Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalyst screening”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Microwave Absorbing Perovskite Catalysts for Efficient Electrification of Syngas Production from CO2 and Methane

Microwave absorbing catalysts have the potential to make thermal reactions such as methane reforming (CH4 + CO2 + H2O → H2 + CO) into carbon negative processes when coupled with decarbonized electricity. Due to microwaves directly heating the catalyst rather than heating the reactor and gases, even high temperature reactions such as dry reforming methane (DRM, CH4 + CO2 → H2 + CO) can be achieved rapidly, efficiently, and on-demand, ideal for coupling with intermittent renewable electricity. However, microwave catalysts present unique design challenges due to the same material needing to both efficiently absorb microwaves in oxidative and reductive reaction conditions and be an efficient and stable catalyst in inherently non-isothermal reactors. We screened from over 28 catalysts in the La0.8Sr0.2(Co-Ni-Mn)O3 perovskite solid-solution family to determine promising microwave reforming catalysts and identify design principles for effective materials. The best performing catalyst candidate was able to produce syngas ratios (H2:CO) from 1-3, and scale up testing showed CO and H2 production efficiencies rivaling conventional carbon intensive steam reforming efficiencies at the liters per minute level of production.

Marin, Christopher↗

Synthesis and Characterization of Metal Complexes to be Employed in the Catalytic Depolymerization of Lignin Model Compounds

Lignin is an earth-abundant biopolymer that is grossly underutilized as a value stream in current biomass conversion technologies because there exist no economic and technically feasible routes for lignin depolymerization and upgrading to fuels and chemicals. The development of new mild and selective catalytic routes to depolymerize this recalcitrant biopolymer is required to more effectively utilize lignin. To that end, our group aims to synthesize and characterize a collection of organometallic catalysts to promote atom-economical catalytic lignin deconstruction. These catalysts have been screened against dimeric lignin model compounds in order to gain mechanistic insights into their modes of action. In addition, experimental efforts have been coupled with quantum mechanical calculations to elucidate solution behavior of the catalysts as well as the mechanisms of lignin depolymerization. Detailed synthetic procedures, as well as spectroscopic and crystallographic characterization and DFT calculations will be presented.

09 BIOMASS FUELS↗

Synthesis and Characterization of Transition Metal Complexes Useful for the Catalytic Deconstruction of Lignin

Lignin is an earth-abundant biopolymer that is grossly underutilized as a source of fuels and value-added chemicals. However, lignin is an intractable heteropolymer, which makes it difficult to deconstruct and upgrade in many chemically selective biomass conversion routes. The development of new catalytic routes to depolymerize this recalcitrant biopolymer is required to more effectively utilize lignin. To that end, our group aims to synthesize and characterize a collection of inorganic and organometallic catalysts to promote atom-economical catalytic lignin depolymerization. These catalysts have been screened against a continuum of model compounds and biomass-derived lignin for their usefulness in the deconstruction of these substrates. In addition, we have coupled our experimental efforts with quantum mechanical calculations to elucidate the mechanisms of catalysts to identify the mechanisms of lignin depolymerization. Detailed synthetic procedures, as well as spectroscopic and crystallographic characterization and DFT calculations will be presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion testing of candidates for the alkaline fuel cell cathode

Current/voltage data was obtained for specially made corrosion electrodes of some oxides and of gold materials for the purpose of developing a screening test of catalysts and supports for use at the cathode of the alkaline fuel cell. The data consists of measurements of current at fixed potentials and cyclic voltammograms. These data will have to be correlated with longtime performance data in order to fully evaluate this approach to corrosion screening. Corrosion test screening of candidates for the oxygen reduction electrode of the alkaline fuel cell was applied to two substances, the pyrochlore Pb2Ru2O6.5 and the spinel NiCo2O4. The substrate gold screen and a sample of the IFC Orbiter Pt-Au performance electrode were included as blanks. The pyrochlore data indicate relative stability, although nothing yet can be said about long term stability. The spinel was plainly unstable. For this type of testing to be validated, comparisons will have to be made with long term performance tests.

Singer, Joseph↗

Corrosion testing of candidates for the alkaline fuel cell cathode

Current/voltage data have been obtained for specially made corrosion electrodes of some oxides and of gold materials for the purpose of developing a screening test of catalysts and supports for use at the cathode of the alkaline fuel cell. The data consist of measurements of current at fixed potentials and cyclic voltammograms. These data will have to be correlated with longtime performance data in order to evaluate fully this approach to corrosion screening.

