Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONSUMABLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Engineering of Methane Metabolism in Pichia Pastoris Through Methane Monooxygenase Expression

Exploration of the solar system is constrained by the cost of moving mass off Earth. Producing materials in situ will reduce the mass that must be delivered from earth. CO2 is abundant on Mars and manned spacecraft. On the ISS, NASA reacts excess CO2 with H2 to generate CH4 and H2O using the Sabatier System. The resulting water is recovered into the ISS, but the methane is vented to space. Thus, there is a capability need for systems that convert methane into valuable materials. Methanotrophic bacteria consume methane but these are poor synthetic biology platforms. Thus, there is a knowledge gap in utilizing methane in a robust and flexible synthetic biology platform. The yeast Pichia pastoris is a refined microbial factory that is used widely by industry because it efficiently secretes products. Pichia could produce a variety of useful products in space. Pichia does not consume methane but robustly consumes methanol, which is one enzymatic step removed from methane. Our goal is to engineer Pichia to consume methane thereby creating a powerful methane-consuming microbial factory.

Methane↗

A Decision-Support Model for Selecting Additive Manufacturing Versus Subtractive Manufacturing Based on Energy Consumption

This paper presents a simple computational model for determining whether additive manufacturing or subtractive manufacturing is more energy efficient for production of a given metallic part. The key discriminating variable is the fraction of the bounding envelope that contains material – i.e. the volume fraction of solid material. For both the additive process and the subtractive process, the total energy associated with the production of a part is defined in terms of the volume fraction of that part. The critical volume fraction is that for which the energy consumed by subtractive manufacturing equals the energy consumed by additive manufacturing. For volume fractions less than the critical value, additive manufacturing is more energy efficient. For volume fractions greater than the critical value, subtractive manufacturing is more efficient. The model considers the entire manufacturing lifecycle – from production and transport of feedstock material through processing to return of post-production scrap for recycling. Energy consumed by processing equipment while idle is also accounted for in the model. Although the individual energy components in the model are identified and accounted for in the expressions for additive and subtractive manufacturing, values for many of these components may not be currently available. Energy values for some materials’ production and subtractive and additive manufacturing processes can be found in the literature. However, since many of these data are reported for a very specific application, it may be difficult, if not impossible, to reliably apply these data to new process-material manufacturing scenarios since, very often, insufficient information is provided to enable extrapolation to broader use. Consequently, this paper also highlights the need to develop improved knowledge of the energy embodied in each phase of the manufacturing process. To be most valuable, users of the model should determine the energy consumed by their manufacturing process equipment on the basis of energy-per-unit-volume of production for each material of interest – considering both alloy composition and form. Energy consumed during machine idle per unit time should also be determined by the user then scaled to specific processing scenarios. Energy required to generate feedstock material (billet, plate, bar, wire, powder) must be obtained from suppliers.

J K Watson↗

New Frontiers in Synthetic Biology for Spaceflight

Exploration of the solar system is constrained by the cost of moving mass off Earth. Producing materials in situ will reduce the mass that must be delivered from earth. CO2 is abundant on Mars and manned spacecraft. On the ISS, NASA reacts excess CO2 with H2 to generate CH4 and H2O using the Sabatier System. The resulting water is recovered into the ISS, but the methane is vented to space. Thus, there is a capability need for systems that convert methane into valuable materials. Methanotrophic bacteria consume methane but these are poor synthetic biology platforms. Thus, there is a knowledge gap in utilizing methane in a robust and flexible synthetic biology platform. The yeast Pichia pastoris is a refined microbial factory that is used widely by industry because it efficiently secretes products. Pichia could produce a variety of useful products in space. Pichia does not consume methane but robustly consumes methanol, which is one enzymatic step removed from methane. Our goal is to engineer Pichia to consume methane thereby creating a powerful methane-consuming microbial factory.

