calibrated to account for compressibility and temperature effects on the rate of mixing. Both normal and inverted velocity profile jets are considered. Predictions are made for the differences between the noise radiated by coaxial jets with difference operating conditions and a single reference jet with the same thrust, mass flow, and exit area. The effects of area ratio changes and simulated enhanced mixing on noise radiation are also considered.

Dahl, Milo D.↗

Effect of convective Mach number on mixing of coaxial circular and rectangular jets

Rectangular supersonic free and coaxial jets were used to enhance mixing relative to a circular jet in a convective Mach number range of 0.5 to 2.2. The different convective Mach numbers were obtained by changing the central jet gas composition, the temperatures of the inner and outer flows, and the velocity of the coaxial flow. The experimental techniques used were schlieren photography, total pressure, and gas-sampling measurements. For all test conditions the rectangular jets showed substantial improved mixing relative to a circular jet. The free jets showed high mixing in the circumferential region of the jet while the coaxial jet had a high mixing rate inside the central jet.

Gutmark, E.↗

Effects of geometric and flow-field variables on inverted-velocity-profile coaxial jet noise and source distributions

This paper presents relationships between the noise generation characteristics and the flow-field characteristics for inverted-velocity-profile coaxial jets. Noise measurements were made at four different sideline distances in order to determine the apparent noise source locations, and flow-field characteristics were determined from jet plume pressure/temperature surveys. These relationships are based on a published NASA Lewis prediction model, the basic assumptions of which are shown to be consistent with the experimental data reported herein. Improvements to the noise prediction procedure, on the basis of the present study, are included, which increase the accuracy of the high-frequency noise prediction.

Stone, J. R.↗

Combustion apparatus having a coaxial-pintle reactant injector

To provide combustion stability in burners over a wide range of flow conditions, a coaxial injector is provided which includes an outer annular sleeve for introduction of one reactant and a hollow pintle with spaced slots for introduction of another reactant to impinge on the first reactant. The slots are staggered in location and size to permit initial interlocking of the reactants and, therefore, increased mixing and improved combustion performance.

Elverum, Jr., Gerard W.↗

Investigation of coaxial jet noise and inlet choking using an F-111A airplane

Measurements of engine noise generated by an F-111A airplane positioned on a thrustmeasuring platform were made at angles of 0 deg to 160 deg from the aircraft heading. Sound power levels, power spectra, and directivity patterns are presented for jet exit velocities between 260 feet per second and 2400 feet per second. The test results indicate that the total acoustic power was proportional to the eighth power of the core jet velocity for core exhaust velocities greater than 300 meters per second (985 feet per second) and that little or no mixing of the core and fan streams occurred. The maximum sideline noise was most accurately predicted by using the average jet velocity for velocities above 300 meters per second (985 feet per second). The acoustic power spectrum was essentially the same for the single jet flow of afterburner operation and the coaxial flow of the nonafterburning condition. By varying the inlet geometry and cowl position, reductions in the sound pressure level of the blade passing frequency on the order of 15 decibels to 25 decibels were observed for inlet Mach numbers of 0.8 to 0.9.

Putnam, T. W.↗

Swirling jet turbulent mixing and combustion computations

Computations are presented describing the mixing and combustion of swirling jets in a coaxial stream. It is demonstrated that the boundary layer equations represent the flow reasonably well until reversed flow is imminent. For the range of parameters investigated indications are that the edge velocity has little effect on the behavior of the flow. Furthermore, confining the flow with a constant pressure wall, or impressing a favorable pressure gradient on the coaxial flow, acts to reduce the severity of the centerline adverse pressure gradient created by the swirl decay. A simple scalar eddy viscosity model, including a potential core formulation, is shown to described the behavior of weak swirling flow in the far region but is only in fair agreement with observations in the near region. The effects of swirl on a burning hydrocarbon jet exhausting into a cold coaxial stream are shown to be intensified by the reduction of the density due to combustion. The enhanced mixing properties of high swirl flow produce rapid diffusion of the burning gases into the cold edge flow causing early cessation of the NO producing reactions. Computations show that doubling the initial jet swirl could reduce the NO production by 25 percent.