Singer, Joseph↗

Trends in Oxygen Electrocatalysis of 3 d ‐Layered (Oxy)(Hydro)Oxides

Abstract First‐row layered transition metal (oxy)(hydro)oxides (LTMOs) form an important class of earth‐abundant materials. They are well‐known as active alkaline oxygen evolution reaction (OER) catalysts, [1,5] and are also often used as metal‐ion battery anodes [6] or as metal‐air bifunctional electrodes. [7] However, their electrochemical activities, particularly for the oxygen reduction reaction (ORR), across the whole 3d ‐element series remain largely unexplored. In this work, we perform a systematic screening of these catalysts for both OER and ORR using a surface edge‐site model with exposed active sites for metal double hydroxides M(OH) 2 , oxyhydroxides MOOH and oxides MO 2 . We establish OER and ORR activities and scaling relations of the whole series across +2, +3 and +4 oxidation states, and successfully reproduce the experimental activities of a few pure layered (oxy)(hydro)oxides. We predict CoOOH/CoO 2 and NiOOH/NiO 2 as active and stable OER catalysts. We also predict Fe(OH) 2 /FeOOH, Mn(OH) 2 /MnOOH and Co(OH) 2 as active and stable ORR catalysts. This makes Co‐(oxy)(hydro)oxides only bifunctional catalyst in this series. Using linear regression, our results indicate that trends across the 3d ‐series can be obtained from only a few bulk, surface and atomic type descriptors. Particularly, we identify that the number of outer d ‐electrons at the surface‐active site as the most important descriptor of activity.

Zhao, Zhenghang↗

Clarifying trust of materials property predictions using neural networks with distribution-specific uncertainty quantification

It is critical that machine learning (ML) model predictions be trustworthy for high-throughput catalyst discovery approaches. Uncertainty quantification (UQ) methods allow estimation of the trustworthiness of an ML model, but these methods have not been well explored in the field of heterogeneous catalysis. Herein, we investigate different UQ methods applied to a crystal graph convolutional neural network to predict adsorption energies of molecules on alloys from the Open Catalyst 2020 dataset, the largest existing heterogeneous catalyst dataset. We apply three UQ methods to the adsorption energy predictions, namely k-fold ensembling, Monte Carlo dropout, and evidential regression. The effectiveness of each UQ method is assessed based on accuracy, sharpness, dispersion, calibration, and tightness. Evidential regression is demonstrated to be a powerful approach for rapidly obtaining tunable, competitively trustworthy UQ estimates for heterogeneous catalysis applications when using neural networks. Recalibration of model uncertainties is shown to be essential in practical screening applications of catalysts using uncertainties.

36 MATERIALS SCIENCE↗

First-principles thermodynamic screening approach to photo-catalytic water splitting with co-catalysts

We adapt the computational hydrogen electrode approach to explicitly account for photo-generated charges and use it to computationally screen for viable catalyst/co-catalyst combinations for photo-catalytic water splitting. The hole energy necessary to thermodynamically drive the reaction is employed as descriptor for the screening process. Using this protocol and hybrid-level density-functional theory, we show that water oxidation on bare TiO{sub 2} surfaces is thermodynamically more complex than previously thought. This motivates a screening for suitable co-catalysts for this half-reaction, which we carry out for Au particles down to the non-scalable size regime. We find that almost all small Au clusters studied are better suited for water photo-oxidation than an extended Au(111) surface or bare TiO{sub 2} facets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Salt Hydrate Eutectic Thermal Energy Storage for Building Thermal Regulation (Final Technical Report)

