Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capillary waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Waves in Radial Gravity Using Magnetic Fluid

We are beginning laboratory experiments using magnetically active ferrofluids to study surface waves in novel geometries. Terrestrial gravity is eliminated from the dynamics, and the magnetic body force felt by ferrofluid in the presence of a magnetic field gradient is used to create a geopotential field which is a section of or an entire sphere or cylinder. New optical, electromagnetic and ultrasonic diagnostic techniques are under development to initially study capillary-gravity wave propagation and interaction in such geometries.

Ohlsen, Daniel R.↗

Scatterometer azimuthal response and wind wave directionality

Azimuthal response of a scatterometer to radiation scattered by the sea surface was studied in a wind-wave tank. The variation of the normalized radar cross section with the azimuth angle is fitted by a three-term series. Results show that the upwind-downwind asymmetry decreases as the wind speed increases. The crosswind modulation depends on the wind velocity. The results show that the evolution of the long-wind-crosswind ratio evolves with wind speed in a manner similar to the evolution of the isotropy of short capillary-gravity waves. The maximum of the isotropy of the short wind waves is obtained for wind velocities close to 4 m/s. For the same value of the velocity, the variations of radar response between long-wind and crosswind directions is minimum. For lower or higher values of wind velocities the directional accuracy of the radar increases, since the wind-wave field tends to align in the wind direction.

Giovanangeli, J. P.↗

In-Situ Observation of the Formation of Laser-Induced Periodic Surface Structures with Extreme Spatial and Temporal Resolution

Irradiation of solid surfaces with intense ultrashort laser pulses represents a unique way of depositing energy into materials. It allows to realize states of extreme electronic excitation and/or very high temperature and pressure and to drive materials close to and beyond fundamental stability limits. As a consequence, structural changes and phase transitions often occur along unusual pathways and under strongly nonequilibrium conditions. Furthermore, due to the inherent multiscale nature—both temporally and spatially—of these irreversible processes, their direct experimental observation requires techniques that combine high temporal resolution with the appropriate spatial resolution and the capability to obtain good quality data on a single pulse/event basis. In this respect, fourth-generation light sources, namely, short wavelength and short pulse free electron lasers (FELs), are offering new and fascinating possibilities. As an example, this chapter will discuss the results of scattering experiments carried out at the FLASH free electron laser at DESY (Hamburg, Germany), which allowed us to resolve laser-induced structure formation at surfaces on the nanometer to submicron length scale and in temporal regimes ranging from picoseconds to several nanoseconds with sub-picosecond resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The mechanics of nucleation and growth and the surface tensions of active matter

Homogeneous nucleation, a textbook transition path for phase transitions, is typically understood on thermodynamic grounds through the prism of classical nucleation theory. However, recent studies have suggested the applicability of classical nucleation theory to systems far from equilibrium. Here, in this article, we formulate a purely mechanical perspective of homogeneous nucleation and growth, elucidating the criteria for the properties of a critical nucleus without appealing to equilibrium notions. Applying this theory to active fluids undergoing motility-induced phase separation, we find that nucleation proceeds in a qualitatively similar fashion to equilibrium systems, with concepts such as the Gibbs–Thomson effect and nucleation barriers remaining valid. We further demonstrate that the recovery of such concepts allows us to extend classical theories of nucleation rates and coarsening dynamics to active systems upon using the mechanically derived definitions of the nucleation barrier and surface tensions. Three distinct surface tensions—the mechanical, capillary, and Ostwald tensions—play a central role in our theory. While these three surface tensions are identical in equilibrium, our work highlights the distinctive role of each tension in the stability of active interfaces and the nucleation and growth of motility-induced phases.

Capillary waves↗

A self-consistent electrostatic electrified shallow water model for charged liquid surface dynamics

The dynamics of an electrified liquid surface are investigated using a shallow water model that is self-consistently coupled with an electrostatic solver. To account for the spatiotemporal variation of a curved liquid surface, the electric field on curved surfaces is calculated by solving a two-dimensional electrostatic equation using the weighted least squares (WLSQ) interpolation method. First, the WLSQ implementation is verified with analytical theory obtained from a Laplace solution assuming a half-cylinder liquid surface profile. Then, the coupled electrified shallow water model is used to study the instability of liquid surface perturbation as a function of the potential drop between an electrode and conducting liquid, surface tension, and gravity. We present a linear dispersion theory of liquid surface instability for long-wavelength perturbations, including the effects of liquid viscosity. Furthermore, the effects of multiple sinusoidal surface perturbations on the electrified liquid surface instability are investigated.