Rubel, A.↗

Preliminary investigation of power flow and electrode phenomena in a multi-megawatt coaxial plasma thruster

The present report on preliminary results of theoretical and experimental investigations of power flow in a large, unoptimized, multimegawatt coaxial thruster evaluates the significance of these data for the development of efficient, megawatt-class magnetoplasmadynamic (MPD) thrusters. The good agreement obtained between thruster operational performance and model predictions suggests that ideal MHD processes, including those of a magnetic nozzle, play an important role in coaxial plasma thruster dynamics at power levels relevant to advanced space propulsion. An optimized magnetic nozzle design would aid the development of efficient, multimegawatt MPD thrusters.

Schoenberg, Kurt F.↗

The flow field of an underexpanded H2 jet coaxially injected into a hot free or ducted supersonic jet of air or nitrogen

Experimental data obtained in an investigation of the mixing of an underexpanded hydrogen jet in a supersonic flow both with and without combustion are presented. Tests were conducted in a Mach 2 test stream with both air and nitrogen as test media. Total temperature of the test stream was 2170 K, and static exit pressure was about one atmosphere. The static pressure at the exit of the hydrogen injector's Mach 2 nozzle was about two atmospheres. Primary measurements included shadowgraphs and pitot pressure surveys of the flow field. Pitot surveys and wall static pressures were measured for the case where the entire flow was shrouded. The results are compared to similar experimental data and theoretical predictions for the matched pressure case.

Jenkins, R. V.↗

Low pressure arc electrode

Reducing the pressure in the vicinity of the arc attachment point by allowing the gas to flow through a supersonic nozzle minimizes local heating rates, prevents ablation, and increases the efficiency of coaxial gas-flow arcs.

Lenn, P. D.↗

Jet noise from coaxial nozzles over a wide range of geometric and flow parameters

Free field pure jet noise data were taken for a large range of coaxial nozzle configurations. The core nozzles were circular (1 to 4 in. diam.) and plug types. The fan to core area ratio varied from 0.7 to 43.5, while the velocity ratio typically varied from 0 to 1. For most cases the two nozzles were coplanar but large axial extensions of either nozzle were also tested. Correlation of the data resulted in a simple procedure for estimating ambient temperature subsonic coaxial jet noise spectra over a wide range of geometric and flow parameters.

Olsen, W.↗

Fluid dynamic aspects of jet noise generation

Jet engine noise generation and noise propagation was investigated by studying supersonic nozzle flow of various nozzle configurations in an experimental test facility. The experimental facility was constructed to provide a coaxial axisymmetric jet flow of unheated air. In the test setup, an inner primary flow exhausted from a 7 in. exit diameter convergent--divergent nozzle at Mach 2, while a secondary flow had a 10 in. outside diameter and was sonic at the exit. The large dimensions of the jets permitted probes to be placed inside the jet core without significantly disturbing the flow. Static pressure fluctuations were measured for the flows. The nozzles were designed for shock free (balanced) flow at Mach 2. Data processing techniques and experimental procedures were developed in order to study induced disturbances at the edge of the supersonic flows, and the propagation of those disturbances throughout the flows. Equipment used (specifications are given) to record acoustic levels (far field noise) is described. Results and conclusions are presented and discussed. Diagrams of the jet flow fields are included along with photographs of the test stand.

Barra, V.↗

Preliminary investigation of power flow and electrode phenomena in a multi-megawatt coaxial plasma thruster

This paper summarizes preliminary experimental and theoretical research that was directed towards the study of quasisteady-state power flow in a large, un-optimized, multi-megawatt coaxial plasma thruster. The report addresses large coaxial thruster operation and includes evaluation and interpretation of the experimental results with a view to the development of efficient, steady-state megawatt-class magnetoplasmadynamic (MPD) thrusters.

Schoenberg, Kurt↗

Valve effectively controls amount of contaminant in flow stream

Contaminant valve with a coaxial groove rotor uniformly deposits contaminant into a flow stream under full pressure and flow conditions. The valve tests filters and filter elements of hydraulic oil, fuel, or lubricant systems without any detrimental effect on the performance.

Schnitzer, T. E.↗