methane↗

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

behavioral health↗

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

countermeasure↗

Dry film lubricants

The Space Age has necessitated accelerated development of many technologies which have direct application to commercial, earthbound hardware. One striking example is dry film lubrication. The stimulus for the development of dry film lubricants was provided by the unsatisfactory condition created when commercial liquid lubricants were exposed to the multiple environs of space. In the search for a satisfactory solution to lubrication in space, dry films were investigated. The dry film lubrication concept has proven most desirable for space, and a natural fallout is the potential shown by such films for consumer item application. On the acceptance that the coefficient of friction of dry films is not equivalent to that of a liquid lubricant under ideal conditions, this paper discusses how the ideal condition for liquid lubrication is rarely achieved in practical applications. Comparisons are made between the performance of dry film and liquid lubricants as a function of temperature, environmental pressure, and life. Furthermore, consideration is given to the comparative costs of liquid versus dry film lubricants to show the practicality and desirability of dry film lubrication to consumer items. Although no data on the performance of consumer items lubricated with dry films are presented, the comparisons clearly establish the potential of dry film lubricants in a competitive consumer market.

SOLID LUBRICANT↗

Apollo/Soyuz test project operational data book. Volume 2: ASTP mass properties data book

Spacecraft mass properties data are provided for use in mission planning, trajectory documentation, mission simulations, and consumable loading. Spacecraft for use in determining locations of spacecraft components and the relationship to coordinate systems in the launch and docked configuration. Mass properties and consumable loading data for the ASTP mission are included along with consumables mass property data and mission independent consumable loading information for the CSM and DM.

Source record↗

Influence of technology on magnetic tape storage device characteristics

There are available today many data storage devices that serve the diverse application requirements of the consumer, professional entertainment, and computer data processing industries. Storage technologies include semiconductors, several varieties of optical disk, optical tape, magnetic disk, and many varieties of magnetic tape. In some cases, devices are developed with specific characteristics to meet specification requirements. In other cases, an existing storage device is modified and adapted to a different application. For magnetic tape storage devices, examples of the former case are 3480/3490 and QIC device types developed for the high end and low end segments of the data processing industry respectively, VHS, Beta, and 8 mm formats developed for consumer video applications, and D-1, D-2, D-3 formats developed for professional video applications. Examples of modified and adapted devices include 4 mm, 8 mm, 12.7 mm and 19 mm computer data storage devices derived from consumer and professional audio and video applications. With the conversion of the consumer and professional entertainment industries from analog to digital storage and signal processing, there have been increasing references to the 'convergence' of the computer data processing and entertainment industry technologies. There has yet to be seen, however, any evidence of convergence of data storage device types. There are several reasons for this. The diversity of application requirements results in varying degrees of importance for each of the tape storage characteristics.

Gniewek, John J.↗

A decision support system for delivering optimal quality peach and tomato

Several studies have indicated that color and firmness are the two quality attributes most important to consumers in making purchasing decisions of fresh peaches and tomatoes. However, at present, retail produce managers do not have the proper information for handling fresh produce so it has the most appealing color and firmness when it reaches the consumer. This information should help them predict the consumer color and firmness perception and preference for produce from various storage conditions. Since 1987, for 'Redglobe' peach and 'Sunny' tomato, we have been generating information about their physical quality attributes (firmness and color) and their corresponding consumer sensory scores. This article reports on our current progress toward the goal of integrating such information into a model-based decision support system for retail level managers in handling fresh peaches and tomatoes.

Thai, C. N.↗

Oxidation of Carbon Fibers in a Cracked Ceramic Matrix Composite Modeled as a Function of Temperature

