Search NASA⌕ Search

SEARCH · Search NASA

Results for “CRYSTAL LATTICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Role of Dimethylammonium in Bandgap Modulation for Stable Halide Perovskites

Halide perovskites with bandgaps of 1.70–1.85 eV are of interest for multijunction photovoltaics. Mixing halides on the X site of the ABX3-structured perovskite system is a common way to reach these bandgaps, but this method introduces phase segregation pathways, limiting photovoltage. Recently, a new strategy for increasing the bandgap has been introduced, where cations normally too large to fit into the lattice, but compensated by smaller cations, are substituted on the A site. The mechanism underlying the increase of the bandgap with this strategy remained an open question. Here, we show that by partial substitution of the large dimethylammonium (DMA) cation at the A site of FA x Cs 1–x PbI y Br 3–y perovskites, a bandgap increase is observed not only when DMA is compensated by smaller Cs cations but also when only DMA is added, which is accompanied by an expansion of the crystal lattice. Our experimental findings suggest that adding DMA is causing an unexpected tilt in the perovskite octahedra, increasing the bandgap. Efficient solar cells based on 1.73 eV DMA-incorporated materials are extremely stable, retaining 96% of their original efficiency over 2200 h at 85 °C in the dark and 92% of their original efficiency after operation at 60 °C for 500 h. Finally, this octahedral tilting strategy is a promising route for attaining efficient and stable wide bandgap perovskite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Studies of the Swelling by an Electrolyte in Electrochemical Doping of Ethylene Glycol-Substituted Polythiophene

Organic mixed ionic electronic conductors (OMIECs) have the potential to enable diverse new technologies, ranging from biosensors to flexible energy storage devices and neuromorphic computing platforms. However, a study of these materials in their operating state, which convolves both passive and potential-driven solvent, cation, and anion ingress, is extremely difficult, inhibiting rational material design. In this report, we present a novel approach to the in situ studies of the electrochemical switching of a prototypical OMIEC based on oligoethylene glycol (oEG) substitution of semicrystalline regioregular polythiophene via grazing-incidence X-ray scattering. Here by studying the crystal lattice both dry and in contact with the electrolyte while maintaining potential control, we can directly observe the evolution of the crystalline domains and their relationship to film performance in an electrochemically gated transistor. Despite the oEG side-chain enabling bulk electrolyte uptake, we find that the crystalline regions are relatively hydrophobic, exhibiting little (less than one water per thiophene) swelling of the undoped polymer, suggesting that the amorphous regions dominate the reported passive swelling behavior. With applied potential, we observe that the π–π separation in the crystals contracts while the lamella spacing increases in a balanced fashion, resulting in a negligible change in the crystal volume. The potential-induced changes in the crystal structure do not clearly correlate to the electrical performance of the film as an organic electrochemical transistor, suggesting that the transistor performance is strongly influenced by the amorphous regions of the film.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of ionic disorder on the principal shock Hugoniot

Here, the effect of ionic disorder on the principal Hugoniot is investigated using multiple scattering theory to very high pressure (Gbar). Calculations using molecular dynamics to simulate ionic disorder are compared to those with a fixed crystal lattice, for both carbon and aluminum. For the range of conditions considered here we find that ionic disorder has a relatively minor influence. It is most important at the onset of shell ionization and we find that, at higher pressures, the subtle effect of the ionic environment is overwhelmed by the larger number of ionized electrons with higher thermal energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Lattice dynamics, sound velocities, and atomic environments of szomolnokite at high pressure

Complex mixtures of sulfates, silicates, and ice have been observed in a variety of planetary environments on Earth, Mars and the icy satellites of the solar system. Characterizing the properties of the corresponding compositional endmembers is important for understanding the interiors of a range of planetary bodies in which these phases are observed. To measure the electronic and vibrational properties of the pure ferrous iron endmember of the kieserite group, szomolnokite, (FeSO 4 ∙H 2 O), we have performed synchrotron 57 Fe nuclear resonant inelastic and forward scattering experiments in the diamond-anvil cell up to 14.5 GPa. This pressure range covers depths within Earth’s interior relevant to sulfur cycling in subduction zones and the range of pressures expected within icy satellite interiors. We find evidence of crystal lattice softening, changes in elastic properties, and changes in the electric field gradients of iron atoms associated with two structural transitions occurring within the experimental pressure range. Here we apply these findings to icy satellite interiors, including discussion of elastic properties, modeling of ice-sulfate aggregates, and implications for tidal observations.