Thermal energy storage is anticipated to play an important role in developing the power grid of the future - a power grid that meets increasing demands of users, is resistant to disruptions, but also allows for greater penetration of renewable resources. Specifically, thermal energy storage materials can be integrated into HVAC systems and building envelopes, where they can be used to shift power demands for building climate control from periods of peak demand to periods of low demand. Phase change materials (PCMs) are compelling as low-cost, high energy density thermal energy storage materials for building thermal management. However, there is a lack of high performance low-cost PCMs within the specific temperature ranges which would most effectively allow for power load shifting. Inorganic salt hydrates represent a promising class of PCMs, but their inherent limitations cause them to be currently unavailable for reliable building applications. The overarching goals of this research effort are to: 1) Discover low-cost, high volumetric density salt hydrate eutectic PCMs to store low-quality heat (10 to 40 °C); 2) Introduce a high thermal conductivity matrix to reduce the time constant for energy storage to ~0.1 to 1 hr, incorporate nucleation catalysts to decrease undercooling, and utilize microencapsulation and shape stabilization approaches, minimizing moisture loss/gain, mitigating phase separation, and maintaining stable melting behavior over the lifetime of the compounds; 3) Evaluate the impact these systems have on peak load shifting, and the potential for overall energy savings under different climatic scenarios and building configurations. These goals will be achieved by an integrated research program consisting of six cohesive research subtasks: 1) Materials discovery of eutectic salt hydrate PCMs by using computationally predicted thermodynamic equilibria, coupled with high-throughput experimental validation, 2) Rapid experimental screening of nucleation catalysts identified through robust computational databases, 3) Embedding salt hydrate PCM into a low cost and scalable high conductivity matrix, 4) Microencapsulation of salt hydrate microspheres using hybrid inorganic-polymer microencapsulation approach, 5) Shape stabilization by thermoreversible salt hydrate salogels, and 6) Analysis of end-use using thermal simulations, and characterization of mock-up energy storage finished components.

25 ENERGY STORAGE↗

Corrosion testing of candidates for the alkaline fuel cell cathode

It is desirable to employ a corrosion screening test for catalyst or support candidates for the fuel cell cathode before entering upon optimization of the candidate or of the catalytic electrode. To this end, corrosion test electrodes, intended for complete immersion and maximum wetting, have been made with 30 to 40 vol. pct Teflon; with perovskites this is about 10 to 15 pct. The candidates were synthesized by methods intended for single-phase product without special emphasis on high surface area, although the substances tested were no coarser than 2 m squared/g. A typical loading was 25 mg/cm sq of the pure substance, usually on gold screen, a few mm squared of which were left bare for contacting. Contact to the gold lead wire was made by welding with a micro-torch or a spot-welder. Corrosion testing consisted of obtaining current-voltage data under flowing inert gas in the potential region for reduction of O2. The electrode was immersed in 30 pct KOH. Observations were made at 20 C and 80 C, and the results compared with data from gold standards. Results with some perovskites, pyrochlores, spinels, and interstitial compounds will be discussed.

Singer, Joseph↗

Control of Ionomer Distribution in Roll-to-Roll Coated Fuel Cell Catalyst Layers

Fuel cell catalyst layers are a complex mixture of catalyst particles and ion-conducting polymers. The performance of catalyst layers is highly dependent on microstructure, which must balance proton and electron conduction with gas transport. As fuel cells transition from the laboratory to industrial production for vehicles and other applications, there is a need to understand how manufacturing processes impact the microstructure and, ultimately, the performance of catalyst layers. In this work, we have focused on the roll-to-roll coating of catalyst layers for proton exchange membrane fuel cells. The catalyst layers are responsible for the electrochemical reactions that enable power production. In these devices the catalyst is commonly a Pt nanoparticle supported on porous carbon blacks. The ion conducting polymer, or ionomer, is typically a perfluorosulfonic acid. The most common being Nafion. To fabricate the catalyst layer, the catalyst particles are dispersed in an ink with the ionomer and cast to form the catalyst layer. Commonly, laboratory samples are prepared using spray coating or hand painting, which effectively coat many thin layers to achieve the desired catalyst layer thickness. This creates catalyst layers with uniform distributions of materials throughout the thickness of the full catalyst layer. In contrast, roll-to-roll methods, like slot die, gravure or screen printing, coat the catalyst layer as a single wet film. As the film dries, ink constituents are able to segregate, leading to a heterogeneous distribution of materials through the thickness of the layer. It is also known that the choice of solvent and drying rate can affect the morphology of the catalyst layer. Thus, there is a need to understand how ink formulation and the drying process influence the distribution of materials and catalyst layer morphology. Here, we have explored the influence of solvent and drying rate on morphology of roll-to-roll coated catalyst layers. We show the development of the Kelvin probe method as a rapid screening technique for qualitative analysis of ionomer distribution. We also utilize nano X-ray computed tomography to visualize electrode structure and to quantify particle-size and pore-size distributions, thickness-dependent ionomer distribution, tortuosity, and effective transport properties. We find that solvent has a strong influence on ionomer distribution, with less of an effect on porosity. Conversely, drying temperature has a strong influence on porosity, but less influence on ionomer distribution. Finally, we utilize in situ fuel cell performance testing and other advanced diagnostics to quantify the impact of catalyst layer properties on fuel cell performance and demonstrate that roll-to-roll coating is capable of coating high performance catalyst layers in multi-meter lengths.