Capillary waves↗

Generation of capillary instabilities by external disturbances in a liquid jet

The receptivity problem in a circular liquid jet is considered. A time harmonic axial pressure gradient is imposed on the steady, parallel flow of a jet of liquid emerging from a circular duct. Using a technique developed in plasma physics a casual solution to the forced problem is obtained over certain ranges of Weber number for a number of mean velocity profiles. This solution contains a term which grows exponentially in the downstream direction and can be identified with a capillary instability wave. Hence, it is found that the externally imposed disturbances can indeed trigger instability waves in a liquid jet. The amplitude of the instability wave generated relative to the amplitude of the forcing is computed numerically for a number of cases.

Leib, S. J.↗

Instability of capillary jets with thermocapillarity

Long axisymmetric liquid zones are subject to axial temperature gradients which induce steady viscous flows driven by thermocapillarity. The approximately parallel flow in a cylindrical zone is examined for linearized instabilities. Capillary, surface-wave and thermal modes are found. Capillary breakup can be retarded or even suppressed for small Prandtl number and large Biot number B, which measures heat transfer from the liquid to the surrounding atmosphere. In the limiting case B approaches infinity the zone becomes an isothermal jet subject to axial 'wind stress' on its interface. It is then possible to suppress capillary breakup entirely so that one can maintain long coherent jets.

Xu, J.-J.↗

Capillary fluctuations of surface steps: An atomistic simulation study for the model Cu(111) system

Molecular dynamics (MD) simulations are employed to investigate the capillary fluctuations of steps on the surface of a model metal system. The fluctuation spectrum, characterized by the wave number ($k$) dependence of the mean squared capillary-wave amplitudes and associated relaxation times, is calculated for $\langle 110 \rangle$ and $\langle 112 \rangle$ steps on the { 111 } surface of elemental copper near the melting temperature of the classical potential model considered. Step stiffnesses are derived from the MD results, yielding values from the largest system sizes of ( 37 ± 1 ) meV / Å for the different line orientations, implying that the stiffness is isotropic within the statistical precision of the calculations. The fluctuation lifetimes are found to vary by approximately four orders of magnitude over the range of wave numbers investigated, displaying a $k$ dependence consistent with kinetics governed by step-edge mediated diffusion. The values for step stiffness derived from these simulations are compared to step free energies for the same system and temperature obtained in a recent MD-based thermodynamic-integration (TI) study [Freitas, Frolov, and Asta, Phys. Rev. B 95, 155444 (2017)]. Results from the capillary-fluctuation analysis and TI calculations yield statistically significant differences that are discussed within the framework of statistical-mechanical theories for configurational contributions to step free energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The coupling of interfacial instabilities and the stabilization of two-layer annular flows

In this paper the stability of annular pressure-driven parallel flows of two liquids sandwiching a free cylindrical interface is considered. For small to moderate Reynolds numbers, the interface is susceptible to capillary and interfacial wave instabilities, the latter instability caused by a jump in viscosity at the interface. It is shown that favorable velocity profiles in both liquids may stabilize capillary breakup of the interface and suppress the axisymmetric interfacial wave instability. A long-wave analysis leads to the physical mechanism responsible for stabilization of capillary breakup. This physical mechanism is a generalization of that by which capillary breakup is stabilized by interfacial shear in an annular film of a single liquid. Stabilization of intermediate wavelengths is studied with a mechanical energy analysis, which leads to a description of the energetic processes at work.

Dijkstra, Henk A.↗

The damping of ocean surface waves by a monomolecular film measured by wave staffs and microwave radars

Open ocean and wave tank experiments were carried out with the aim of studying the damping of capillary and gravity waves by a monomolecular film. These films of biogenic origin influence air-sea interaction processes and thereby affect the use of remote sensing techniques in oceanography. Measurement was carried out by wave staffs, by a coherent X band microwave scatterometer mounted on a sea-based platform, and by an incoherent K band microwave scatterometer carried by an aircraft under moderate wind conditions. A wave attenuation of about 40-60% is observed in the frequency range between 3.2 and 16 Hz. Tank experiments show that a direct influence of oleyl alcohol surface films on wave damping is confined to frequencies equal to or greater than 2 Hz; a further indirect effect of films on the damping of ocean waves in the frequency range between 0.12 and 0.7 Hz (by modifying the wind input and wave-wave interaction mechanisms) is also indicated

Huehnerfuss, H.↗

Local phenomena, chapter 3, part C

Oceanic and coastal phenomena with dimensions ranging to 100 km are dealt with. The two major categories discussed are waves, their generation and dynamics and ocean-land related problems. The dynamics, of surface waves in both capillary and gravity ranges indicates that microwave technology provides a superior means of measuring simultaneously the spatial and temporal properties of ocean waves. The need for basic studies of physical phenomena in support of active microwave sensing is indicated. Active microwave scattering from surface waves is discussed in terms of wave dynamics.