58 GEOSCIENCES↗
DOE OSTI2024

Torsional force microscopy of van der Waals moirés and atomic lattices

In a stack of atomically thin van der Waals layers, introducing interlayer twist creates a moiré superlattice whose period is a function of twist angle. Changes in that twist angle of even hundredths of a degree can dramatically transform the system’s electronic properties. Setting a precise and uniform twist angle for a stack remains difficult; hence, determining that twist angle and mapping its spatial variation is very important. Techniques have emerged to do this by imaging the moiré, but most of these require sophisticated infrastructure, time-consuming sample preparation beyond stack synthesis, or both. In this work, we show that torsional force microscopy (TFM), a scanning probe technique sensitive to dynamic friction, can reveal surface and shallow subsurface structure of van der Waals stacks on multiple length scales: the moirés formed between bi-layers of graphene and between graphene and hexagonal boron nitride (hBN) and also the atomic crystal lattices of graphene and hBN. In TFM, torsional motion of an Atomic Force Microscope (AFM) cantilever is monitored as it is actively driven at a torsional resonance while a feedback loop maintains contact at a set force with the sample surface. TFM works at room temperature in air, with no need for an electrical bias between the tip and the sample, making it applicable to a wide array of samples. It should enable determination of precise structural information including twist angles and strain in moiré superlattices and crystallographic orientation of van der Waals flakes to support predictable moiré heterostructure fabrication.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Multiphonon diffuse scattering in solids from first principles: Application to layered crystals and two-dimensional materials

Time-resolved diffuse scattering experiments have gained increasing attention due to their potential to reveal nonequilibrium dynamics of crystal lattice vibrations with full momentum resolution. Although progress has been made in interpreting experimental data on the basis of one-phonon scattering, understanding the role of individual phonons can be sometimes hindered by multiphonon excitations. In Ref. [M. Zacharias, H. Seiler, F. Caruso, D. Zahn, F. Giustino, P. C. Kelires, and R. Ernstorfer, Phys. Rev. Lett. 127, 207401 (2021)], we have introduced a rigorous approach for the calculation of the all-phonon inelastic scattering intensity of solids from first-principles. In the present work, we describe our implementation in detail and show that multiphonon interactions are captured efficiently by exploiting translational and time-reversal symmetries of the crystal. We demonstrate its predictive power by calculating the scattering patterns of monolayer molybdenum disulfide (MoS 2 ), bulk MoS 2 , and black phosphorus (bP), and we obtain excellent agreement with our measurements of thermal electron diffuse scattering. Remarkably, our results show that multiphonon excitations dominate in bP across multiple Brillouin zones, while in MoS 2 they play a less pronounced role. We expand our analysis for each system and examine the effect of individual atomic and interatomic vibrational motion on the diffuse scattering signals. We further demonstrate the high-throughput capability of our approach by reporting all-phonon scattering maps of two-dimensional MoSe 2 , WSe 2 , WS 2 , graphene, and CdI 2 , rationalizing in each case the effect of multiphonon processes. As a side point, we show that the special displacement method reproduces the thermally distorted configuration that generates precisely the all-phonon diffuse pattern. In conclusion, the present methodology opens the way for systematic calculations of the scattering intensity in crystals and the accurate interpretation of static and time-resolved inelastic scattering experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Emergent flat band and topological Kondo semimetal driven by orbital-selective correlations