14 SOLAR ENERGY↗

Automated descriptor selection, volcano curve generation, and active site determination using the DescMAP software

The material space for catalyst discovery is expansive. Volcano curves are traditionally employed to provide physical insights into optimal catalyst characteristics for new material selection. Their generation lies on a single descriptor picked using expert knowledge. Here we present DescMAP, a Python-based software, to automate the selection of descriptors, the generation of volcano maps, and the identification of active sites for structure-sensitive reactions. Here, we consider traditional energy-based and geometric descriptors for structure-sensitive reactions. DescMAP is integrated with the Virtual Kinetic Laboratory (VLab) to provide multiple functionalities. It inputs spreadsheets or template files for flexibility and outputs interactive graphs for post-processing. We demonstrate its features using the non-oxidative dehydrogenation of ethane to ethylene over (111) closed-packed surfaces and the methane total oxidation over various Pt facets. It can be easily applied to other complex chemistries and achieves quick screening of potential catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal Independent Correlations for Site-specific Binding Energies of Relevant Catalytic Intermediates

Establishing energy correlations among different metals can accelerate the discovery of efficient and cost-effective catalysts for complex reactions. Using a recently introduced coordination-based model, we can predict site specific metal binding energies (∆EM) that can be used as a descriptor for chemical reactions. In this study, we have examined a range of metals including Ag, Au, Co, Cu, Ir, Ni, Os, Pd, Pt, Rh, and Ru and found linear correlations between predicted ∆EM and adsorption energies of CH and O (∆ECH and ∆EO) at various coordination environment for all the considered metals. Interestingly, all the metals correlate with one another under specific surface site coordination, indicating that different metals are interrelated in a particular coordination environment. Furthermore, we have tested and verified for PtPd and PtIr-based alloys that they follow a similar behavior. Moreover, we have expanded the metal space by taking some early transition metals along with few s-block metals and shown a cyclic behavior of the adsorbate binding energy (∆EA) versus ∆EM. Therefore, ∆ECH and ∆EO can be efficiently interpolated between metals, alloys and intermetallics based on information related to one metal only. This simplifies the process of screening new metal catalyst formulations and their reaction energies.

Density function theory↗

Rationalizing the Reactivity of Bimetallic Molecular Catalysts for CO 2 Hydrogenation

In this study, we have recently reported the heterobimetallic nickel–gallium complex, NiGaL (where L represents the tris(phosphinoamido)amine ligand, [N( o -(NCH 2 P i -Pr 2 ) C 6 H 4 ) 3 ] 3– ), which is the most active Ni-based molecular catalyst for CO 2 hydrogenation to date. Understanding the reaction mechanism of this catalytic system and identifying the factors that govern its catalytic activity are important in order to design even more efficient base–metal catalysts. Here, we present a computational study of possible reaction pathways for CO 2 hydrogenation catalyzed by NiGaL. The most favorable predicted pathway for formate production agrees well with key experimental observations and is defined by four elementary steps: (1) H 2 binding to the Ni center, (2) deprotonation of the H 2 adduct, (3) hydride transfer to CO 2 to form a formate adduct, and (4) formate release to regenerate NiGaL. The overall catalytic process has two main time periods: an induction period, during which the deprotonation of the H 2 adduct by exogenous base is predicted to be rate-limiting, followed by a subsequent period where the produced formate assists in deprotonation by acting as a proton shuttle between the H 2 adduct and exogenous base. The barrier for H 2 adduct deprotonation is governed predominantly by the steric hindrance associated with the exogenous base and is found to be dramatically lowered by formate assistance. Once sufficient formate has been generated, the catalysis enters the steady-state period, during which hydride transfer to CO 2 is predicted to become rate-limiting once sufficient formate has been generated and the reaction rate remains constant until the base is nearly consumed. For hydride transfer to CO 2 , the free energy of activation was found to depend linearly on the thermodynamic hydricity for a series of bimetallic HM 1 M 2 L– complexes, providing a simple and efficient strategy for screening other bimetallic catalysts. Furthermore, the relative binding energies of H 2 and formate were analyzed to predict the ability of the bimetallics to facilitate the catalytic turnover. The predicted trends and structure–activity relationships arising from these computational calculations can be further utilized for the rational design of more efficient catalysts for CO 2 hydrogenation and other hydride transfer processes for which reactive M–H species are generated in the presence of a Lewis base.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and Synthesis of PtPdNiCoMn High‐Entropy Alloy Electrocatalyst for Enhanced Alkaline Hydrogen Evolution Reaction: A Theoretically Supported Predictive Design Approach