The oxidation model simulates the oxidation of the reinforcing carbon fibers within a ceramic matrix composite material containing as-fabricated microcracks. The physics-based oxidation model uses theoretically and experimentally determined variables as input for the model. The model simulates the ingress of oxygen through microcracks into a two-dimensional plane within the composite material. Model input includes temperature, oxygen concentration, the reaction rate constant, the diffusion coefficient, and the crack opening width as a function of the mechanical and thermal loads. The model is run in an iterative process for a two-dimensional grid system in which oxygen diffuses through the porous and cracked regions of the material and reacts with carbon in short time steps. The model allows the local oxygen concentrations and carbon volumes from the edge to the interior of the composite to be determined over time. Oxidation damage predicted by the model was compared with that observed from microstructural analysis of experimentally tested composite material to validate the model for two temperatures of interest. When the model is run for low-temperature conditions, the kinetics are reaction controlled. Carbon and oxygen reactions occur relatively slowly. Therefore, oxygen can bypass the carbon near the outer edge and diffuse into the interior so that it saturates the entire composite at relatively high concentrations. The kinetics are limited by the reaction rate between carbon and oxygen. This results in an interior that has high local concentrations of oxygen and a similar amount of consumed carbon throughout the cross section. When the model is run for high-temperature conditions, the kinetics are diffusion controlled. Carbon and oxygen reactions occur very quickly. The carbon consumes oxygen as soon as it is supplied. The kinetics are limited by the relatively slow rate at which oxygen is supplied in comparison to the relatively fast rate at which carbon and oxygen reactions occur. This results in a sharp gradient in oxygen concentration from the edge where it is supplied to the nearest source of carbon, which is where the oxygen is quickly consumed. A moving reaction front is seen in which the outlaying carbon is consumed before the next inner layer of carbon begins to react.

Halbig, Michael C.↗

High Altitude Long Endurance Air Vehicle Analysis of Alternatives and Technology Requirements Development

The objective of this study was to develop a variety of High Altitude Long Endurance (HALE) Unmanned Aerial Vehicle (UAV) conceptual designs for two operationally useful missions (hurricane science and communications relay) and compare their performance and cost characteristics. Sixteen potential HALE UAV configurations were initially developed, including heavier-than-air (HTA) and lighter-than-air (LTA) concepts with both consumable fuel and solar regenerative (SR) propulsion systems. Through an Analysis of Alternatives (AoA) down select process, the two leading consumable fuel configurations (one each from the HTA and LTA alternatives) and an HTA SR configuration were selected for further analysis. Cost effectiveness analysis of the consumable fuel configurations revealed that simply maximizing vehicle endurance can lead to a sub-optimum system solution. An LTA concept with a hybrid propulsion system (solar arrays and a hydrogen-air proton exchange membrane fuel cell) was found to have the best mission performance; however, an HTA diesel-fueled wing-body-tail configuration emerged as the preferred consumable fuel concept because of the large size and technical risk of the LTA concept. The baseline missions could not be performed by even the best HTA SR concept. Mission and SR technology trade studies were conducted to enhance understanding of the potential capabilities of such a vehicle. With near-term technology SR-powered HTA vehicles are limited to operation in favorable solar conditions, such as the long days and short nights of summer at higher latitudes. Energy storage system specific energy and solar cell efficiency were found to be the key technology areas for enhancing HTA SR performance.

Nickol, Craig L.↗

Crew Health and Performance Improvements with Reduced Carbon Dioxide Levels and the Resource Impact to Accomplish Those Reductions

Carbon dioxide (CO2) removal is one of the primary functions of the International Space Station (ISS) atmosphere revitalization systems. Primary CO2 removal is via the ISS s two Carbon Dioxide Removal Assemblies (CDRAs) and the Russian carbon dioxide removal assembly (Vozdukh); both of these systems are regenerable, meaning that their CO2 removal capacity theoretically remains constant as long as the system is operating. Contingency CO2 removal capability is provided by lithium hydroxide (LiOH) canisters, which are consumable, meaning that their CO2 removal capability disappears once the resource is used. With the advent of 6 crew ISS operations, experience showing that CDRA failures are not uncommon, and anecdotal association of crew symptoms with CO2 values just above 4 mmHg, the question arises: How much lower do we keep CO2 levels to minimize the risk to crew health and performance, and what will the operational cost to the CDRAs be to do it? The primary crew health concerns center on the interaction of increased intracranial pressure from fluid shifts and the increased intracranial blood flow induced by CO2. Typical acute symptoms include headache, minor visual disturbances, and subtle behavioral changes. The historical database of CO2 exposures since the beginning of ISS operations has been compared to the incidence of crew symptoms reported in private medical conferences. We have used this database in an attempt to establish an association between the CO2 levels and the risk of crew symptoms. This comparison will answer the question of the level needed to protect the crew from acute effects. As for the second part of the question, operation of the ISS s regenerable CO2 removal capability reduces the limited life of constituent parts. It also consumes limited electrical power and thermal control resources. Operation of consumable CO2 removal capability (LiOH) uses finite consumable materials, which must be replenished in the long term. Therefore, increased CO2 removal means increased resource use, with increased logistical capability to maintain necessary resources on board ISS. We must strike a balance between sufficiently low CO2 levels to maintain crew health and CO2 levels which are operationally feasible for the ISS program