Flat electronic bands are expected to show proportionally enhanced electron correlations, which may generate a plethora of novel quantum phases and unusual low-energy excitations. They are increasingly being pursued in d-electron-based systems with crystalline lattices that feature destructive electronic interference, where they are often topological. Such flat bands, though, are generically located far away from the Fermi energy, which limits their capacity to partake in the low-energy physics. Here we show that electron correlations produce emergent flat bands that are pinned to the Fermi energy. We demonstrate this effect within a Hubbard model, in the regime described by Wannier orbitals where an effective Kondo description arises through orbital-selective Mott correlations. Moreover, the correlation effect cooperates with symmetry constraints to produce a topological Kondo semimetal. Our results motivate a novel design principle for Weyl Kondo semimetals in a new setting, viz.d-electron-based materials on suitable crystal lattices, and uncover interconnections among seemingly disparate systems that may inspire fresh understandings and realizations of correlated topological effects in quantum materials and beyond.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Cyclic versus Linear Alkylammonium Cations: Preventing Phase Transitions at Operational Temperatures in 2D Perovskites

Two-dimensional lead halide perovskites offer numerous attractive features for optoelectronics owing to their soft, deformable lattices and high degree of chemical tunability. While alteration of the metal and halide ions gives rise to significant modification of the bandgap energy, the organic spacer cations offer in-roads to tuning phase behavior and more subtle functionalities in ways that remain to be understood. Here, we study six variations of 2D perovskites changing only the organic spacer cations and demonstrate that these components intrinsically impact material response in important ways such as altering crystallographic structure, temperature-induced phase transitions, and photoluminescence emission. Two-dimensional perovskites containing commonly utilized aliphatic linear spacers, such as butylammonium, undergo phase transitions near room temperature. These transitions and temperature changes induce spacer-dependent variations in the emission spectra. Conversely, 2D perovskites comprising cyclic aliphatic spacers, such as cyclobutylammonium, are found to lack first-order phase transitions. These cyclic molecules are more sterically hindered within the crystal lattice, leading to temperature-induced contraction or expansion along certain crystallographic planes but no other significant thermal effects; additionally, they undergo changes in their emission spectra that cannot be explained by simple thermal expansion. Finally, given the similarities in the dielectric and chemical makeup of this set of six alkylammonium molecules, these results are unexpected and suggest a large structural and thermal phase space via spacer manipulation that could lead to improved 2D perovskite functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Mechanistic Understanding of Nonclassical Crystal Growth in Hydrothermally Synthesized Sodium Yttrium Fluoride Nanowires

Sodium yttrium fluoride (NaYF 4 ) is an important upconverting material with many potential uses in chemistry, materials science, and biology, which can be synthesized hydrothermally in both cubic (α) and hexagonal (β) crystallographic polymorphs. Understanding the mechanisms underlying the phase conversion between the cubic and hexagonal polymorphs is of great interest to help inform future synthetic efforts, for example in the design of atomically precise quantum materials with well-defined sizes and morphologies. In this work, we use a combination of analytical transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), powder X-ray diffraction (XRD), in situ liquid cell TEM, atom probe tomography (APT), and extended X-ray absorption fine structure (EXAFS) measurements to show that the hexagonal NaYF 4 nanowires form through a nonclassical crystal growth mechanism involving the formation and subsequent oriented attachment of mesocrystals consisting of cubic (α) phase units. Additionally, EXAFS measurements suggest that substitutional Yb 3+ point defects within NaYF 4 are distributed evenly throughout the crystal lattice without clustering and also that they may exhibit selective substitution into one of the two possible trivalent yttrium sites in the unit cell for hydrothermally synthesized β-NaYF 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

New Insights into Structural Evolution of LiNiO 2 Revealed by Operando Neutron Diffraction