Source record↗

Effects of Different Waveforms on the Performance of Active Capillary Dielectric Barrier Discharge Ionization Mass Spectrometry

Active capillary dielectric barrier discharge ionization (DBDI) is emerging as a compact, low-cost, and robust method to form intact ions of small molecules for detection in near real time by portable mass spectrometers. Here, we demonstrate that by using a 10 kHz, ~2.5 kV{sub p-p} high-voltage square-wave alternating current plasma, active capillary DBDI can consume less than 1 μW of power. In contrast, the power consumed using a sine and triangle alternating current waveform is more than two orders of magnitude higher than that for the square waveform to obtain a similar voltage for plasma generation. Moreover, the plasma obtained using a square waveform can be significantly more homogenous than that obtained using sine and triangle waveforms. Protonated dimethyl methylphosphonate (DMMP) and deprotonated perfluorooctanoic acid (PFOA) can be detected at about the same or higher abundances using square-wave DBDI mass spectrometry compared with the use of sine and triangle waveforms. By use of benzylammonium thermometer ions, the extent of internal energy deposition using square, sine, or triangle waveform excited plasmas are essentially the same at the optimum voltages for ion detection. Using an H-bridge circuit driving a transformer optimized to reduce losses, square-wave active capillary DBDI can be continuously powered for ~50 h by common 9 V-battery (PP3). .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A model and numerical method for compressible flows with capillary effects

A new model for interface problems with capillary effects in compressible fluids is presented together with a specific numerical method to treat capillary flows and pressure waves propagation. This new multiphase model is in agreement with physical principles of conservation and respects the second law of thermodynamics. A new numerical method is also proposed where the global system of equations is split into several submodels. Each submodel is hyperbolic or weakly hyperbolic and can be solved with an adequate numerical method. This method is tested and validated thanks to comparisons with analytical solutions (Laplace law) and with experimental results on droplet breakup induced by a shock wave.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tower Ocean Wave and Radar Dependence experiment - An overview

The Tower Ocean Wave and Radar Dependence experiment was conducted between October 1984 and January 1986 to study the mechanisms involved in the SAR imaging of the ocean surface. Measurements obtained included in situ capillary and short gravity waves, long surface waves and internal waves, ambient current and detailed meteorological measurements, and stereophotography. None of the hypotheses on SAR imaging of long surface waves considered are able to explain all of the present SAR observations.

Shemdin, O. H.↗

Interfacial solitary waves in a two-fluid medium

Solitary waves are generated on the interface between two immiscible liquids with free upper surface; their behavior is generally consistent with that predicted by the Korteweg-de Vries equation. Inviscid theory expanded to include capillary effects predicts unchanged wave speed and narrowed wave shape to first order in amplitude regardless of upper boundary condition; but measured speeds are down 8% and narrowing is substantially greater at very small amplitudes. The speed difference appears consistent with an interfacial viscous boundary layer. The critical depth ratio separating the elevation and depression modes of the stable gravity solitary wave agrees with prediction in the inviscid limit. The design of a programmed, variable flux wave maker for efficiently generating interfacial waves is discussed.

Walker, L. R.↗

Coastal pollution hazards in southern California observed by SAR imagery: stormwater plumes, wastewater plumes, and natural hydrocarbon seeps

Stormwater runoff plumes, municipal wastewater plumes, and natural hydrocarbon seeps are important pollution hazards for the heavily populated Southern California Bight (SCB). Due to their small size, dynamic and episodic nature, these hazards are difficult to sample adequately using traditional in situ oceanographic methods. Complex coastal circulation and persistent cloud cover can further complicate detection and monitoring of these hazards. We use imagery from space-borne synthetic aperture radar (SAR), complemented by field measurements, to examine these hazards in the SCB. The hazards are detectable in SAR imagery because they deposit surfactants on the sea surface, smoothing capillary and small gravity waves to produce areas of reduced backscatter compared with the surrounding ocean. We suggest that high-resolution SAR, which obtains useful data regardless of darkness or cloud cover, could be an important observational tool for assessment and monitoring of coastal marine pollution hazards in the SCB and other urbanized coastal regions.

Water Movements↗

Scale-dependent Ocean Wave Turbulence

Wave turbulence is a common feature of nonlinear wave motions observed when external forcing acts during a long period of time, resulting in developed spectral cascades of energy, momentum, and other conserved integrals. In the ocean, wave turbulence occurs on various scales from capillary ripples, and those of baroclinic inertia-gravity, to Rossby waves. Oceanic wave motions are discussed.

ocean waves wave turbulence wave motions wave ener↗