James, John T.↗

DIP: Digital Information Platform

The third DIP workshop’s topic is DIP for Flight Operators and Consumers. Participants will receive insight the consumer onboarding process and steps to take to consume from the platform. Showcase demos will be provided covering data integration services, data analytics using ML/AI technologies, and Collaborative Digital Decision Reroute (CDDR) capabilities. More details on service performance metrics will be discussed as well as updates on the technical development plan and schedule. Participants interested in consuming DIP services are highly encouraged to attend this workshop and provide feedback.

ATM-X↗

A Decision Support System for Extravehicular Operations Under Significant Communication Latency

Within the next few decades, humanity hopes to perform extravehicular activities (EVAs) on the surface of Mars; however, several technical and operational challenges must first be overcome. Foremost among these challenges is managing a significant two-way communication latency between Earth and Mars. Current and historical paradigms of EVA operations have required near-real-time communication between the crewmember(s) performing an EVA and an Earth-based mission control. Next-generation operational paradigms for supporting deep space exploration will necessitate a distributed decision authority system, including delayed Earth-based mission control, the on-planet extravehicular crewmember(s), and intermediate mission support from intravehicular crewmember(s) within real-time communication range. This latter group is of particular interest: they must provide operations support without the plentiful resources available to mission control on Earth. For this purpose, NASA is developing the Personalized EVA Informatics and Decision Support (PersEIDS) software platform. PersEIDS is designed to bolster operator situational awareness and offload operator workload by automating the tracking and projection of consumables usage over an EVA timeline, providing real-time probabilistic safety assessments of an EVA timeline given consumables constraints, and recommending alternative EVA timeline(s) when the active timeline is not expected to be completed under consumables limits. The PersEIDS concept of operations, use cases, and models will be presented. A limited version of PersEIDS was demonstrated during a three-day-long study where each day a roughly four-hour-long simulated Martian EVA was performed in virtual reality at the NASA Johnson Space Center. The first day was a control trial without PersEIDS support; the second and third days represented different levels of decision support provided by PersEIDS to the intravehicular crewmember acting as mission control. With PersEIDS support, the IV crewmember was able to manage the mission to completion faster and with more remaining consumables; however, additional testing is required to understand confounding factors, e.g. training bias.