LiNiO 2 (LNO) represents the end member in the compositional space of the LiNi 1-x-y Mn x Co y O 2 (as x and y approach zero) cathode system. Despite its high theoretical specific capacity (275 mAh/g), LNO suffers from phase transitions with large volume change and unfavorable reactions upon electrochemical cycling, which restricts its practical use in the application of lithium-ion batteries. While the contributing factor to the structural instability is commonly linked to the undesired volume collapse associated with the H2-H3 phase transition, detailed analysis of structural evolution following the entire route of phase transitions (H1-M-H2-H3) in real time under battery operating conditions remains a challenging task. In this work, we employ operando neutron diffraction to study the structural changes (crystal lattice, Li/Ni–O bond length, O–Ni–O bond angles, and LiO 2 /NiO 2 layer thickness) of LNO cathode in a home-built Li x NiO 2 || graphite full cell during Li + de-/intercalation. In particular, the anomalous increase(decrease) of Ni–O(Li–O) bond length at high SOC (>~85 %) in the H3 phase is discussed in the context of O 2- (2p)→Ni 4+ (3d) negative charge transfer.

25 ENERGY STORAGE↗
DOE OSTI2024

Three Distinctive Steps for Heterogeneous Nucleation of Tunnel-Structured Mn Oxide on Quartz under Light Exposure

Natural manganese (Mn) oxide coatings, resulting from the heterogeneous nucleation on foreign substances, have garnered interest based on their importance in the reaction with organic substances and in environmental systems. However, the heterogeneous nucleation of the natural Mn oxide coatings still remains elusive. Here, via fast photochemical oxidation of Mn 2+ (aq), we show that Mn(IV) oxide nuclei form and aggregate on quartz in three distinct successive stages: (i) a nanocrystalline film of unaligned grain forms, (ii) nanoislands develop on the film, and (iii) nanorods form on the nanoislands. Each stage has different crystalline structures and forms by aligned attachment of nanoscale precursors on the preceding surface. Crystal lattice analyses confirm the crystalline development, from the short-range order of the Mn oxide film to the long-range order of the nanorods. Also, the heterogeneous nucleation observed in this work produced groutellite-like tunnel structures of Mn oxide on quartz. Furthermore, this revealed pathway of the heterogeneous nucleation can offer a new perspective on the variety of poorly crystalline structures of natural Mn oxides found in the environment, which can affect elemental redox cycles, contaminant sequestration and removal, and soil carbon storage.

Aligned attachment↗
DOE OSTI2023

Magnetoelastic interactions in SrCu 2 (BO 3 ) 2 studied by Raman scattering experiments and first principles calculations

Dynamic and static crystal lattice properties of SrCu 2 (BO 3 ) 2 are studied by means of Raman scattering, magnetostriction, and thermal expansion measurements in magnetic fields to 45 T. Raman experiments versus temperature reveal that some phonon modes show an unusual behavior: their frequencies soften (modes at 200 and 450 cm –1 ) while others harden (modes at 385 and 478 cm –1 ) when decreasing the temperature below 15 K. Magneto-Raman experiments show that their field dependence correlates with their respective temperature dependencies; e.g., modes that are hardened with increasing temperature also harden with applied magnetic fields and modes that become softer with temperature also soften with applied fields. We use density functional theory to successfully model and compute the energies of these modes, classifying them into two types: pantograph (modes that soften when decreasing the temperature) and nonpantograph. We conclude that the former involves the modification of the intradimer exchange interaction J and the latter the interdimer J'. Lastly, dilatometry is used to correlate field-dependent Raman modes to the closing of the spin gap as well as fractional-magnetization stripe states M = 1/4 M s and M = 1/3 M s , where M s is the saturation magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Emergent Inductance from Chiral Orbital Currents in a Bulk Ferrimagnet