Electrocatalytic hydrogen generation requires a multifunctional electrocatalyst with abundant active sites to drive multielectron transfer reactions. High entropy alloys (HEA) are five or more-elements with high configurational entropy are considered unique materials for next-generation electrocatalysts. Here, in this work, based on new screening guidelines for catalyst selections that combine density-functional theory calculated Gibbs formation-enthalpy with bond length and electronegativity variance, a novel HEA electrocatalyst consisting of five elements, namely, Pt, Pd, Ni, Co, and Mn has been designed. By simple room temperature electrodeposition, the designed catalyst is prepared and its hydrogen evolution reaction (HER) is explored and validated through experimental and theoretical approaches. The HEA demonstrated a superior HER activity with an overpotential of 22.6 mV at -10 mA cm -2 which outperforms Pt/C commercial catalyst. No evident degradation of the material is detected even after 100 hours of continuous operation under high current density. Moreover, the HEA has shown exceptional performance in harsh electrolyte conditions such as in simulated seawater and actual seawater. Remarkably, the density-functional theory calculated Gibbs formation-enthalpy is small (≈0 eV) compared to Pt/C placing the new HEA near the apex of Trasatti's model of Volcano plot, which is also suggestive of superior HER activity.

36 MATERIALS SCIENCE↗

Exploring the Potential of Fulvalene Dimetals as Platforms for Molecular Solar Thermal Energy Storage: Computations, Syntheses, Structures, Kinetics, and Catalysis

A study of the scope and limitations of varying the ligand framework around the dinuclear core of FvRu(2) in its function as a molecular solar thermal energy storage framework is presented. It includes DFT calculations probing the effect of substituents, other metals, and CO exchange for other ligands on Delta H-storage. Experimentally, the system is shown to be robust in as much as it tolerates a number of variations, except for the identity of the metal and certain substitution patterns. Failures include 1,1',3,3'-tetra-tert-butyl (4), 1,2,2',3'-tetraphenyl (9), diiron (28), diosmium (24), mixed iron-ruthenium (27), dimolybdenum (29), and di-tungsten (30) derivatives. An extensive screen of potential catalysts for the thermal reversal identified AgNO3-SiO2 as a good candidate, although catalyst decomposition remains a challenge.

Borjesson, K↗

Mechanistic Insights into the Demethylation of Lignin‐Derived Structures Using Protic Ionic Liquids: A Density Functional Theory Study

Lignin valorization is restricted by the stability of its methoxy groups, creating a critical need for efficient demethylation strategies. Here, in this study, density functional theory (DFT) is employed to dissect the mechanistic pathways of demethylation in lignin model compounds, guaiacol and syringol, using protic ionic liquids (PILs) that act as both solvent and catalyst. Conductor‐like Screening Model for Real Solvents (COSMO‐RS) analysis identifies monoethanolammonium acetate ([MEOA][Ace]) as the most promising medium, attributed to its strong hydrogen bonding network and solvation ability. By integrating implicit and explicit solvation models, it is revealed that an acid‐catalyzed hydrolytic mechanism governs demethylation, with PILs stabilizing crucial transition states and intermediates. Complementary electronic structure evaluations, including highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gap analysis, charge distribution, and electrostatic potential mapping, demonstrate how PILs lower energetic barriers and enhance reactivity. To simulate realistic environments, this study is extended to lignin dimer complexes with varying water content, uncovering how water‐bridged solvation reverses demethylation preference from guaiacyl to syringyl units. This mechanistic shift aligns with experimental observations showing faster S‐unit reactivity in hydrated systems. Together, these findings provide atomic‐level insight into lignin demethylation dynamics and highlight how tuning acid concentration in PILs can accelerate kinetics, enabling a rational pathway toward next‐generation biomass conversion technologies.

COSMO-RS↗