Mars↗

NASA's Habitation Development Status: Current Concepts and ISRU Opportunities

Introduction: The National Aeronautics and Space Administration (NASA) is embarking on a bold journey to return humankind to the Moon and onward to Mars with innovative commercial, international, and academic partnerships [1]. Under the Artemis series of missions, NASA seeks to establish sustained human exploration of deep space through an objectives-based approach [2]. This approach drives the identification of needed system functionality and the current and future capabilities which will eventually allow humanity to sustainably live beyond Earth. Providing evolvable and scalable habitation is a cornerstone function that calls for the collection and integration of current, developmental, and future technologies that can meet near-term exploration needs while growing into long-term sustained presence. NASA is advancing in-space habitation through its Next Space Technologies for Exploration Partnerships (NextSTEP) model while designing lunar, Mars transit, and Mars surface habitat government reference concepts for Artemis missions. These efforts have unveiled possible near-term opportunities for the in-space resource utilization community if human habitation is considered a future customer of space resources. NextSTEP Habitation Development: NASA is closely working with commercial partners under its NextSTEP Appendix A model to advance habitation systems in the arena of inflatable and composite habitation structures. Such efforts promise efficiencies in volumetric packaging and overall spacecraft mass respectively. Recent testing by commercial partners have helped to quantify possible failure mechanisms for inflatable structures while advancing their technology towards eventual flight certification. The advancement of such Class II habitation structures, in which the habitat is only fully deployed once in-space or on a planetary surface [3], is critical to providing increased habitable volume for long-duration missions with no additional mass penalties. The progression of such technology is infused into NASA’s government reference concepts for notional deep space habitation concepts. Current Government Reference Concepts: To best inform the formulation of future collaborative solicitations, NASA employs the practice of internally developing reference concepts for future exploration elements. These concepts aid in identifying the functions and capabilities needed to complete NASA missions as well as feasible solutions within the timeframe needed. Government reference concepts for a lunar Surface Habitat, Mars Transit Habitat, and Mars Sur-face Habitat are continuously being developed and updated to better guide the Agency’s overall exploration architecture. Lunar Surface Habitat. As NASA returns to the Moon, it is evaluating possible lunar surface habitation concepts. The Surface Habitat (SH) reference concept entails a hybrid metallic-inflatable structure capable of initially housing two crew for surface stays of up to 30 days in duration [4]. While initial missions may span ~7 days in duration, consideration is being given to expanding SH’s capability to support a crew of four for up to 60 days over its 15-year design life [5]. Functionally, the SH serves as a ‘hub’ for all Artemis crewed surface operations, providing internal volume for maintenance, medical, logistics, science utilization, and extravehicular activity (EVA) support in addition to core habitation functionality such as environmental control and life support (ECLS) and power generation and distribution among many others. Additionally, NASA has entered a study agreement with the Italian Space Agency (Agenzia Spaziale Italiana – ASI) to investigation a possible Multi-Purpose Habitat (MPH) as an additional or augmenting habit-able element for the lunar surface [6]. Mars Transit Habitat. NASA’s current architectural concept for initial human missions to Mars entails the utilization of a transit habitat (TH) to transport a four-person crew to and from Mars orbit, departing from and returning to a lunar near-rectilinear halo orbit (NRHO), over the course of a ~1,200-day mission [5]. While holding a similar 15-year design lifetime, TH will also support a series of analog mission activities in NRHO to gradually test the systems and interaction with lunar surface elements, some of which may be adapted for Mars surface exploration. Holding similar functional capabilities as SH, TH is sized to support much longer durations in space and greater logistical independence. Mars Surface Habitat. NASA is still exploring the concept of operations for initial crewed missions to Mars. As such, the Mars Surface Habitat (MSH) concept is still in its infancy as options for mobile, pressurized habitation and stationary habitats are being explored. It is expected MSH will leverage heavily from the lunar SH and possible lunar pressurized rover, however the very different Martian environment will likely necessitate modifications. ISRU Opportunities: Despite the advancements under NASA’s NextSTEP habitation work and continually optimized reference concepts, NASA is facing near-term mass and power challenges that may create opportunities to the ISRU community by providing yet another possible customer for space resources. While NASA desires to use regenerative ECLS systems (ECLSS) for all habitation concepts, their operation comes with initial mass penalties and maintenance overheads when compared to simpler open-loop architectures. Because of this, NASA is currently pro-posing an open-loop, consumables-based architecture for its surface habitats to achieve initial launch and delivery lander mass targets while scarring for the in-corporation of regenerative ECLSS to meet longer mission durations and sustained presence. With such an architecture, oxygen and potable water are needed consumables, which initial ISRU systems may be able to provide in a pilot capacity. Although the TH is expecting to utilize regenerative ECLSS, advancements in lunar surface-based ISRU and possible re-supply of spacecraft in lunar or Mars orbit could significantly reduce the logistical need for ECLSS related spares on TH and possibly allow a similar open-loop and consumables-based architecture. Table 1 Notional ECLSS consumables per mission use for SH and TH [5]. SH (28-day) Open Loop: Water (kg) 288 | Oxygen (kg) 30 TH (1110-day) Closed-Loop: Water (kg) 182 | Oxygen (kg) 123 In addition to ECLSS mass concerns, the SH is facing challenges with energy storage to support operations over periods of darkness exceeding 100 hours. Both battery and fuel cell-based power architectures are being traded, opening options for external power generation and energy storage. One possibility is ISRU-produced H2 and O2 feeding external primary fuel cell systems which could supplement habitation power generation while reducing initial mass and volume until much more powerful fission power systems might be deployed. Conclusion: Significant advancements are being made in evolvable habitation concepts that span from near-term technologies, such as inflatable structures under NextSTEP, to potentially revolutionary capabilities like the lunar surface construction as funded through the Moon-to-Mars Planetary Autonomous Construction Technologies (MMPACT) project [7]. As NASA investigates both heritage capabilities and rap-idly advancing, disruptive technologies, there are likely many near-term opportunities for initial ISRU capabilities to significantly aid human habitation and increase self-sufficiency beyond Earth.