Here, we report the discovery of a new form of inductance in the bulk ferrimagnet Mn 3 ⁢Si 2 ⁢Te 6 , which features strong spin-orbit coupling, large magnetic anisotropy, and pronounced magnetoelastic interactions. Below its Curie temperature (𝑇 𝐶 ≈ 78 K), Mn 3 ⁢Si 2 ⁢Te 6 hosts chiral orbital currents (COC) that circulate within the crystal lattice and give rise to collective electronic behavior [Control of chiral orbital currents in a colossal magnetoresistance material, Nature (London) 611, 467 (2022).]. By applying a magnetic field along the hard 𝑐 axis and driving the system with low-frequency currents, we uncover a giant inductive response up to millhenry scale, originating from first-order reconfigurations of COC domains. These domains act as coherent mesoscopic inductive elements that resist reversal upon current reduction, producing a large electromotive force and sharply increasing voltage. This emergent inductance defies classical models, occurs without superconductivity or engineered nanostructures, and opens a new frontier in orbital-based quantum functionality and device concepts.

complex materials↗
DOE OSTI2020

Tunable magnetic order in low-symmetry SeO 3 ligand linked TM 3 (SeO 3 ) 3 H 2 O ( TM =Mn , Co, and Ni) compounds

The ability to design crystal lattices with specific sublattice geometries has long been sought after especially in the context of harnessing magnetic frustration to elicit emergent physics. One approach which has seen some success recently is to design magnetic sublattices chemically through the use of nonmagnetic linker ligands as scaffolding for the magnetic ions. In this work we report the magnetic properties of one such family of materials, the transition metal (TM) selenite hydrates with chemical formula TM 3 (SeO 3 ) 3 H 2 O. These materials link highly distorted TMO 6 octahedra via nonmagnetic [SeO 3 ] 2+ linkers. Studying members with TM = Mn, Co, and Ni we use magnetic susceptibility and neutron powder diffraction to identify antiferromagnetic order in all three compounds with moderate frustration indexes. A comparison of the magnetic structures suggests that while the overall structure of the SeO 3 scaffolding remains unchanged the TM effects changes in the magnetic properties through tuning the internal bonding parameters and the single-ion physics. Changing from Mn to Co is found to be particularly consequential manifesting changes in both the ordered-moment direction and in the direction of the ordering vector. Field-dependent measurements of the susceptibility and heat capacity reveal metamagnetic transitions in both Mn 3 (SeO 3 ) 3 H 2 O and Co 3 (SeO 3 ) 3 H 2 O indicating nearby magnetic ground states accessible under relatively small applied fields. Density functional theory calculations broadly confirm these results, showing both a sensitivity of the magnetic structure to the TM and its local environment. Although no spin liquid behavior is achieved, these results suggest the fruitfulness of such synthesis philosophies and encourage future work to engender higher frustration in these materials via doping, field, pressure, or larger linker ligands.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tailoring the Redox Reactions for High-Capacity Cycling of Cation-Disordered Rocksalt Cathodes

Cation-disordered rocksalts (DRXs) have emerged as a new class of high-capacity Li-ion cathode materials. One unique advantage of the DRX chemistry is the structural flexibility that substantially lessens the elemental constraints in the crystal lattice, such as Li content, choice of transition metal redox center paired with appropriate d 0 metal, and incorporation of F anion, which allows optimization of the key redox reactions. Herein, a series of the DRX oxyfluorides based on the Mn redox have been designed and synthesized. By tailoring the stoichiometry of the DRX compositions, high-capacity cycling by promoting the cationic Mn 2+ /Mn 4+ redox reactions while suppressing those from anionic O is successfully demonstrated. A highly fluorinated DRX compound, Li 1.2 Mn 0.625 Nb 0.175 O 1.325 F 0.675 (M 0.625 F 0.675 ), delivers a capacity of ≈170 mAh g -1 at C/3 for 100 cycles. Furthermore, this work showcases the concept of balancing the cationic and anionic redox reactions in the DRX cathodes for improved electrochemical performance through the rational composition design.