habitation↗

Problems with the process partitioning theory of stratocumulus entrainment

Three different approaches to partitioning were proposed. Ball (1960), Lilly (1968), and Deardorff et al. (1969, 1974) considered the sign of the net buoyancy flux at each level. If the net flux is positive, it is counted as TKE producing; otherwise, it is counted as TKE consuming. This approach can be called Eulerian partitioning. The second approach can be called process partitioning. It is assumed that the various processes acting in concert each produce and consume the same energy as if they acted independently (Manins and Turner, 1978). The total rates of TKE production and consumption are obtained by summing the effects of all the forcing processes. The third approach is Lagrangian partitioning. Each air parcel is considered as either producing or consuming TKE, according to the sign of the product of its density and vertical velocity anomalies. Stage and Businger (1981a,b) have applied process partitioning to the cloud topped mixed layer. One of the most important processes influencing entrainment into such a layer is cloud top radiative cooling. The production and consumption due to entrainment and radiative cooling are thus closely related. Model results are sensitive to the choice of formulation.

Randall, D. A.↗

Fault-free performance validation of fault-tolerant multiprocessors

A validation methodology for testing the performance of fault-tolerant computer systems was developed and applied to the Fault-Tolerant Multiprocessor (FTMP) at NASA-Langley's AIRLAB facility. This methodology was claimed to be general enough to apply to any ultrareliable computer system. The goal of this research was to extend the validation methodology and to demonstrate the robustness of the validation methodology by its more extensive application to NASA's Fault-Tolerant Multiprocessor System (FTMP) and to the Software Implemented Fault-Tolerance (SIFT) Computer System. Furthermore, the performance of these two multiprocessors was compared by conducting similar experiments. An analysis of the results shows high level language instruction execution times for both SIFT and FTMP were consistent and predictable, with SIFT having greater throughput. At the operating system level, FTMP consumes 60% of the throughput for its real-time dispatcher and 5% on fault-handling tasks. In contrast, SIFT consumes 16% of its throughput for the dispatcher, but consumes 66% in fault-handling software overhead.

Czeck, Edward W.↗

Electronic neural network for dynamic resource allocation

A VLSI implementable neural network architecture for dynamic assignment is presented. The resource allocation problems involve assigning members of one set (e.g. resources) to those of another (e.g. consumers) such that the global 'cost' of the associations is minimized. The network consists of a matrix of sigmoidal processing elements (neurons), where the rows of the matrix represent resources and columns represent consumers. Unlike previous neural implementations, however, association costs are applied directly to the neurons, reducing connectivity of the network to VLSI-compatible 0 (number of neurons). Each row (and column) has an additional neuron associated with it to independently oversee activations of all the neurons in each row (and each column), providing a programmable 'k-winner-take-all' function. This function simultaneously enforces blocking (excitatory/inhibitory) constraints during convergence to control the number of active elements in each row and column within desired boundary conditions. Simulations show that the network, when implemented in fully parallel VLSI hardware, offers optimal (or near-optimal) solutions within only a fraction of a millisecond, for problems up to 128 resources and 128 consumers, orders of magnitude faster than conventional computing or heuristic search methods.

Thakoor, A. P.↗