25 ENERGY STORAGE↗
DOE OSTI2024

Turning Normal to Abnormal: Reversing CO 2 /C2–Hydrocarbon Selectivity in HKUST–1

Metal–organic frameworks (MOFs) can efficiently purify hydrocarbons from CO 2 , but their rapid saturation, driven by preferential hydrocarbon adsorption, requires energy-intensive adsorption–desorption processes. To address these challenges, an innovative approach is developed, enabling control over MOF flexibility through densification and defect engineering, resulting in an intriguing inverse CO 2 /C2 hydrocarbon selectivity. Here, in this study, the densification process induces the shearing of the crystal lattice and contraction of pores in a defective CuBTC MOF. These changes have led to a remarkable transformation in selectivity, where the originally hydrocarbon-selective CuBTC MOF becomes CO 2 -selective. The selectivity values for densified CuBTC are significantly reversed when compared to its powder form, with notable improvements observed in CO 2 /C 2 H 6 (4416 vs 0.61), CO 2 /C 2 H 4 (15 vs 0.28), and CO 2 /C 2 H 2 (4 vs 0.2). The densified material shows impressive separation, regeneration, and recyclability during dynamic breakthrough experiments with complex quinary gas mixtures. Simulation studies indicate faster CO 2 passage through the tetragonal structure of densified CuBTC compared to C 2 H 2 . Experimental kinetic diffusion studies confirm accelerated CO 2 diffusion over hydrocarbons in the densified MOF, attributed to its small pore window and minimal interparticle voids. This research introduces a promising strategy for refining existing and future MOF materials, enhancing their separation performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

La 0.6 Sr 0.4 CoO 3−δ Films Under Deoxygenation: Magnetic And Electronic Transitions Are Apart from The Structural Phase Transition

Abstract Topotactic phase transitions induced by changes in the oxygen vacancy concentration can largely alter the physical properties of complex oxides, including electronic and magnetic phases, while maintaining the structural integrity of the crystal lattice. An oxygen‐vacancy‐induced topotactic phase transition from perovskite (PV) to brownmillerite (BM) is achieved in epitaxial La 0.6 Sr 0.4 CoO 3−δ (LSCO) thin films. Two novel intermediate states with different oxygen content are identified by X‐ray diffraction, which involves a single‐phase reduced PV state and a mixed state of co‐existing PV and BM. The combination of depth‐sensitive polarized neutron reflectometry (PNR) and Rutherford backscattering (RBS) allows a quantitative determination of magnetization and the mean oxygen content in all states, revealing a continuous transition from La 0.6 Sr 0.4 CoO 2.97 to La 0.6 Sr 0.4 CoO 2.5 . BM formation is observed for an LSCO layer with an oxygen content of 2.67, while the magnetic and electronic transition already occurs for a layer with a higher oxygen content of 2.77 (and above) and in the absence of a BM signature. These results demonstrate that the physics of electronic metal‐to‐insulator transition (MIT), magnetic ferromagnet‐to‐non‐ferromagnet transition (FM‐to‐non‐FM), and structural PV‐to‐BM phase transition should be considered within the framework of separate but interrelated processes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Stabilizing Iodine in 2D Mixed Halide Perovskites: Dion–Jacobson Versus Ruddlesden–Popper Phases

Iodine electrochemistry plays an important role in driving iodide‐oxidation induced halide migration in 3D halide perovskites. When subjected to light illumination or electrochemical bias, mixed halide perovskites undergo halide segregation followed by iodine expulsion from the crystal lattices. To mitigate such intrinsic halide ion mobility in 3D perovskites, lower‐dimensional (2D) perovskites are employed as barriers to stabilize the perovskite layers. Interestingly, 2D halide perovskites also exhibit halide ion mobility that is dependent on the binding configuration, viz., Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) phases. Hybrid RP‐DJ perovskites with a mixed Br:I ratio of 50:50 show increased stability following continuous photoirradiation. Spectroscopic studies that probe iodine migration and expulsion in photoirradiated 2D films of different configurations are presented here. The effective strategy of blending two different 2D phases (RP‐DJ) offers new opportunities to develop stable 2D/3D perovskite interfaces in solar cells.

2D halide perovskites↗